* [PATCH 00/12] Various hwmon patches @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Hi all, Here are a myriad of hwmon patches that I've been working on for (roughly) 2.6.28. Please have a look and let me know what you think. - Further elaboration of the hwmon sysfs interface for power meters - New drivers: adt7462 (v2) and ics932s401 - adt7462 v2: Fix some mislabelling problems and make it autoload via DMI - DMI based autoloading of various hwmon drivers for various IBM systems - Automatic loading for i5k-amb driver - Fix adt7470 mislabelling problems - Update adt7473 documentation - adt7470/adt7473: Check input values from sysfs --D ^ permalink raw reply [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 00/12] Various hwmon patches @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Hi all, Here are a myriad of hwmon patches that I've been working on for (roughly) 2.6.28. Please have a look and let me know what you think. - Further elaboration of the hwmon sysfs interface for power meters - New drivers: adt7462 (v2) and ics932s401 - adt7462 v2: Fix some mislabelling problems and make it autoload via DMI - DMI based autoloading of various hwmon drivers for various IBM systems - Automatic loading for i5k-amb driver - Fix adt7470 mislabelling problems - Update adt7473 documentation - adt7470/adt7473: Check input values from sysfs --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 01/12] hwmon: Define sysfs interface for energy consumption register. 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:18 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Describe the sysfs files that were introduced in the ibmaem driver. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/sysfs-interface | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2d84573..6d47cb2 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -321,6 +321,14 @@ curr[1-*]_input Current input value Unit: milliampere RO +********** +* Energy * +********** + +energy[1-*]_input Cumulative energy use + Unit: microJoule + RO + ********* * Power * ********* @@ -329,6 +337,10 @@ power[1-*]_average Average power use Unit: microWatt RO +power[1-*]_average_interval Power use averaging interval + Unit: milliseconds + RW + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 01/12] hwmon: Define sysfs interface for energy @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Describe the sysfs files that were introduced in the ibmaem driver. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/sysfs-interface | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2d84573..6d47cb2 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -321,6 +321,14 @@ curr[1-*]_input Current input value Unit: milliampere RO +********** +* Energy * +********** + +energy[1-*]_input Cumulative energy use + Unit: microJoule + RO + ********* * Power * ********* @@ -329,6 +337,10 @@ power[1-*]_average Average power use Unit: microWatt RO +power[1-*]_average_interval Power use averaging interval + Unit: milliseconds + RW + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 01/12] hwmon: Define sysfs interface for energy consumption register. 2008-10-07 1:18 ` [lm-sensors] [PATCH 01/12] hwmon: Define sysfs interface for energy Darrick J. Wong @ 2008-10-08 8:09 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 8:09 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:29 -0700, Darrick J. Wong wrote: > > Describe the sysfs files that were introduced in the ibmaem driver. > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/sysfs-interface | 12 ++++++++++++ > 1 files changed, 12 insertions(+), 0 deletions(-) > > diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface > index 2d84573..6d47cb2 100644 > --- a/Documentation/hwmon/sysfs-interface > +++ b/Documentation/hwmon/sysfs-interface > @@ -321,6 +321,14 @@ curr[1-*]_input Current input value > Unit: milliampere > RO > > +********** > +* Energy * > +********** > + > +energy[1-*]_input Cumulative energy use > + Unit: microJoule > + RO > + > ********* > * Power * > ********* > @@ -329,6 +337,10 @@ power[1-*]_average Average power use > Unit: microWatt > RO > > +power[1-*]_average_interval Power use averaging interval > + Unit: milliseconds > + RW > + > power[1-*]_average_highest Historical average maximum power use > Unit: microWatt > RO > > I'm taking this in my tree, thanks (with a minor change: moving Energy after Power for consistency.) -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 01/12] hwmon: Define sysfs interface for @ 2008-10-08 8:09 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 8:09 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:29 -0700, Darrick J. Wong wrote: > > Describe the sysfs files that were introduced in the ibmaem driver. > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/sysfs-interface | 12 ++++++++++++ > 1 files changed, 12 insertions(+), 0 deletions(-) > > diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface > index 2d84573..6d47cb2 100644 > --- a/Documentation/hwmon/sysfs-interface > +++ b/Documentation/hwmon/sysfs-interface > @@ -321,6 +321,14 @@ curr[1-*]_input Current input value > Unit: milliampere > RO > > +********** > +* Energy * > +********** > + > +energy[1-*]_input Cumulative energy use > + Unit: microJoule > + RO > + > ********* > * Power * > ********* > @@ -329,6 +337,10 @@ power[1-*]_average Average power use > Unit: microWatt > RO > > +power[1-*]_average_interval Power use averaging interval > + Unit: milliseconds > + RW > + > power[1-*]_average_highest Historical average maximum power use > Unit: microWatt > RO > > I'm taking this in my tree, thanks (with a minor change: moving Energy after Power for consistency.) -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 02/12] adt7462: New hwmon driver 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:18 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors New driver to feed on. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. v2: Fix a problem where pwm*_auto_point*_temp should have been temp*_auto_point*_temp. Also enable DMI autoprobing at least for me. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/adt7462 | 67 + drivers/hwmon/Kconfig | 10 drivers/hwmon/Makefile | 1 drivers/hwmon/adt7462.c | 2009 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2087 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462 new file mode 100644 index 0000000..ec660b3 --- /dev/null +++ b/Documentation/hwmon/adt7462 @@ -0,0 +1,67 @@ +Kernel driver adt7462 +====================== + +Supported chips: + * Analog Devices ADT7462 + Prefix: 'adt7462' + Addresses scanned: I2C 0x58, 0x5C + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7462 chip family. + +This chip is a bit of a beast. It has 8 counters for measuring fan speed. It +can also measure 13 voltages or 4 temperatures, or various combinations of the +two. See the chip documentation for more details about the exact set of +configurations. This driver does not allow one to configure the chip; that is +left to the system designer. + +A sophisticated control system for the PWM outputs is designed into the ADT7462 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7462 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT7462 will signal an ALARM if +any measured value exceeds either limit. + +The ADT7462 samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7462 have a 10-bit ADC and can therefore measure temperatures +with 0.25 degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +The driver will report sensor labels when it is able to determine that +information from the configuration registers. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7462 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds temp#_max. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index d402e8d..0341b29 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -159,6 +159,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 950134a..836b277 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c new file mode 100644 index 0000000..fe642ab --- /dev/null +++ b/drivers/hwmon/adt7462.c @@ -0,0 +1,2009 @@ +/* + * A hwmon driver for the Analog Devices ADT7462 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7462); + +/* ADT7462 registers */ +#define ADT7462_REG_DEVICE 0x3D +#define ADT7462_REG_VENDOR 0x3E +#define ADT7462_REG_REVISION 0x3F + +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44 +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47 +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48 +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B +#define ADT7462_REG_TEMP_BASE_ADDR 0x88 +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F + +#define ADT7462_REG_FAN_BASE_ADDR 0x98 +#define ADT7462_REG_FAN_MAX_ADDR 0x9F +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2 +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9 +#define ADT7462_REG_FAN_ENABLE 0x07 +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78 +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F + +#define ADT7462_REG_CFG2 0x02 +#define ADT7462_FSPD_MASK 0x20 + +#define ADT7462_REG_PWM_BASE_ADDR 0xAA +#define ADT7462_REG_PWM_MAX_ADDR 0xAD +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28 +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B +#define ADT7462_REG_PWM_MAX 0x2C +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60 +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63 +#define ADT7462_PWM_HYST_MASK 0x0F +#define ADT7462_PWM_RANGE_MASK 0xF0 +#define ADT7462_PWM_RANGE_SHIFT 4 +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21 +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24 +#define ADT7462_PWM_CHANNEL_MASK 0xE0 +#define ADT7462_PWM_CHANNEL_SHIFT 5 + +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10 +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13 +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */ +#define ADT7462_DIODE3_INPUT 0x20 +#define ADT7462_DIODE1_INPUT 0x40 +#define ADT7462_VID_INPUT 0x80 +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */ +#define ADT7462_PIN21_INPUT 0x08 +#define ADT7462_PIN19_INPUT 0x10 +#define ADT7462_PIN15_INPUT 0x20 +#define ADT7462_PIN13_INPUT 0x40 +#define ADT7462_PIN8_INPUT 0x80 +#define ADT7462_PIN23_MASK 0x03 +#define ADT7462_PIN23_SHIFT 0 +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */ +#define ADT7462_PIN26_SHIFT 2 +#define ADT7462_PIN25_MASK 0x30 +#define ADT7462_PIN25_SHIFT 4 +#define ADT7462_PIN24_MASK 0xC0 +#define ADT7462_PIN24_SHIFT 6 +#define ADT7462_PIN26_VOLT_INPUT 0x08 +#define ADT7462_PIN25_VOLT_INPUT 0x20 +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_VOLT 0x5 + +#define ADT7462_REG_ALARM1 0xB8 +#define ADT7462_LT_ALARM 0x02 +#define ADT7462_R1T_ALARM 0x04 +#define ADT7462_R2T_ALARM 0x08 +#define ADT7462_R3T_ALARM 0x10 +#define ADT7462_REG_ALARM2 0xBB +#define ADT7462_V0_ALARM 0x01 +#define ADT7462_V1_ALARM 0x02 +#define ADT7462_V2_ALARM 0x04 +#define ADT7462_V3_ALARM 0x08 +#define ADT7462_V4_ALARM 0x10 +#define ADT7462_V5_ALARM 0x20 +#define ADT7462_V6_ALARM 0x40 +#define ADT7462_V7_ALARM 0x80 +#define ADT7462_REG_ALARM3 0xBC +#define ADT7462_V8_ALARM 0x08 +#define ADT7462_V9_ALARM 0x10 +#define ADT7462_V10_ALARM 0x20 +#define ADT7462_V11_ALARM 0x40 +#define ADT7462_V12_ALARM 0x80 +#define ADT7462_REG_ALARM4 0xBD +#define ADT7462_F0_ALARM 0x01 +#define ADT7462_F1_ALARM 0x02 +#define ADT7462_F2_ALARM 0x04 +#define ADT7462_F3_ALARM 0x08 +#define ADT7462_F4_ALARM 0x10 +#define ADT7462_F5_ALARM 0x20 +#define ADT7462_F6_ALARM 0x40 +#define ADT7462_F7_ALARM 0x80 +#define ADT7462_ALARM1 0x0000 +#define ADT7462_ALARM2 0x0100 +#define ADT7462_ALARM3 0x0200 +#define ADT7462_ALARM4 0x0300 +#define ADT7462_ALARM_REG_SHIFT 8 +#define ADT7462_ALARM_FLAG_MASK 0x0F + +#define ADT7462_TEMP_COUNT 4 +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2)) +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x)) +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x)) +#define TEMP_FRAC_OFFSET 6 + +#define ADT7462_FAN_COUNT 8 +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x)) + +#define ADT7462_PWM_COUNT 4 +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TMIN(x) \ + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TRANGE(x) \ + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x)) + +#define ADT7462_PIN_CFG_REG_COUNT 4 +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x)) + +#define ADT7462_ALARM_REG_COUNT 4 + +/* + * The chip can measure 13 different voltage sources: + * + * 1. +12V1 (pin 7) + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23) + * 3. +12V3 (pin 22) + * 4. +5V (pin 21) + * 5. +1.25V/+0.9V (pin 19) + * 6. +2.5V/+1.8V (pin 15) + * 7. +3.3v (pin 13) + * 8. +12V2 (pin 8) + * 9. Vbatt/FSB_Vtt (pin 26) + * A. +3.3V/+1.2V1 (pin 25) + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24) + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V) + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V) + * + * Each of these 13 has a factor to convert raw to voltage. Even better, + * the pins can be connected to other sensors (tach/gpio/hot/etc), which + * makes the bookkeeping tricky. + * + * Some, but not all, of these voltages have low/high limits. + */ +#define ADT7462_VOLT_COUNT 12 + +#define ADT7462_VENDOR 0x41 +#define ADT7462_DEVICE 0x62 +/* datasheet only mentions a revision 4 */ +#define ADT7462_REVISION 0x04 + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +#define MASK_AND_SHIFT(value, prefix) \ + (((value) & prefix##_MASK) >> prefix##_SHIFT) + +struct adt7462_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 temp[ADT7462_TEMP_COUNT]; + /* bits 6-7 are quarter pieces of temp */ + u8 temp_frac[ADT7462_TEMP_COUNT]; + u8 temp_min[ADT7462_TEMP_COUNT]; + u8 temp_max[ADT7462_TEMP_COUNT]; + u16 fan[ADT7462_FAN_COUNT]; + u8 fan_enabled; + u8 fan_min[ADT7462_FAN_COUNT]; + u8 cfg2; + u8 pwm[ADT7462_PWM_COUNT]; + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT]; + u8 voltages[ADT7462_VOLT_COUNT]; + u8 volt_max[ADT7462_VOLT_COUNT]; + u8 volt_min[ADT7462_VOLT_COUNT]; + u8 pwm_min[ADT7462_PWM_COUNT]; + u8 pwm_tmin[ADT7462_PWM_COUNT]; + u8 pwm_trange[ADT7462_PWM_COUNT]; + u8 pwm_max; /* only one per chip */ + u8 pwm_cfg[ADT7462_PWM_COUNT]; + u8 alarms[ADT7462_ALARM_REG_COUNT]; +}; + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7462_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7462_id[] = { + { "adt7462", adt7462 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7462_id); + +static struct i2c_driver adt7462_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7462", + }, + .probe = adt7462_probe, + .remove = adt7462_remove, + .id_table = adt7462_id, + .detect = adt7462_detect, + .address_data = &addr_data, +}; + +/* + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +static inline int range_check(long val, long min, long max) +{ + return val >= min && val <= max; +} + +/* For some reason these registers are not contiguous. */ +static int ADT7462_REG_FAN(int fan) +{ + if (fan < 4) + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan); + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4)); +} + +/* Voltage registers are scattered everywhere */ +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x7C; + break; + case 1: + return 0x69; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x7F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x7E; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x4B; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x49; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x68; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x7D; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x6C; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x6B; + break; + case 10: + return 0x6A; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x50; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x4C; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x6D; + break; + case 1: + return 0x72; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x6F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x71; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x47; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x45; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x70; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x6E; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x75; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x74; + break; + case 10: + return 0x73; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x76; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x77; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0xA3; + break; + case 1: + return 0x90; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0xA9; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0xA7; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x8F; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x8B; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x96; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0xA5; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x93; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x92; + break; + case 10: + return 0x91; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x94; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x95; + break; + } + return -ENODEV; +} + +/* Provide labels for sysfs */ +static const char *voltage_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return "+12V1"; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + return "Vccp1"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5V"; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return "+12V3"; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return "+5V"; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+0.9V"; + return "+1.25V"; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+1.8V"; + return "+2.5V"; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return "+3.3V"; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return "+12V2"; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return "Vbatt"; + case 1: + return "FSB_Vtt"; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return "+3.3V"; + case 1: + return "+1.2V1"; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return "Vccp2"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5"; + } + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V ICH"; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V 3GPIO"; + break; + } + return "N/A"; +} + +/* Multipliers are actually in uV, not mV. */ +static int voltage_multiplier(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 62500; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + if (data->pin_cfg[0] & ADT7462_VID_INPUT) + return 12500; + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 62500; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 26000; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return 4690; + return 6500; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT) + return 9400; + return 13000; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 17200; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 62500; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return 15600; + case 1: + return 6250; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return 17200; + case 1: + return 6250; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 11: + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 7800; + } + return 0; +} + +static int temp_enabled(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + case 2: + return 1; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return 1; + break; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return 1; + break; + } + return 0; +} + +static const char *temp_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + return "local"; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return "remote1"; + break; + case 2: + return "remote2"; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return "remote3"; + break; + } + return "N/A"; +} + +/* Map Trange register values to mC */ +#define NUM_TRANGE_VALUES 16 +static const int trange_values[NUM_TRANGE_VALUES] = { + 2000, + 2500, + 3300, + 4000, + 5000, + 6700, + 8000, + 10000, + 13300, + 16000, + 20000, + 26700, + 32000, + 40000, + 53300, + 80000 +}; + +static int find_trange_value(int trange) +{ + int i; + + for (i = 0; i < NUM_TRANGE_VALUES; i++) + if (trange_values[i] == trange) + return i; + + return -ENODEV; +} + +static struct adt7462_data *adt7462_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + /* + * Reading the fractional register locks the integral + * register until both have been read. + */ + data->temp_frac[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i)); + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i) + 1); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan[i] = adt7462_read_word_data(client, + ADT7462_REG_FAN(i)); + + data->fan_enabled = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_ENABLE); + + for (i = 0; i < ADT7462_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM(i)); + + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++) + data->pin_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PIN_CFG(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT(data, i); + if (!reg) + data->voltages[i] = 0; + else + data->voltages[i] = i2c_smbus_read_byte_data(client, + reg); + } + + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1); + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2); + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3); + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MIN_REG(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MAX_REG(i)); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT_MAX(data, i); + data->volt_max[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + + reg = ADT7462_REG_VOLT_MIN(data, i); + data->volt_min[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + } + + for (i = 0; i < ADT7462_PWM_COUNT; i++) { + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_MIN(i)); + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TMIN(i)); + data->pwm_trange[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TRANGE(i)); + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_CFG(i)); + } + + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX); + + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64)); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = (temp / 1000) + 64; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64)); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = (temp / 1000) + 64; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET; + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) + + 250 * frac); +} + +static ssize_t show_temp_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", temp_label(data, attr->index)); +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_max[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp /= x; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->volt_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MAX(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_min[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp /= x; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->volt_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MIN(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->voltages[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_voltage_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", voltage_label(data, attr->index)); +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT; + int mask = attr->index & ADT7462_ALARM_FLAG_MASK; + + if (data->alarms[reg] & mask) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static int fan_enabled(struct adt7462_data *data, int fan) +{ + return data->fan_enabled & (1 << fan); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u16 temp; + + temp = data->fan_min[attr->index]; + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(temp)) + return sprintf(buf, "0\n"); + + temp <<= 8; + + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp)); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp || + !fan_enabled(data, attr->index)) + return -EINVAL; + + temp = FAN_RPM_TO_PERIOD(temp); + temp >>= 8; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); +} + +static ssize_t show_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0)); +} + +static ssize_t set_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + u8 reg; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + if (temp) + reg |= ADT7462_FSPD_MASK; + else + reg &= ~ADT7462_FSPD_MASK; + data->cfg2 = reg; + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm_max = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK)); +} + +static ssize_t set_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 15)) + return -EINVAL; + + /* package things up */ + temp &= ADT7462_PWM_HYST_MASK; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + /* tmax = tmin + trange */ + int trange = trange_values[data->pwm_trange[attr->index] >> + ADT7462_PWM_RANGE_SHIFT]; + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + + return sprintf(buf, "%d\n", tmin + trange); +} + +static ssize_t set_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int tmin, trange_value; + long trange; + + if (strict_strtol(buf, 10, &trange)) + return -EINVAL; + + /* trange = tmax - tmin */ + tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + trange_value = find_trange_value(trange - tmin); + + if (trange_value < 0) + return -EINVAL; + + temp = trange_value << ADT7462_PWM_RANGE_SHIFT; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64)); +} + +static ssize_t set_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = (temp / 1000) + 64; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (cfg) { + case 4: /* off */ + return sprintf(buf, "0\n"); + case 7: /* manual */ + return sprintf(buf, "1\n"); + default: /* automatic */ + return sprintf(buf, "2\n"); + } +} + +static void set_pwm_channel(struct i2c_client *client, + struct adt7462_data *data, + int which, + int value) +{ + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK; + temp |= value << ADT7462_PWM_CHANNEL_SHIFT; + + mutex_lock(&data->lock); + data->pwm_cfg[which] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp); + mutex_unlock(&data->lock); +} + +static ssize_t set_pwm_auto(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + switch (temp) { + case 0: /* off */ + set_pwm_channel(client, data, attr->index, 4); + return count; + case 1: /* manual */ + set_pwm_channel(client, data, attr->index, 7); + return count; + default: + return -EINVAL; + } +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (channel) { + case 0: /* temp[1234] only */ + case 1: + case 2: + case 3: + return sprintf(buf, "%d\n", (1 << channel)); + case 5: /* temp1 & temp4 */ + return sprintf(buf, "9\n"); + case 6: + return sprintf(buf, "15\n"); + default: + return sprintf(buf, "0\n"); + } +} + +static int cvt_auto_temp(int input) +{ + if (input == 0xF) + return 6; + if (input == 0x9) + return 5; + if (input < 1 || !is_power_of_2(input)) + return -EINVAL; + return ilog2(input); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); + if (temp < 0) + return temp; + + set_pwm_channel(client, data, attr->index, temp); + + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R1T_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R2T_ALARM); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R3T_ALARM); + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 2); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 3); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 4); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 5); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 6); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 7); +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 8); +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 9); +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 10); +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 11); +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 12); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 2); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 3); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 4); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 5); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 6); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 7); +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 8); +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 9); +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 10); +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 11); +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 12); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V0_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V7_ALARM); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V2_ALARM); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V6_ALARM); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V5_ALARM); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V4_ALARM); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V3_ALARM); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V1_ALARM); +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V10_ALARM); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V9_ALARM); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V8_ALARM); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V11_ALARM); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V12_ALARM); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F0_ALARM); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F1_ALARM); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F2_ALARM); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F3_ALARM); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F4_ALARM); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F5_ALARM); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F6_ALARM); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F7_ALARM); + +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO, + show_force_pwm_max, set_force_pwm_max, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 3); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 2); +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 3); + +static struct attribute *adt7462_attr[] = +{ + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, + + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + + &sensor_dev_attr_force_pwm_max.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm4_enable.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, + ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "adt7462", I2C_NAME_SIZE); + + return 0; +} + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7462_data *data; + int err; + + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7462_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7462_remove(struct i2c_client *client) +{ + struct adt7462_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init adt7462_init(void) +{ + return i2c_add_driver(&adt7462_driver); +} + +static void __exit adt7462_exit(void) +{ + i2c_del_driver(&adt7462_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ADT7462 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7462_init); +module_exit(adt7462_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 02/12] adt7462: New hwmon driver @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors New driver to feed on. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. v2: Fix a problem where pwm*_auto_point*_temp should have been temp*_auto_point*_temp. Also enable DMI autoprobing at least for me. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/adt7462 | 67 + drivers/hwmon/Kconfig | 10 drivers/hwmon/Makefile | 1 drivers/hwmon/adt7462.c | 2009 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2087 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462 new file mode 100644 index 0000000..ec660b3 --- /dev/null +++ b/Documentation/hwmon/adt7462 @@ -0,0 +1,67 @@ +Kernel driver adt7462 +=========== + +Supported chips: + * Analog Devices ADT7462 + Prefix: 'adt7462' + Addresses scanned: I2C 0x58, 0x5C + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7462 chip family. + +This chip is a bit of a beast. It has 8 counters for measuring fan speed. It +can also measure 13 voltages or 4 temperatures, or various combinations of the +two. See the chip documentation for more details about the exact set of +configurations. This driver does not allow one to configure the chip; that is +left to the system designer. + +A sophisticated control system for the PWM outputs is designed into the ADT7462 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7462 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT7462 will signal an ALARM if +any measured value exceeds either limit. + +The ADT7462 samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7462 have a 10-bit ADC and can therefore measure temperatures +with 0.25 degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +The driver will report sensor labels when it is able to determine that +information from the configuration registers. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7462 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds temp#_max. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index d402e8d..0341b29 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -159,6 +159,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 950134a..836b277 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c new file mode 100644 index 0000000..fe642ab --- /dev/null +++ b/drivers/hwmon/adt7462.c @@ -0,0 +1,2009 @@ +/* + * A hwmon driver for the Analog Devices ADT7462 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7462); + +/* ADT7462 registers */ +#define ADT7462_REG_DEVICE 0x3D +#define ADT7462_REG_VENDOR 0x3E +#define ADT7462_REG_REVISION 0x3F + +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44 +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47 +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48 +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B +#define ADT7462_REG_TEMP_BASE_ADDR 0x88 +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F + +#define ADT7462_REG_FAN_BASE_ADDR 0x98 +#define ADT7462_REG_FAN_MAX_ADDR 0x9F +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2 +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9 +#define ADT7462_REG_FAN_ENABLE 0x07 +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78 +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F + +#define ADT7462_REG_CFG2 0x02 +#define ADT7462_FSPD_MASK 0x20 + +#define ADT7462_REG_PWM_BASE_ADDR 0xAA +#define ADT7462_REG_PWM_MAX_ADDR 0xAD +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28 +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B +#define ADT7462_REG_PWM_MAX 0x2C +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60 +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63 +#define ADT7462_PWM_HYST_MASK 0x0F +#define ADT7462_PWM_RANGE_MASK 0xF0 +#define ADT7462_PWM_RANGE_SHIFT 4 +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21 +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24 +#define ADT7462_PWM_CHANNEL_MASK 0xE0 +#define ADT7462_PWM_CHANNEL_SHIFT 5 + +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10 +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13 +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */ +#define ADT7462_DIODE3_INPUT 0x20 +#define ADT7462_DIODE1_INPUT 0x40 +#define ADT7462_VID_INPUT 0x80 +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */ +#define ADT7462_PIN21_INPUT 0x08 +#define ADT7462_PIN19_INPUT 0x10 +#define ADT7462_PIN15_INPUT 0x20 +#define ADT7462_PIN13_INPUT 0x40 +#define ADT7462_PIN8_INPUT 0x80 +#define ADT7462_PIN23_MASK 0x03 +#define ADT7462_PIN23_SHIFT 0 +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */ +#define ADT7462_PIN26_SHIFT 2 +#define ADT7462_PIN25_MASK 0x30 +#define ADT7462_PIN25_SHIFT 4 +#define ADT7462_PIN24_MASK 0xC0 +#define ADT7462_PIN24_SHIFT 6 +#define ADT7462_PIN26_VOLT_INPUT 0x08 +#define ADT7462_PIN25_VOLT_INPUT 0x20 +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_VOLT 0x5 + +#define ADT7462_REG_ALARM1 0xB8 +#define ADT7462_LT_ALARM 0x02 +#define ADT7462_R1T_ALARM 0x04 +#define ADT7462_R2T_ALARM 0x08 +#define ADT7462_R3T_ALARM 0x10 +#define ADT7462_REG_ALARM2 0xBB +#define ADT7462_V0_ALARM 0x01 +#define ADT7462_V1_ALARM 0x02 +#define ADT7462_V2_ALARM 0x04 +#define ADT7462_V3_ALARM 0x08 +#define ADT7462_V4_ALARM 0x10 +#define ADT7462_V5_ALARM 0x20 +#define ADT7462_V6_ALARM 0x40 +#define ADT7462_V7_ALARM 0x80 +#define ADT7462_REG_ALARM3 0xBC +#define ADT7462_V8_ALARM 0x08 +#define ADT7462_V9_ALARM 0x10 +#define ADT7462_V10_ALARM 0x20 +#define ADT7462_V11_ALARM 0x40 +#define ADT7462_V12_ALARM 0x80 +#define ADT7462_REG_ALARM4 0xBD +#define ADT7462_F0_ALARM 0x01 +#define ADT7462_F1_ALARM 0x02 +#define ADT7462_F2_ALARM 0x04 +#define ADT7462_F3_ALARM 0x08 +#define ADT7462_F4_ALARM 0x10 +#define ADT7462_F5_ALARM 0x20 +#define ADT7462_F6_ALARM 0x40 +#define ADT7462_F7_ALARM 0x80 +#define ADT7462_ALARM1 0x0000 +#define ADT7462_ALARM2 0x0100 +#define ADT7462_ALARM3 0x0200 +#define ADT7462_ALARM4 0x0300 +#define ADT7462_ALARM_REG_SHIFT 8 +#define ADT7462_ALARM_FLAG_MASK 0x0F + +#define ADT7462_TEMP_COUNT 4 +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2)) +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x)) +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x)) +#define TEMP_FRAC_OFFSET 6 + +#define ADT7462_FAN_COUNT 8 +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x)) + +#define ADT7462_PWM_COUNT 4 +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TMIN(x) \ + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TRANGE(x) \ + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x)) + +#define ADT7462_PIN_CFG_REG_COUNT 4 +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x)) + +#define ADT7462_ALARM_REG_COUNT 4 + +/* + * The chip can measure 13 different voltage sources: + * + * 1. +12V1 (pin 7) + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23) + * 3. +12V3 (pin 22) + * 4. +5V (pin 21) + * 5. +1.25V/+0.9V (pin 19) + * 6. +2.5V/+1.8V (pin 15) + * 7. +3.3v (pin 13) + * 8. +12V2 (pin 8) + * 9. Vbatt/FSB_Vtt (pin 26) + * A. +3.3V/+1.2V1 (pin 25) + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24) + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V) + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V) + * + * Each of these 13 has a factor to convert raw to voltage. Even better, + * the pins can be connected to other sensors (tach/gpio/hot/etc), which + * makes the bookkeeping tricky. + * + * Some, but not all, of these voltages have low/high limits. + */ +#define ADT7462_VOLT_COUNT 12 + +#define ADT7462_VENDOR 0x41 +#define ADT7462_DEVICE 0x62 +/* datasheet only mentions a revision 4 */ +#define ADT7462_REVISION 0x04 + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +#define MASK_AND_SHIFT(value, prefix) \ + (((value) & prefix##_MASK) >> prefix##_SHIFT) + +struct adt7462_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 temp[ADT7462_TEMP_COUNT]; + /* bits 6-7 are quarter pieces of temp */ + u8 temp_frac[ADT7462_TEMP_COUNT]; + u8 temp_min[ADT7462_TEMP_COUNT]; + u8 temp_max[ADT7462_TEMP_COUNT]; + u16 fan[ADT7462_FAN_COUNT]; + u8 fan_enabled; + u8 fan_min[ADT7462_FAN_COUNT]; + u8 cfg2; + u8 pwm[ADT7462_PWM_COUNT]; + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT]; + u8 voltages[ADT7462_VOLT_COUNT]; + u8 volt_max[ADT7462_VOLT_COUNT]; + u8 volt_min[ADT7462_VOLT_COUNT]; + u8 pwm_min[ADT7462_PWM_COUNT]; + u8 pwm_tmin[ADT7462_PWM_COUNT]; + u8 pwm_trange[ADT7462_PWM_COUNT]; + u8 pwm_max; /* only one per chip */ + u8 pwm_cfg[ADT7462_PWM_COUNT]; + u8 alarms[ADT7462_ALARM_REG_COUNT]; +}; + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7462_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7462_id[] = { + { "adt7462", adt7462 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7462_id); + +static struct i2c_driver adt7462_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7462", + }, + .probe = adt7462_probe, + .remove = adt7462_remove, + .id_table = adt7462_id, + .detect = adt7462_detect, + .address_data = &addr_data, +}; + +/* + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +static inline int range_check(long val, long min, long max) +{ + return val >= min && val <= max; +} + +/* For some reason these registers are not contiguous. */ +static int ADT7462_REG_FAN(int fan) +{ + if (fan < 4) + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan); + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4)); +} + +/* Voltage registers are scattered everywhere */ +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x7C; + break; + case 1: + return 0x69; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x7F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x7E; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x4B; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x49; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x68; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x7D; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x6C; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x6B; + break; + case 10: + return 0x6A; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x50; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x4C; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x6D; + break; + case 1: + return 0x72; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x6F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x71; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x47; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x45; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x70; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x6E; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x75; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x74; + break; + case 10: + return 0x73; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x76; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x77; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0xA3; + break; + case 1: + return 0x90; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0xA9; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0xA7; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x8F; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x8B; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x96; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0xA5; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x93; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x92; + break; + case 10: + return 0x91; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x94; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x95; + break; + } + return -ENODEV; +} + +/* Provide labels for sysfs */ +static const char *voltage_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return "+12V1"; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + return "Vccp1"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5V"; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return "+12V3"; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return "+5V"; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+0.9V"; + return "+1.25V"; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+1.8V"; + return "+2.5V"; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return "+3.3V"; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return "+12V2"; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return "Vbatt"; + case 1: + return "FSB_Vtt"; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return "+3.3V"; + case 1: + return "+1.2V1"; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return "Vccp2"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5"; + } + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V ICH"; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V 3GPIO"; + break; + } + return "N/A"; +} + +/* Multipliers are actually in uV, not mV. */ +static int voltage_multiplier(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 62500; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + if (data->pin_cfg[0] & ADT7462_VID_INPUT) + return 12500; + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 62500; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 26000; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return 4690; + return 6500; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT) + return 9400; + return 13000; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 17200; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 62500; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return 15600; + case 1: + return 6250; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return 17200; + case 1: + return 6250; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 11: + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT = + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 7800; + } + return 0; +} + +static int temp_enabled(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + case 2: + return 1; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return 1; + break; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return 1; + break; + } + return 0; +} + +static const char *temp_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + return "local"; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return "remote1"; + break; + case 2: + return "remote2"; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return "remote3"; + break; + } + return "N/A"; +} + +/* Map Trange register values to mC */ +#define NUM_TRANGE_VALUES 16 +static const int trange_values[NUM_TRANGE_VALUES] = { + 2000, + 2500, + 3300, + 4000, + 5000, + 6700, + 8000, + 10000, + 13300, + 16000, + 20000, + 26700, + 32000, + 40000, + 53300, + 80000 +}; + +static int find_trange_value(int trange) +{ + int i; + + for (i = 0; i < NUM_TRANGE_VALUES; i++) + if (trange_values[i] = trange) + return i; + + return -ENODEV; +} + +static struct adt7462_data *adt7462_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + /* + * Reading the fractional register locks the integral + * register until both have been read. + */ + data->temp_frac[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i)); + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i) + 1); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan[i] = adt7462_read_word_data(client, + ADT7462_REG_FAN(i)); + + data->fan_enabled = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_ENABLE); + + for (i = 0; i < ADT7462_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM(i)); + + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++) + data->pin_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PIN_CFG(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT(data, i); + if (!reg) + data->voltages[i] = 0; + else + data->voltages[i] = i2c_smbus_read_byte_data(client, + reg); + } + + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1); + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2); + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3); + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MIN_REG(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MAX_REG(i)); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT_MAX(data, i); + data->volt_max[i] + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + + reg = ADT7462_REG_VOLT_MIN(data, i); + data->volt_min[i] + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + } + + for (i = 0; i < ADT7462_PWM_COUNT; i++) { + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_MIN(i)); + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TMIN(i)); + data->pwm_trange[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TRANGE(i)); + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_CFG(i)); + } + + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX); + + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64)); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = (temp / 1000) + 64; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64)); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = (temp / 1000) + 64; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET; + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) + + 250 * frac); +} + +static ssize_t show_temp_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", temp_label(data, attr->index)); +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_max[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp /= x; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->volt_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MAX(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_min[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp /= x; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->volt_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MIN(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->voltages[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_voltage_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", voltage_label(data, attr->index)); +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT; + int mask = attr->index & ADT7462_ALARM_FLAG_MASK; + + if (data->alarms[reg] & mask) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static int fan_enabled(struct adt7462_data *data, int fan) +{ + return data->fan_enabled & (1 << fan); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u16 temp; + + temp = data->fan_min[attr->index]; + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(temp)) + return sprintf(buf, "0\n"); + + temp <<= 8; + + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp)); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp || + !fan_enabled(data, attr->index)) + return -EINVAL; + + temp = FAN_RPM_TO_PERIOD(temp); + temp >>= 8; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); +} + +static ssize_t show_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0)); +} + +static ssize_t set_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + u8 reg; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + if (temp) + reg |= ADT7462_FSPD_MASK; + else + reg &= ~ADT7462_FSPD_MASK; + data->cfg2 = reg; + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm_max = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK)); +} + +static ssize_t set_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 15)) + return -EINVAL; + + /* package things up */ + temp &= ADT7462_PWM_HYST_MASK; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + /* tmax = tmin + trange */ + int trange = trange_values[data->pwm_trange[attr->index] >> + ADT7462_PWM_RANGE_SHIFT]; + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + + return sprintf(buf, "%d\n", tmin + trange); +} + +static ssize_t set_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int tmin, trange_value; + long trange; + + if (strict_strtol(buf, 10, &trange)) + return -EINVAL; + + /* trange = tmax - tmin */ + tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + trange_value = find_trange_value(trange - tmin); + + if (trange_value < 0) + return -EINVAL; + + temp = trange_value << ADT7462_PWM_RANGE_SHIFT; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64)); +} + +static ssize_t set_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = (temp / 1000) + 64; + if (!range_check(temp, 0, 255)) + return -EINVAL; + + mutex_lock(&data->lock); + data->pwm_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (cfg) { + case 4: /* off */ + return sprintf(buf, "0\n"); + case 7: /* manual */ + return sprintf(buf, "1\n"); + default: /* automatic */ + return sprintf(buf, "2\n"); + } +} + +static void set_pwm_channel(struct i2c_client *client, + struct adt7462_data *data, + int which, + int value) +{ + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK; + temp |= value << ADT7462_PWM_CHANNEL_SHIFT; + + mutex_lock(&data->lock); + data->pwm_cfg[which] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp); + mutex_unlock(&data->lock); +} + +static ssize_t set_pwm_auto(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + switch (temp) { + case 0: /* off */ + set_pwm_channel(client, data, attr->index, 4); + return count; + case 1: /* manual */ + set_pwm_channel(client, data, attr->index, 7); + return count; + default: + return -EINVAL; + } +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (channel) { + case 0: /* temp[1234] only */ + case 1: + case 2: + case 3: + return sprintf(buf, "%d\n", (1 << channel)); + case 5: /* temp1 & temp4 */ + return sprintf(buf, "9\n"); + case 6: + return sprintf(buf, "15\n"); + default: + return sprintf(buf, "0\n"); + } +} + +static int cvt_auto_temp(int input) +{ + if (input = 0xF) + return 6; + if (input = 0x9) + return 5; + if (input < 1 || !is_power_of_2(input)) + return -EINVAL; + return ilog2(input); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); + if (temp < 0) + return temp; + + set_pwm_channel(client, data, attr->index, temp); + + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R1T_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R2T_ALARM); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R3T_ALARM); + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 2); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 3); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 4); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 5); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 6); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 7); +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 8); +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 9); +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 10); +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 11); +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 12); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 2); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 3); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 4); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 5); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 6); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 7); +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 8); +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 9); +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 10); +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 11); +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 12); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V0_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V7_ALARM); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V2_ALARM); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V6_ALARM); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V5_ALARM); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V4_ALARM); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V3_ALARM); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V1_ALARM); +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V10_ALARM); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V9_ALARM); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V8_ALARM); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V11_ALARM); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V12_ALARM); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F0_ALARM); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F1_ALARM); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F2_ALARM); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F3_ALARM); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F4_ALARM); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F5_ALARM); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F6_ALARM); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F7_ALARM); + +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO, + show_force_pwm_max, set_force_pwm_max, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 3); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 2); +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 3); + +static struct attribute *adt7462_attr[] +{ + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, + + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + + &sensor_dev_attr_force_pwm_max.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm4_enable.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, + ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "adt7462", I2C_NAME_SIZE); + + return 0; +} + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7462_data *data; + int err; + + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7462_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7462_remove(struct i2c_client *client) +{ + struct adt7462_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init adt7462_init(void) +{ + return i2c_add_driver(&adt7462_driver); +} + +static void __exit adt7462_exit(void) +{ + i2c_del_driver(&adt7462_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ADT7462 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7462_init); +module_exit(adt7462_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 03/12] adt7473: Fix some bogosity in documentation file. 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:18 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/adt7473 | 30 +++++++++++------------------- 1 files changed, 11 insertions(+), 19 deletions(-) diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 index 2126de3..8bffc41 100644 --- a/Documentation/hwmon/adt7473 +++ b/Documentation/hwmon/adt7473 @@ -14,18 +14,18 @@ Description This driver implements support for the Analog Devices ADT7473 chip family. -The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 +The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 specification. Using an analog to digital converter it measures three (3) -temperatures and two (2) voltages. It has three (3) 16-bit counters for -measuring fan speed. There are three (3) PWM outputs that can be used -to control fan speed. +temperatures and two (2) voltages. It has four (4) 16-bit counters for +measuring fan speed. There are three (3) PWM outputs that can be used to +control fan speed. -A sophisticated control system for the PWM outputs is designed into the -LM85 that allows fan speed to be adjusted automatically based on any of the -three temperature sensors. Each PWM output is individually adjustable and +A sophisticated control system for the PWM outputs is designed into the ADT7473 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and programmable. Once configured, the ADT7473 will adjust the PWM outputs in -response to the measured temperatures without further host intervention. -This feature can also be disabled for manual control of the PWM's. +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. Each of the measured inputs (voltage, temperature, fan speed) has corresponding high/low limit values. The ADT7473 will signal an ALARM if @@ -46,14 +46,6 @@ from the raw value to get the temperature value. The Analog Devices datasheet is very detailed and describes a procedure for determining an optimal configuration for the automatic PWM control. -Hardware Configurations ------------------------ - -The ADT7473 chips have an optional SMBALERT output that can be used to -signal the chipset in case a limit is exceeded or the temperature sensors -fail. Individual sensor interrupts can be masked so they won't trigger -SMBALERT. The SMBALERT output if configured replaces the PWM2 function. - Configuration Notes ------------------- @@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: * PWM Control -* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and -* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - point1: Set the pwm speed at a lower temperature bound. point2: Set the pwm speed at a higher temperature bound. ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 03/12] adt7473: Fix some bogosity in @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/adt7473 | 30 +++++++++++------------------- 1 files changed, 11 insertions(+), 19 deletions(-) diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 index 2126de3..8bffc41 100644 --- a/Documentation/hwmon/adt7473 +++ b/Documentation/hwmon/adt7473 @@ -14,18 +14,18 @@ Description This driver implements support for the Analog Devices ADT7473 chip family. -The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 +The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 specification. Using an analog to digital converter it measures three (3) -temperatures and two (2) voltages. It has three (3) 16-bit counters for -measuring fan speed. There are three (3) PWM outputs that can be used -to control fan speed. +temperatures and two (2) voltages. It has four (4) 16-bit counters for +measuring fan speed. There are three (3) PWM outputs that can be used to +control fan speed. -A sophisticated control system for the PWM outputs is designed into the -LM85 that allows fan speed to be adjusted automatically based on any of the -three temperature sensors. Each PWM output is individually adjustable and +A sophisticated control system for the PWM outputs is designed into the ADT7473 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and programmable. Once configured, the ADT7473 will adjust the PWM outputs in -response to the measured temperatures without further host intervention. -This feature can also be disabled for manual control of the PWM's. +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. Each of the measured inputs (voltage, temperature, fan speed) has corresponding high/low limit values. The ADT7473 will signal an ALARM if @@ -46,14 +46,6 @@ from the raw value to get the temperature value. The Analog Devices datasheet is very detailed and describes a procedure for determining an optimal configuration for the automatic PWM control. -Hardware Configurations ------------------------ - -The ADT7473 chips have an optional SMBALERT output that can be used to -signal the chipset in case a limit is exceeded or the temperature sensors -fail. Individual sensor interrupts can be masked so they won't trigger -SMBALERT. The SMBALERT output if configured replaces the PWM2 function. - Configuration Notes ------------------- @@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: * PWM Control -* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and -* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - point1: Set the pwm speed at a lower temperature bound. point2: Set the pwm speed at a higher temperature bound. _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 03/12] adt7473: Fix some bogosity in documentation file. 2008-10-07 1:18 ` [lm-sensors] [PATCH 03/12] adt7473: Fix some bogosity in Darrick J. Wong @ 2008-10-08 9:08 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 9:08 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:39 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/adt7473 | 30 +++++++++++------------------- > 1 files changed, 11 insertions(+), 19 deletions(-) > > diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 > index 2126de3..8bffc41 100644 > --- a/Documentation/hwmon/adt7473 > +++ b/Documentation/hwmon/adt7473 > @@ -14,18 +14,18 @@ Description > > This driver implements support for the Analog Devices ADT7473 chip family. > > -The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 > +The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 > specification. Using an analog to digital converter it measures three (3) > -temperatures and two (2) voltages. It has three (3) 16-bit counters for > -measuring fan speed. There are three (3) PWM outputs that can be used > -to control fan speed. > +temperatures and two (2) voltages. It has four (4) 16-bit counters for > +measuring fan speed. There are three (3) PWM outputs that can be used to > +control fan speed. > > -A sophisticated control system for the PWM outputs is designed into the > -LM85 that allows fan speed to be adjusted automatically based on any of the > -three temperature sensors. Each PWM output is individually adjustable and > +A sophisticated control system for the PWM outputs is designed into the ADT7473 > +that allows fan speed to be adjusted automatically based on any of the three > +temperature sensors. Each PWM output is individually adjustable and > programmable. Once configured, the ADT7473 will adjust the PWM outputs in > -response to the measured temperatures without further host intervention. > -This feature can also be disabled for manual control of the PWM's. > +response to the measured temperatures without further host intervention. This > +feature can also be disabled for manual control of the PWM's. The (unneeded) reformatting of the paragraphs makes the changes look much bigger than they really are. This doesn't help reviewing. I've reverted these changes. > > Each of the measured inputs (voltage, temperature, fan speed) has > corresponding high/low limit values. The ADT7473 will signal an ALARM if > @@ -46,14 +46,6 @@ from the raw value to get the temperature value. > The Analog Devices datasheet is very detailed and describes a procedure for > determining an optimal configuration for the automatic PWM control. > > -Hardware Configurations > ------------------------ > - > -The ADT7473 chips have an optional SMBALERT output that can be used to > -signal the chipset in case a limit is exceeded or the temperature sensors > -fail. Individual sensor interrupts can be masked so they won't trigger > -SMBALERT. The SMBALERT output if configured replaces the PWM2 function. > - > Configuration Notes > ------------------- > > @@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: > > * PWM Control > > -* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and > -* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - > +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and > +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - > > point1: Set the pwm speed at a lower temperature bound. > point2: Set the pwm speed at a higher temperature bound. Patch applied, thanks. -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 03/12] adt7473: Fix some bogosity in @ 2008-10-08 9:08 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 9:08 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:39 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/adt7473 | 30 +++++++++++------------------- > 1 files changed, 11 insertions(+), 19 deletions(-) > > diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 > index 2126de3..8bffc41 100644 > --- a/Documentation/hwmon/adt7473 > +++ b/Documentation/hwmon/adt7473 > @@ -14,18 +14,18 @@ Description > > This driver implements support for the Analog Devices ADT7473 chip family. > > -The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 > +The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 > specification. Using an analog to digital converter it measures three (3) > -temperatures and two (2) voltages. It has three (3) 16-bit counters for > -measuring fan speed. There are three (3) PWM outputs that can be used > -to control fan speed. > +temperatures and two (2) voltages. It has four (4) 16-bit counters for > +measuring fan speed. There are three (3) PWM outputs that can be used to > +control fan speed. > > -A sophisticated control system for the PWM outputs is designed into the > -LM85 that allows fan speed to be adjusted automatically based on any of the > -three temperature sensors. Each PWM output is individually adjustable and > +A sophisticated control system for the PWM outputs is designed into the ADT7473 > +that allows fan speed to be adjusted automatically based on any of the three > +temperature sensors. Each PWM output is individually adjustable and > programmable. Once configured, the ADT7473 will adjust the PWM outputs in > -response to the measured temperatures without further host intervention. > -This feature can also be disabled for manual control of the PWM's. > +response to the measured temperatures without further host intervention. This > +feature can also be disabled for manual control of the PWM's. The (unneeded) reformatting of the paragraphs makes the changes look much bigger than they really are. This doesn't help reviewing. I've reverted these changes. > > Each of the measured inputs (voltage, temperature, fan speed) has > corresponding high/low limit values. The ADT7473 will signal an ALARM if > @@ -46,14 +46,6 @@ from the raw value to get the temperature value. > The Analog Devices datasheet is very detailed and describes a procedure for > determining an optimal configuration for the automatic PWM control. > > -Hardware Configurations > ------------------------ > - > -The ADT7473 chips have an optional SMBALERT output that can be used to > -signal the chipset in case a limit is exceeded or the temperature sensors > -fail. Individual sensor interrupts can be masked so they won't trigger > -SMBALERT. The SMBALERT output if configured replaces the PWM2 function. > - > Configuration Notes > ------------------- > > @@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: > > * PWM Control > > -* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and > -* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - > +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and > +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - > > point1: Set the pwm speed at a lower temperature bound. > point2: Set the pwm speed at a higher temperature bound. Patch applied, thanks. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be temp*-auto-point* 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:18 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors It turns out that Tmin/Tmax should be attached to the temperature sensors, not to the pwm control. Fix my misinterpretation of the datasheet. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7470.c | 32 ++++++++++++++++---------------- 1 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index d368d8f..656bf3d 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -888,22 +888,22 @@ static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, show_pwm_max, set_pwm_max, 3); -static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 0); -static SENSOR_DEVICE_ATTR(pwm2_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 1); -static SENSOR_DEVICE_ATTR(pwm3_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 2); -static SENSOR_DEVICE_ATTR(pwm4_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 3); -static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 0); -static SENSOR_DEVICE_ATTR(pwm2_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 1); -static SENSOR_DEVICE_ATTR(pwm3_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 2); -static SENSOR_DEVICE_ATTR(pwm4_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 3); static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, @@ -996,14 +996,14 @@ static struct attribute *adt7470_attr[] = &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors It turns out that Tmin/Tmax should be attached to the temperature sensors, not to the pwm control. Fix my misinterpretation of the datasheet. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7470.c | 32 ++++++++++++++++---------------- 1 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index d368d8f..656bf3d 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -888,22 +888,22 @@ static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, show_pwm_max, set_pwm_max, 3); -static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 0); -static SENSOR_DEVICE_ATTR(pwm2_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 1); -static SENSOR_DEVICE_ATTR(pwm3_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 2); -static SENSOR_DEVICE_ATTR(pwm4_auto_point1_temp, S_IWUSR | S_IRUGO, +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, show_pwm_tmin, set_pwm_tmin, 3); -static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 0); -static SENSOR_DEVICE_ATTR(pwm2_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 1); -static SENSOR_DEVICE_ATTR(pwm3_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 2); -static SENSOR_DEVICE_ATTR(pwm4_auto_point2_temp, S_IRUGO, show_pwm_tmax, +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IRUGO, show_pwm_tmax, NULL, 3); static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, @@ -996,14 +996,14 @@ static struct attribute *adt7470_attr[] &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be temp*-auto-point* 2008-10-07 1:18 ` [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be Darrick J. Wong @ 2008-10-08 9:25 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 9:25 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:44 -0700, Darrick J. Wong wrote: > It turns out that Tmin/Tmax should be attached to the temperature sensors, not > to the pwm control. Fix my misinterpretation of the datasheet. Really? I'm confused. The ADT7470 has 4 PWM outputs and 10 temperature inputs. There are only 4 Tmin registers. How can they be attached to temperature inputs? What about inputs temp5 to temp10? I think your original interpretation is correct and Tmin is attached to a PWM channel, and this patch is incorrect. What makes you think otherwise? > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/adt7470.c | 32 ++++++++++++++++---------------- > 1 files changed, 16 insertions(+), 16 deletions(-) > > diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c > index d368d8f..656bf3d 100644 > --- a/drivers/hwmon/adt7470.c > +++ b/drivers/hwmon/adt7470.c > @@ -888,22 +888,22 @@ static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, > static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, > show_pwm_max, set_pwm_max, 3); > > -static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 0); > -static SENSOR_DEVICE_ATTR(pwm2_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 1); > -static SENSOR_DEVICE_ATTR(pwm3_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 2); > -static SENSOR_DEVICE_ATTR(pwm4_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 3); > > -static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 0); > -static SENSOR_DEVICE_ATTR(pwm2_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 1); > -static SENSOR_DEVICE_ATTR(pwm3_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 2); > -static SENSOR_DEVICE_ATTR(pwm4_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 3); > > static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, > @@ -996,14 +996,14 @@ static struct attribute *adt7470_attr[] = > &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, > &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, > &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, > - &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, > - &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, > - &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, > - &sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, > &sensor_dev_attr_pwm1_enable.dev_attr.attr, > &sensor_dev_attr_pwm2_enable.dev_attr.attr, > &sensor_dev_attr_pwm3_enable.dev_attr.attr, > > > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be @ 2008-10-08 9:25 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 9:25 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:44 -0700, Darrick J. Wong wrote: > It turns out that Tmin/Tmax should be attached to the temperature sensors, not > to the pwm control. Fix my misinterpretation of the datasheet. Really? I'm confused. The ADT7470 has 4 PWM outputs and 10 temperature inputs. There are only 4 Tmin registers. How can they be attached to temperature inputs? What about inputs temp5 to temp10? I think your original interpretation is correct and Tmin is attached to a PWM channel, and this patch is incorrect. What makes you think otherwise? > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/adt7470.c | 32 ++++++++++++++++---------------- > 1 files changed, 16 insertions(+), 16 deletions(-) > > diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c > index d368d8f..656bf3d 100644 > --- a/drivers/hwmon/adt7470.c > +++ b/drivers/hwmon/adt7470.c > @@ -888,22 +888,22 @@ static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, > static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, > show_pwm_max, set_pwm_max, 3); > > -static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 0); > -static SENSOR_DEVICE_ATTR(pwm2_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 1); > -static SENSOR_DEVICE_ATTR(pwm3_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 2); > -static SENSOR_DEVICE_ATTR(pwm4_auto_point1_temp, S_IWUSR | S_IRUGO, > +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, > show_pwm_tmin, set_pwm_tmin, 3); > > -static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 0); > -static SENSOR_DEVICE_ATTR(pwm2_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 1); > -static SENSOR_DEVICE_ATTR(pwm3_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 2); > -static SENSOR_DEVICE_ATTR(pwm4_auto_point2_temp, S_IRUGO, show_pwm_tmax, > +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IRUGO, show_pwm_tmax, > NULL, 3); > > static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, > @@ -996,14 +996,14 @@ static struct attribute *adt7470_attr[] > &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, > &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, > &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, > - &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr, > - &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, > - &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, > - &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, > - &sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, > + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, > + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, > &sensor_dev_attr_pwm1_enable.dev_attr.attr, > &sensor_dev_attr_pwm2_enable.dev_attr.attr, > &sensor_dev_attr_pwm3_enable.dev_attr.attr, > > > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to 2008-10-07 1:18 ` [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be Darrick J. Wong (?) (?) @ 2008-10-08 18:36 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-08 18:36 UTC (permalink / raw) To: lm-sensors On Wed, Oct 08, 2008 at 11:25:29AM +0200, Jean Delvare wrote: > Hi Darrick, > > On Mon, 06 Oct 2008 18:18:44 -0700, Darrick J. Wong wrote: > > It turns out that Tmin/Tmax should be attached to the temperature sensors, not > > to the pwm control. Fix my misinterpretation of the datasheet. > > Really? I'm confused. The ADT7470 has 4 PWM outputs and 10 temperature > inputs. There are only 4 Tmin registers. How can they be attached to > temperature inputs? What about inputs temp5 to temp10? I think your > original interpretation is correct and Tmin is attached to a PWM > channel, and this patch is incorrect. What makes you think otherwise? I think I confused myself, because the datasheets for the 7473/7462 claim that Tmin are attached to the temperature inputs, not to the pwm outputs. Clearly not the case for the 7470. Nack on this patch. --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 05/12] adt7470: Add documentation 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:18 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Add at least the bare minimum of documentation for this chip. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/adt7470 | 74 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 74 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 new file mode 100644 index 0000000..10f398b --- /dev/null +++ b/Documentation/hwmon/adt7470 @@ -0,0 +1,74 @@ +Kernel driver adt7470 +====================== + +Supported chips: + * Analog Devices ADT7470 + Prefix: 'adt7470' + Addresses scanned: I2C 0x2C, 0x2E, 0x2F + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7470 chip family. + +The ADT7470 uses the 2-wire interface compatible with the SMBUS 2.0 +specification. Using an analog to digital converter it measures ten (10) +temperatures. It has four (4) 16-bit counters for measuring fan speed. There +are four (4) PWM outputs that can be used to control fan speed. + +A sophisticated control system for the PWM outputs is designed into the ADT7470 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7470 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (temperature, fan speed) has corresponding high/low +limit values. The ADT7470 will signal an ALARM if any measured value exceeds +either limit. + +The ADT7470 DOES NOT sample all inputs continuously. A single pin on the +ADT7470 is connected to a multitude of thermal diodes, but the chip must be +instructed explicitly to read the multitude of diodes. If you want to use +automatic fan control mode, you must manually read any of the temperature +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip +design, given that many other AD chips take care of this. The driver will not +read the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7470 have a 8-bit ADC and can therefore measure temperatures +with 1 degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7470 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds temp#_max. + +Notes +----- + +As stated above, the temperature inputs must be read periodically from +userspace in order for the automatic pwm algorithm to run. ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 05/12] adt7470: Add documentation @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Add at least the bare minimum of documentation for this chip. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/adt7470 | 74 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 74 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 new file mode 100644 index 0000000..10f398b --- /dev/null +++ b/Documentation/hwmon/adt7470 @@ -0,0 +1,74 @@ +Kernel driver adt7470 +=========== + +Supported chips: + * Analog Devices ADT7470 + Prefix: 'adt7470' + Addresses scanned: I2C 0x2C, 0x2E, 0x2F + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7470 chip family. + +The ADT7470 uses the 2-wire interface compatible with the SMBUS 2.0 +specification. Using an analog to digital converter it measures ten (10) +temperatures. It has four (4) 16-bit counters for measuring fan speed. There +are four (4) PWM outputs that can be used to control fan speed. + +A sophisticated control system for the PWM outputs is designed into the ADT7470 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7470 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (temperature, fan speed) has corresponding high/low +limit values. The ADT7470 will signal an ALARM if any measured value exceeds +either limit. + +The ADT7470 DOES NOT sample all inputs continuously. A single pin on the +ADT7470 is connected to a multitude of thermal diodes, but the chip must be +instructed explicitly to read the multitude of diodes. If you want to use +automatic fan control mode, you must manually read any of the temperature +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip +design, given that many other AD chips take care of this. The driver will not +read the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7470 have a 8-bit ADC and can therefore measure temperatures +with 1 degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7470 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds temp#_max. + +Notes +----- + +As stated above, the temperature inputs must be read periodically from +userspace in order for the automatic pwm algorithm to run. _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 05/12] adt7470: Add documentation 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-08 9:46 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 9:46 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:49 -0700, Darrick J. Wong wrote: > > Add at least the bare minimum of documentation for this chip. > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/adt7470 | 74 +++++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 74 insertions(+), 0 deletions(-) > > diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 > new file mode 100644 > index 0000000..10f398b > --- /dev/null > +++ b/Documentation/hwmon/adt7470 > @@ -0,0 +1,74 @@ > +Kernel driver adt7470 > +====================== > + > +Supported chips: > + * Analog Devices ADT7470 > + Prefix: 'adt7470' > + Addresses scanned: I2C 0x2C, 0x2E, 0x2F > + Datasheet: Publicly available at the Analog Devices website > + > +Author: Darrick J. Wong > + > +Description > +----------- > + > +This driver implements support for the Analog Devices ADT7470 chip family. Family? The driver only supports one chip. > + > +The ADT7470 uses the 2-wire interface compatible with the SMBUS 2.0 SMBus > +specification. Using an analog to digital converter it measures ten (10) > +temperatures. It has four (4) 16-bit counters for measuring fan speed. There up to ten external temperatures > +are four (4) PWM outputs that can be used to control fan speed. > + > +A sophisticated control system for the PWM outputs is designed into the ADT7470 > +that allows fan speed to be adjusted automatically based on any of the three > +temperature sensors. Each PWM output is individually adjustable and ten temperature sensors > +programmable. Once configured, the ADT7470 will adjust the PWM outputs in > +response to the measured temperatures without further host intervention. This > +feature can also be disabled for manual control of the PWM's. > + > +Each of the measured inputs (temperature, fan speed) has corresponding high/low > +limit values. The ADT7470 will signal an ALARM if any measured value exceeds > +either limit. > + > +The ADT7470 DOES NOT sample all inputs continuously. A single pin on the > +ADT7470 is connected to a multitude of thermal diodes, but the chip must be > +instructed explicitly to read the multitude of diodes. If you want to use > +automatic fan control mode, you must manually read any of the temperature > +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS > +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip > +design, given that many other AD chips take care of this. The driver will not This is very weird. This pretty much voids the point of an automatic fan control mode. If you have to read registers continuously for it to work, you can as well control it completely in software. > +read the registers more often than once every other second. Further, Actually every 5 seconds according to the driver code. > +configuration data is only read once per minute. > + > +Special Features > +---------------- > + > +The ADT7470 have a 8-bit ADC and can therefore measure temperatures > +with 1 degC resolution. This "therefore" is incorrect. You can't deduce the physical resolution from the ADC resolution, you need to additionally know the LSB weight for that. > + > +The Analog Devices datasheet is very detailed and describes a procedure for > +determining an optimal configuration for the automatic PWM control. > + > +Configuration Notes > +------------------- > + > +Besides standard interfaces driver adds the following: > + > +* PWM Control > + > +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and > +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - > + > +point1: Set the pwm speed at a lower temperature bound. > +point2: Set the pwm speed at a higher temperature bound. > + > +The ADT7470 will scale the pwm between the lower and higher pwm speed when > +the temperature is between the two temperature boundaries. PWM values