From: Lars Michael Jogback <lm@jogback.se>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
Date: Mon, 27 Oct 2008 20:40:38 +0100 [thread overview]
Message-ID: <20081027194038.GA7004@cleopatra.jogback.se> (raw)
In-Reply-To: <49056FEA.4070405@kernel.org>
* Tejun Heo <tj@kernel.org> [2008-10-27 16:38:18]:
> Oh.. one more thing. Can you please try the attached patch and post the
> failing log?
Yank the drive:
[ 423.185630] ata7: XXX error_intr irq_stat=0x8040800
[ 423.200853] ata7.02: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xf
[ 423.200930] ata7: SError: { PHYRdyChg CommWake DevExch }
[ 423.201065] ata7.02: hard resetting link
[ 423.988033] ata7.02: SATA link down (SStatus 0 SControl 320)
[ 423.988033] ata7: failed to recover some devices, retrying in 5 secs
[ 429.320975] ata7.02: hard resetting link
[ 429.657112] ata7.02: SATA link down (SStatus 0 SControl 320)
[ 429.657215] ata7: failed to recover some devices, retrying in 5 secs
[ 435.205828] ata7.02: hard resetting link
[ 435.663470] ata7.02: SATA link down (SStatus 0 SControl 320)
[ 435.663573] ata7.02: disabled
[ 436.233999] ata7: EH complete
[ 436.234100] ata7.02: detaching (SCSI 7:2:0:0)
[ 436.234390] sd 7:2:0:0: [sdn] Synchronizing SCSI cache
[ 436.237266] sd 7:2:0:0: [sdn] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 436.237399] sd 7:2:0:0: [sdn] Stopping disk
[ 436.237471] sd 7:2:0:0: [sdn] START_STOP FAILED
[ 436.237537] sd 7:2:0:0: [sdn] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Hotplug the drive:
[ 457.946173] ata7: XXX error_intr irq_stat=0x8040800
[ 457.946173] ata7: XXX error_intr irq_stat=0x8000800
[ 457.959773] ata7.02: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xf
[ 457.959849] ata7: SError: { PHYRdyChg CommWake DevExch }
[ 457.959985] ata7.02: hard resetting link
[ 458.740089] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 458.740173] ata7: XXX error_intr irq_stat=0x60002
[ 458.740252] ata7: XXX error_intr cerr=4
[ 458.755959] ata7.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 458.756096] ata7.15: hard resetting link
[ 461.059644] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 461.059946] ata7.00: hard resetting link
[ 461.395778] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 461.395852] ata7.01: hard resetting link
[ 461.736413] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 461.736490] ata7.02: hard resetting link
[ 462.107859] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 462.107935] ata7.03: hard resetting link
[ 462.471134] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 462.471210] ata7.04: hard resetting link
[ 462.810982] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 462.811057] ata7.05: hard resetting link
[ 463.146993] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 463.159869] ata7.00: configured for UDMA/100
[ 463.172734] ata7.01: configured for UDMA/100
[ 463.172811] ata7: XXX error_intr irq_stat=0x60002
[ 463.172882] ata7: XXX error_intr cerr=4
[ 463.186852] ata7.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 463.186927] ata7.15: hard resetting link
[ 465.319661] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 465.319970] ata7.00: hard resetting link
[ 465.657449] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 465.657525] ata7.01: hard resetting link
[ 465.992843] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 465.992918] ata7.02: hard resetting link
[ 466.328237] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 466.328312] ata7.03: hard resetting link
[ 466.663786] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 466.663861] ata7.04: hard resetting link
[ 467.002569] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 467.002646] ata7.05: hard resetting link
[ 467.336553] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 467.351825] ata7.00: configured for UDMA/100
[ 467.364948] ata7.01: configured for UDMA/100
[ 467.365025] ata7: XXX error_intr irq_stat=0x60002
[ 467.365096] ata7: XXX error_intr cerr=4
[ 467.379054] ata7.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 467.379128] ata7.02: failed to recover link after 3 tries, disabling
[ 467.379200] ata7: failed to recover PMP, retrying in 5 secs
[ 472.390964] ata7.15: hard resetting link
[ 474.544791] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 474.859237] ata7.00: hard resetting link
