From: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
To: Felipe Balbi
<felipebalbi-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Cc: Felipe Balbi <me-uiRdBs8odbtmTBlB0Cgj/Q@public.gmane.org>,
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [PATH 0/3] isp1301 changes
Date: Sat, 15 Mar 2008 19:57:49 -0800 [thread overview]
Message-ID: <200803152057.49712.david-b@pacbell.net> (raw)
In-Reply-To: <31e679430803150840p334e8d17ncdd1fdc431de8d82-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Saturday 15 March 2008, Felipe Balbi wrote:
> > high. Also, a driver shouldn't be conditional to an architecture. I
> > mean, isp1301 can be used with any arch, not only with omap. So as
> > much as we can make it platform independent as better driver we get.
Actually, *this* driver is specific to OMAP since it's got to
coordinate between an OMAP-specific OTG controller and the
more generic isp1301 chip. So that's not a concern here.
It would be nice of course to have a clean split between the
isp1301 code and the OTG controller ... but I'm not sure how
useful that would be. The ISP1301 may have effectively become
a CEA standard (yes?) for external full speed OTG transceivers,
but it's not like there have been a flood of Linux platforms
supporting it.
All the new platforms are going for high speed OTG, not full
speed ...
- Dave
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
prev parent reply other threads:[~2008-03-16 3:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-15 12:47 [PATH 0/3] isp1301 changes Felipe Balbi
[not found] ` <1205585237-21492-1-git-send-email-me-uiRdBs8odbtmTBlB0Cgj/Q@public.gmane.org>
2008-03-15 12:47 ` [PATCH] I2C: Introduce irq_flags in i2c_boardinfo and i2c_client Felipe Balbi
[not found] ` <1205585237-21492-2-git-send-email-me-uiRdBs8odbtmTBlB0Cgj/Q@public.gmane.org>
2008-03-15 12:47 ` [PATCH] I2C: ISP1301_OMAP: New-style i2c driver updates, part 1 Felipe Balbi
[not found] ` <1205585237-21492-3-git-send-email-me-uiRdBs8odbtmTBlB0Cgj/Q@public.gmane.org>
2008-03-15 12:47 ` [PATCH] I2C: ISP1301_OMAP: New-style i2c driver updates, part 2 Felipe Balbi
[not found] ` <1205585237-21492-4-git-send-email-me-uiRdBs8odbtmTBlB0Cgj/Q@public.gmane.org>
2008-03-15 12:49 ` Felipe Balbi
[not found] ` <20080315124918.GA21547-4vvIQG7NF+ITKvXZea5imILpUPVTGn5w@public.gmane.org>
2008-03-15 12:54 ` Felipe Balbi
[not found] ` <20080315125458.GB21547-4vvIQG7NF+ITKvXZea5imILpUPVTGn5w@public.gmane.org>
2008-03-15 13:13 ` Felipe Balbi
[not found] ` <20080315131309.GA24990-4vvIQG7NF+ITKvXZea5imILpUPVTGn5w@public.gmane.org>
2008-03-16 10:56 ` Felipe Balbi
[not found] ` <20080316105617.GA4503-4vvIQG7NF+ITKvXZea5imILpUPVTGn5w@public.gmane.org>
2008-03-16 11:00 ` [PATCH] I2C: ISP1301: Sync with linux-omap Felipe Balbi
[not found] ` <20080316110033.GB4503-4vvIQG7NF+ITKvXZea5imILpUPVTGn5w@public.gmane.org>
2008-03-16 17:59 ` David Brownell
[not found] ` <200803161059.52278.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-03-16 18:18 ` Felipe Balbi
2008-03-18 12:46 ` Jean Delvare
[not found] ` <20080318134633.16f6e5f1-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-18 13:09 ` Felipe Balbi
[not found] ` <31e679430803180609s2b404dabu1cac2e09f128ba96-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-18 13:23 ` Jean Delvare
[not found] ` <20080318142337.0f9a2b5b-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-18 13:28 ` Felipe Balbi
[not found] ` <31e679430803180628h7a4926a2t4e540d9617522e28-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-20 9:39 ` David Brownell
2008-03-16 17:55 ` [PATCH] I2C: ISP1301_OMAP: New-style i2c driver updates, part 2 David Brownell
2008-03-18 12:42 ` Jean Delvare
[not found] ` <20080318134259.1b7e2878-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-18 13:06 ` Felipe Balbi
[not found] ` <31e679430803180606w51e5538ar1df7fbdfa5a0e894-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-18 13:27 ` Jean Delvare
[not found] ` <20080318142716.74d65ba1-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-20 9:44 ` David Brownell
2008-03-18 13:15 ` Jean Delvare
[not found] ` <20080318141528.53f4b2d8-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-18 13:25 ` Felipe Balbi
2008-03-20 9:56 ` David Brownell
2008-03-31 17:37 ` Ben Dooks
[not found] ` <20080331173749.GA10234-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-03-31 18:41 ` Jean Delvare
2008-03-15 15:28 ` [PATH 0/3] isp1301 changes Jean Delvare
[not found] ` <20080315162832.067b8088-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-15 15:38 ` Felipe Balbi
[not found] ` <31e679430803150838n6638be05k53800bb74eeb3462-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-15 15:40 ` Felipe Balbi
[not found] ` <31e679430803150840p334e8d17ncdd1fdc431de8d82-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-15 16:47 ` Jean Delvare
[not found] ` <20080315174731.29cfb554-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-15 23:22 ` Felipe Balbi
2008-03-16 3:57 ` David Brownell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803152057.49712.david-b@pacbell.net \
--to=david-b-ybekhbn/0ldr7s880joybq@public.gmane.org \
--cc=felipebalbi-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=me-uiRdBs8odbtmTBlB0Cgj/Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.