All of lore.kernel.org
 help / color / mirror / Atom feed
From: Balbir Singh <balbir@linux.vnet.ibm.com>
To: linux-mm@kvack.org
Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com>,
	YAMAMOTO Takashi <yamamoto@valinux.co.jp>,
	Paul Menage <menage@google.com>,
	lizf@cn.fujitsu.com, linux-kernel@vger.kernel.org,
	David Rientjes <rientjes@google.com>,
	Pavel Emelianov <xemul@openvz.org>,
	Balbir Singh <balbir@linux.vnet.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Subject: [-mm][PATCH 4/4] Add rlimit controller documentation
Date: Sun, 04 May 2008 03:08:25 +0530	[thread overview]
Message-ID: <20080503213825.3140.4328.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080503213726.3140.68845.sendpatchset@localhost.localdomain>



This is the documentation patch. It describes the rlimit controller and how
to build and use it.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
---

 Documentation/controllers/rlimit.txt |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff -puN /dev/null Documentation/controllers/rlimit.txt
--- /dev/null	2008-05-03 22:12:13.033285313 +0530
+++ linux-2.6.25-balbir/Documentation/controllers/rlimit.txt	2008-05-04 03:06:06.000000000 +0530
@@ -0,0 +1,29 @@
+This controller is enabled by the CONFIG_CGROUP_RLIMIT_CTLR option. Prior
+to reading this documentation please read Documentation/cgroups.txt and
+Documentation/controllers/memory.txt. Several of the principles of this
+controller are similar to the memory resource controller.
+
+This controller framework is designed to be extensible to control any
+resource limit (memory related) with little effort.
+
+This new controller, controls the address space expansion of the tasks
+belonging to a cgroup. Address space control is provided along the same lines as
+RLIMIT_AS control, which is available via getrlimit(2)/setrlimit(2).
+The interface for controlling address space is provided through
+"rlimit.limit_in_bytes". The file is similar to "limit_in_bytes" w.r.t. the user
+interface. Please see section 3 of the memory resource controller documentation
+for more details on how to use the user interface to get and set values.
+
+The "rlimit.usage_in_bytes" file provides information about the total address
+space usage of the tasks in the cgroup, in bytes.
+
+Advantages of providing this feature
+
+1. Control over virtual address space allows for a cgroup to fail gracefully
+   i.e., via a malloc or mmap failure as compared to OOM kill when no
+   pages can be reclaimed.
+2. It provides better control over how many pages can be swapped out when
+   the cgroup goes over its limit. A badly setup cgroup can cause excessive
+   swapping. Providing control over the address space allocations ensures
+   that the system administrator has control over the total swapping that
+   can take place.
_

-- 
	Warm Regards,
	Balbir Singh
	Linux Technology Center
	IBM, ISTL

WARNING: multiple messages have this Message-ID (diff)
From: Balbir Singh <balbir@linux.vnet.ibm.com>
To: linux-mm@kvack.org
Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com>,
	YAMAMOTO Takashi <yamamoto@valinux.co.jp>,
	Paul Menage <menage@google.com>,
	lizf@cn.fujitsu.com, linux-kernel@vger.kernel.org,
	David Rientjes <rientjes@google.com>,
	Pavel Emelianov <xemul@openvz.org>,
	Balbir Singh <balbir@linux.vnet.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Subject: [-mm][PATCH 4/4] Add rlimit controller documentation
Date: Sun, 04 May 2008 03:08:25 +0530	[thread overview]
Message-ID: <20080503213825.3140.4328.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080503213726.3140.68845.sendpatchset@localhost.localdomain>


This is the documentation patch. It describes the rlimit controller and how
to build and use it.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
---

 Documentation/controllers/rlimit.txt |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff -puN /dev/null Documentation/controllers/rlimit.txt
--- /dev/null	2008-05-03 22:12:13.033285313 +0530
+++ linux-2.6.25-balbir/Documentation/controllers/rlimit.txt	2008-05-04 03:06:06.000000000 +0530
@@ -0,0 +1,29 @@
+This controller is enabled by the CONFIG_CGROUP_RLIMIT_CTLR option. Prior
+to reading this documentation please read Documentation/cgroups.txt and
+Documentation/controllers/memory.txt. Several of the principles of this
+controller are similar to the memory resource controller.
+
+This controller framework is designed to be extensible to control any
+resource limit (memory related) with little effort.
+
+This new controller, controls the address space expansion of the tasks
+belonging to a cgroup. Address space control is provided along the same lines as
+RLIMIT_AS control, which is available via getrlimit(2)/setrlimit(2).
+The interface for controlling address space is provided through
+"rlimit.limit_in_bytes". The file is similar to "limit_in_bytes" w.r.t. the user
+interface. Please see section 3 of the memory resource controller documentation
+for more details on how to use the user interface to get and set values.
+
+The "rlimit.usage_in_bytes" file provides information about the total address
+space usage of the tasks in the cgroup, in bytes.
+
+Advantages of providing this feature
+
+1. Control over virtual address space allows for a cgroup to fail gracefully
+   i.e., via a malloc or mmap failure as compared to OOM kill when no
+   pages can be reclaimed.
+2. It provides better control over how many pages can be swapped out when
+   the cgroup goes over its limit. A badly setup cgroup can cause excessive
+   swapping. Providing control over the address space allocations ensures
+   that the system administrator has control over the total swapping that
+   can take place.
_

