From: Frans Pop <elendil@planet.nl>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl, greg@kroah.com, mingo@elte.hu,
jbarnes@virtuousgeek.org, lenb@kernel.org,
linux-kernel@vger.kernel.org, tiwai@suse.de,
akpm@linux-foundation.org, ink@jurassic.park.msu.ru
Subject: Re: Regression from 2.6.26: Hibernation (possibly suspend) broken on Toshiba R500 (bisected)
Date: Tue, 2 Dec 2008 06:29:24 +0100 [thread overview]
Message-ID: <200812020629.26714.elendil@planet.nl> (raw)
In-Reply-To: <alpine.LFD.2.00.0812012037320.3256@nehalem.linux-foundation.org>
[-- Attachment #1: Type: text/plain, Size: 762 bytes --]
On Tuesday 02 December 2008, Linus Torvalds wrote:
> That said, if you can show the differences in dmesg from the two cases,
> it would probably be interesting to see why it happens that way. Why
> did we bother setting up that PCI bus window in -rc3 at all? Was it
> there from the beginning?
Attached is a full diff between dmesg from -rc3 and -rc6 with your debug
patch.
I've cleaned up the diff a bit to make it more readable (mostly removal of
changes that I always get due to random USB load order changes - UHCI
still frequently loads before EHCI).
The most interesting points are probably at lines 298-346 and 639-649.
At the bottom there's a fairly long addition from the few suspend/resume
cycles I did (again, running with the debug patch).
[-- Attachment #2: rc3-rc6.diff --]
[-- Type: text/x-diff, Size: 94937 bytes --]
--- 2.6.28-rc3 2008-11-03 10:51:51.000000000 +0100
+++ 2.6.28-rc6_linus 2008-12-02 06:12:15.000000000 +0100
@@ -1,676 +1,1625 @@
BIOS EBDA/lowmem at: 0009fc00/0009fc00
-Linux version 2.6.28-rc3 (root@faramir) (gcc version 4.3.2 (Debian 4.3.2-1) ) #47 SMP Mon Nov 3 10:30:30 CET 2008
+Linux version 2.6.28-rc6 (root@faramir) (gcc version 4.3.2 (Debian 4.3.2-1) ) #58 SMP Tue Dec 2 04:56:59 CET 2008
Command line: root=/dev/mapper/main-root ro vga=791 quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable)
BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved)
BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS)
BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7e7b0 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000007e7b0000
0000000000 - 007e600000 page 2M
007e600000 - 007e7b0000 page 4k
kernel direct mapping tables up to 7e7b0000 @ 8000-c000
last_map_addr: 7e7b0000 end: 7e7b0000
-RAMDISK: 37ab8000 - 37fef345
+RAMDISK: 37ab8000 - 37fefbd6
ACPI: RSDP 000F7960, 0024 (r2 HP )
ACPI: XSDT 7E7C81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: FACP 7E7C8084, 00F4 (r4 HP 30C9 3 HP 1)
ACPI: DSDT 7E7C8538, 13484 (r1 HP nc2500 10000 MSFT 3000001)
ACPI: FACS 7E7E7D80, 0040
ACPI: SLIC 7E7C8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: HPET 7E7C83BC, 0038 (r1 HP 30C9 1 HP 1)
ACPI: APIC 7E7C83F4, 0068 (r1 HP 30C9 1 HP 1)
ACPI: MCFG 7E7C845C, 003C (r1 HP 30C9 1 HP 1)
ACPI: TCPA 7E7C8498, 0032 (r2 HP 30C9 1 HP 1)
ACPI: ASF! 7E7C84CC, 0069 (r16 HP CHIMAYU 1 HP 0)
ACPI: SSDT 7E7DB9BC, 02BE (r1 HP HPQPAT 1 MSFT 3000001)
ACPI: SSDT 7E7DC640, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
ACPI: SSDT 7E7DC89F, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
ACPI: SSDT 7E7DC945, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
-ACPI: DMI detected: Hewlett-Packard
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 007e7b0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- #2 [0000200000 - 000074e550] TEXT DATA BSS ==> [0000200000 - 000074e550]
- #3 [0037ab8000 - 0037fef345] RAMDISK ==> [0037ab8000 - 0037fef345]
+ #2 [0000200000 - 000074c510] TEXT DATA BSS ==> [0000200000 - 000074c510]
+ #3 [0037ab8000 - 0037fefbd6] RAMDISK ==> [0037ab8000 - 0037fefbd6]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007e7b0
On node 0 totalpages: 517967
DMA zone: 64 pages used for memmap
- DMA zone: 1459 pages reserved
- DMA zone: 2476 pages, LIFO batch:0
+ DMA zone: 1457 pages reserved
+ DMA zone: 2478 pages, LIFO batch:0
DMA32 zone: 8031 pages used for memmap
DMA32 zone: 505937 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f000000:7fc00000)
PERCPU: Allocating 49152 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
-Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508413
+Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508415
Kernel command line: root=/dev/mapper/main-root ro vga=791 quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
-Detected 1330.160 MHz processor.