range > +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the > +temperature sensor associated with the PWM control exceeds temp#_max. > + > +Notes > +----- > + > +As stated above, the temperature inputs must be read periodically from > +userspace in order for the automatic pwm algorithm to run. Please send an updated patch. Out of curiosity: isn't it possible to detect how many thermal sensors are actually connected, and only create sysfs files for these? Creating files for sensors which do not exist is rather confusing. -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 05/12] adt7470: Add documentation @ 2008-10-08 9:46 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 9:46 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:49 -0700, Darrick J. Wong wrote: > > Add at least the bare minimum of documentation for this chip. > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/adt7470 | 74 +++++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 74 insertions(+), 0 deletions(-) > > diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 > new file mode 100644 > index 0000000..10f398b > --- /dev/null > +++ b/Documentation/hwmon/adt7470 > @@ -0,0 +1,74 @@ > +Kernel driver adt7470 > +=========== > + > +Supported chips: > + * Analog Devices ADT7470 > + Prefix: 'adt7470' > + Addresses scanned: I2C 0x2C, 0x2E, 0x2F > + Datasheet: Publicly available at the Analog Devices website > + > +Author: Darrick J. Wong > + > +Description > +----------- > + > +This driver implements support for the Analog Devices ADT7470 chip family. Family? The driver only supports one chip. > + > +The ADT7470 uses the 2-wire interface compatible with the SMBUS 2.0 SMBus > +specification. Using an analog to digital converter it measures ten (10) > +temperatures. It has four (4) 16-bit counters for measuring fan speed. There up to ten external temperatures > +are four (4) PWM outputs that can be used to control fan speed. > + > +A sophisticated control system for the PWM outputs is designed into the ADT7470 > +that allows fan speed to be adjusted automatically based on any of the three > +temperature sensors. Each PWM output is individually adjustable and ten temperature sensors > +programmable. Once configured, the ADT7470 will adjust the PWM outputs in > +response to the measured temperatures without further host intervention. This > +feature can also be disabled for manual control of the PWM's. > + > +Each of the measured inputs (temperature, fan speed) has corresponding high/low > +limit values. The ADT7470 will signal an ALARM if any measured value exceeds > +either limit. > + > +The ADT7470 DOES NOT sample all inputs continuously. A single pin on the > +ADT7470 is connected to a multitude of thermal diodes, but the chip must be > +instructed explicitly to read the multitude of diodes. If you want to use > +automatic fan control mode, you must manually read any of the temperature > +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS > +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip > +design, given that many other AD chips take care of this. The driver will not This is very weird. This pretty much voids the point of an automatic fan control mode. If you have to read registers continuously for it to work, you can as well control it completely in software. > +read the registers more often than once every other second. Further, Actually every 5 seconds according to the driver code. > +configuration data is only read once per minute. > + > +Special Features > +---------------- > + > +The ADT7470 have a 8-bit ADC and can therefore measure temperatures > +with 1 degC resolution. This "therefore" is incorrect. You can't deduce the physical resolution from the ADC resolution, you need to additionally know the LSB weight for that. > + > +The Analog Devices datasheet is very detailed and describes a procedure for > +determining an optimal configuration for the automatic PWM control. > + > +Configuration Notes > +------------------- > + > +Besides standard interfaces driver adds the following: > + > +* PWM Control > + > +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and > +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - > + > +point1: Set the pwm speed at a lower temperature bound. > +point2: Set the pwm speed at a higher temperature bound. > + > +The ADT7470 will scale the pwm between the lower and higher pwm speed when > +the temperature is between the two temperature boundaries. PWM values range > +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the > +temperature sensor associated with the PWM control exceeds temp#_max. > + > +Notes > +----- > + > +As stated above, the temperature inputs must be read periodically from > +userspace in order for the automatic pwm algorithm to run. Please send an updated patch. Out of curiosity: isn't it possible to detect how many thermal sensors are actually connected, and only create sysfs files for these? Creating files for sensors which do not exist is rather confusing. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 05/12] adt7470: Add documentation 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong (?) (?) @ 2008-10-08 18:50 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-08 18:50 UTC (permalink / raw) To: lm-sensors On Wed, Oct 08, 2008 at 11:46:47AM +0200, Jean Delvare wrote: > > +This driver implements support for the Analog Devices ADT7470 chip family. > > Family? The driver only supports one chip. I've not exhaustively researched their other chips, so I don't know if there are successor chips that adhere to the 7470's interface. Given that they have a history of doing that, I'm assuming that at some point it will be a family. <snip; will pick up the fixes> > > +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS > > +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip > > +design, given that many other AD chips take care of this. The driver will not > > This is very weird. This pretty much voids the point of an automatic > fan control mode. If you have to read registers continuously for it to > work, you can as well control it completely in software. Yes. Given the _long_ time it takes to read the external sensors and the chip being locked during those reads, I could see why they don't want to do automatic sensor reads. However, I only discovered this weird quirk by accident. Most likely you'd attach this thing to a BMC that would know to poke the chip to read its sensors periodically. It does explain why the hw designers of the Z30 were complaining that the CPU fans wouldn't speed up even if they blew a hair dryer at the thermal sensor. Apparently they got one of these things to overheat and explode the VRMs. All said, the algorithm that picks the pwm output based on the temperature input seems to work provided that somebody makes the chip read its temperature inputs. <snip; will pick up the fixes> > > +The ADT7470 have a 8-bit ADC and can therefore measure temperatures > > +with 1 degC resolution. > > This "therefore" is incorrect. You can't deduce the physical resolution > from the ADC resolution, you need to additionally know the LSB weight > for that. "might be capable of measuring" ? > Please send an updated patch. Will do. > Out of curiosity: isn't it possible to detect how many thermal sensors > are actually connected, and only create sysfs files for these? Creating > files for sensors which do not exist is rather confusing. I'm not sure. Sensors that aren't present return a temperature of 0, and I have no way of distinguishing a sensor reporting 0 vs. no sensor at all. For the Z30 I know that only temp1 and temp3 are actually hooked up, so I suppose we could special case it and any other machines we come across. --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 05/12] adt7470: Add documentation 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong ` (2 preceding siblings ...) (?) @ 2008-10-09 10:31 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-09 10:31 UTC (permalink / raw) To: lm-sensors Hi Darrick, On Wed, 8 Oct 2008 11:50:08 -0700, Darrick J. Wong wrote: > On Wed, Oct 08, 2008 at 11:46:47AM +0200, Jean Delvare wrote: > > > +sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS > > > +AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip > > > +design, given that many other AD chips take care of this. The driver will not > > > > This is very weird. This pretty much voids the point of an automatic > > fan control mode. If you have to read registers continuously for it to > > work, you can as well control it completely in software. > > Yes. Given the _long_ time it takes to read the external sensors and > the chip being locked during those reads, I could see why they don't > want to do automatic sensor reads. However, I only discovered this > weird quirk by accident. Most likely you'd attach this thing to a BMC > that would know to poke the chip to read its sensors periodically. > > It does explain why the hw designers of the Z30 were complaining that > the CPU fans wouldn't speed up even if they blew a hair dryer at the > thermal sensor. Apparently they got one of these things to overheat and > explode the VRMs. > > All said, the algorithm that picks the pwm output based on the > temperature input seems to work provided that somebody makes the chip > read its temperature inputs. Should we implement a kernel thread / tasklet / whatever it is called these days that would actively read the needed temperature values (and only these) every 5 seconds as soon as automatic fan speed control is enabled? The current implementation seems dangerous to me, as illustrated by the report you quoted above. Maybe this driver should be integrated with the generic thermal zone framework that was added to the kernel a few months ago? I this this framework already handles polling of the chips (to be confirmed.) > > Out of curiosity: isn't it possible to detect how many thermal sensors > > are actually connected, and only create sysfs files for these? Creating > > files for sensors which do not exist is rather confusing. > > I'm not sure. Sensors that aren't present return a temperature of 0, > and I have no way of distinguishing a sensor reporting 0 vs. no sensor > at all. For the Z30 I know that only temp1 and temp3 are actually > hooked up, so I suppose we could special case it and any other machines > we come across. I don't really want to hard-code machine-specific configuration into kernel drivers. I don't think this would scale over time. 0 doesn't seem like a terribly realistic temperature. So, maybe we can have a heuristic that disables all sensors that report 0 when the driver is loaded? To be totally safe, we can then provide a way for the user to forcibly enable temperature sensors (either a module parameter or a sysfs file.) I know we usually don't do that, but OTOH this is the first hardware monitoring chip which daisy-chains external thermal sensors like that. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 05/12] adt7470: Add documentation 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong ` (3 preceding siblings ...) (?) @ 2008-10-09 21:25 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-09 21:25 UTC (permalink / raw) To: lm-sensors On Thu, Oct 09, 2008 at 12:31:17PM +0200, Jean Delvare wrote: > Should we implement a kernel thread / tasklet / whatever it is called > these days that would actively read the needed temperature values (and > only these) every 5 seconds as soon as automatic fan speed control is > enabled? The current implementation seems dangerous to me, as > illustrated by the report you quoted above. That would work, though it'll cause wakeups even if nobody's reading the sensor. However, since one would generally have to run sensors-detect to know that it's there in the first place, I suppose anyone actually loading the module is doing so with the intent to monitor anyway. > > Maybe this driver should be integrated with the generic thermal zone > framework that was added to the kernel a few months ago? I this this > framework already handles polling of the chips (to be confirmed.) Hmm, I'll look into this when I get some more free time. (ha ha...) > 0 doesn't seem like a terribly realistic temperature. So, maybe we can > have a heuristic that disables all sensors that report 0 when the > driver is loaded? To be totally safe, we can then provide a way for the > user to forcibly enable temperature sensors (either a module parameter > or a sysfs file.) That sounds reasonable. > I know we usually don't do that, but OTOH this is the first hardware > monitoring chip which daisy-chains external thermal sensors like that. --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 05/12] adt7470: Add documentation 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong ` (4 preceding siblings ...) (?) @ 2008-10-10 8:25 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-10 8:25 UTC (permalink / raw) To: lm-sensors Hi Darrick, On Thu, 9 Oct 2008 14:25:23 -0700, Darrick J. Wong wrote: > On Thu, Oct 09, 2008 at 12:31:17PM +0200, Jean Delvare wrote: > > > Should we implement a kernel thread / tasklet / whatever it is called > > these days that would actively read the needed temperature values (and > > only these) every 5 seconds as soon as automatic fan speed control is > > enabled? The current implementation seems dangerous to me, as > > illustrated by the report you quoted above. > > That would work, though it'll cause wakeups even if nobody's reading the > sensor. However, since one would generally have to run sensors-detect > to know that it's there in the first place, I suppose anyone actually > loading the module is doing so with the intent to monitor anyway. My proposal is to have such a kernel thread running only when automatic fan speed is enabled. According to the datasheet, this isn't the default, so loading the adt7470 driver alone wouldn't start the thread. The thread would start running only once at least one fan has been switched to automatic mode, and would stop as soon as all fans are switched back to manual mode. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 06/12] adt7470: Load automatically on IntelliStation Z30 via DMI 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:18 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7470.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 656bf3d..ef26014 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -1114,3 +1114,6 @@ MODULE_LICENSE("GPL"); module_init(adt7470_init); module_exit(adt7470_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 06/12] adt7470: Load automatically on @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7470.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 656bf3d..ef26014 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -1114,3 +1114,6 @@ MODULE_LICENSE("GPL"); module_init(adt7470_init); module_exit(adt7470_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 06/12] adt7470: Load automatically on IntelliStation Z30 via DMI 2008-10-07 1:18 ` [lm-sensors] [PATCH 06/12] adt7470: Load automatically on Darrick J. Wong @ 2008-10-08 11:08 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 11:08 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:54 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/adt7470.c | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c > index 656bf3d..ef26014 100644 > --- a/drivers/hwmon/adt7470.c > +++ b/drivers/hwmon/adt7470.c > @@ -1114,3 +1114,6 @@ MODULE_LICENSE("GPL"); > > module_init(adt7470_init); > module_exit(adt7470_exit); > + > +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); > +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); Nack. We have a user-space script to detect hardware monitoring chips and load the corresponding drivers. We aren't going to add 2000+ DMI-based module aliases to handle all motherboards out there in the kernel directly, this simply doesn't scale. And you need some user-space configuration in almost all cases, so even DMI-based module aliases wouldn't give you an automatic setup. On top of that, in cases where detection doesn't work, there are better ways to instantiate specific I2C devices now. -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 06/12] adt7470: Load automatically on @ 2008-10-08 11:08 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 11:08 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:54 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/adt7470.c | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c > index 656bf3d..ef26014 100644 > --- a/drivers/hwmon/adt7470.c > +++ b/drivers/hwmon/adt7470.c > @@ -1114,3 +1114,6 @@ MODULE_LICENSE("GPL"); > > module_init(adt7470_init); > module_exit(adt7470_exit); > + > +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); > +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); Nack. We have a user-space script to detect hardware monitoring chips and load the corresponding drivers. We aren't going to add 2000+ DMI-based module aliases to handle all motherboards out there in the kernel directly, this simply doesn't scale. And you need some user-space configuration in almost all cases, so even DMI-based module aliases wouldn't give you an automatic setup. On top of that, in cases where detection doesn't work, there are better ways to instantiate specific I2C devices now. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 07/12] ics932s401: New driver 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:18 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/ics932s401 | 31 ++ drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 drivers/hwmon/ics932s401.c | 516 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 558 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/ics932s401 b/Documentation/hwmon/ics932s401 new file mode 100644 index 0000000..c2e2c4a --- /dev/null +++ b/Documentation/hwmon/ics932s401 @@ -0,0 +1,31 @@ +Kernel driver ics932s401 +====================== + +Supported chips: + * Analog Devices ICS932S401 + Prefix: 'ics932s401' + Addresses scanned: I2C 0x69 + Datasheet: Publicly available at the Integrated Circuits website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Integrated Circuits ICS932S401 chip family. + +This chip has 4 clock outputs--a base clock for the CPU (which is likely +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB +clock, and a reference clock. The driver reports selected and actual +frequency. If spread spectrum mode is enabled, the driver also reports by what +percent the clock signal is being spread, which should be between 0 and -0.5%. +All frequencies are reported in KHz. + +The ICS932S401 monitors all inputs continuously. The driver will not read +the registers more often than once every other second. + +Special Features +---------------- + +The clocks could be reprogrammed to increase system speed. I will not help you +do this, as you risk damaging your system! diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0341b29..649a32a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -394,6 +394,16 @@ config SENSORS_IBMPEX This driver can also be built as a module. If so, the module will be called ibmpex. +config SENSORS_ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock monitoring chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" select HWMON_VID diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 836b277..487a3c6 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o +obj-$(CONFIG_SENSORS_ICS932S401) += ics932s401.