From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org
Cc: David Brownell <dbrownell@users.sourceforge.net>,
Pierre Ossman <drzeus-mmc@drzeus.cx>
Subject: [PATCH 3/3] mmc_spi: Add support for OpenFirmware bindings
Date: Thu, 30 Oct 2008 22:56:36 +0300 [thread overview]
Message-ID: <20081030195636.GC13640@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20081030195546.GA30645@oksana.dev.rtsoft.ru>
The support is implemented via platform data accessors, new module
(of_mmc_spi) will be created automatically when the driver compiles
on OpenFirmware platforms. Link-time dependency will load the module
automatically.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/mmc/host/Makefile | 3 +
drivers/mmc/host/mmc_spi.c | 4 +-
drivers/mmc/host/of_mmc_spi.c | 147 +++++++++++++++++++++++++++++++++++++++++
include/linux/spi/mmc_spi.h | 8 ++
4 files changed, 161 insertions(+), 1 deletions(-)
create mode 100644 drivers/mmc/host/of_mmc_spi.c
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index c794cc5..f485328 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -19,6 +19,9 @@ obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
+endif
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 07faf54..416a0e3 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1285,7 +1285,7 @@ static int mmc_spi_probe(struct spi_device *spi)
/* Platform data is used to hook up things like card sensing
* and power switching gpios.
*/
- host->pdata = spi->dev.platform_data;
+ host->pdata = mmc_spi_get_pdata(spi);
if (host->pdata)
mmc->ocr_avail = host->pdata->ocr_mask;
if (!mmc->ocr_avail) {
@@ -1368,6 +1368,7 @@ fail_glue_init:
fail_nobuf1:
mmc_free_host(mmc);
+ mmc_spi_put_pdata(spi);
dev_set_drvdata(&spi->dev, NULL);
nomem:
@@ -1402,6 +1403,7 @@ static int __devexit mmc_spi_remove(struct spi_device *spi)
spi->max_speed_hz = mmc->f_max;
mmc_free_host(mmc);
+ mmc_spi_put_pdata(spi);
dev_set_drvdata(&spi->dev, NULL);
}
return 0;
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
new file mode 100644
index 0000000..b5e5555
--- /dev/null
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -0,0 +1,147 @@
+/*
+ * OpenFirmware bindings for the MMC-over-SPI driver
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+
+enum {
+ CD_GPIO = 0,
+ WP_GPIO,
+ NUM_GPIOS,
+};
+
+struct of_mmc_spi {
+ int gpios[NUM_GPIOS];
+ bool alow_gpios[NUM_GPIOS];
+ struct mmc_spi_platform_data pdata;
+};
+
+static struct of_mmc_spi *to_of_mmc_spi(struct device *dev)
+{
+ return container_of(dev->platform_data, struct of_mmc_spi, pdata);
+}
+
+static int of_mmc_spi_read_gpio(struct device *dev, int gpio_num)
+{
+ struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+ const bool active_low = oms->alow_gpios[gpio_num];
+ const bool value = gpio_get_value(oms->gpios[gpio_num]);
+
+ return active_low ^ value;
+}
+
+static int of_mmc_spi_get_cd(struct device *dev)
+{
+ return of_mmc_spi_read_gpio(dev, CD_GPIO);
+}
+
+static int of_mmc_spi_get_ro(struct device *dev)
+{
+ return of_mmc_spi_read_gpio(dev, WP_GPIO);
+}
+
+struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ struct of_mmc_spi *oms;
+ const u32 *voltage_ranges;
+ int num_ranges;
+ int i;
+ int ret = -EINVAL;
+
+ if (dev->platform_data || !np)
+ return dev->platform_data;
+
+ oms = kzalloc(sizeof(*oms), GFP_KERNEL);
+ if (!oms)
+ return NULL;
+
+ voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
+ num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
+ if (!voltage_ranges || !num_ranges) {
+ dev_err(dev, "OF: voltage-ranges unspecified\n");
+ goto err_ocr;
+ }
+
+ for (i = 0; i < num_ranges; i++) {
+ const int j = i * 2;
+
+ ret = mmc_vddrange_to_ocrmask(voltage_ranges[j],
+ voltage_ranges[j + 1],
+ &oms->pdata.ocr_mask);
+ if (ret) {
+ dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
+ goto err_ocr;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
+ enum of_gpio_flags gpio_flags;
+
+ oms->gpios[i] = of_get_gpio(np, i, &gpio_flags);
+ if (!gpio_is_valid(oms->gpios[i]))
+ continue;
+
+ ret = gpio_request(oms->gpios[i], dev->bus_id);
+ if (ret < 0) {
+ oms->gpios[i] = -EINVAL;
+ continue;
+ }
+
+ if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+ oms->alow_gpios[i] = true;