+Detected 1330.139 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
-Memory: 2024344k/2072256k available (2300k kernel code, 388k absent, 46900k reserved, 1509k data, 324k init)
+Memory: 2024352k/2072256k available (2302k kernel code, 388k absent, 46892k reserved, 1507k data, 316k init)
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.32 BogoMIPS (lpj=5320640)
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.27 BogoMIPS (lpj=5320556)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20080926
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
-Calibrating delay using timer specific routine.. 2659.99 BogoMIPS (lpj=5319980)
+Calibrating delay using timer specific routine.. 2659.98 BogoMIPS (lpj=5319962)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
-Total of 2 processors activated (5320.31 BogoMIPS).
+Total of 2 processors activated (5320.25 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1400 bytes
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at f8000000 - fbffffff
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [C003] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xe0400000-0xe04fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x2000-0x2007]
pci 0000:00:02.1: reg 10 64bit mmio: [0xe0500000-0xe05fffff]
pci 0000:00:03.0: reg 10 64bit mmio: [0xe0600000-0xe060000f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: reg 10 io port: [0x2008-0x200f]
pci 0000:00:03.2: reg 14 io port: [0x2010-0x2013]
pci 0000:00:03.2: reg 18 io port: [0x2018-0x201f]
pci 0000:00:03.2: reg 1c io port: [0x2020-0x2023]
pci 0000:00:03.2: reg 20 io port: [0x2030-0x203f]
pci 0000:00:03.3: reg 10 io port: [0x2040-0x2047]
pci 0000:00:03.3: reg 14 32bit mmio: [0xe0601000-0xe0601fff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xe0620000-0xe063ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xe0640000-0xe0640fff]
pci 0000:00:19.0: reg 18 io port: [0x2060-0x207f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x2080-0x209f]
pci 0000:00:1a.1: reg 20 io port: [0x20a0-0x20bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0641000-0xe06413ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xe0644000-0xe0647fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x20c0-0x20df]
pci 0000:00:1d.1: reg 20 io port: [0x20e0-0x20ff]
pci 0000:00:1d.2: reg 20 io port: [0x2100-0x211f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0648000-0xe06483ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x2120-0x212f]
pci 0000:10:00.0: reg 10 64bit mmio: [0xe0000000-0xe0001fff]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xe0000000-0xe00fffff]
pci 0000:02:06.0: reg 10 32bit mmio: [0xe0100000-0xe0100fff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:02:06.1: reg 10 32bit mmio: [0xe0101000-0xe01017ff]
pci 0000:02:06.1: supports D1 D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.1: PME# disabled
pci 0000:02:06.2: reg 10 32bit mmio: [0xe0102000-0xe01020ff]
pci 0000:02:06.2: supports D1 D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.2: PME# disabled
pci 0000:02:06.3: reg 10 32bit mmio: [0xe0103000-0xe01030ff]
pci 0000:02:06.3: supports D1 D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xe0100000-0xe03fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT]
ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C130] (IRQs *10 11)
ACPI: PCI Interrupt Link [C131] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C144] (IRQs 10 *11)
ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080926]
ACPI: Power Resource [C29F] (on)
ACPI: Power Resource [C1C7] (off)
ACPI: Power Resource [C3AD] (off)
ACPI: Power Resource [C3B0] (off)
ACPI: Power Resource [C3C3] (off)
ACPI: Power Resource [C3C4] (off)
ACPI: Power Resource [C3C5] (off)
ACPI: Power Resource [C3C6] (off)
ACPI: Power Resource [C3C7] (off)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD GART found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7e7fffff could not be reserved
system 00:0a: ioport range 0x500-0x55f has been reserved
system 00:0a: ioport range 0x800-0x80f has been reserved
system 00:0a: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x2f8-0x2ff has been reserved
system 00:0c: ioport range 0x3f8-0x3ff has been reserved
system 00:0c: ioport range 0x1000-0x107f has been reserved
system 00:0c: ioport range 0x1100-0x113f has been reserved
system 00:0c: ioport range 0x1200-0x121f has been reserved
system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec000ff has been reserved
system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0c: iomem range 0xfed90000-0xfed99fff has been reserved
system 00:0d: iomem range 0xcee00-0xcffff has been reserved
system 00:0d: iomem range 0xd2000-0xd3fff has been reserved
system 00:0d: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
+pci 0000:02:06.0: BAR 9 0-3ffffff wrong alignment flags 21200 4000000 (0)