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LM63) += lm63.o diff --git a/drivers/hwmon/ics932s401.c b/drivers/hwmon/ics932s401.c new file mode 100644 index 0000000..492c1d7 --- /dev/null +++ b/drivers/hwmon/ics932s401.c @@ -0,0 +1,516 @@ +/* + * A hwmon driver for the Integrated Circuits ICS932S401 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ics932s401); + +/* ICS932S401 registers */ +#define ICS932S401_REG_CFG2 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_REG_CFG7 0x06 +#define ICS932S401_FS_MASK 0x07 +#define ICS932S401_REG_VENDOR_REV 0x07 +#define ICS932S401_VENDOR 1 +#define ICS932S401_VENDOR_MASK 0x0F +#define ICS932S401_REV 4 +#define ICS932S401_REV_SHIFT 4 +#define ICS932S401_REG_DEVICE 0x09 +#define ICS932S401_DEVICE 11 +#define ICS932S401_REG_CTRL 0x0A +#define ICS932S401_MN_ENABLED 0x80 +#define ICS932S401_CPU_ALT 0x04 +#define ICS932S401_SRC_ALT 0x08 +#define ICS932S401_REG_CPU_M_CTRL 0x0B +#define ICS932S401_M_MASK 0x3F +#define ICS932S401_REG_CPU_N_CTRL 0x0C +#define ICS932S401_REG_CPU_SPREAD1 0x0D +#define ICS932S401_REG_CPU_SPREAD2 0x0E +#define ICS932S401_SPREAD_MASK 0x7FFF +#define ICS932S401_REG_SRC_M_CTRL 0x0F +#define ICS932S401_REG_SRC_N_CTRL 0x10 +#define ICS932S401_REG_SRC_SPREAD1 0x11 +#define ICS932S401_REG_SRC_SPREAD2 0x12 +#define ICS932S401_REG_CPU_DIVISOR 0x13 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_REG_PCISRC_DIVISOR 0x14 +#define ICS932S401_SRC_DIVISOR_MASK 0x0F +#define ICS932S401_PCI_DIVISOR_SHIFT 4 + +/* Base clock is 14.318MHz */ +#define BASE_CLOCK 14318 + +#define NUM_REGS 21 +#define NUM_MIRRORED_REGS 15 + +static int regs_to_copy[NUM_MIRRORED_REGS] = { + ICS932S401_REG_CFG2, + ICS932S401_REG_CFG7, + ICS932S401_REG_VENDOR_REV, + ICS932S401_REG_DEVICE, + ICS932S401_REG_CTRL, + ICS932S401_REG_CPU_M_CTRL, + ICS932S401_REG_CPU_N_CTRL, + ICS932S401_REG_CPU_SPREAD1, + ICS932S401_REG_CPU_SPREAD2, + ICS932S401_REG_SRC_M_CTRL, + ICS932S401_REG_SRC_N_CTRL, + ICS932S401_REG_SRC_SPREAD1, + ICS932S401_REG_SRC_SPREAD2, + ICS932S401_REG_CPU_DIVISOR, + ICS932S401_REG_PCISRC_DIVISOR, +}; + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +struct ics932s401_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + unsigned long sensors_last_updated; /* In jiffies */ + + u8 regs[NUM_REGS]; +}; + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ics932s401_remove(struct i2c_client *client); + +static const struct i2c_device_id ics932s401_id[] = { + { "ics932s401", ics932s401 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ics932s401_id); + +static struct i2c_driver ics932s401_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ics932s401", + }, + .probe = ics932s401_probe, + .remove = ics932s401_remove, + .id_table = ics932s401_id, + .detect = ics932s401_detect, + .address_data = &addr_data, +}; + +static struct ics932s401_data *ics932s401_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ics932s401_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i, temp; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto out; + + /* + * Each register must be read as a word and then right shifted 8 bits. + * Not really sure why this is; setting the "byte count programming" + * register to 1 does not fix this problem. + */ + for (i = 0; i < NUM_MIRRORED_REGS; i++) { + temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); + data->regs[regs_to_copy[i]] = temp >> 8; + } + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_spread_enabled(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) + return sprintf(buf, "1\n"); + + return sprintf(buf, "0\n"); +} + +/* bit to cpu khz map */ +static const int fs_speeds[] = { + 266666, + 133333, + 200000, + 166666, + 333333, + 100000, + 400000, + 0, +}; + +/* clock divisor map */ +static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, + 24, 40, 120}; + +/* Calculate CPU frequency from the M/N registers. */ +static int calculate_cpu_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_CPU_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> + ICS932S401_CPU_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_cpu_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_cpu_freq(data)); +} + +static ssize_t show_cpu_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_cpu_freq(data); + else { + /* Freq is neatly wrapped up for us */ + int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { + switch (freq) { + case 166666: + freq = 160000; + break; + case 333333: + freq = 320000; + break; + } + } + } + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate SRC frequency from the M/N registers. */ +static int calculate_src_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & + ICS932S401_SRC_DIVISOR_MASK]; + + return freq; +} + +static ssize_t show_src_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_src_freq(data)); +} + +static ssize_t show_src_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_src_freq(data); + else + /* Freq is neatly wrapped up for us */ + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && + data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) + freq = 96000; + else + freq = 100000; + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate PCI frequency from the SRC M/N registers. */ +static int calculate_pci_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> + ICS932S401_PCI_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_pci_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_pci_freq(data)); +} + +static ssize_t show_pci_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_pci_freq(data); + else + freq = 33333; + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%d\n", attr->index); +} + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct ics932s401_data *data = ics932s401_update_device(dev); + int reg; + unsigned long val; + + if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) + return sprintf(buf, "0%%\n"); + + /* 1 = src, 0 = cpu */ + if (attr->index) + reg = ICS932S401_REG_SRC_SPREAD1; + else + reg = ICS932S401_REG_CPU_SPREAD1; + + val = data->regs[reg] | (data->regs[reg + 1] << 8); + val &= ICS932S401_SPREAD_MASK; + + /* Scale 0..2^14 to -0.5. */ + val = 500000 * val / 16384; + return sprintf(buf, "-0.%lu%%\n", val); +} + +static SENSOR_DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, + NULL, 0); +static SENSOR_DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, + NULL, 0); +static SENSOR_DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL, 0); +static SENSOR_DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, + NULL, 0); +static SENSOR_DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL, 0); +static SENSOR_DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, + NULL, 0); +static SENSOR_DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL, 0); +static SENSOR_DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL, 48000); +static SENSOR_DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL, BASE_CLOCK); +static SENSOR_DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL, 0); +static SENSOR_DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL, 1); + +static struct attribute *ics932s401_attr[] = +{ + &sensor_dev_attr_spread_enabled.dev_attr.attr, + &sensor_dev_attr_cpu_clock_selection.dev_attr.attr, + &sensor_dev_attr_cpu_clock.dev_attr.attr, + &sensor_dev_attr_src_clock_selection.dev_attr.attr, + &sensor_dev_attr_src_clock.dev_attr.attr, + &sensor_dev_attr_pci_clock_selection.dev_attr.attr, + &sensor_dev_attr_pci_clock.dev_attr.attr, + &sensor_dev_attr_usb_clock.dev_attr.attr, + &sensor_dev_attr_ref_clock.dev_attr.attr, + &sensor_dev_attr_cpu_spread.dev_attr.attr, + &sensor_dev_attr_src_spread.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_word_data(client, + ICS932S401_REG_VENDOR_REV); + vendor >>= 8; + revision = vendor >> ICS932S401_REV_SHIFT; + vendor &= ICS932S401_VENDOR_MASK; + if (vendor != ICS932S401_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_word_data(client, + ICS932S401_REG_DEVICE); + device >>= 8; + if (device != ICS932S401_DEVICE) + return -ENODEV; + + if (revision != ICS932S401_REV) + dev_info(&adapter->dev, "Unknown revision %d\n", + revision); + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + + return 0; +} + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ics932s401_data *data; + int err; + + data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = ics932s401_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int ics932s401_remove(struct i2c_client *client) +{ + struct ics932s401_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init ics932s401_init(void) +{ + return i2c_add_driver(&ics932s401_driver); +} + +static void __exit ics932s401_exit(void) +{ + i2c_del_driver(&ics932s401_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ICS932S401 driver"); +MODULE_LICENSE("GPL"); + +module_init(ics932s401_init); +module_exit(ics932s401_exit); + +/* IBM IntelliStation Z30 */ +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); + +/* IBM x3650/x3550 */ +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 07/12] ics932s401: New driver @ 2008-10-07 1:18 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:18 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- Documentation/hwmon/ics932s401 | 31 ++ drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 drivers/hwmon/ics932s401.c | 516 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 558 insertions(+), 0 deletions(-) diff --git a/Documentation/hwmon/ics932s401 b/Documentation/hwmon/ics932s401 new file mode 100644 index 0000000..c2e2c4a --- /dev/null +++ b/Documentation/hwmon/ics932s401 @@ -0,0 +1,31 @@ +Kernel driver ics932s401 +=========== + +Supported chips: + * Analog Devices ICS932S401 + Prefix: 'ics932s401' + Addresses scanned: I2C 0x69 + Datasheet: Publicly available at the Integrated Circuits website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Integrated Circuits ICS932S401 chip family. + +This chip has 4 clock outputs--a base clock for the CPU (which is likely +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB +clock, and a reference clock. The driver reports selected and actual +frequency. If spread spectrum mode is enabled, the driver also reports by what +percent the clock signal is being spread, which should be between 0 and -0.5%. +All frequencies are reported in KHz. + +The ICS932S401 monitors all inputs continuously. The driver will not read +the registers more often than once every other second. + +Special Features +---------------- + +The clocks could be reprogrammed to increase system speed. I will not help you +do this, as you risk damaging your system! diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0341b29..649a32a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -394,6 +394,16 @@ config SENSORS_IBMPEX This driver can also be built as a module. If so, the module will be called ibmpex. +config SENSORS_ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock monitoring chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" select HWMON_VID diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 836b277..487a3c6 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o +obj-$(CONFIG_SENSORS_ICS932S401) += ics932s401.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LM63) += lm63.o diff --git a/drivers/hwmon/ics932s401.c b/drivers/hwmon/ics932s401.c new file mode 100644 index 0000000..492c1d7 --- /dev/null +++ b/drivers/hwmon/ics932s401.c @@ -0,0 +1,516 @@ +/* + * A hwmon driver for the Integrated Circuits ICS932S401 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ics932s401); + +/* ICS932S401 registers */ +#define ICS932S401_REG_CFG2 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_REG_CFG7 0x06 +#define ICS932S401_FS_MASK 0x07 +#define ICS932S401_REG_VENDOR_REV 0x07 +#define ICS932S401_VENDOR 1 +#define ICS932S401_VENDOR_MASK 0x0F +#define ICS932S401_REV 4 +#define ICS932S401_REV_SHIFT 4 +#define ICS932S401_REG_DEVICE 0x09 +#define ICS932S401_DEVICE 11 +#define ICS932S401_REG_CTRL 0x0A +#define ICS932S401_MN_ENABLED 0x80 +#define ICS932S401_CPU_ALT 0x04 +#define ICS932S401_SRC_ALT 0x08 +#define ICS932S401_REG_CPU_M_CTRL 0x0B +#define ICS932S401_M_MASK 0x3F +#define ICS932S401_REG_CPU_N_CTRL 0x0C +#define ICS932S401_REG_CPU_SPREAD1 0x0D +#define ICS932S401_REG_CPU_SPREAD2 0x0E +#define ICS932S401_SPREAD_MASK 0x7FFF +#define ICS932S401_REG_SRC_M_CTRL 0x0F +#define ICS932S401_REG_SRC_N_CTRL 0x10 +#define ICS932S401_REG_SRC_SPREAD1 0x11 +#define ICS932S401_REG_SRC_SPREAD2 0x12 +#define ICS932S401_REG_CPU_DIVISOR 0x13 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_REG_PCISRC_DIVISOR 0x14 +#define ICS932S401_SRC_DIVISOR_MASK 0x0F +#define ICS932S401_PCI_DIVISOR_SHIFT 4 + +/* Base clock is 14.318MHz */ +#define BASE_CLOCK 14318 + +#define NUM_REGS 21 +#define NUM_MIRRORED_REGS 15 + +static int regs_to_copy[NUM_MIRRORED_REGS] = { + ICS932S401_REG_CFG2, + ICS932S401_REG_CFG7, + ICS932S401_REG_VENDOR_REV, + ICS932S401_REG_DEVICE, + ICS932S401_REG_CTRL, + ICS932S401_REG_CPU_M_CTRL, + ICS932S401_REG_CPU_N_CTRL, + ICS932S401_REG_CPU_SPREAD1, + ICS932S401_REG_CPU_SPREAD2, + ICS932S401_REG_SRC_M_CTRL, + ICS932S401_REG_SRC_N_CTRL, + ICS932S401_REG_SRC_SPREAD1, + ICS932S401_REG_SRC_SPREAD2, + ICS932S401_REG_CPU_DIVISOR, + ICS932S401_REG_PCISRC_DIVISOR, +}; + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +struct ics932s401_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + unsigned long sensors_last_updated; /* In jiffies */ + + u8 regs[NUM_REGS]; +}; + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ics932s401_remove(struct i2c_client *client); + +static const struct i2c_device_id ics932s401_id[] = { + { "ics932s401", ics932s401 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ics932s401_id); + +static struct i2c_driver ics932s401_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ics932s401", + }, + .probe = ics932s401_probe, + .remove = ics932s401_remove, + .id_table = ics932s401_id, + .detect = ics932s401_detect, + .address_data = &addr_data, +}; + +static struct ics932s401_data *ics932s401_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ics932s401_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i, temp; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto out; + + /* + * Each register must be read as a word and then right shifted 8 bits. + * Not really sure why this is; setting the "byte count programming" + * register to 1 does not fix this problem. + */ + for (i = 0; i < NUM_MIRRORED_REGS; i++) { + temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); + data->regs[regs_to_copy[i]] = temp >> 8; + } + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_spread_enabled(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) + return sprintf(buf, "1\n"); + + return sprintf(buf, "0\n"); +} + +/* bit to cpu khz map */ +static const int fs_speeds[] = { + 266666, + 133333, + 200000, + 166666, + 333333, + 100000, + 400000, + 0, +}; + +/* clock divisor map */ +static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, + 24, 40, 120}; + +/* Calculate CPU frequency from the M/N registers. */ +static int calculate_cpu_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_CPU_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> + ICS932S401_CPU_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_cpu_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_cpu_freq(data)); +} + +static ssize_t show_cpu_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_cpu_freq(data); + else { + /* Freq is neatly wrapped up for us */ + int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { + switch (freq) { + case 166666: + freq = 160000; + break; + case 333333: + freq = 320000; + break; + } + } + } + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate SRC frequency from the M/N registers. */ +static int calculate_src_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & + ICS932S401_SRC_DIVISOR_MASK]; + + return freq; +} + +static ssize_t show_src_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_src_freq(data)); +} + +static ssize_t show_src_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_src_freq(data); + else + /* Freq is neatly wrapped up for us */ + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && + data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) + freq = 96000; + else + freq = 100000; + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate PCI frequency from the SRC M/N registers. */ +static int calculate_pci_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> + ICS932S401_PCI_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_pci_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_pci_freq(data)); +} + +static ssize_t show_pci_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_pci_freq(data); + else + freq = 33333; + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%d\n", attr->index); +} + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct ics932s401_data *data = ics932s401_update_device(dev); + int reg; + unsigned long val; + + if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) + return sprintf(buf, "0%%\n"); + + /* 1 = src, 0 = cpu */ + if (attr->index) + reg = ICS932S401_REG_SRC_SPREAD1; + else + reg = ICS932S401_REG_CPU_SPREAD1; + + val = data->regs[reg] | (data->regs[reg + 1] << 8); + val &= ICS932S401_SPREAD_MASK; + + /* Scale 0..2^14 to -0.5. */ + val = 500000 * val / 16384; + return sprintf(buf, "-0.%lu%%\n", val); +} + +static SENSOR_DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, + NULL, 0); +static SENSOR_DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, + NULL, 0); +static SENSOR_DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL, 0); +static SENSOR_DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, + NULL, 0); +static SENSOR_DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL, 0); +static SENSOR_DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, + NULL, 0); +static SENSOR_DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL, 0); +static SENSOR_DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL, 48000); +static SENSOR_DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL, BASE_CLOCK); +static SENSOR_DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL, 0); +static SENSOR_DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL, 1); + +static struct attribute *ics932s401_attr[] +{ + &sensor_dev_attr_spread_enabled.dev_attr.attr, + &sensor_dev_attr_cpu_clock_selection.dev_attr.attr, + &sensor_dev_attr_cpu_clock.dev_attr.attr, + &sensor_dev_attr_src_clock_selection.dev_attr.attr, + &sensor_dev_attr_src_clock.dev_attr.attr, + &sensor_dev_attr_pci_clock_selection.dev_attr.attr, + &sensor_dev_attr_pci_clock.dev_attr.attr, + &sensor_dev_attr_usb_clock.dev_attr.attr, + &sensor_dev_attr_ref_clock.dev_attr.attr, + &sensor_dev_attr_cpu_spread.dev_attr.attr, + &sensor_dev_attr_src_spread.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_word_data(client, + ICS932S401_REG_VENDOR_REV); + vendor >>= 8; + revision = vendor >> ICS932S401_REV_SHIFT; + vendor &= ICS932S401_VENDOR_MASK; + if (vendor != ICS932S401_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_word_data(client, + ICS932S401_REG_DEVICE); + device >>= 8; + if (device != ICS932S401_DEVICE) + return -ENODEV; + + if (revision != ICS932S401_REV) + dev_info(&adapter->dev, "Unknown revision %d\n", + revision); + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + + return 0; +} + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ics932s401_data *data; + int err; + + data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = ics932s401_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int ics932s401_remove(struct i2c_client *client) +{ + struct ics932s401_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init ics932s401_init(void) +{ + return i2c_add_driver(&ics932s401_driver); +} + +static void __exit ics932s401_exit(void) +{ + i2c_del_driver(&ics932s401_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ICS932S401 driver"); +MODULE_LICENSE("GPL"); + +module_init(ics932s401_init); +module_exit(ics932s401_exit); + +/* IBM IntelliStation Z30 */ +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); + +/* IBM x3650/x3550 */ +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 07/12] ics932s401: New driver 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-08 11:09 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 11:09 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:59 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/ics932s401 | 31 ++ > drivers/hwmon/Kconfig | 10 + > drivers/hwmon/Makefile | 1 > drivers/hwmon/ics932s401.c | 516 ++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 558 insertions(+), 0 deletions(-) > > diff --git a/Documentation/hwmon/ics932s401 b/Documentation/hwmon/ics932s401 > new file mode 100644 > index 0000000..c2e2c4a > --- /dev/null > +++ b/Documentation/hwmon/ics932s401 > @@ -0,0 +1,31 @@ > +Kernel driver ics932s401 > +====================== > + > +Supported chips: > + * Analog Devices ICS932S401 > + Prefix: 'ics932s401' > + Addresses scanned: I2C 0x69 > + Datasheet: Publicly available at the Integrated Circuits website > + > +Author: Darrick J. Wong > + > +Description > +----------- > + > +This driver implements support for the Integrated Circuits ICS932S401 chip family. > + > +This chip has 4 clock outputs--a base clock for the CPU (which is likely > +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB > +clock, and a reference clock. The driver reports selected and actual > +frequency. If spread spectrum mode is enabled, the driver also reports by what > +percent the clock signal is being spread, which should be between 0 and -0.5%. > +All frequencies are reported in KHz. > + > +The ICS932S401 monitors all inputs continuously. The driver will not read > +the registers more often than once every other second. I fail to see how this has anything to do with hardware monitoring. -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 07/12] ics932s401: New driver @ 2008-10-08 11:09 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 11:09 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:18:59 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > Documentation/hwmon/ics932s401 | 31 ++ > drivers/hwmon/Kconfig | 10 + > drivers/hwmon/Makefile | 1 > drivers/hwmon/ics932s401.c | 516 ++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 558 insertions(+), 0 deletions(-) > > diff --git a/Documentation/hwmon/ics932s401 b/Documentation/hwmon/ics932s401 > new file mode 100644 > index 0000000..c2e2c4a > --- /dev/null > +++ b/Documentation/hwmon/ics932s401 > @@ -0,0 +1,31 @@ > +Kernel driver ics932s401 > +=========== > + > +Supported chips: > + * Analog Devices ICS932S401 > + Prefix: 'ics932s401' > + Addresses scanned: I2C 0x69 > + Datasheet: Publicly available at the Integrated Circuits website > + > +Author: Darrick J. Wong > + > +Description > +----------- > + > +This driver implements support for the Integrated Circuits ICS932S401 chip family. > + > +This chip has 4 clock outputs--a base clock for the CPU (which is likely > +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB > +clock, and a reference clock. The driver reports selected and actual > +frequency. If spread spectrum mode is enabled, the driver also reports by what > +percent the clock signal is being spread, which should be between 0 and -0.5%. > +All frequencies are reported in KHz. > + > +The ICS932S401 monitors all inputs continuously. The driver will not read > +the registers more often than once every other second. I fail to see how this has anything to do with hardware monitoring. