Re: [RFC PATCH v0.1] net driver: mpc52xx fec

[Domen Puncer <domen@coderock.org>]

Hi!

On 10/08/07 11:51 +0200, Domen Puncer wrote:
> Index: work-powerpc.git/arch/powerpc/boot/dts/lite5200b.dts
> ===================================================================
> --- work-powerpc.git.orig/arch/powerpc/boot/dts/lite5200b.dts
> +++ work-powerpc.git/arch/powerpc/boot/dts/lite5200b.dts
> +		mdio@3000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			device_type = "mdio";
> +			compatible = "mpc5200b-fec-phy";
> +			reg = <3000 400>;	// fec range, since we need to setup fec interrupts
> +			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
> +			interrupt-parent = <&mpc5200_pic>;
> +
> +			phy0:ethernet-phy@0 {
> +				device_type = "ethernet-phy";
> +				reg = <0>;
> +			};
>  		};

I am struggling with this part on Efika.
I would like to add this to the device tree from
fixup_device_tree_efika() (arch/powerpc/kernel/prom_init.c).

AFAICS client-services doesn't offer anything like new-device,
so I guess "interpret" or "call-method" will have to be used.

I have read some docs, but I'm still wandering in the dark.
Can I please get an example?
Pretty please with a cherry on top?


	Domen