+pci 0000:02:06.0: BAR 9 bad alignment 0: [0x000000-0x3ffffff]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xe0000000-0xe00fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:06.0: IO window: 0x003000-0x0030ff
pci 0000:02:06.0: IO window: 0x003400-0x0034ff
-pci 0000:02:06.0: PREFETCH window: 0x80000000-0x83ffffff
-pci 0000:02:06.0: MEM window: 0x84000000-0x87ffffff
+pci 0000:02:06.0: MEM window: 0x80000000-0x83ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x3000-0x3fff
pci 0000:00:1e.0: MEM window: 0xe0100000-0xe03fffff
-pci 0000:00:1e.0: PREFETCH window: 0x00000080000000-0x00000083ffffff
+pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 08 index 0 mmio: [0x0-0x0]
bus: 08 index 1 mmio: [0x0-0x0]
bus: 08 index 2 mmio: [0x0-0x0]
bus: 08 index 3 mmio: [0x0-0x0]
bus: 10 index 0 mmio: [0x0-0x0]
bus: 10 index 1 mmio: [0xe0000000-0xe00fffff]
bus: 10 index 2 mmio: [0x0-0x0]
bus: 10 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0x3000-0x3fff]
bus: 02 index 1 mmio: [0xe0100000-0xe03fffff]
-bus: 02 index 2 mmio: [0x80000000-0x83ffffff]
+bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 io port: [0x00-0xffff]
bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff]
bus: 03 index 0 io port: [0x3000-0x30ff]
bus: 03 index 1 io port: [0x3400-0x34ff]
-bus: 03 index 2 mmio: [0x80000000-0x83ffffff]
-bus: 03 index 3 mmio: [0x84000000-0x87ffffff]
+bus: 03 index 2 mmio: [0x0-0x3ffffff]
+bus: 03 index 3 mmio: [0x80000000-0x83ffffff]
NET: Registered protocol family 2
-Switched to high resolution mode on CPU 1
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
-Switched to high resolution mode on CPU 0
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
+Switched to high resolution mode on CPU 1
+Switched to high resolution mode on CPU 0
NET: Registered protocol family 1
checking if image is initramfs... it is
-Freeing initrd memory: 5340k freed
+Freeing initrd memory: 5342k freed
audit: initializing netlink socket (disabled)
-type=2000 audit(1225705229.141:1): initialized
+type=2000 audit(1228190448.133:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3965
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
-pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X
+pcieport-driver 0000:00:1c.0: irq 511 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
-pcieport-driver 0000:00:1c.1: irq 46 for MSI/MSI-X
+pcieport-driver 0000:00:1c.1: irq 510 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004100000, using 3072k, total 7616k
vesafb: mode is 1024x768x16, linelength=2048, pages=3
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 17) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
-rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs
+rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 17
-rtc_cmos 00:06: setting system clock to 2008-11-03 09:40:30 UTC (1225705230)
-Freeing unused kernel memory: 324k freed
+rtc_cmos 00:06: setting system clock to 2008-12-02 04:00:49 UTC (1228190449)
+Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input0
-ACPI: Transitioning device [C3B1] to D3
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [C3B1] (off)
-ACPI: Transitioning device [C3B2] to D3
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [C3B2] (off)
-ACPI: Transitioning device [C3C8] to D3
fan PNP0C0B:02: registered as cooling_device2
ACPI: Fan [C3C8] (off)
-ACPI: Transitioning device [C3C9] to D3
fan PNP0C0B:03: registered as cooling_device3
ACPI: Fan [C3C9] (off)
-ACPI: Transitioning device [C3CA] to D3
fan PNP0C0B:04: registered as cooling_device4
ACPI: Fan [C3CA] (off)
-ACPI: Transitioning device [C3CB] to D3
fan PNP0C0B:05: registered as cooling_device5
ACPI: Fan [C3CB] (off)
-ACPI: Transitioning device [C3CC] to D3
fan PNP0C0B:06: registered as cooling_device6
ACPI: Fan [C3CC] (off)
ACPI: SSDT 7E7DBD42, 027F (r1 HP Cpu0Ist 3000 INTL 20060317)
ACPI: SSDT 7E7DC046, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
-processor ACPI0007:00: registered as cooling_device7
+processor ACPI_CPU:00: registered as cooling_device7
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7E7DBC7A, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
ACPI: SSDT 7E7DBFC1, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
-processor ACPI0007:01: registered as cooling_device8
+processor ACPI_CPU:01: registered as cooling_device8
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ6] (25 C)
thermal LNXTHERM:02: registered as thermal_zone1
-ACPI: Thermal Zone [TZ0] (45 C)
+ACPI: Thermal Zone [TZ0] (36 C)
thermal LNXTHERM:03: registered as thermal_zone2
-ACPI: Thermal Zone [TZ1] (47 C)
+ACPI: Thermal Zone [TZ1] (39 C)
thermal LNXTHERM:04: registered as thermal_zone3
-ACPI: Thermal Zone [TZ3] (36 C)
+ACPI: Thermal Zone [TZ3] (26 C)
thermal LNXTHERM:05: registered as thermal_zone4
-ACPI: Thermal Zone [TZ4] (30 C)
+ACPI: Thermal Zone [TZ4] (21 C)
thermal LNXTHERM:06: registered as thermal_zone5
-ACPI: Thermal Zone [TZ5] (26 C)
+ACPI: Thermal Zone [TZ5] (0 C)
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
libata version 3.00 loaded.
