From: travis@sgi.com
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, Andi Kleen <ak@suse.de>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
sparclinux@vger.kernel.org, Christoph Lameter <clameter@sgi.com>
Subject: [PATCH 02/10] x86: fix cpu_to_node references (v3)
Date: Tue, 11 Sep 2007 18:56:46 -0700 [thread overview]
Message-ID: <20070912015645.566522143@sgi.com> (raw)
In-Reply-To: 20070912015644.927677070@sgi.com
Fix four instances where cpu_to_node is referenced
by array instead of via the cpu_to_node macro. This
is preparation to moving it to the per_cpu data area.
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86_64/kernel/vsyscall.c | 2 +-
arch/x86_64/mm/numa.c | 4 ++--
arch/x86_64/mm/srat.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -291,7 +291,7 @@
unsigned long *d;
unsigned long node = 0;
#ifdef CONFIG_NUMA
- node = cpu_to_node[cpu];
+ node = cpu_to_node(cpu);
#endif
if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP))
write_rdtscp_aux((node << 12) | cpu);
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -261,7 +261,7 @@
We round robin the existing nodes. */
rr = first_node(node_online_map);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] != NUMA_NO_NODE)
+ if (cpu_to_node(i) != NUMA_NO_NODE)
continue;
numa_set_node(i, rr);
rr = next_node(rr, node_online_map);
@@ -543,7 +543,7 @@
void __cpuinit numa_set_node(int cpu, int node)
{
cpu_pda(cpu)->nodenumber = node;
- cpu_to_node[cpu] = node;
+ cpu_to_node(cpu) = node;
}
unsigned long __init numa_free_all_bootmem(void)
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -431,9 +431,9 @@
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] == NUMA_NO_NODE)
+ if (cpu_to_node(i) == NUMA_NO_NODE)
continue;
- if (!node_isset(cpu_to_node[i], node_possible_map))
+ if (!node_isset(cpu_to_node(i), node_possible_map))
numa_set_node(i, NUMA_NO_NODE);
}
numa_init_array();
--
WARNING: multiple messages have this Message-ID (diff)
From: travis@sgi.com
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>, Christoph Lameter <clameter@sgi.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org, sparclinux@vger.kernel.org
Subject: [PATCH 02/10] x86: fix cpu_to_node references (v3)
Date: Wed, 12 Sep 2007 01:56:46 +0000 [thread overview]
Message-ID: <20070912015645.566522143@sgi.com> (raw)
In-Reply-To: 20070912015644.927677070@sgi.com
Fix four instances where cpu_to_node is referenced
by array instead of via the cpu_to_node macro. This
is preparation to moving it to the per_cpu data area.
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86_64/kernel/vsyscall.c | 2 +-
arch/x86_64/mm/numa.c | 4 ++--
arch/x86_64/mm/srat.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -291,7 +291,7 @@
unsigned long *d;
unsigned long node = 0;
#ifdef CONFIG_NUMA
- node = cpu_to_node[cpu];
+ node = cpu_to_node(cpu);
#endif
if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP))
write_rdtscp_aux((node << 12) | cpu);
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -261,7 +261,7 @@
We round robin the existing nodes. */
rr = first_node(node_online_map);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] != NUMA_NO_NODE)
+ if (cpu_to_node(i) != NUMA_NO_NODE)
continue;
numa_set_node(i, rr);
rr = next_node(rr, node_online_map);
@@ -543,7 +543,7 @@
void __cpuinit numa_set_node(int cpu, int node)
{
cpu_pda(cpu)->nodenumber = node;
- cpu_to_node[cpu] = node;
+ cpu_to_node(cpu) = node;
}
unsigned long __init numa_free_all_bootmem(void)
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -431,9 +431,9 @@
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] = NUMA_NO_NODE)
+ if (cpu_to_node(i) = NUMA_NO_NODE)
continue;
- if (!node_isset(cpu_to_node[i], node_possible_map))
+ if (!node_isset(cpu_to_node(i), node_possible_map))
numa_set_node(i, NUMA_NO_NODE);
}
numa_init_array();
--
WARNING: multiple messages have this Message-ID (diff)
From: travis@sgi.com
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>, Christoph Lameter <clameter@sgi.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org, sparclinux@vger.kernel.org
Subject: [PATCH 02/10] x86: fix cpu_to_node references (v3)
Date: Tue, 11 Sep 2007 18:56:46 -0700 [thread overview]
Message-ID: <20070912015645.566522143@sgi.com> (raw)
In-Reply-To: 20070912015644.927677070@sgi.com
[-- Attachment #1: fix-cpu_to_node-refs --]
[-- Type: text/plain, Size: 1698 bytes --]
Fix four instances where cpu_to_node is referenced
by array instead of via the cpu_to_node macro. This
is preparation to moving it to the per_cpu data area.