-- 
	Warm Regards,
	Balbir Singh
	Linux Technology Center
	IBM, ISTL

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2008-05-03 21:40 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-03 21:37 [-mm][PATCH 0/4] Add rlimit controller to cgroups (v3) Balbir Singh
2008-05-03 21:37 ` Balbir Singh
2008-05-03 21:37 ` [-mm][PATCH 1/4] Setup the rlimit controller Balbir Singh
2008-05-03 21:37   ` Balbir Singh
2008-05-05 22:11   ` Andrew Morton
2008-05-05 22:11     ` Andrew Morton
2008-05-06  3:40     ` Balbir Singh
2008-05-06  3:40       ` Balbir Singh
2008-05-06  1:31   ` Li Zefan
2008-05-06  1:31     ` Li Zefan
2008-05-06  8:15     ` Balbir Singh
2008-05-06  8:15       ` Balbir Singh
2008-05-03 21:38 ` [-mm][PATCH 2/4] Enhance cgroup mm_owner_changed callback to add task information Balbir Singh
2008-05-03 21:38   ` Balbir Singh
2008-05-05 22:15   ` Andrew Morton
2008-05-05 22:15     ` Andrew Morton
2008-05-06  3:43     ` Balbir Singh
2008-05-06  3:43       ` Balbir Singh
2008-05-05 23:00   ` Paul Menage
2008-05-05 23:00     ` Paul Menage
2008-05-03 21:38 ` [-mm][PATCH 3/4] Add rlimit controller accounting and control Balbir Singh
2008-05-03 21:38   ` Balbir Singh
2008-05-05 22:24   ` Andrew Morton
2008-05-05 22:24     ` Andrew Morton
2008-05-05 22:32     ` David Rientjes
2008-05-05 22:32       ` David Rientjes
2008-05-06  5:34     ` Balbir Singh
2008-05-06  5:34       ` Balbir Singh
2008-05-07  3:17   ` Paul Menage
2008-05-07  3:17     ` Paul Menage
2008-05-07  5:59     ` Pavel Emelyanov
2008-05-07  5:59       ` Pavel Emelyanov
2008-05-08 14:54     ` Balbir Singh
2008-05-08 14:54       ` Balbir Singh
2008-05-08 23:22       ` Paul Menage
2008-05-08 23:22         ` Paul Menage
2008-05-07  3:29   ` Paul Menage
2008-05-07  3:29     ` Paul Menage
2008-05-08 14:35     ` Balbir Singh
2008-05-08 14:35       ` Balbir Singh
2008-05-08 21:45       ` Paul Menage
2008-05-08 21:45         ` Paul Menage
2008-05-09 13:35         ` Balbir Singh
2008-05-09 13:35           ` Balbir Singh
2008-05-03 21:38 ` Balbir Singh [this message]
2008-05-03 21:38   ` [-mm][PATCH 4/4] Add rlimit controller documentation Balbir Singh
2008-05-05 22:35   ` Andrew Morton
2008-05-05 22:35     ` Andrew Morton
2008-05-06  5:39     ` Balbir Singh
2008-05-06  5:39       ` Balbir Singh
2008-05-06  5:54       ` Andrew Morton
2008-05-06  5:54         ` Andrew Morton
2008-05-06  7:59         ` Balbir Singh
2008-05-06  7:59           ` Balbir Singh
2008-05-04 15:24 ` [-mm][PATCH 0/4] Add rlimit controller to cgroups (v3) kamezawa.hiroyu
2008-05-04 15:24   ` kamezawa.hiroyu
2008-05-04 15:27   ` kamezawa.hiroyu
2008-05-04 15:27     ` kamezawa.hiroyu
2008-05-05  4:24     ` Balbir Singh
2008-05-05  4:24       ` Balbir Singh
2008-05-05  4:21   ` Balbir Singh
2008-05-05  4:21     ` Balbir Singh
2008-05-07  1:09     ` KAMEZAWA Hiroyuki
2008-05-07  1:09       ` KAMEZAWA Hiroyuki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080503213825.3140.4328.sendpatchset@localhost.localdomain \
    --to=balbir@linux.vnet.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lizf@cn.fujitsu.com \
    --cc=menage@google.com \
    --cc=rientjes@google.com \
    --cc=skumar@linux.vnet.ibm.com \
    --cc=xemul@openvz.org \
    --cc=yamamoto@valinux.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.