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: setting latency timer to 64
-e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
+e1000e 0000:00:19.0: irq 509 for MSI/MSI-X
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:06.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
mmc0: SDHCI controller on PCI [0000:02:06.2] using PIO
ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:5e:3b:04
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0648000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000020c0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020e0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: quirky BIOS, skipping spindown on poweroff and hibernation
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
Uniform Multi-Platform E-IDE driver
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2120 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2128 irq 15
ata1.00: ATA-7: SAMSUNG HS122JC, GQ100-04, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA
ata1.01: ATAPI: MATSHITADVD-RAM UJ-852S, 1.02, max MWDMA2
ata1.00: configured for UDMA/100
ata1.01: configured for MWDMA2
ata2: port disabled. ignoring.
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS122JC GQ10 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 <<4>Driver 'sr' needs updating - please use bus_type methods
sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
Clocksource tsc unstable (delta = -96409064 ns)
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usb 2-1: new full speed USB device using uhci_hcd and address 2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210]
usb 2-1: configuration #1 chosen from 1 choice
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [C2BF]
ACPI: AC Adapter [C23B] (off-line)
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [C155]
Registered led device: hp:red:hddprotection
leds-hp-disk driver loaded.
acpi device:02: registered as cooling_device9
input: Video Bus as /class/input/input4
ACPI: WMI: Mapper loaded
ACPI: Video Device [C09A] (multi-head: yes rom: no post: no)
ACPI: Battery Slot [C23D] (battery present)
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: EU
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c9]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
+yenta_cardbus 0000:02:06.0: CardBus bridge, secondary bus 0000:03
+yenta_cardbus 0000:02:06.0: IO window: 0x003000-0x0030ff
+yenta_cardbus 0000:02:06.0: IO window: 0x003400-0x0034ff
+yenta_cardbus 0000:02:06.0: PREFETCH window: 0x84400000-0x847fffff
+yenta_cardbus 0000:02:06.0: MEM window: 0x80000000-0x83ffffff
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cb8, PCI irq 18
yenta_cardbus 0000:02:06.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff
-yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
input: PC Speaker as /class/input/input5
input: PS/2 Generic Mouse as /class/input/input6
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels
iwlagn 0000:10:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /class/input/input7
EXT3 FS on dm-1, internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/main-swap. Priority:-1 extents:1 across:2097144k
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
-iwlagn 0000:10:00.0: irq 44 for MSI/MSI-X
+iwlagn 0000:10:00.0: irq 508 for MSI/MSI-X
iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
wlan0: authenticate with AP 00:14:c1:38:e5:15
wlan0: authenticated
wlan0: associate with AP 00:14:c1:38:e5:15
wlan0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=1)
wlan0: associated
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
wlan0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 on minor 0
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level CPU
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level CPU
groups: 0-1
-hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x006f0900
+e1000e 0000:00:19.0: PCI INT A disabled
+PM: Syncing filesystems ... done.
+Freezing user space processes ... (elapsed 0.00 seconds) done.
+Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
+Suspending console(s) (use no_console_suspend to debug)
+pci 0000:00:02.0: PCI INT A disabled
+sd 0:0:0:0: [sda] Synchronizing SCSI cache
+sd 0:0:0:0: [sda] Stopping disk
+ACPI handle has no context!
+ACPI handle has no context!
+sdhci-pci 0000:02:06.2: PCI INT C disabled
+ACPI handle has no context!
+ACPI handle has no context!
+iwlagn 0000:10:00.0: PCI INT A disabled
+ata2: port disabled. ignoring.
+ata_piix 0000:00:1f.1: PCI INT A disabled
+ehci_hcd 0000:00:1d.7: PCI INT A disabled
+uhci_hcd 0000:00:1d.2: PCI INT C disabled
+uhci_hcd 0000:00:1d.1: PCI INT B disabled
+uhci_hcd 0000:00:1d.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
+ehci_hcd 0000:00:1a.7: PCI INT C disabled
+uhci_hcd 0000:00:1a.1: PCI INT B disabled
+uhci_hcd 0000:00:1a.0: PCI INT A disabled
+ACPI handle has no context!
+ACPI: Preparing to enter system sleep state S3
+Disabling non-boot CPUs ...
+CPU 1 is now offline
+SMP alternatives: switching to UP code
+CPU0 attaching NULL sched-domain.
+CPU1 attaching NULL sched-domain.
+CPU0 attaching NULL sched-domain.
+CPU1 is down
+ricoh-mmc: Suspending.
+ricoh-mmc: Controller is now re-enabled.
+Extended CMOS year: 2000
+x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+Back to C!
+Extended CMOS year: 2000
+ricoh-mmc: Resuming.
+ricoh-mmc: Controller is now disabled.
+Enabling non-boot CPUs ...
+SMP alternatives: switching to SMP code
+Booting processor 1 APIC 0x1 ip 0x6000
+Initializing CPU#1
+Calibrating delay using timer specific routine.. 2660.01 BogoMIPS (lpj=5320031)
+CPU: L1 I cache: 32K, L1 D cache: 32K
+CPU: L2 cache: 2048K
+CPU: Physical Processor ID: 0
+CPU: Processor Core ID: 1
+x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
+CPU1: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
+CPU0 attaching NULL sched-domain.