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 07/12] ics932s401: New driver 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong (?) (?) @ 2008-10-08 18:26 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-08 18:26 UTC (permalink / raw) To: lm-sensors On Wed, Oct 08, 2008 at 01:09:59PM +0200, Jean Delvare wrote: > > +This chip has 4 clock outputs--a base clock for the CPU (which is likely > > +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB > > +clock, and a reference clock. The driver reports selected and actual > > +frequency. If spread spectrum mode is enabled, the driver also reports by what > > +percent the clock signal is being spread, which should be between 0 and -0.5%. > > +All frequencies are reported in KHz. > > + > > +The ICS932S401 monitors all inputs continuously. The driver will not read > > +the registers more often than once every other second. > > I fail to see how this has anything to do with hardware monitoring. This driver enables users to monitor the clock generator chips on the motherboard. Not a traditional hwmon chip in the temp/volt/fan sense, I agree, but it's been useful for me when I want to confirm that clock rates are what they're supposed to be. It's also helpful to know whether or not spread spectrum is enabled if the CPU clock is a few tenths of a % below what I think it should be. (Yes you can over/underclock by writing to this chip, but someone else can do that; I don't recommend it.) --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 07/12] ics932s401: New driver 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong ` (2 preceding siblings ...) (?) @ 2008-10-09 11:37 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-09 11:37 UTC (permalink / raw) To: lm-sensors On Wed, 8 Oct 2008 11:26:37 -0700, Darrick J. Wong wrote: > On Wed, Oct 08, 2008 at 01:09:59PM +0200, Jean Delvare wrote: > > > +This chip has 4 clock outputs--a base clock for the CPU (which is likely > > > +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB > > > +clock, and a reference clock. The driver reports selected and actual > > > +frequency. If spread spectrum mode is enabled, the driver also reports by what > > > +percent the clock signal is being spread, which should be between 0 and -0.5%. > > > +All frequencies are reported in KHz. > > > + > > > +The ICS932S401 monitors all inputs continuously. The driver will not read > > > +the registers more often than once every other second. > > > > I fail to see how this has anything to do with hardware monitoring. > > This driver enables users to monitor the clock generator chips on the > motherboard. Not a traditional hwmon chip in the temp/volt/fan sense, I > agree, but it's been useful for me when I want to confirm that clock > rates are what they're supposed to be. It's also helpful to know > whether or not spread spectrum is enabled if the CPU clock is a few > tenths of a % below what I think it should be. > > (Yes you can over/underclock by writing to this chip, but someone else > can do that; I don't recommend it.) I'm not arguing the usefulness of the driver. I'm just saying that it doesn't belong to drivers/hwmon and shouldn't call hwmon_device_register(). -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 08/12] i5k_amb: Load automatically on all 5000/5400 chipsets 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:19 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/i5k_amb.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index 2ede938..bf153ae 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -605,3 +605,6 @@ MODULE_LICENSE("GPL"); module_init(i5k_amb_init); module_exit(i5k_amb_exit); + +MODULE_ALIAS("pci:v00008086d000025F0sv*sd*bc*sc*i*"); +MODULE_ALIAS("pci:v00008086d00004030sv*sd*bc*sc*i*"); ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all @ 2008-10-07 1:19 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/i5k_amb.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index 2ede938..bf153ae 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -605,3 +605,6 @@ MODULE_LICENSE("GPL"); module_init(i5k_amb_init); module_exit(i5k_amb_exit); + +MODULE_ALIAS("pci:v00008086d000025F0sv*sd*bc*sc*i*"); +MODULE_ALIAS("pci:v00008086d00004030sv*sd*bc*sc*i*"); _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all 5000/5400 chipsets 2008-10-07 1:19 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Darrick J. Wong @ 2008-10-08 11:13 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 11:13 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:19:04 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/i5k_amb.c | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c > index 2ede938..bf153ae 100644 > --- a/drivers/hwmon/i5k_amb.c > +++ b/drivers/hwmon/i5k_amb.c > @@ -605,3 +605,6 @@ MODULE_LICENSE("GPL"); > > module_init(i5k_amb_init); > module_exit(i5k_amb_exit); > + > +MODULE_ALIAS("pci:v00008086d000025F0sv*sd*bc*sc*i*"); > +MODULE_ALIAS("pci:v00008086d00004030sv*sd*bc*sc*i*"); This looks wrong to me. If these PCI devices provide the feature this driver supports, then why is this a platform driver and not a PCI driver? You would get the right module aliases for free. -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all @ 2008-10-08 11:13 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 11:13 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:19:04 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/i5k_amb.c | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c > index 2ede938..bf153ae 100644 > --- a/drivers/hwmon/i5k_amb.c > +++ b/drivers/hwmon/i5k_amb.c > @@ -605,3 +605,6 @@ MODULE_LICENSE("GPL"); > > module_init(i5k_amb_init); > module_exit(i5k_amb_exit); > + > +MODULE_ALIAS("pci:v00008086d000025F0sv*sd*bc*sc*i*"); > +MODULE_ALIAS("pci:v00008086d00004030sv*sd*bc*sc*i*"); This looks wrong to me. If these PCI devices provide the feature this driver supports, then why is this a platform driver and not a PCI driver? You would get the right module aliases for free. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on 2008-10-07 1:19 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Darrick J. Wong (?) (?) @ 2008-10-08 18:19 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-08 18:19 UTC (permalink / raw) To: lm-sensors On Wed, Oct 08, 2008 at 01:13:02PM +0200, Jean Delvare wrote: > > +MODULE_ALIAS("pci:v00008086d000025F0sv*sd*bc*sc*i*"); > > +MODULE_ALIAS("pci:v00008086d00004030sv*sd*bc*sc*i*"); > > This looks wrong to me. If these PCI devices provide the feature this > driver supports, then why is this a platform driver and not a PCI > driver? You would get the right module aliases for free. The AMB registers live at an arbitrary location in memory. That location is given in those PCI devices' config data, but the memory address is not part of the device's memory. The driver only attaches to the PCI device long enough to read the location, and then it doesn't need PCI or the device anymore. --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all 2008-10-07 1:19 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Darrick J. Wong ` (2 preceding siblings ...) (?) @ 2008-10-09 11:43 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-09 11:43 UTC (permalink / raw) To: lm-sensors Hi Darrick, On Wed, 8 Oct 2008 11:19:42 -0700, Darrick J. Wong wrote: > On Wed, Oct 08, 2008 at 01:13:02PM +0200, Jean Delvare wrote: > > > > +MODULE_ALIAS("pci:v00008086d000025F0sv*sd*bc*sc*i*"); > > > +MODULE_ALIAS("pci:v00008086d00004030sv*sd*bc*sc*i*"); > > > > This looks wrong to me. If these PCI devices provide the feature this > > driver supports, then why is this a platform driver and not a PCI > > driver? You would get the right module aliases for free. > > The AMB registers live at an arbitrary location in memory. That > location is given in those PCI devices' config data, but the memory > address is not part of the device's memory. The driver only attaches to > the PCI device long enough to read the location, and then it doesn't > need PCI or the device anymore. Well, this is the case of several SMBus controller and hardware monitoring device drivers: i2c-viapro, i2c-sis5595, via686a, vt8231, sis5595... These drivers are PCI drivers, they read PCI registers to find out the base I/O address of the function they support, and then fail their probe. There are many other PCI SMBus controller drivers which succeed their probe but technically don't really need to. I'm not sure why the AMB device would be any different. How comes that the PCI devices know the AMB memory address if they aren't related? If the PCI devices do not own this memory mapping, who does? -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on 2008-10-07 1:19 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Darrick J. Wong ` (3 preceding siblings ...) (?) @ 2008-10-10 17:54 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-10 17:54 UTC (permalink / raw) To: lm-sensors On Thu, Oct 09, 2008 at 01:43:53PM +0200, Jean Delvare wrote: > sure why the AMB device would be any different. How comes that the PCI > devices know the AMB memory address if they aren't related? If the PCI > devices do not own this memory mapping, who does? On _most_ of my systems it's listed in the ACPI DSDT as one of the "system board resources" (SBD1). Unfortunately, this SBD1 object lists a bunch of memory regions and I/O ports, without any indication of what each of those regions is for, other than "not for general OS use". It's a little confusing here--the PCI config register has ultimate control over where the region lives, but ACPI claims it as part of its own system board "do not use" map. I suppose it wouldn't be hard to do this with a pci_device_id and MODULE_DEVICE_TABLE instead of a direct MODULE_ALIAS. But since I only need the PCI device for a brief moment I'm trying to avoid bloating the driver with all the pci_driver support code. --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all 2008-10-07 1:19 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Darrick J. Wong ` (4 preceding siblings ...) (?) @ 2008-10-15 8:48 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-15 8:48 UTC (permalink / raw) To: lm-sensors Hi Darrick, Sorry for the late answer. On Fri, 10 Oct 2008 10:54:15 -0700, Darrick J. Wong wrote: > On Thu, Oct 09, 2008 at 01:43:53PM +0200, Jean Delvare wrote: > > > sure why the AMB device would be any different. How comes that the PCI > > devices know the AMB memory address if they aren't related? If the PCI > > devices do not own this memory mapping, who does? > > On _most_ of my systems it's listed in the ACPI DSDT as one of the > "system board resources" (SBD1). Unfortunately, this SBD1 object lists > a bunch of memory regions and I/O ports, without any indication of what > each of those regions is for, other than "not for general OS use". It's > a little confusing here--the PCI config register has ultimate control > over where the region lives, but ACPI claims it as part of its own > system board "do not use" map. ACPI being weird and inconsistent? Wow, that's totally news to me! ;) > I suppose it wouldn't be hard to do this with a pci_device_id and > MODULE_DEVICE_TABLE instead of a direct MODULE_ALIAS. But since I only > need the PCI device for a brief moment I'm trying to avoid bloating the > driver with all the pci_driver support code. I'm not sure why a pci driver would be more code than a platform driver looping over pci_get_device(). In fact I suspect it would be less code. And if we are going to auto-load the driver based on PCI devices, then it makes a lot of sense for i5k_amb to be a pci driver. Back to the initial object of the patch: please do not hard-code the PCI device aliases. No other driver does this. Instead, please define the IDs in a proper pci_device_id null-terminated array and call MODULE_DEVICE_TABLE(pci, x) on it. This is easier to read and not subject to break if the format of the pci aliases ever changes. Thanks, -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 09/12] ibmpex: Automatically load on IBM systems via DMI 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:19 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/ibmpex.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c index 4e9b19c..6e3a2c4 100644 --- a/drivers/hwmon/ibmpex.c +++ b/drivers/hwmon/ibmpex.c @@ -608,3 +608,9 @@ MODULE_LICENSE("GPL"); module_init(ibmpex_init); module_exit(ibmpex_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM @ 2008-10-07 1:19 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/ibmpex.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c index 4e9b19c..6e3a2c4 100644 --- a/drivers/hwmon/ibmpex.c +++ b/drivers/hwmon/ibmpex.c @@ -608,3 +608,9 @@ MODULE_LICENSE("GPL"); module_init(ibmpex_init); module_exit(ibmpex_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM systems via DMI 2008-10-07 1:19 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Darrick J. Wong @ 2008-10-08 12:01 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 12:01 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:19:09 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/ibmpex.c | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c > index 4e9b19c..6e3a2c4 100644 > --- a/drivers/hwmon/ibmpex.c > +++ b/drivers/hwmon/ibmpex.c > @@ -608,3 +608,9 @@ MODULE_LICENSE("GPL"); > > module_init(ibmpex_init); > module_exit(ibmpex_exit); > + > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); Is there no way to have an alias at the IPMI level? That is, alias on the device itself rather than the systems it is in? This would avoid the foreseeable requirement to add entries every time new machines are released. But if there is no such way then I am fine applying this patch (except that I'd sort the entries). I also suspect that the last "*" should actually be ":*"? -- Jean Delvare ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM @ 2008-10-08 12:01 ` Jean Delvare 0 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-08 12:01 UTC (permalink / raw) To: Darrick J. Wong; +Cc: Andrew Morton, linux-kernel, lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:19:09 -0700, Darrick J. Wong wrote: > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/ibmpex.c | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c > index 4e9b19c..6e3a2c4 100644 > --- a/drivers/hwmon/ibmpex.c > +++ b/drivers/hwmon/ibmpex.c > @@ -608,3 +608,9 @@ MODULE_LICENSE("GPL"); > > module_init(ibmpex_init); > module_exit(ibmpex_exit); > + > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); Is there no way to have an alias at the IPMI level? That is, alias on the device itself rather than the systems it is in? This would avoid the foreseeable requirement to add entries every time new machines are released. But if there is no such way then I am fine applying this patch (except that I'd sort the entries). I also suspect that the last "*" should actually be ":*"? -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM systems via DMI 2008-10-08 12:01 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Jean Delvare @ 2008-10-08 14:33 ` Christian Krafft -1 siblings, 0 replies; 60+ messages in thread From: Christian Krafft @ 2008-10-08 14:33 UTC (permalink / raw) To: Jean Delvare; +Cc: Darrick J. Wong, Andrew Morton, linux-kernel, lm-sensors Hi, On Wed, 8 Oct 2008 14:01:58 +0200 Jean Delvare <khali@linux-fr.org> wrote: > Hi Darrick, > > On Mon, 06 Oct 2008 18:19:09 -0700, Darrick J. Wong wrote: > > > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > > --- > > > > drivers/hwmon/ibmpex.c | 6 ++++++ > > 1 files changed, 6 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c > > index 4e9b19c..6e3a2c4 100644 > > --- a/drivers/hwmon/ibmpex.c > > +++ b/drivers/hwmon/ibmpex.c > > @@ -608,3 +608,9 @@ MODULE_LICENSE("GPL"); > > > > module_init(ibmpex_init); > > module_exit(ibmpex_exit); > > + > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); > > Is there no way to have an alias at the IPMI level? That is, alias on > the device itself rather than the systems it is in? This would avoid the > foreseeable requirement to add entries every time new machines are > released. First foreseeable requirement would come from my side. IBM's cell blades QS21/QS22 also support AEM/PEX. On Power we don't have DMI information, but a slof device tree. One could also add the open firmware path to the ipmi device. But to avoid autoloading on other slof based machines with ipmi one would have to add compatible attributes for each machine. So autoloading based on available ipmi sensors would be much better. > > But if there is no such way then I am fine applying this patch (except > that I'd sort the entries). I also suspect that the last "*" should > actually be ":*"? > -- Mit freundlichen Gruessen, kind regards, Christian Krafft Linux Kernel Development IBM Systems & Technology Group Phone: +49-07031-16-2032 IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Martin Jetter Geschaetsfuehung: Herbert Kircher Sitz der Gesellschaft: Boelingen Registergericht: Amtsgericht Stuttgart, HRB 243294 ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM @ 2008-10-08 14:33 ` Christian Krafft 0 siblings, 0 replies; 60+ messages in thread From: Christian Krafft @ 2008-10-08 14:33 UTC (permalink / raw) To: Jean Delvare; +Cc: Darrick J. Wong, Andrew Morton, linux-kernel, lm-sensors Hi, On Wed, 8 Oct 2008 14:01:58 +0200 Jean Delvare <khali@linux-fr.org> wrote: > Hi Darrick, > > On Mon, 06 Oct 2008 18:19:09 -0700, Darrick J. Wong wrote: > > > > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > > --- > > > > drivers/hwmon/ibmpex.c | 6 ++++++ > > 1 files changed, 6 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c > > index 4e9b19c..6e3a2c4 100644 > > --- a/drivers/hwmon/ibmpex.c > > +++ b/drivers/hwmon/ibmpex.c > > @@ -608,3 +608,9 @@ MODULE_LICENSE("GPL"); > > > > module_init(ibmpex_init); > > module_exit(ibmpex_exit); > > + > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); > > +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); > > Is there no way to have an alias at the IPMI level? That is, alias on > the device itself rather than the systems it is in? This would avoid the > foreseeable requirement to add entries every time new machines are > released. First foreseeable requirement would come from my side. IBM's cell blades QS21/QS22 also support AEM/PEX. On Power we don't have DMI information, but a slof device tree. One could also add the open firmware path to the ipmi device. But to avoid autoloading on other slof based machines with ipmi one would have to add compatible attributes for each machine. So autoloading based on available ipmi sensors would be much better. > > But if there is no such way then I am fine applying this patch (except > that I'd sort the entries). I also suspect that the last "*" should > actually be ":*"? > -- Mit freundlichen Gruessen, kind regards, Christian Krafft Linux Kernel Development IBM Systems & Technology Group Phone: +49-07031-16-2032 IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Martin Jetter Geschaetsfuehung: Herbert Kircher Sitz der Gesellschaft: Boelingen Registergericht: Amtsgericht Stuttgart, HRB 243294 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on 2008-10-07 1:19 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Darrick J. Wong (?) (?) @ 2008-10-08 18:09 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-08 18:09 UTC (permalink / raw) To: lm-sensors [dropping linux-scsi from cc] On Wed, Oct 08, 2008 at 02:01:58PM +0200, Jean Delvare wrote: > Is there no way to have an alias at the IPMI level? That is, alias on > the device itself rather than the systems it is in? This would avoid the > foreseeable requirement to add entries every time new machines are > released. I'm not sure how one would construct this--the only way to find out if there's a PEX/AEM device is to send raw IPMI commands and see if we get back the correct set of bytes. Otherwise, the BMC answering IPMI requests looks exactly the same as a non-AEM/PEX BMC. > But if there is no such way then I am fine applying this patch (except > that I'd sort the entries). I also suspect that the last "*" should > actually be ":*"? Nope. The pn string actually contains extended model number data: IBMSystemx3650-[7979AC1]- ^^^^----- There can be several MNs, which change across speed bump/warranty options. ^^^-- This depends on the option package you specify when you buy the machine. So I stop looking at the family number (3650). I suppose it would be wise to include the dash just in case we ever go to 5 digit family numbers ("x35351"). --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM 2008-10-07 1:19 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Darrick J. Wong ` (2 preceding siblings ...) (?) @ 2008-10-09 11:47 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-09 11:47 UTC (permalink / raw) To: lm-sensors On Wed, 8 Oct 2008 11:09:53 -0700, Darrick J. Wong wrote: > [dropping linux-scsi from cc] Yeah, someday you'll have to tell me why you included it in the first place ;) > On Wed, Oct 08, 2008 at 02:01:58PM +0200, Jean Delvare wrote: > > Is there no way to have an alias at the IPMI level? That is, alias on > > the device itself rather than the systems it is in? This would avoid the > > foreseeable requirement to add entries every time new machines are > > released. > > I'm not sure how one would construct this--the only way to find out if > there's a PEX/AEM device is to send raw IPMI commands and see if we get > back the correct set of bytes. Otherwise, the BMC answering IPMI > requests looks exactly the same as a non-AEM/PEX BMC. OK. > > But if there is no such way then I am fine applying this patch (except > > that I'd sort the entries). I also suspect that the last "*" should > > actually be ":*"? > > Nope. The pn string actually contains extended model number data: > > IBMSystemx3650-[7979AC1]- > ^^^^----- There can be several MNs, which change across > speed bump/warranty options. > ^^^-- This depends on the option package you specify > when you buy the machine. > > So I stop looking at the family number (3650). I suppose it would be > wise to include the dash just in case we ever go to 5 digit family > numbers ("x35351"). OK, I'll add the dash then. What about this one: "dmi:bvnIBM:*:pnIBM3850M2/x3950M2*" Should I add a trailing dash as well? -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on 2008-10-07 1:19 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Darrick J. Wong ` (3 preceding siblings ...) (?) @ 2008-10-09 17:21 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-09 17:21 UTC (permalink / raw) To: lm-sensors On Thu, Oct 09, 2008 at 01:47:02PM +0200, Jean Delvare wrote: > Yeah, someday you'll have to tell me why you included it in the first > place ;) Fubar'd address book. :( > OK, I'll add the dash then. What about this one: > > "dmi:bvnIBM:*:pnIBM3850M2/x3950M2*" > > Should I add a trailing dash as well? Yes. --D _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 10/12] ibmaem: Automatically load on IBM systems via DMI 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:19 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/ibmaem.