From: Auke Kok <auke-jan.h.kok@intel.com>
To: jeff@garzik.org
Cc: netdev@vger.kernel.org, jesse.brandeburg@intel.com,
john.ronciak@intel.com
Subject: [PATCH 3/4] e1000/e1000e: Move PCI-Express device IDs over to e1000e
Date: Wed, 31 Oct 2007 15:22:05 -0700 [thread overview]
Message-ID: <20071031222205.17411.8456.stgit@localhost.localdomain> (raw)
In-Reply-To: <20071031222152.17411.20977.stgit@localhost.localdomain>
e1000e will from now on support the PCI-Express adapters that
previously were supported by e1000. This support means better
performance and easier debugging from now on for both the old
PCI-X/PCI hardware and PCI-Express adapters.
This patch also moves 3 recently merged device IDs over to e1000e
that are identical to quad-port versions of already existing
dual port versions. With this last bit every former e1000 pci-e
device should work now with e1000e.
Here is a brief list of which gigabit driver to use with which
adapter:
e1000:
82540 -> 82547
e1000e:
82571 -> 82573
ich8, ich9 (82562 or 82566)
es2lan (80003eslan)
igb: (not yet merged, only available from e1000.sf.net)
82575
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---
drivers/net/e1000/e1000_main.c | 27 ---------------------------
drivers/net/e1000e/82571.c | 6 ++++++
drivers/net/e1000e/hw.h | 3 +++
drivers/net/e1000e/netdev.c | 9 +++------
4 files changed, 12 insertions(+), 33 deletions(-)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 72deff0..d1b88e4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -73,14 +73,6 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1026),
INTEL_E1000_ETHERNET_DEVICE(0x1027),
INTEL_E1000_ETHERNET_DEVICE(0x1028),
- INTEL_E1000_ETHERNET_DEVICE(0x1049),
- INTEL_E1000_ETHERNET_DEVICE(0x104A),
- INTEL_E1000_ETHERNET_DEVICE(0x104B),
- INTEL_E1000_ETHERNET_DEVICE(0x104C),
- INTEL_E1000_ETHERNET_DEVICE(0x104D),
- INTEL_E1000_ETHERNET_DEVICE(0x105E),
- INTEL_E1000_ETHERNET_DEVICE(0x105F),
- INTEL_E1000_ETHERNET_DEVICE(0x1060),
INTEL_E1000_ETHERNET_DEVICE(0x1075),
INTEL_E1000_ETHERNET_DEVICE(0x1076),
INTEL_E1000_ETHERNET_DEVICE(0x1077),
@@ -89,28 +81,9 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x107A),
INTEL_E1000_ETHERNET_DEVICE(0x107B),
INTEL_E1000_ETHERNET_DEVICE(0x107C),
- INTEL_E1000_ETHERNET_DEVICE(0x107D),
- INTEL_E1000_ETHERNET_DEVICE(0x107E),
- INTEL_E1000_ETHERNET_DEVICE(0x107F),
INTEL_E1000_ETHERNET_DEVICE(0x108A),
- INTEL_E1000_ETHERNET_DEVICE(0x108B),
- INTEL_E1000_ETHERNET_DEVICE(0x108C),
- INTEL_E1000_ETHERNET_DEVICE(0x1096),
- INTEL_E1000_ETHERNET_DEVICE(0x1098),
INTEL_E1000_ETHERNET_DEVICE(0x1099),
- INTEL_E1000_ETHERNET_DEVICE(0x109A),
- INTEL_E1000_ETHERNET_DEVICE(0x10A4),
- INTEL_E1000_ETHERNET_DEVICE(0x10A5),
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
- INTEL_E1000_ETHERNET_DEVICE(0x10B9),
- INTEL_E1000_ETHERNET_DEVICE(0x10BA),
- INTEL_E1000_ETHERNET_DEVICE(0x10BB),
- INTEL_E1000_ETHERNET_DEVICE(0x10BC),
- INTEL_E1000_ETHERNET_DEVICE(0x10C4),
- INTEL_E1000_ETHERNET_DEVICE(0x10C5),
- INTEL_E1000_ETHERNET_DEVICE(0x10D5),
- INTEL_E1000_ETHERNET_DEVICE(0x10D9),
- INTEL_E1000_ETHERNET_DEVICE(0x10DA),
/* required last entry */
{0,}
};
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 45f5ee2..3beace5 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -194,6 +194,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
break;
case E1000_DEV_ID_82571EB_SERDES:
case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES_DUAL:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
hw->media_type = e1000_media_type_internal_serdes;
break;
default:
@@ -260,6 +262,7 @@ static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter)
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
adapter->flags |= FLAG_IS_QUAD_PORT;
/* mark the first port */
if (global_quad_port_a == 0)
@@ -285,6 +288,9 @@ static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_IS_QUAD_PORT &&
(!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
adapter->flags &= ~FLAG_HAS_WOL;
+ /* Does not support WoL on any port */
+ if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
+ adapter->flags &= ~FLAG_HAS_WOL;
break;
case e1000_82573:
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 1bb2052..71f93ce 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -303,8 +303,11 @@ enum e1e_registers {
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
#define E1000_DEV_ID_82571EB_QUAD_COPPER_LP 0x10BC
+#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
+#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
#define E1000_DEV_ID_82572EI_COPPER 0x107D
#define E1000_DEV_ID_82572EI_FIBER 0x107E
#define E1000_DEV_ID_82572EI_SERDES 0x107F
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ec427e2..a271112 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4088,16 +4088,15 @@ static struct pci_error_handlers e1000_err_handler = {
};
static struct pci_device_id e1000_pci_tbl[] = {
- /*
- * Support for 82571/2/3, es2lan and ich8 will be phased in
- * stepwise.
-
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
@@ -4120,8 +4119,6 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
- */
-
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
next prev parent reply other threads:[~2007-10-31 22:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-31 22:21 [PATCH 1/4] e1000e: alternate MAC address support Auke Kok
2007-10-31 22:22 ` [PATCH 2/4] e1000e: Disable L1 ASPM power savings for 82573 mobile variants Auke Kok
2007-10-31 22:22 ` Auke Kok [this message]
2007-10-31 22:22 ` [PATCH 4/4] ixgbe: Fix copper PHY initialization code Auke Kok
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071031222205.17411.8456.stgit@localhost.localdomain \
--to=auke-jan.h.kok@intel.com \
--cc=jeff@garzik.org \
--cc=jesse.brandeburg@intel.com \
--cc=john.ronciak@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.