+Switched to high resolution mode on CPU 1
+CPU0 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 0 1
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 1 0
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 is up
+ACPI: Waking up from system sleep state S3
+APIC error on CPU1: 00(40)
+ACPI: EC: non-query interrupt received, switching to interrupt mode
+pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x2001)
+pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xe0500004)
+pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
+pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
+pci 0000:00:03.0: restoring config space at offset 0x4 (was 0xfed12004, writing 0xe0600004)
+pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+pci 0000:00:03.2: restoring config space at offset 0x8 (was 0x1, writing 0x2031)
+pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0x2021)
+pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0x2019)
+pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0x2011)
+pci 0000:00:03.2: restoring config space at offset 0x4 (was 0x1, writing 0x2009)
+pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00001)
+serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xe0601000)
+serial 0000:00:03.3: restoring config space at offset 0x4 (was 0x1, writing 0x2041)
+serial 0000:00:03.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
+pci 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
+pci 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x2061)
+pci 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xe0640000)
+pci 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
+uhci_hcd 0000:00:1a.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+uhci_hcd 0000:00:1a.0: setting latency timer to 64
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x2081)
+usb usb2: root hub lost power or was reset
+uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+uhci_hcd 0000:00:1a.1: setting latency timer to 64
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x20a1)
+usb usb4: root hub lost power or was reset
+ehci_hcd 0000:00:1a.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+ehci_hcd 0000:00:1a.7: setting latency timer to 64
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0641000)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+HDA Intel 0000:00:1b.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x200000f0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x80800)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xe000e000)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+uhci_hcd 0000:00:1d.0: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x20c1)
+usb usb5: root hub lost power or was reset
+uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
+uhci_hcd 0000:00:1d.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x20e1)
+usb usb6: root hub lost power or was reset
+uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+uhci_hcd 0000:00:1d.2: setting latency timer to 64
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x2101)
+usb usb7: root hub lost power or was reset
+ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+ehci_hcd 0000:00:1d.7: setting latency timer to 64
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0648000)
+pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xe030e010)
+pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22803030)
+pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
+pci 0000:00:1e.0: setting latency timer to 64
+ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x2121)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
+ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ata_piix 0000:00:1f.1: setting latency timer to 64
+ata2: port disabled. ignoring.
+ACPI Exception (exoparg2-0444): AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object [20080926]
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C2C3] (Node ffff88007e01de80), AE_AML_PACKAGE_LIMIT
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C003.C0F6.C3F3._STM] (Node ffff88007e043dc0), AE_AML_PACKAGE_LIMIT
+ata1: ACPI set timing mode failed (status=0x300b)
+iwlagn 0000:10:00.0: enabling device (0000 -> 0002)
+iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+iwlagn 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+iwlagn 0000:10:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)
+iwlagn 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
+iwlagn 0000:10:00.0: irq 509 for MSI/MSI-X
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x3000100, writing 0x580010b)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x34fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x3400)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x30fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x3000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x83fff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x80000000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x847ff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x84400000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xe0100000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
+ohci1394 0000:02:06.1: restoring config space at offset 0xf (was 0x4020200, writing 0x4020205)
+ohci1394 0000:02:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xe0101000)
+ohci1394 0000:02:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+ohci1394 0000:02:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+Registered led device: iwl-phy0:radio
+Registered led device: iwl-phy0:assoc
+Registered led device: iwl-phy0:RX
+Registered led device: iwl-phy0:TX
+ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
+sdhci-pci 0000:02:06.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xe0102000)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
+sd 0:0:0:0: [sda] Starting disk
+ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
+ata1.01: ACPI cmd ef/03:40:00:00:00:b0 filtered out
+ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
+ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
+ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1: EH complete
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+usb 5-2: reset full speed USB device using uhci_hcd and address 2
+usb 2-1: reset full speed USB device using uhci_hcd and address 2
+pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+pci 0000:00:02.0: setting latency timer to 64
+Restarting tasks ... done.
+e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
+e1000e: Copyright (c) 1999-2008 Intel Corporation.
+e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
+e1000e 0000:00:19.0: setting latency timer to 64
+e1000e 0000:00:19.0: irq 508 for MSI/MSI-X
+0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:5e:3b:04
+0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
+0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
+PM: Syncing filesystems ... done.
+Freezing user space processes ... (elapsed 0.00 seconds) done.
+Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
+Suspending console(s) (use no_console_suspend to debug)
+pci 0000:00:02.0: PCI INT A disabled
+sd 0:0:0:0: [sda] Synchronizing SCSI cache
+sd 0:0:0:0: [sda] Stopping disk
+ACPI handle has no context!
+ACPI handle has no context!
+sdhci-pci 0000:02:06.2: PCI INT C disabled
+ACPI handle has no context!
+ACPI handle has no context!
+iwlagn 0000:10:00.0: PCI INT A disabled
+ata2: port disabled. ignoring.