+ }
+
+ if (gpio_is_valid(oms->gpios[CD_GPIO]))
+ oms->pdata.get_cd = of_mmc_spi_get_cd;
+ if (gpio_is_valid(oms->gpios[CD_GPIO]))
+ oms->pdata.get_ro = of_mmc_spi_get_ro;
+
+ /* We don't support interrupts yet, let's poll. */
+ oms->pdata.caps |= MMC_CAP_NEEDS_POLL;
+
+ dev->platform_data = &oms->pdata;
+ return dev->platform_data;
+err_ocr:
+ kfree(oms);
+ return NULL;
+}
+EXPORT_SYMBOL(mmc_spi_get_pdata);
+
+void mmc_spi_put_pdata(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+ int i;
+
+ if (!dev->platform_data || !np)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
+ if (gpio_is_valid(oms->gpios[i]))
+ gpio_free(oms->gpios[i]);
+ }
+ kfree(oms);
+ dev->platform_data = NULL;
+}
+EXPORT_SYMBOL(mmc_spi_put_pdata);
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index a3626ae..87ee555 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -41,4 +41,12 @@ struct mmc_spi_platform_data {
void (*setpower)(struct device *, unsigned int maskval);
};
+#ifdef CONFIG_OF
+extern struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi);
+extern void mmc_spi_put_pdata(struct spi_device *spi);
+#else
+#define mmc_spi_get_pdata(spi) ((spi)->dev.platform_data)
+#define mmc_spi_put_pdata(spi)
+#endif /* CONFIG_OF */
+
#endif /* __LINUX_SPI_MMC_SPI_H */
--
1.5.6.3
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org
Cc: David Brownell <dbrownell@users.sourceforge.net>,
Pierre Ossman <drzeus-mmc@drzeus.cx>,
Grant Likely <grant.likely@secretlab.ca>
Subject: [PATCH 3/3] mmc_spi: Add support for OpenFirmware bindings
Date: Thu, 30 Oct 2008 22:56:36 +0300 [thread overview]
Message-ID: <20081030195636.GC13640@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20081030195546.GA30645@oksana.dev.rtsoft.ru>
The support is implemented via platform data accessors, new module
(of_mmc_spi) will be created automatically when the driver compiles
on OpenFirmware platforms. Link-time dependency will load the module
automatically.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/mmc/host/Makefile | 3 +
drivers/mmc/host/mmc_spi.c | 4 +-
drivers/mmc/host/of_mmc_spi.c | 147 +++++++++++++++++++++++++++++++++++++++++
include/linux/spi/mmc_spi.h | 8 ++
4 files changed, 161 insertions(+), 1 deletions(-)
create mode 100644 drivers/mmc/host/of_mmc_spi.c
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index c794cc5..f485328 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -19,6 +19,9 @@ obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
+endif
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 07faf54..416a0e3 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1285,7 +1285,7 @@ static int mmc_spi_probe(struct spi_device *spi)
/* Platform data is used to hook up things like card sensing
* and power switching gpios.
*/
- host->pdata = spi->dev.platform_data;
+ host->pdata = mmc_spi_get_pdata(spi);
if (host->pdata)
mmc->ocr_avail = host->pdata->ocr_mask;
if (!mmc->ocr_avail) {
@@ -1368,6 +1368,7 @@ fail_glue_init:
fail_nobuf1:
mmc_free_host(mmc);
+ mmc_spi_put_pdata(spi);
dev_set_drvdata(&spi->dev, NULL);
nomem:
@@ -1402,6 +1403,7 @@ static int __devexit mmc_spi_remove(struct spi_device *spi)
spi->max_speed_hz = mmc->f_max;
mmc_free_host(mmc);
+ mmc_spi_put_pdata(spi);
dev_set_drvdata(&spi->dev, NULL);
}
return 0;
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
new file mode 100644
index 0000000..b5e5555
--- /dev/null
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -0,0 +1,147 @@
+/*
+ * OpenFirmware bindings for the MMC-over-SPI driver
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+
+enum {
+ CD_GPIO = 0,
+ WP_GPIO,
+ NUM_GPIOS,
+};
+
+struct of_mmc_spi {
+ int gpios[NUM_GPIOS];
+ bool alow_gpios[NUM_GPIOS];
+ struct mmc_spi_platform_data pdata;
+};
+
+static struct of_mmc_spi *to_of_mmc_spi(struct device *dev)
+{
+ return container_of(dev->platform_data, struct of_mmc_spi, pdata);
+}
+
+static int of_mmc_spi_read_gpio(struct device *dev, int gpio_num)
+{
+ struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+ const bool active_low = oms->alow_gpios[gpio_num];
+ const bool value = gpio_get_value(oms->gpios[gpio_num]);
+
+ return active_low ^ value;
+}
+
+static int of_mmc_spi_get_cd(struct device *dev)