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86_64/kernel/vsyscall.c | 2 +-
arch/x86_64/mm/numa.c | 4 ++--
arch/x86_64/mm/srat.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -291,7 +291,7 @@
unsigned long *d;
unsigned long node = 0;
#ifdef CONFIG_NUMA
- node = cpu_to_node[cpu];
+ node = cpu_to_node(cpu);
#endif
if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP))
write_rdtscp_aux((node << 12) | cpu);
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -261,7 +261,7 @@
We round robin the existing nodes. */
rr = first_node(node_online_map);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] != NUMA_NO_NODE)
+ if (cpu_to_node(i) != NUMA_NO_NODE)
continue;
numa_set_node(i, rr);
rr = next_node(rr, node_online_map);
@@ -543,7 +543,7 @@
void __cpuinit numa_set_node(int cpu, int node)
{
cpu_pda(cpu)->nodenumber = node;
- cpu_to_node[cpu] = node;
+ cpu_to_node(cpu) = node;
}
unsigned long __init numa_free_all_bootmem(void)
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -431,9 +431,9 @@
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] == NUMA_NO_NODE)
+ if (cpu_to_node(i) == NUMA_NO_NODE)
continue;
- if (!node_isset(cpu_to_node[i], node_possible_map))
+ if (!node_isset(cpu_to_node(i), node_possible_map))
numa_set_node(i, NUMA_NO_NODE);
}
numa_init_array();
--
WARNING: multiple messages have this Message-ID (diff)
From: travis@sgi.com
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>, Christoph Lameter <clameter@sgi.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org, sparclinux@vger.kernel.org
Subject: [PATCH 02/10] x86: fix cpu_to_node references (v3)
Date: Tue, 11 Sep 2007 18:56:46 -0700 [thread overview]
Message-ID: <20070912015645.566522143@sgi.com> (raw)
In-Reply-To: 20070912015644.927677070@sgi.com
[-- Attachment #1: fix-cpu_to_node-refs --]
[-- Type: text/plain, Size: 1924 bytes --]
Fix four instances where cpu_to_node is referenced
by array instead of via the cpu_to_node macro. This
is preparation to moving it to the per_cpu data area.