+ata_piix 0000:00:1f.1: PCI INT A disabled
+ehci_hcd 0000:00:1d.7: PCI INT A disabled
+uhci_hcd 0000:00:1d.2: PCI INT C disabled
+uhci_hcd 0000:00:1d.1: PCI INT B disabled
+uhci_hcd 0000:00:1d.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
+ehci_hcd 0000:00:1a.7: PCI INT C disabled
+uhci_hcd 0000:00:1a.1: PCI INT B disabled
+uhci_hcd 0000:00:1a.0: PCI INT A disabled
+e1000e 0000:00:19.0: PME# enabled
+e1000e 0000:00:19.0: wake-up capability enabled by ACPI
+e1000e 0000:00:19.0: PME# enabled
+e1000e 0000:00:19.0: wake-up capability enabled by ACPI
+e1000e 0000:00:19.0: PCI INT A disabled
+ACPI handle has no context!
+ACPI: Preparing to enter system sleep state S3
+Disabling non-boot CPUs ...
+CPU 1 is now offline
+SMP alternatives: switching to UP code
+CPU0 attaching NULL sched-domain.
+CPU1 attaching NULL sched-domain.
+CPU0 attaching NULL sched-domain.
+CPU1 is down
+ricoh-mmc: Suspending.
+ricoh-mmc: Controller is now re-enabled.
+Extended CMOS year: 2000
+x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+Back to C!
+Extended CMOS year: 2000
+ricoh-mmc: Resuming.
+ricoh-mmc: Controller is now disabled.
+Enabling non-boot CPUs ...
+SMP alternatives: switching to SMP code
+Booting processor 1 APIC 0x1 ip 0x6000
+Initializing CPU#1
+Calibrating delay using timer specific routine.. 2660.06 BogoMIPS (lpj=5320131)
+CPU: L1 I cache: 32K, L1 D cache: 32K
+CPU: L2 cache: 2048K
+CPU: Physical Processor ID: 0
+CPU: Processor Core ID: 1
+x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
+CPU1: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
+CPU0 attaching NULL sched-domain.
+Switched to high resolution mode on CPU 1
+CPU0 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 0 1
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 1 0
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 is up
+ACPI: Waking up from system sleep state S3
+APIC error on CPU1: 00(40)
+ACPI: EC: non-query interrupt received, switching to interrupt mode
+pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x2001)
+pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xe0500004)
+pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
+pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
+pci 0000:00:03.0: restoring config space at offset 0x4 (was 0xfed12004, writing 0xe0600004)
+pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
+pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+pci 0000:00:03.2: restoring config space at offset 0x8 (was 0x1, writing 0x2031)
+pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0x2021)
+pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0x2019)
+pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0x2011)
+pci 0000:00:03.2: restoring config space at offset 0x4 (was 0x1, writing 0x2009)
+pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00001)
+serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xe0601000)
+serial 0000:00:03.3: restoring config space at offset 0x4 (was 0x1, writing 0x2041)
+serial 0000:00:03.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
+e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
+e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x2061)
+e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xe0640000)
+e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
+e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
+e1000e 0000:00:19.0: setting latency timer to 64
+e1000e 0000:00:19.0: wake-up capability disabled by ACPI
+e1000e 0000:00:19.0: PME# disabled
+e1000e 0000:00:19.0: wake-up capability disabled by ACPI
+e1000e 0000:00:19.0: PME# disabled
+e1000e 0000:00:19.0: irq 509 for MSI/MSI-X
+uhci_hcd 0000:00:1a.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+uhci_hcd 0000:00:1a.0: setting latency timer to 64
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x2081)
+usb usb2: root hub lost power or was reset
+uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+uhci_hcd 0000:00:1a.1: setting latency timer to 64
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x20a1)
+usb usb4: root hub lost power or was reset
+ehci_hcd 0000:00:1a.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+ehci_hcd 0000:00:1a.7: setting latency timer to 64
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0641000)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+HDA Intel 0000:00:1b.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x80800)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xe000e000)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+uhci_hcd 0000:00:1d.0: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x20c1)
+usb usb5: root hub lost power or was reset
+uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
+uhci_hcd 0000:00:1d.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x20e1)
+usb usb6: root hub lost power or was reset
+uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+uhci_hcd 0000:00:1d.2: setting latency timer to 64
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x2101)
+usb usb7: root hub lost power or was reset
+ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+ehci_hcd 0000:00:1d.7: setting latency timer to 64
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0648000)
+pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xe030e010)
+pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22803030)
+pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
+pci 0000:00:1e.0: setting latency timer to 64
+ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x2121)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
+ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ata_piix 0000:00:1f.1: setting latency timer to 64
+ata2: port disabled. ignoring.
