Re: X-Fi support in ALSA.

* Re: X-Fi support in ALSA.
@ 2008-03-10 23:49 Spike
  2008-03-11  0:09 ` William Pitcock
  0 siblings, 1 reply; 6+ messages in thread
From: Spike @ 2008-03-10 23:49 UTC (permalink / raw)
  To: James; +Cc: alsa-devel

> Hi,
>
> I have now had a chance to read some of the specs of the X-Fi cards. 
> aka. emu20k1.
> It turns out that some of the X-Fi cards have a compatibility mode.
> By default, they boot up in compatibility mode.
> The interesting point is that this "compatibility mode" is in fact
> the intel-HD standard so could use the intel-hda driver.
> For one X-Fi card with IDs:
> Device 1102:0009 Subsystem: 1102:0010
> works a bit with the ALSA hda-intel driver.
> So far, the off the shelf hda-intel driver, with simple PCIs
> adjustment, works for the above card, but only sound capture works so
> far, so probably some quirk would be needed.
> This compatibility mode works with the Windows Vista UAA drivers.
>
> Not all X-Fi cards support with compatibility mode. For example, any 
> card with (after a cold boot into Linux)
> Device 1102:0005 Subsystem: xxxx:xxxx
> will be X-Fi only.
>
> With regard to actual full X-Fi support, I am still in the progress of 
> creating a GPL emu20k1.h file, that is the first step towards an 
> snd-emu20k1 native ALSA driver.
>
> James

Hello,

That first ID is an X-Fi Xtreme Audio PCIe (CA0110-IBG) is it not? Not a
real EMU20K1 based X-Fi, fully software driven, and from what I read its
just a PCIe variation of the old CA0106. This thing will probably work
with snd-ca0106 if creative kept to their old tactics regarding their
low end X-Fi products.

As for supporting the real X-Fi's, this is great news, its been a very
longtime coming. One just has to question Creative's motives behind
finally releasing the datasheets out of the blue like that after more
than 2 years of trying to get them. Are these sheets under an NDA?
Full support of an X-Fi will probably also need a firmware loader.

If the PCIe CA0110-IBG doesn't share any common traits with a full
blown EMU20K1, then I think the real X-Fi's should be focused on first
as many more people are going to have these real X-Fi's that are
useless to them at the moment, (about 3 years remember).

I'll be around to help test code and can try anything you will require
to help out supporting a real X-Fi card.

02:08.0 Multimedia audio controller: Creative Labs SB X-Fi [1102:0005]
        Subsystem: Unknown device 415a:0034
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at a400 [size=32]
        Memory at efc00000 (64-bit, non-prefetchable) [size=2M]
        Memory at e8000000 (64-bit, non-prefetchable) [size=64M]

Bren

^ permalink raw reply	[flat|nested] 6+ messages in thread