[ 475.195706] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 475.195793] ata7.01: hard resetting link
[ 475.535565] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 475.535641] ata7.03: hard resetting link
[ 475.871163] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 475.871238] ata7.04: hard resetting link
[ 476.208521] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 476.208597] ata7.05: hard resetting link
[ 476.547685] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 476.560025] ata7.00: configured for UDMA/100
[ 476.572026] ata7.01: configured for UDMA/100
[ 476.584854] ata7.03: configured for UDMA/100
[ 476.597676] ata7.04: configured for UDMA/100
[ 476.935580] ata7: EH complete
[ 476.935691] sd 7:0:0:0: [sdl] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.935798] sd 7:0:0:0: [sdl] Write Protect is off
[ 476.935865] sd 7:0:0:0: [sdl] Mode Sense: 00 3a 00 00
[ 476.935885] sd 7:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.935991] sd 7:1:0:0: [sdm] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936086] sd 7:1:0:0: [sdm] Write Protect is off
[ 476.936152] sd 7:1:0:0: [sdm] Mode Sense: 00 3a 00 00
[ 476.936171] sd 7:1:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.936276] sd 7:3:0:0: [sdo] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936370] sd 7:3:0:0: [sdo] Write Protect is off
[ 476.936437] sd 7:3:0:0: [sdo] Mode Sense: 00 3a 00 00
[ 476.936456] sd 7:3:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.936561] sd 7:4:0:0: [sdp] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936655] sd 7:4:0:0: [sdp] Write Protect is off
[ 476.936722] sd 7:4:0:0: [sdp] Mode Sense: 00 3a 00 00
[ 476.936740] sd 7:4:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.936845] sd 7:0:0:0: [sdl] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936938] sd 7:0:0:0: [sdl] Write Protect is off
[ 476.937005] sd 7:0:0:0: [sdl] Mode Sense: 00 3a 00 00
[ 476.937024] sd 7:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.937128] sd 7:1:0:0: [sdm] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.937236] sd 7:1:0:0: [sdm] Write Protect is off
[ 476.937303] sd 7:1:0:0: [sdm] Mode Sense: 00 3a 00 00
[ 476.937322] sd 7:1:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.937427] sd 7:3:0:0: [sdo] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.937521] sd 7:3:0:0: [sdo] Write Protect is off
[ 476.937588] sd 7:3:0:0: [sdo] Mode Sense: 00 3a 00 00
[ 476.937606] sd 7:3:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.937710] sd 7:4:0:0: [sdp] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.937804] sd 7:4:0:0: [sdp] Write Protect is off
[ 476.937871] sd 7:4:0:0: [sdp] Mode Sense: 00 3a 00 00
[ 476.937890] sd 7:4:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Best Regards,
/LM
next prev parent reply other threads:[~2008-10-27 19:44 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-11 14:27 Problem w/ hotplug on sata_sil24 w/ PMP (sil3726) Lars Michael Jogback
2008-10-14 5:51 ` Tejun Heo
2008-10-14 20:19 ` Lars Michael Jogback
2008-10-15 7:03 ` Tejun Heo
2008-10-18 16:52 ` Lars Michael Jogback
2008-10-23 18:14 ` Lars Michael Jogback
2008-10-27 7:35 ` Tejun Heo
2008-10-27 7:38 ` Tejun Heo
2008-10-27 8:47 ` Lars Michael Jogback
2008-10-27 19:40 ` Lars Michael Jogback [this message]
2008-11-10 6:47 ` Tejun Heo
2008-11-10 18:26 ` Lars Michael Jogback
2008-11-11 2:56 ` Tejun Heo
[not found] <359604ECF8F440408B9634E6146249B42923805F@mail.scl.local>
[not found] ` <20110628095723.GC3386@htj.dyndns.org>
2011-06-30 17:53 ` Derry Bryson
2011-07-12 15:01 ` tj
2011-07-12 19:21 ` Derry Bryson
2011-07-13 13:34 ` tj
2011-07-13 14:39 ` tj
2011-07-13 16:23 ` Derry Bryson
2011-07-14 7:14 ` tj
2011-07-14 17:37 ` Derry Bryson
2011-07-21 9:00 ` tj
2011-07-21 16:22 ` Derry Bryson
2011-07-22 9:50 ` tj
2011-07-22 17:29 ` Derry Bryson
2011-07-22 19:34 ` Derry Bryson
2011-07-30 12:54 ` tj
2011-09-30 21:54 ` Mike I
2011-10-06 5:48 ` Gwendal Grignou
[not found] ` <CAMHSBOV8rSW3jumpx8URZrgo8w1He9zruP7yAOw7uhQOaAj3Xg@mail.gmail.com>
2011-10-06 6:07 ` Gwendal Grignou
2011-10-08 18:25 ` Michael Ihrcke
2011-10-12 2:06 ` Michael Ihrcke
2011-10-13 2:09 ` Mike I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081027194038.GA7004@cleopatra.jogback.se \
--to=lm@jogback.se \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.