+ACPI Exception (exoparg2-0444): AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object [20080926]
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C2C3] (Node ffff88007e01de80), AE_AML_PACKAGE_LIMIT
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C003.C0F6.C3F3._STM] (Node ffff88007e043dc0), AE_AML_PACKAGE_LIMIT
+ata1: ACPI set timing mode failed (status=0x300b)
+iwlagn 0000:10:00.0: enabling device (0000 -> 0002)
+iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+iwlagn 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+iwlagn 0000:10:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)
+iwlagn 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
+iwlagn 0000:10:00.0: irq 508 for MSI/MSI-X
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x3000100, writing 0x580010b)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x34fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x3400)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x30fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x3000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x83fff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x80000000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x847ff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x84400000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xe0100000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
+ohci1394 0000:02:06.1: restoring config space at offset 0xf (was 0x4020200, writing 0x4020205)
+ohci1394 0000:02:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xe0101000)
+ohci1394 0000:02:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+ohci1394 0000:02:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
+sdhci-pci 0000:02:06.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xe0102000)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
+Registered led device: iwl-phy0:radio
+Registered led device: iwl-phy0:assoc
+Registered led device: iwl-phy0:RX
+Registered led device: iwl-phy0:TX
+sd 0:0:0:0: [sda] Starting disk
+ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
+ata1.01: ACPI cmd ef/03:40:00:00:00:b0 filtered out
+ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
+ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
+ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1: EH complete
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+usb 5-2: reset full speed USB device using uhci_hcd and address 2
+usb 2-1: reset full speed USB device using uhci_hcd and address 2
+pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+pci 0000:00:02.0: setting latency timer to 64
+Restarting tasks ... done.
+PM: Syncing filesystems ... done.
+Freezing user space processes ... (elapsed 0.00 seconds) done.
+Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
+Suspending console(s) (use no_console_suspend to debug)
+pci 0000:00:02.0: PCI INT A disabled
+sd 0:0:0:0: [sda] Synchronizing SCSI cache
+sd 0:0:0:0: [sda] Stopping disk
+ACPI handle has no context!
+ACPI handle has no context!
+sdhci-pci 0000:02:06.2: PCI INT C disabled
+ACPI handle has no context!
+ACPI handle has no context!
+iwlagn 0000:10:00.0: PCI INT A disabled
+ata2: port disabled. ignoring.
+ata_piix 0000:00:1f.1: PCI INT A disabled
+ehci_hcd 0000:00:1d.7: PCI INT A disabled
+uhci_hcd 0000:00:1d.2: PCI INT C disabled
+uhci_hcd 0000:00:1d.1: PCI INT B disabled
+uhci_hcd 0000:00:1d.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
+ehci_hcd 0000:00:1a.7: PCI INT C disabled
+uhci_hcd 0000:00:1a.1: PCI INT B disabled
+uhci_hcd 0000:00:1a.0: PCI INT A disabled
+e1000e 0000:00:19.0: PME# enabled
+e1000e 0000:00:19.0: wake-up capability enabled by ACPI
+e1000e 0000:00:19.0: PME# enabled
+e1000e 0000:00:19.0: wake-up capability enabled by ACPI
+e1000e 0000:00:19.0: PCI INT A disabled
+ACPI handle has no context!
+ACPI: Preparing to enter system sleep state S3
+Disabling non-boot CPUs ...
+CPU 1 is now offline
+SMP alternatives: switching to UP code
+CPU0 attaching NULL sched-domain.
+CPU1 attaching NULL sched-domain.
+CPU0 attaching NULL sched-domain.
+CPU1 is down
+ricoh-mmc: Suspending.
+ricoh-mmc: Controller is now re-enabled.
+Extended CMOS year: 2000
+x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+Back to C!
+Extended CMOS year: 2000
+ricoh-mmc: Resuming.
+ricoh-mmc: Controller is now disabled.
+Enabling non-boot CPUs ...
+SMP alternatives: switching to SMP code
+Booting processor 1 APIC 0x1 ip 0x6000
+Initializing CPU#1
+Calibrating delay using timer specific routine.. 2660.08 BogoMIPS (lpj=5320176)
+CPU: L1 I cache: 32K, L1 D cache: 32K
+CPU: L2 cache: 2048K
+CPU: Physical Processor ID: 0
+CPU: Processor Core ID: 1
+x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
+CPU1: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
+CPU0 attaching NULL sched-domain.
