All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux@fluff.org>
To: Tony Lindgren <tony@atomide.com>
Cc: i2c@lm-sensors.org, Paul Walmsley <paul@pwsan.com>,
	linux-omap@vger.kernel.org
Subject: Re: [i2c] [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
Date: Mon, 29 Sep 2008 23:29:42 +0100	[thread overview]
Message-ID: <20080929222942.GT2716@fluff.org.uk> (raw)
In-Reply-To: <1222329234-31473-8-git-send-email-tony@atomide.com>

On Thu, Sep 25, 2008 at 10:53:53AM +0300, Tony Lindgren wrote:
> From: Paul Walmsley <paul@pwsan.com>
> 
> Skip compiling OMAP15xx I2C ISR for non-OMAP15xx builds.  Saves 400 bytes
> of text for most OMAP builds.

you've sneaked in __devinit/__devexit changes into this patch,
I'm going to put my foot down on that.
 
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  drivers/i2c/busses/i2c-omap.c |   10 ++++++++--
>  1 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index e71f1f2..5c54864 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -511,6 +511,9 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
>  	omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
>  }
>  
> +/* rev1 devices are apparently only on some 15xx */
> +#ifdef CONFIG_ARCH_OMAP15XX
> +
>  static irqreturn_t
>  omap_i2c_rev1_isr(int this_irq, void *dev_id)
>  {
> @@ -565,6 +568,9 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
>  
>  	return IRQ_HANDLED;
>  }
> +#else
> +#define omap_i2c_rev1_isr		0
> +#endif
>  
>  static irqreturn_t
>  omap_i2c_isr(int this_irq, void *dev_id)
> @@ -843,14 +849,14 @@ static struct platform_driver omap_i2c_driver = {
>  };
>  
>  /* I2C may be needed to bring up other drivers */
> -static int __init
> +static int __devinit
>  omap_i2c_init_driver(void)
>  {
>  	return platform_driver_register(&omap_i2c_driver);
>  }
>  subsys_initcall(omap_i2c_init_driver);
>  
> -static void __exit omap_i2c_exit_driver(void)
> +static void __devexit omap_i2c_exit_driver(void)

a differerent change to the one advertised.

>  {
>  	platform_driver_unregister(&omap_i2c_driver);
>  }
> -- 
> 1.5.6.rc3.21.g8c6b5
> 
> 
> _______________________________________________
> i2c mailing list
> i2c@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/i2c

-- 
Ben (ben@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'

  parent reply	other threads:[~2008-09-29 22:29 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-25  7:53 [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Tony Lindgren
2008-09-25  7:53 ` [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Tony Lindgren
2008-09-25  7:53   ` [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Tony Lindgren
2008-09-25  7:53     ` [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Tony Lindgren
2008-09-25  7:53       ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Tony Lindgren
2008-09-25  7:53         ` [PATCH 5/8] i2c-omap: Add support on 34xx Tony Lindgren
2008-09-25  7:53           ` [PATCH 6/8] i2c-omap: Mark init-only functions as __init Tony Lindgren
2008-09-25  7:53             ` [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Tony Lindgren
2008-09-25  7:53               ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap Tony Lindgren
2008-09-25 11:40                 ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap, v3 Tony Lindgren
2008-09-29 22:31                 ` [i2c] [PATCH 8/8] i2c-omap: Clean-up i2c-omap Ben Dooks
2008-10-17 15:41                   ` Tony Lindgren
     [not found]                 ` <1222329234-31473-9-git-send-email-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2008-10-17 15:47                   ` [PATCH 9/8] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un, }idle() Tony Lindgren
2008-09-29 22:29               ` Ben Dooks [this message]
2008-09-29 23:06                 ` [i2c] [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds David Brownell
2008-09-30  5:35                   ` Paul Walmsley
2008-09-30  5:36                     ` Paul Walmsley
2008-10-17 15:40                       ` Tony Lindgren
2008-09-29 22:30             ` [i2c] [PATCH 6/8] i2c-omap: Mark init-only functions as __init Ben Dooks
2008-10-17 15:39               ` Tony Lindgren
2008-10-17 17:07                 ` Tony Lindgren
2008-09-29 22:28           ` [i2c] [PATCH 5/8] i2c-omap: Add support on 34xx Ben Dooks
2008-10-17 15:38             ` Tony Lindgren
2008-09-25 11:39         ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap, v3 Tony Lindgren
2008-09-29 22:27         ` [i2c] [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Ben Dooks
2008-09-29 22:25       ` [i2c] [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Ben Dooks
2008-10-17 15:37         ` Tony Lindgren
2008-09-29 22:21     ` [i2c] [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Ben Dooks
2008-09-29 22:21   ` [i2c] [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Ben Dooks
2008-09-30 11:51     ` Jarkko Nikula
2008-10-17 15:35       ` Tony Lindgren
2008-09-29 22:23 ` [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Ben Dooks
2008-09-30  5:35   ` Tony Lindgren
2008-10-17 16:04     ` git-pull request for i2c-omap changes (Re: [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2) Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080929222942.GT2716@fluff.org.uk \
    --to=ben-linux@fluff.org \
    --cc=i2c@lm-sensors.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.