All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Paul Walmsley <paul@booyaka.com>
Cc: David Brownell <david-b@pacbell.net>,
	Ben Dooks <ben-linux@fluff.org>,
	i2c@lm-sensors.org, linux-omap@vger.kernel.org
Subject: Re: [i2c] [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
Date: Fri, 17 Oct 2008 08:40:30 -0700	[thread overview]
Message-ID: <20081017154029.GM15820@atomide.com> (raw)
In-Reply-To: <alpine.DEB.2.00.0809292336130.27332@utopia.booyaka.com>

[-- Attachment #1: Type: text/plain, Size: 677 bytes --]

* Paul Walmsley <paul@booyaka.com> [080929 22:36]:
> On Mon, 29 Sep 2008, Paul Walmsley wrote:
> 
> > Hello Ben, David,
> > 
> > On Mon, 29 Sep 2008, David Brownell wrote:
> > 
> > > On Monday 29 September 2008, Ben Dooks wrote:
> > > > > -static void __exit omap_i2c_exit_driver(void)
> > > > > +static void __devexit omap_i2c_exit_driver(void)
> > > > 
> > > > a differerent change to the one advertised.
> > > > 
> > > > >  {
> > > > >       platform_driver_unregister(&omap_i2c_driver);
> > > > >  }
> > > 
> > > And incorrect too.
> > 
> > Indeed, will split and resubmit.
> 
> (and change to __init/__exit)

Here's this one with the __init/__exit changes removed.

Tony


[-- Attachment #2: 0007-i2c-omap-Don-t-compile-in-OMAP15xx-I2C-ISR-for-non.patch --]
[-- Type: text/x-diff, Size: 1221 bytes --]

>From 6e8249e9d1aa28bda2c0123542582104635a0a83 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 17 Oct 2008 07:46:56 -0700
Subject: [PATCH] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds

Skip compiling OMAP15xx I2C ISR for non-OMAP15xx builds.  Saves 400 bytes
of text for most OMAP builds.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/i2c/busses/i2c-omap.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 018d284..5560064 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -506,6 +506,9 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 	omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 }
 
+/* rev1 devices are apparently only on some 15xx */
+#ifdef CONFIG_ARCH_OMAP15XX
+
 static irqreturn_t
 omap_i2c_rev1_isr(int this_irq, void *dev_id)
 {
@@ -560,6 +563,9 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
 
 	return IRQ_HANDLED;
 }
+#else
+#define omap_i2c_rev1_isr		0
+#endif
 
 static irqreturn_t
 omap_i2c_isr(int this_irq, void *dev_id)
-- 
1.5.6.rc3.21.g8c6b5


  reply	other threads:[~2008-10-17 15:40 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-25  7:53 [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Tony Lindgren
2008-09-25  7:53 ` [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Tony Lindgren
2008-09-25  7:53   ` [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Tony Lindgren
2008-09-25  7:53     ` [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Tony Lindgren
2008-09-25  7:53       ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Tony Lindgren
2008-09-25  7:53         ` [PATCH 5/8] i2c-omap: Add support on 34xx Tony Lindgren
2008-09-25  7:53           ` [PATCH 6/8] i2c-omap: Mark init-only functions as __init Tony Lindgren
2008-09-25  7:53             ` [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Tony Lindgren
2008-09-25  7:53               ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap Tony Lindgren
2008-09-25 11:40                 ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap, v3 Tony Lindgren
2008-09-29 22:31                 ` [i2c] [PATCH 8/8] i2c-omap: Clean-up i2c-omap Ben Dooks
2008-10-17 15:41                   ` Tony Lindgren
     [not found]                 ` <1222329234-31473-9-git-send-email-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2008-10-17 15:47                   ` [PATCH 9/8] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un, }idle() Tony Lindgren
2008-09-29 22:29               ` [i2c] [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Ben Dooks
2008-09-29 23:06                 ` David Brownell
2008-09-30  5:35                   ` Paul Walmsley
2008-09-30  5:36                     ` Paul Walmsley
2008-10-17 15:40                       ` Tony Lindgren [this message]
2008-09-29 22:30             ` [i2c] [PATCH 6/8] i2c-omap: Mark init-only functions as __init Ben Dooks
2008-10-17 15:39               ` Tony Lindgren
2008-10-17 17:07                 ` Tony Lindgren
2008-09-29 22:28           ` [i2c] [PATCH 5/8] i2c-omap: Add support on 34xx Ben Dooks
2008-10-17 15:38             ` Tony Lindgren
2008-09-25 11:39         ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap, v3 Tony Lindgren
2008-09-29 22:27         ` [i2c] [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Ben Dooks
2008-09-29 22:25       ` [i2c] [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Ben Dooks
2008-10-17 15:37         ` Tony Lindgren
2008-09-29 22:21     ` [i2c] [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Ben Dooks
2008-09-29 22:21   ` [i2c] [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Ben Dooks
2008-09-30 11:51     ` Jarkko Nikula
2008-10-17 15:35       ` Tony Lindgren
2008-09-29 22:23 ` [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Ben Dooks
2008-09-30  5:35   ` Tony Lindgren
2008-10-17 16:04     ` git-pull request for i2c-omap changes (Re: [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2) Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081017154029.GM15820@atomide.com \
    --to=tony@atomide.com \
    --cc=ben-linux@fluff.org \
    --cc=david-b@pacbell.net \
    --cc=i2c@lm-sensors.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@booyaka.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.