From: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
To: Trent Piepho <tpiepho-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
Linux I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [lm-sensors] [patch 2.6.27-rc7] i2c: smbalert# support
Date: Fri, 21 Nov 2008 18:58:21 -0800 [thread overview]
Message-ID: <200811211858.22159.david-b@pacbell.net> (raw)
In-Reply-To: <Pine.LNX.4.64.0811211621340.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
On Friday 21 November 2008, Trent Piepho wrote:
> So yes, hardware keeps getting better. But you can't say, "I have twice the
> RAM so I can make my software twice as bloated as come out even." Because we
> also except to be able to do more with cheaper, lower power hardware.
Which wasn't my point at all; neither was even closely related:
> > The real counter-argument is that memory isn't *that* tight, especially
> > since the hardware capacity is growing.
If you're keen on saving a hundred bytes, you could probably get
it by removing some needless strings or moving code to init/exit
sections ... and in fact, get a lot more than that. Without any
loss of functionality.
WARNING: multiple messages have this Message-ID (diff)
From: David Brownell <david-b@pacbell.net>
To: Trent Piepho <tpiepho-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
Linux I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [lm-sensors] [patch 2.6.27-rc7] i2c: smbalert# support
Date: Sat, 22 Nov 2008 02:58:21 +0000 [thread overview]
Message-ID: <200811211858.22159.david-b@pacbell.net> (raw)
In-Reply-To: <Pine.LNX.4.64.0811211621340.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
On Friday 21 November 2008, Trent Piepho wrote:
> So yes, hardware keeps getting better. But you can't say, "I have twice the
> RAM so I can make my software twice as bloated as come out even." Because we
> also except to be able to do more with cheaper, lower power hardware.
Which wasn't my point at all; neither was even closely related:
> > The real counter-argument is that memory isn't *that* tight, especially
> > since the hardware capacity is growing.
If you're keen on saving a hundred bytes, you could probably get
it by removing some needless strings or moving code to init/exit
sections ... and in fact, get a lot more than that. Without any
loss of functionality.
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2008-11-22 2:58 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-16 12:34 [lm-sensors] lm75: Convert to new-style I2C driver Laurent Pinchart
2008-04-16 13:30 ` Jean Delvare
2008-04-16 13:49 ` Laurent Pinchart
2008-04-16 14:04 ` Jean Delvare
2008-04-16 17:27 ` David Brownell
[not found] ` <200804161027.49943.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-05-02 11:10 ` [patch 2.6.25-git] i2c: smbalert# support David Brownell
[not found] ` <200805020410.44723.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-05-05 5:56 ` [patch 2.6.265-rc1] " David Brownell
[not found] ` <200805042256.49252.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-09-23 22:32 ` [patch 2.6.27-rc7] " David Brownell
2008-09-23 22:32 ` [lm-sensors] " David Brownell
[not found] ` <200809231532.40083.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-09-26 1:07 ` Trent Piepho
2008-09-26 1:07 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0809251728130.7680-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-09-26 2:01 ` David Brownell
2008-09-26 2:01 ` David Brownell
[not found] ` <200809251902.00201.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-09-27 0:29 ` Trent Piepho
2008-09-27 0:29 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0809261652040.7680-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-10-17 19:04 ` David Brownell
2008-10-17 19:04 ` David Brownell
[not found] ` <200810171204.54448.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-10-17 20:43 ` Trent Piepho
2008-10-17 20:43 ` [lm-sensors] [i2c] " Trent Piepho
2008-11-18 8:15 ` Jean Delvare
2008-11-18 8:15 ` [lm-sensors] " Jean Delvare
[not found] ` <20081118091546.421d6b78-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-18 22:01 ` David Brownell
2008-11-18 22:01 ` [lm-sensors] " David Brownell
[not found] ` <200811181401.34809.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-19 9:51 ` Trent Piepho
2008-11-19 9:51 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0811190140510.11673-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-19 15:16 ` Jean Delvare
2008-11-19 15:16 ` Jean Delvare
[not found] ` <20081119161632.2d0bde9e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-20 22:00 ` Trent Piepho
2008-11-20 22:00 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0811201354310.11673-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-20 22:56 ` David Brownell
2008-11-20 22:56 ` David Brownell
[not found] ` <200811201456.36551.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-22 0:55 ` Trent Piepho
2008-11-22 0:55 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0811211621340.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-22 2:58 ` David Brownell [this message]
2008-11-22 2:58 ` David Brownell
2008-11-21 8:42 ` Jean Delvare
2008-11-21 8:42 ` [lm-sensors] " Jean Delvare
[not found] ` <20081121094218.34ecd82a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-22 6:04 ` Trent Piepho
2008-11-22 6:04 ` [lm-sensors] " Trent Piepho
[not found] ` <Pine.LNX.4.64.0811212122370.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-22 10:13 ` Jean Delvare
2008-11-22 10:13 ` [lm-sensors] " Jean Delvare
[not found] ` <20081122111340.0bfc2c05-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-22 20:28 ` Trent Piepho
2008-11-22 20:28 ` [lm-sensors] " Trent Piepho
[not found] ` <Pine.LNX.4.64.0811221055470.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-23 21:45 ` Jean Delvare
2008-11-23 21:45 ` [lm-sensors] " Jean Delvare
2008-11-19 13:57 ` Jean Delvare
[not found] ` <20081119145712.1abaa63f-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-19 18:08 ` David Brownell
2008-11-21 14:18 ` Jean Delvare
[not found] ` <20081121151808.324ca78c-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-21 16:24 ` David Brownell
[not found] ` <200811210824.55601.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-21 19:22 ` Jean Delvare
[not found] ` <20081121202223.0261fb9c-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-21 21:54 ` David Brownell
[not found] ` <200811211354.51501.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-22 9:03 ` Jean Delvare
[not found] ` <20081122100344.61cf42b7-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-22 9:48 ` David Brownell
2008-04-16 17:52 ` [lm-sensors] lm75: Convert to new-style I2C driver David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811211858.22159.david-b@pacbell.net \
--to=david-b-ybekhbn/0ldr7s880joybq@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=tpiepho-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.