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 0f70dc2..980145a 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -1118,3 +1118,10 @@ MODULE_LICENSE("GPL"); module_init(aem_init); module_exit(aem_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBM3850M2/x3950M2*"); ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 10/12] ibmaem: Automatically load on IBM @ 2008-10-07 1:19 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/ibmaem.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 0f70dc2..980145a 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -1118,3 +1118,10 @@ MODULE_LICENSE("GPL"); module_init(aem_init); module_exit(aem_exit); + +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBM3850M2/x3950M2*"); _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 11/12] adt7470: Check input range when sysfs files are written 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:19 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7470.c | 77 +++++++++++++++++++++++++++++++++++++++-------- 1 files changed, 64 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index ef26014..5acc800 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -345,6 +345,11 @@ static ssize_t show_temp_min(struct device *dev, return sprintf(buf, "%d\n", 1000 * data->temp_min[attr->index]); } +static int range_check(const long val, const long min, const long max) +{ + return val >= min && val <= max; +} + static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -353,7 +358,14 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -381,7 +393,14 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -430,11 +449,14 @@ static ssize_t set_fan_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + if (!range_check(temp, 0, 65535)) + return -EINVAL; mutex_lock(&data->lock); data->fan_max[attr->index] = temp; @@ -465,11 +487,14 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + if (!range_check(temp, 0, 65535)) + return -EINVAL; mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -507,9 +532,12 @@ static ssize_t set_force_pwm_max(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + mutex_lock(&data->lock); data->force_pwm_max = temp; reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); @@ -537,7 +565,10 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -564,7 +595,10 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -592,7 +626,10 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -630,7 +667,14 @@ static ssize_t set_pwm_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; @@ -658,11 +702,14 @@ static ssize_t set_pwm_auto(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); int pwm_auto_reg_mask; + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + if (attr->index % 2) pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; else @@ -716,10 +763,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); if (temp < 0) return temp; ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 11/12] adt7470: Check input range when sysfs @ 2008-10-07 1:19 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7470.c | 77 +++++++++++++++++++++++++++++++++++++++-------- 1 files changed, 64 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index ef26014..5acc800 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -345,6 +345,11 @@ static ssize_t show_temp_min(struct device *dev, return sprintf(buf, "%d\n", 1000 * data->temp_min[attr->index]); } +static int range_check(const long val, const long min, const long max) +{ + return val >= min && val <= max; +} + static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -353,7 +358,14 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -381,7 +393,14 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -430,11 +449,14 @@ static ssize_t set_fan_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + if (!range_check(temp, 0, 65535)) + return -EINVAL; mutex_lock(&data->lock); data->fan_max[attr->index] = temp; @@ -465,11 +487,14 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + if (!range_check(temp, 0, 65535)) + return -EINVAL; mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -507,9 +532,12 @@ static ssize_t set_force_pwm_max(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + mutex_lock(&data->lock); data->force_pwm_max = temp; reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); @@ -537,7 +565,10 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -564,7 +595,10 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -592,7 +626,10 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -630,7 +667,14 @@ static ssize_t set_pwm_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; @@ -658,11 +702,14 @@ static ssize_t set_pwm_auto(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); int pwm_auto_reg_mask; + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + if (attr->index % 2) pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; else @@ -716,10 +763,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); if (temp < 0) return temp; _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [lm-sensors] [PATCH 11/12] adt7470: Check input range when 2008-10-07 1:19 ` [lm-sensors] [PATCH 11/12] adt7470: Check input range when sysfs Darrick J. Wong (?) @ 2008-10-09 9:09 ` Jean Delvare -1 siblings, 0 replies; 60+ messages in thread From: Jean Delvare @ 2008-10-09 9:09 UTC (permalink / raw) To: lm-sensors Hi Darrick, On Mon, 06 Oct 2008 18:19:19 -0700, Darrick J. Wong wrote: > No description for this patch? IMHO it's large enough to deserve one. > Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> > --- > > drivers/hwmon/adt7470.c | 77 +++++++++++++++++++++++++++++++++++++++-------- > 1 files changed, 64 insertions(+), 13 deletions(-) > > diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c > index ef26014..5acc800 100644 > --- a/drivers/hwmon/adt7470.c > +++ b/drivers/hwmon/adt7470.c > @@ -345,6 +345,11 @@ static ssize_t show_temp_min(struct device *dev, > return sprintf(buf, "%d\n", 1000 * data->temp_min[attr->index]); > } > > +static int range_check(const long val, const long min, const long max) > +{ > + return val >= min && val <= max; > +} Should definitely be inlined. > + > static ssize_t set_temp_min(struct device *dev, > struct device_attribute *devattr, > const char *buf, > @@ -353,7 +358,14 @@ static ssize_t set_temp_min(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10) / 1000; > + long temp; > + > + if (strict_strtol(buf, 10, &temp)) > + return -EINVAL; > + > + temp /= 1000; While you're here, proper rounding would be welcome. > + if (!range_check(temp, 0, 255)) > + return -EINVAL; For temperature, voltage and fan speed values, the standard behavior is best effort: we pick the nearest available value instead of returning an error. We have a function for that: SENSORS_LIMIT(). Please use it. Rationale: the boundaries for these values are chip-dependent so it isn't fair to cause user commands to fail. We do range checks for values which are normalized, such as PWM values (range 0-255 for all chips) or when discrete values have specific meanings so picking the nearest possible value makes no sense (e.g. PWM modes.) > > mutex_lock(&data->lock); > data->temp_min[attr->index] = temp; > @@ -381,7 +393,14 @@ static ssize_t set_temp_max(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10) / 1000; > + long temp; > + > + if (strict_strtol(buf, 10, &temp)) > + return -EINVAL; > + > + temp /= 1000; > + if (!range_check(temp, 0, 255)) > + return -EINVAL; > > mutex_lock(&data->lock); > data->temp_max[attr->index] = temp; > @@ -430,11 +449,14 @@ static ssize_t set_fan_max(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10); > + long temp; > > - if (!temp) > + if (strict_strtol(buf, 10, &temp) || !temp) > return -EINVAL; > + > temp = FAN_RPM_TO_PERIOD(temp); > + if (!range_check(temp, 0, 65535)) Do you really want to accept 0 as a valid value? show_fan_max() will consider it an invalid value. > + return -EINVAL; > > mutex_lock(&data->lock); > data->fan_max[attr->index] = temp; > @@ -465,11 +487,14 @@ static ssize_t set_fan_min(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10); > + long temp; > > - if (!temp) > + if (strict_strtol(buf, 10, &temp) || !temp) > return -EINVAL; > + > temp = FAN_RPM_TO_PERIOD(temp); > + if (!range_check(temp, 0, 65535)) Ditto. > + return -EINVAL; > > mutex_lock(&data->lock); > data->fan_min[attr->index] = temp; > @@ -507,9 +532,12 @@ static ssize_t set_force_pwm_max(struct device *dev, > { > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10); > + long temp; > u8 reg; > > + if (strict_strtol(buf, 10, &temp)) > + return -EINVAL; > + > mutex_lock(&data->lock); > data->force_pwm_max = temp; > reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); > @@ -537,7 +565,10 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10); > + long temp; > + > + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) > + return -EINVAL; > > mutex_lock(&data->lock); > data->pwm[attr->index] = temp; > @@ -564,7 +595,10 @@ static ssize_t set_pwm_max(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10); > + long temp; > + > + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) > + return -EINVAL; > > mutex_lock(&data->lock); > data->pwm_max[attr->index] = temp; > @@ -592,7 +626,10 @@ static ssize_t set_pwm_min(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10); > + long temp; > + > + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) > + return -EINVAL; > > mutex_lock(&data->lock); > data->pwm_min[attr->index] = temp; > @@ -630,7 +667,14 @@ static ssize_t set_pwm_tmin(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10) / 1000; > + long temp; > + > + if (strict_strtol(buf, 10, &temp)) > + return -EINVAL; > + > + temp /= 1000; > + if (!range_check(temp, 0, 255)) > + return -EINVAL; > > mutex_lock(&data->lock); > data->pwm_tmin[attr->index] = temp; > @@ -658,11 +702,14 @@ static ssize_t set_pwm_auto(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = simple_strtol(buf, NULL, 10); > int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); > int pwm_auto_reg_mask; > + long temp; > u8 reg; > > + if (strict_strtol(buf, 10, &temp)) > + return -EINVAL; > + > if (attr->index % 2) > pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; > else > @@ -716,10 +763,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, > struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > struct i2c_client *client = to_i2c_client(dev); > struct adt7470_data *data = i2c_get_clientdata(client); > - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); > int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); > + long temp; > u8 reg; > > + if (strict_strtol(buf, 10, &temp)) > + return -EINVAL; > + > + temp = cvt_auto_temp(temp); > if (temp < 0) > return temp; > Please send an updated patch. Same comments apply to the adt7473 patch as well. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 12/12] adt7473: Check inputs from sysfs writes 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong @ 2008-10-07 1:19 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7473.c | 96 ++++++++++++++++++++++++++++++++++++++++------- 1 files changed, 82 insertions(+), 14 deletions(-) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 3a0b631..b4bcb63 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -360,6 +360,11 @@ static ssize_t show_volt_min(struct device *dev, decode_volt(attr->index, data->volt_min[attr->index])); } +static int range_check(const long val, const long min, const long max) +{ + return val >= min && val <= max; +} + static ssize_t set_volt_min(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -368,7 +373,14 @@ static ssize_t set_volt_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); + if (!range_check(volt, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->volt_min[attr->index] = volt; @@ -397,7 +409,14 @@ static ssize_t set_volt_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); + if (!range_check(volt, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->volt_max[attr->index] = volt; @@ -452,8 +471,15 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -483,8 +509,15 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -526,11 +559,14 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + if (!range_check(temp, 0, 65535)) + return -EINVAL; mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -569,7 +605,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev, u8 reg; struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; mutex_lock(&data->lock); data->max_duty_at_overheat = !!temp; @@ -598,7 +637,10 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -625,7 +667,10 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -653,7 +698,10 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -683,8 +731,15 @@ static ssize_t set_temp_tmax(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_tmax[attr->index] = temp; @@ -714,8 +769,15 @@ static ssize_t set_temp_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_tmin[attr->index] = temp; @@ -752,7 +814,10 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 0: @@ -816,7 +881,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 1: ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [lm-sensors] [PATCH 12/12] adt7473: Check inputs from sysfs writes @ 2008-10-07 1:19 ` Darrick J. Wong 0 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:19 UTC (permalink / raw) To: Darrick J. Wong, Andrew Morton; +Cc: linux-kernel, lm-sensors Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> --- drivers/hwmon/adt7473.c | 96 ++++++++++++++++++++++++++++++++++++++++------- 1 files changed, 82 insertions(+), 14 deletions(-) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 3a0b631..b4bcb63 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -360,6 +360,11 @@ static ssize_t show_volt_min(struct device *dev, decode_volt(attr->index, data->volt_min[attr->index])); } +static int range_check(const long val, const long min, const long max) +{ + return val >= min && val <= max; +} + static ssize_t set_volt_min(struct device *dev, struct device_attribute *devattr, const char *buf, @@ -368,7 +373,14 @@ static ssize_t set_volt_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); + if (!range_check(volt, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->volt_min[attr->index] = volt; @@ -397,7 +409,14 @@ static ssize_t set_volt_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); + if (!range_check(volt, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->volt_max[attr->index] = volt; @@ -452,8 +471,15 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -483,8 +509,15 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -526,11 +559,14 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + if (!range_check(temp, 0, 65535)) + return -EINVAL; mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -569,7 +605,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev, u8 reg; struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; mutex_lock(&data->lock); data->max_duty_at_overheat = !!temp; @@ -598,7 +637,10 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -625,7 +667,10 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -653,7 +698,10 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp) || !range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -683,8 +731,15 @@ static ssize_t set_temp_tmax(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_tmax[attr->index] = temp; @@ -714,8 +769,15 @@ static ssize_t set_temp_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp /= 1000; temp = encode_temp(data->temp_twos_complement, temp); + if (!range_check(temp, 0, 255)) + return -EINVAL; mutex_lock(&data->lock); data->temp_tmin[attr->index] = temp; @@ -752,7 +814,10 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 0: @@ -816,7 +881,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 1: _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [PATCH 00/12] Various hwmon patches 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong ` (12 preceding siblings ...) (?) @ 2008-10-07 1:27 ` Darrick J. Wong -1 siblings, 0 replies; 60+ messages in thread From: Darrick J. Wong @ 2008-10-07 1:27 UTC (permalink / raw) To: linux-scsi Sorry, I totally fat-fingered this onto the wrong mailing list. Apologies for the spam. --D ^ permalink raw reply [flat|nested] 60+ messages in thread
end of thread, other threads:[~2008-10-15 8:48 UTC | newest] Thread overview: 60+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-10-07 1:18 [PATCH 00/12] Various hwmon patches Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong 2008-10-07 1:18 ` [PATCH 01/12] hwmon: Define sysfs interface for energy consumption register Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] [PATCH 01/12] hwmon: Define sysfs interface for energy Darrick J. Wong 2008-10-08 8:09 ` [lm-sensors] [PATCH 01/12] hwmon: Define sysfs interface for energy consumption register Jean Delvare 2008-10-08 8:09 ` [lm-sensors] [PATCH 01/12] hwmon: Define sysfs interface for Jean Delvare 2008-10-07 1:18 ` [PATCH 02/12] adt7462: New hwmon driver Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong 2008-10-07 1:18 ` [PATCH 03/12] adt7473: Fix some bogosity in documentation file Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] [PATCH 03/12] adt7473: Fix some bogosity in Darrick J. Wong 2008-10-08 9:08 ` [lm-sensors] [PATCH 03/12] adt7473: Fix some bogosity in documentation file Jean Delvare 2008-10-08 9:08 ` [lm-sensors] [PATCH 03/12] adt7473: Fix some bogosity in Jean Delvare 2008-10-07 1:18 ` [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be temp*-auto-point* Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be Darrick J. Wong 2008-10-08 9:25 ` [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be temp*-auto-point* Jean Delvare 2008-10-08 9:25 ` [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to be Jean Delvare 2008-10-08 18:36 ` [lm-sensors] [PATCH 04/12] adt7470: Fix pwm*-auto-point* to Darrick J. Wong 2008-10-07 1:18 ` [PATCH 05/12] adt7470: Add documentation Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong 2008-10-08 9:46 ` Jean Delvare 2008-10-08 9:46 ` Jean Delvare 2008-10-08 18:50 ` Darrick J. Wong 2008-10-09 10:31 ` Jean Delvare 2008-10-09 21:25 ` Darrick J. Wong 2008-10-10 8:25 ` Jean Delvare 2008-10-07 1:18 ` [PATCH 06/12] adt7470: Load automatically on IntelliStation Z30 via DMI Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] [PATCH 06/12] adt7470: Load automatically on Darrick J. Wong 2008-10-08 11:08 ` [lm-sensors] [PATCH 06/12] adt7470: Load automatically on IntelliStation Z30 via DMI Jean Delvare 2008-10-08 11:08 ` [lm-sensors] [PATCH 06/12] adt7470: Load automatically on Jean Delvare 2008-10-07 1:18 ` [PATCH 07/12] ics932s401: New driver Darrick J. Wong 2008-10-07 1:18 ` [lm-sensors] " Darrick J. Wong 2008-10-08 11:09 ` Jean Delvare 2008-10-08 11:09 ` Jean Delvare 2008-10-08 18:26 ` Darrick J. Wong 2008-10-09 11:37 ` Jean Delvare 2008-10-07 1:19 ` [PATCH 08/12] i5k_amb: Load automatically on all 5000/5400 chipsets Darrick J. Wong 2008-10-07 1:19 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Darrick J. Wong 2008-10-08 11:13 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all 5000/5400 chipsets Jean Delvare 2008-10-08 11:13 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Jean Delvare 2008-10-08 18:19 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on Darrick J. Wong 2008-10-09 11:43 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Jean Delvare 2008-10-10 17:54 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on Darrick J. Wong 2008-10-15 8:48 ` [lm-sensors] [PATCH 08/12] i5k_amb: Load automatically on all Jean Delvare 2008-10-07 1:19 ` [PATCH 09/12] ibmpex: Automatically load on IBM systems via DMI Darrick J. Wong 2008-10-07 1:19 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Darrick J. Wong 2008-10-08 12:01 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM systems via DMI Jean Delvare 2008-10-08 12:01 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Jean Delvare 2008-10-08 14:33 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM systems via DMI Christian Krafft 2008-10-08 14:33 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Christian Krafft 2008-10-08 18:09 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on Darrick J. Wong 2008-10-09 11:47 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on IBM Jean Delvare 2008-10-09 17:21 ` [lm-sensors] [PATCH 09/12] ibmpex: Automatically load on Darrick J. Wong 2008-10-07 1:19 ` [PATCH 10/12] ibmaem: Automatically load on IBM systems via DMI Darrick J. Wong 2008-10-07 1:19 ` [lm-sensors] [PATCH 10/12] ibmaem: Automatically load on IBM Darrick J. Wong 2008-10-07 1:19 ` [PATCH 11/12] adt7470: Check input range when sysfs files are written Darrick J. Wong 2008-10-07 1:19 ` [lm-sensors] [PATCH 11/12] adt7470: Check input range when sysfs Darrick J. Wong 2008-10-09 9:09 ` [lm-sensors] [PATCH 11/12] adt7470: Check input range when Jean Delvare 2008-10-07 1:19 ` [PATCH 12/12] adt7473: Check inputs from sysfs writes Darrick J. Wong 2008-10-07 1:19 ` [lm-sensors] " Darrick J. Wong 2008-10-07 1:27 ` [PATCH 00/12] Various hwmon patches Darrick J. Wong
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.