+{
+ return of_mmc_spi_read_gpio(dev, CD_GPIO);
+}
+
+static int of_mmc_spi_get_ro(struct device *dev)
+{
+ return of_mmc_spi_read_gpio(dev, WP_GPIO);
+}
+
+struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ struct of_mmc_spi *oms;
+ const u32 *voltage_ranges;
+ int num_ranges;
+ int i;
+ int ret = -EINVAL;
+
+ if (dev->platform_data || !np)
+ return dev->platform_data;
+
+ oms = kzalloc(sizeof(*oms), GFP_KERNEL);
+ if (!oms)
+ return NULL;
+
+ voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
+ num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
+ if (!voltage_ranges || !num_ranges) {
+ dev_err(dev, "OF: voltage-ranges unspecified\n");
+ goto err_ocr;
+ }
+
+ for (i = 0; i < num_ranges; i++) {
+ const int j = i * 2;
+
+ ret = mmc_vddrange_to_ocrmask(voltage_ranges[j],
+ voltage_ranges[j + 1],
+ &oms->pdata.ocr_mask);
+ if (ret) {
+ dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
+ goto err_ocr;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
+ enum of_gpio_flags gpio_flags;
+
+ oms->gpios[i] = of_get_gpio(np, i, &gpio_flags);
+ if (!gpio_is_valid(oms->gpios[i]))
+ continue;
+
+ ret = gpio_request(oms->gpios[i], dev->bus_id);
+ if (ret < 0) {
+ oms->gpios[i] = -EINVAL;
+ continue;
+ }
+
+ if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+ oms->alow_gpios[i] = true;
+ }
+
+ if (gpio_is_valid(oms->gpios[CD_GPIO]))
+ oms->pdata.get_cd = of_mmc_spi_get_cd;
+ if (gpio_is_valid(oms->gpios[CD_GPIO]))
+ oms->pdata.get_ro = of_mmc_spi_get_ro;
+
+ /* We don't support interrupts yet, let's poll. */
+ oms->pdata.caps |= MMC_CAP_NEEDS_POLL;
+
+ dev->platform_data = &oms->pdata;
+ return dev->platform_data;
+err_ocr:
+ kfree(oms);
+ return NULL;
+}
+EXPORT_SYMBOL(mmc_spi_get_pdata);
+
+void mmc_spi_put_pdata(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+ int i;
+
+ if (!dev->platform_data || !np)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
+ if (gpio_is_valid(oms->gpios[i]))
+ gpio_free(oms->gpios[i]);
+ }
+ kfree(oms);
+ dev->platform_data = NULL;
+}
+EXPORT_SYMBOL(mmc_spi_put_pdata);
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index a3626ae..87ee555 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -41,4 +41,12 @@ struct mmc_spi_platform_data {
void (*setpower)(struct device *, unsigned int maskval);
};
+#ifdef CONFIG_OF
+extern struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi);
+extern void mmc_spi_put_pdata(struct spi_device *spi);
+#else
+#define mmc_spi_get_pdata(spi) ((spi)->dev.platform_data)
+#define mmc_spi_put_pdata(spi)
+#endif /* CONFIG_OF */
+
#endif /* __LINUX_SPI_MMC_SPI_H */
--
1.5.6.3
next prev parent reply other threads:[~2008-10-30 19:56 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-30 19:55 [PATCH 0/3 RFC] MMC SPI support for OpenFirmware platforms Anton Vorontsov
2008-10-30 19:55 ` Anton Vorontsov
2008-10-30 19:56 ` [PATCH 1/3] powerpc: Add mmc-spi-slot bindings Anton Vorontsov
2008-10-30 19:56 ` Anton Vorontsov
2008-10-30 20:37 ` Grant Likely
2008-10-30 20:37 ` Grant Likely
2008-10-30 23:02 ` Anton Vorontsov
2008-10-30 23:02 ` Anton Vorontsov
2008-10-30 23:24 ` David Gibson
2008-10-30 23:24 ` David Gibson
2008-10-30 23:28 ` Anton Vorontsov
2008-10-30 23:28 ` Anton Vorontsov
2008-10-30 19:56 ` [PATCH 2/3] mmc: Add mmc_vddrange_to_ocrmask() helper function Anton Vorontsov
2008-10-30 19:56 ` Anton Vorontsov
2008-11-08 20:55 ` Pierre Ossman
2008-11-08 20:55 ` Pierre Ossman
2008-11-26 19:54 ` [PATCH v2] " Anton Vorontsov
2008-11-26 19:54 ` Anton Vorontsov
2008-11-30 20:06 ` Pierre Ossman
2008-11-30 20:06 ` Pierre Ossman
2008-12-01 11:53 ` Anton Vorontsov
2008-12-01 11:53 ` Anton Vorontsov
2008-12-14 17:28 ` Pierre Ossman
2008-12-14 17:28 ` Pierre Ossman
2008-10-30 19:56 ` Anton Vorontsov [this message]
2008-10-30 19:56 ` [PATCH 3/3] mmc_spi: Add support for OpenFirmware bindings Anton Vorontsov
2008-11-08 20:50 ` [PATCH 0/3 RFC] MMC SPI support for OpenFirmware platforms Pierre Ossman
2008-11-08 20:50 ` Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081030195636.GC13640@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=dbrownell@users.sourceforge.net \
--cc=drzeus-mmc@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.