From: Domen Puncer <domen.puncer@telargo.com>
To: linuxppc-dev@ozlabs.org
Cc: David Brownell <david-b@pacbell.net>, Sylvain Munaut <tnt@246tNt.com>
Subject: [PATCH 1/3] powerpc clk.h interface for platforms
Date: Wed, 11 Jul 2007 11:32:20 +0200 [thread overview]
Message-ID: <20070711093220.GF4375@moe.telargo.com> (raw)
In-Reply-To: <20070711093113.GE4375@moe.telargo.com>
clk interface for arch/powerpc, platforms should fill
clk_functions.
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
---
arch/powerpc/kernel/Makefile | 3 -
arch/powerpc/kernel/clock.c | 82 ++++++++++++++++++++++++++++++++++++
include/asm-powerpc/clk_interface.h | 20 ++++++++
3 files changed, 104 insertions(+), 1 deletion(-)
Index: work-powerpc.git/arch/powerpc/kernel/clock.c
===================================================================
--- /dev/null
+++ work-powerpc.git/arch/powerpc/kernel/clock.c
@@ -0,0 +1,82 @@
+/*
+ * Dummy clk implementations for powerpc.
+ * These need to be overridden in platform code.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <asm/clk_interface.h>
+
+struct clk_interface clk_functions;
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ if (clk_functions.clk_get)
+ return clk_functions.clk_get(dev, id);
+ return ERR_PTR(-ENOSYS);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ if (clk_functions.clk_put)
+ clk_functions.clk_put(clk);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ if (clk_functions.clk_enable)
+ return clk_functions.clk_enable(clk);
+ return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ if (clk_functions.clk_disable)
+ clk_functions.clk_disable(clk);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (clk_functions.clk_get_rate)
+ return clk_functions.clk_get_rate(clk);
+ return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk_functions.clk_round_rate)
+ return clk_functions.clk_round_rate(clk, rate);
+ return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk_functions.clk_set_rate)
+ return clk_functions.clk_set_rate(clk, rate);
+ return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (clk_functions.clk_get_parent)
+ return clk_functions.clk_get_parent(clk);
+ return ERR_PTR(-ENOSYS);
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ if (clk_functions.clk_set_parent)
+ return clk_functions.clk_set_parent(clk, parent);
+ return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_set_parent);
Index: work-powerpc.git/include/asm-powerpc/clk_interface.h
===================================================================
--- /dev/null
+++ work-powerpc.git/include/asm-powerpc/clk_interface.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_POWERPC_CLK_INTERFACE_H
+#define __ASM_POWERPC_CLK_INTERFACE_H
+
+#include <linux/clk.h>
+
+struct clk_interface {
+ struct clk* (*clk_get) (struct device *dev, const char *id);
+ int (*clk_enable) (struct clk *clk);
+ void (*clk_disable) (struct clk *clk);
+ unsigned long (*clk_get_rate) (struct clk *clk);
+ void (*clk_put) (struct clk *clk);
+ long (*clk_round_rate) (struct clk *clk, unsigned long rate);
+ int (*clk_set_rate) (struct clk *clk, unsigned long rate);
+ int (*clk_set_parent) (struct clk *clk, struct clk *parent);
+ struct clk* (*clk_get_parent) (struct clk *clk);
+};
+
+extern struct clk_interface clk_functions;
+
+#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
Index: work-powerpc.git/arch/powerpc/kernel/Makefile
===================================================================
--- work-powerpc.git.orig/arch/powerpc/kernel/Makefile
+++ work-powerpc.git/arch/powerpc/kernel/Makefile
@@ -12,7 +12,8 @@ endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
- init_task.o process.o systbl.o idle.o
+ init_task.o process.o systbl.o idle.o \
+ clock.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o \
next prev parent reply other threads:[~2007-07-11 9:44 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-11 9:31 [PATCH 0/3] clock (clk.h) framework for mpc52xx Domen Puncer
2007-07-11 9:32 ` Domen Puncer [this message]
2007-07-11 10:36 ` [PATCH 1/3] powerpc clk.h interface for platforms Christoph Hellwig
2007-07-11 10:36 ` Christoph Hellwig
2007-07-11 15:56 ` David Brownell
2007-07-11 15:56 ` David Brownell
2007-07-11 16:16 ` Christoph Hellwig
2007-07-11 16:16 ` Christoph Hellwig
2007-07-11 17:02 ` David Brownell
2007-07-11 17:02 ` David Brownell
2007-07-11 20:34 ` Russell King
2007-07-11 20:34 ` Russell King
2007-07-11 20:52 ` David Brownell
2007-07-11 20:52 ` David Brownell
2007-07-13 9:12 ` Domen Puncer
2007-07-13 9:12 ` Domen Puncer
2007-08-01 7:28 ` Generic clk.h wrappers? [Was: Re: [PATCH 1/3] powerpc clk.h interface for platforms] Domen Puncer
2007-08-01 7:28 ` Domen Puncer
2007-08-01 12:57 ` Christoph Hellwig
2007-08-01 12:57 ` Christoph Hellwig
2007-08-02 23:32 ` David Brownell
2007-08-02 23:32 ` David Brownell
2007-08-03 8:36 ` Russell King
2007-08-03 8:36 ` Russell King
2007-08-06 6:58 ` [PATCH 1/3] powerpc clk.h interface for platforms Domen Puncer
2007-09-19 3:47 ` Paul Mackerras
2007-09-19 5:11 ` Domen Puncer
2007-09-20 5:07 ` Paul Mackerras
2007-09-20 14:00 ` [PATCH 1/3 v2] " Domen Puncer
2007-07-11 9:33 ` [PATCH 2/3] mpc52xx clk.h interface Domen Puncer
2007-07-11 9:34 ` [PATCH 3/3] mpc52xx_psc_spi: use clk.h subsystem Domen Puncer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070711093220.GF4375@moe.telargo.com \
--to=domen.puncer@telargo.com \
--cc=david-b@pacbell.net \
--cc=linuxppc-dev@ozlabs.org \
--cc=tnt@246tNt.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.