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86_64/kernel/vsyscall.c | 2 +-
arch/x86_64/mm/numa.c | 4 ++--
arch/x86_64/mm/srat.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -291,7 +291,7 @@
unsigned long *d;
unsigned long node = 0;
#ifdef CONFIG_NUMA
- node = cpu_to_node[cpu];
+ node = cpu_to_node(cpu);
#endif
if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP))
write_rdtscp_aux((node << 12) | cpu);
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -261,7 +261,7 @@
We round robin the existing nodes. */
rr = first_node(node_online_map);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] != NUMA_NO_NODE)
+ if (cpu_to_node(i) != NUMA_NO_NODE)
continue;
numa_set_node(i, rr);
rr = next_node(rr, node_online_map);
@@ -543,7 +543,7 @@
void __cpuinit numa_set_node(int cpu, int node)
{
cpu_pda(cpu)->nodenumber = node;
- cpu_to_node[cpu] = node;
+ cpu_to_node(cpu) = node;
}
unsigned long __init numa_free_all_bootmem(void)
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -431,9 +431,9 @@
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
for (i = 0; i < NR_CPUS; i++) {
- if (cpu_to_node[i] == NUMA_NO_NODE)
+ if (cpu_to_node(i) == NUMA_NO_NODE)
continue;
- if (!node_isset(cpu_to_node[i], node_possible_map))
+ if (!node_isset(cpu_to_node(i), node_possible_map))
numa_set_node(i, NUMA_NO_NODE);
}
numa_init_array();
--
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2007-09-12 1:56 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-12 1:56 [PATCH 00/10] x86: Reduce Memory Usage and Inter-Node message traffic (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` [PATCH 01/10] x86: remove x86_cpu_to_log_apicid array (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis [this message]
2007-09-12 1:56 ` [PATCH 02/10] x86: fix cpu_to_node references (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` [PATCH 03/10] x86: Convert cpu_core_map to be a per cpu variable (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` [PATCH 04/10] x86: Convert cpu_sibling_map " travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` [PATCH 05/10] x86: Convert x86_cpu_to_apicid " travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` [PATCH 06/10] x86: Convert cpu_llc_id " travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` [PATCH 07/10] x86: acpi-use-cpu_physical_id (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` [PATCH 08/10] ia64: Convert cpu_sibling_map to a per_cpu data array (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-28 9:49 ` Paul Jackson
2007-09-28 9:49 ` Paul Jackson
2007-09-28 9:49 ` Paul Jackson
2007-09-28 9:49 ` [PATCH 08/10] ia64: Convert cpu_sibling_map to a per_cpu data Paul Jackson
2007-10-03 19:22 ` [PATCH 08/10] ia64: Convert cpu_sibling_map to a per_cpu data array (v3) Mike Travis
2007-10-03 19:22 ` Mike Travis
2007-10-03 19:22 ` Mike Travis
2007-10-03 19:22 ` [PATCH 08/10] ia64: Convert cpu_sibling_map to a per_cpu data Mike Travis
2007-09-12 1:56 ` [PATCH 09/10] ppc64: Convert cpu_sibling_map to a per_cpu data array (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-17 6:28 ` Stephen Rothwell
2007-09-17 6:28 ` Stephen Rothwell
2007-09-17 6:28 ` [PATCH 09/10] ppc64: Convert cpu_sibling_map to a per_cpu data Stephen Rothwell
2007-09-17 6:39 ` [PATCH 09/10] ppc64: Convert cpu_sibling_map to a per_cpu data array (v3) Stephen Rothwell
2007-09-17 6:39 ` Stephen Rothwell
2007-09-17 6:39 ` [PATCH 09/10] ppc64: Convert cpu_sibling_map to a per_cpu data Stephen Rothwell
2007-09-17 15:22 ` [PATCH 09/10] ppc64: Convert cpu_sibling_map to a per_cpu data array (v3) Mike Travis
2007-09-17 15:22 ` Mike Travis
2007-09-17 15:22 ` Mike Travis
2007-09-17 15:22 ` [PATCH 09/10] ppc64: Convert cpu_sibling_map to a per_cpu data Mike Travis
2007-09-12 1:56 ` [PATCH 10/10] sparc64: Convert cpu_sibling_map to a per_cpu data array (v3) travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-12 1:56 ` travis
2007-09-13 9:53 ` [PATCH 00/10] x86: Reduce Memory Usage and Inter-Node message traffic (v3) Andi Kleen
2007-09-13 9:53 ` Andi Kleen
2007-09-13 9:53 ` Andi Kleen
2007-09-13 9:53 ` Andi Kleen
2007-09-14 23:32 ` Andrew Morton
2007-09-14 23:32 ` Andrew Morton
2007-09-14 23:32 ` Andrew Morton
2007-09-14 23:32 ` [PATCH 00/10] x86: Reduce Memory Usage and Inter-Node message Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070912015645.566522143@sgi.com \
--to=travis@sgi.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=clameter@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.