+Switched to high resolution mode on CPU 1
+CPU0 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 0 1
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 1 0
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 is up
+ACPI: Waking up from system sleep state S3
+APIC error on CPU1: 00(40)
+ACPI: EC: non-query interrupt received, switching to interrupt mode
+pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x2001)
+pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xe0500004)
+pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
+pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
+pci 0000:00:03.0: restoring config space at offset 0x4 (was 0xfed12004, writing 0xe0600004)
+pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
+pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+pci 0000:00:03.2: restoring config space at offset 0x8 (was 0x1, writing 0x2031)
+pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0x2021)
+pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0x2019)
+pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0x2011)
+pci 0000:00:03.2: restoring config space at offset 0x4 (was 0x1, writing 0x2009)
+pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00001)
+serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xe0601000)
+serial 0000:00:03.3: restoring config space at offset 0x4 (was 0x1, writing 0x2041)
+serial 0000:00:03.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
+e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
+e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x2061)
+e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xe0640000)
+e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
+e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
+e1000e 0000:00:19.0: setting latency timer to 64
+e1000e 0000:00:19.0: wake-up capability disabled by ACPI
+e1000e 0000:00:19.0: PME# disabled
+e1000e 0000:00:19.0: wake-up capability disabled by ACPI
+e1000e 0000:00:19.0: PME# disabled
+e1000e 0000:00:19.0: irq 509 for MSI/MSI-X
+uhci_hcd 0000:00:1a.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+uhci_hcd 0000:00:1a.0: setting latency timer to 64
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x2081)
+usb usb2: root hub lost power or was reset
+uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+uhci_hcd 0000:00:1a.1: setting latency timer to 64
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x20a1)
+usb usb4: root hub lost power or was reset
+ehci_hcd 0000:00:1a.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+ehci_hcd 0000:00:1a.7: setting latency timer to 64
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0641000)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+HDA Intel 0000:00:1b.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x80800)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xe000e000)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+uhci_hcd 0000:00:1d.0: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x20c1)
+usb usb5: root hub lost power or was reset
+uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
+uhci_hcd 0000:00:1d.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x20e1)
+usb usb6: root hub lost power or was reset
+uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+uhci_hcd 0000:00:1d.2: setting latency timer to 64
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x2101)
+usb usb7: root hub lost power or was reset
+ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+ehci_hcd 0000:00:1d.7: setting latency timer to 64
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0648000)
+pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xe030e010)
+pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22803030)
+pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
+pci 0000:00:1e.0: setting latency timer to 64
+ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x2121)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
+ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ata_piix 0000:00:1f.1: setting latency timer to 64
+ata2: port disabled. ignoring.
+ACPI Exception (exoparg2-0444): AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object [20080926]
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C2C3] (Node ffff88007e01de80), AE_AML_PACKAGE_LIMIT
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C003.C0F6.C3F3._STM] (Node ffff88007e043dc0), AE_AML_PACKAGE_LIMIT
+ata1: ACPI set timing mode failed (status=0x300b)
+iwlagn 0000:10:00.0: enabling device (0000 -> 0002)
+iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+iwlagn 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+iwlagn 0000:10:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)
+iwlagn 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
+iwlagn 0000:10:00.0: irq 508 for MSI/MSI-X
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x3000100, writing 0x580010b)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x34fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x3400)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x30fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x3000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x83fff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x80000000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x847ff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x84400000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xe0100000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
+ohci1394 0000:02:06.1: restoring config space at offset 0xf (was 0x4020200, writing 0x4020205)
+ohci1394 0000:02:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xe0101000)
+ohci1394 0000:02:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+ohci1394 0000:02:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+Registered led device: iwl-phy0:radio
+Registered led device: iwl-phy0:assoc
+Registered led device: iwl-phy0:RX
+Registered led device: iwl-phy0:TX
+ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
+sdhci-pci 0000:02:06.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xe0102000)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
+sd 0:0:0:0: [sda] Starting disk
+ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
+ata1.01: ACPI cmd ef/03:40:00:00:00:b0 filtered out
+ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
+ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
+ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1: EH complete
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+usb 5-2: reset full speed USB device using uhci_hcd and address 2
+usb 2-1: reset full speed USB device using uhci_hcd and address 2
+pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+pci 0000:00:02.0: setting latency timer to 64
+Restarting tasks ... done.
+PM: Syncing filesystems ... done.
+Freezing user space processes ... (elapsed 0.01 seconds) done.
+Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
+Suspending console(s) (use no_console_suspend to debug)
+pci 0000:00:02.0: PCI INT A disabled
+sd 0:0:0:0: [sda] Synchronizing SCSI cache
+sd 0:0:0:0: [sda] Stopping disk
+ACPI handle has no context!
+ACPI handle has no context!
+sdhci-pci 0000:02:06.2: PCI INT C disabled
+ACPI handle has no context!
+ACPI handle has no context!
+iwlagn 0000:10:00.0: PCI INT A disabled
+ata2: port disabled. ignoring.
+ata_piix 0000:00:1f.1: PCI INT A disabled
+ehci_hcd 0000:00:1d.7: PCI INT A disabled
+uhci_hcd 0000:00:1d.2: PCI INT C disabled
+uhci_hcd 0000:00:1d.1: PCI INT B disabled
+uhci_hcd 0000:00:1d.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: PCI INT A disabled
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
+ehci_hcd 0000:00:1a.7: PCI INT C disabled
+uhci_hcd 0000:00:1a.1: PCI INT B disabled
+uhci_hcd 0000:00:1a.0: PCI INT A disabled
+e1000e 0000:00:19.0: PME# enabled
+e1000e 0000:00:19.0: wake-up capability enabled by ACPI
+e1000e 0000:00:19.0: PME# enabled
+e1000e 0000:00:19.0: wake-up capability enabled by ACPI
+e1000e 0000:00:19.0: PCI INT A disabled
+ACPI handle has no context!
+ACPI: Preparing to enter system sleep state S3
+Disabling non-boot CPUs ...
+CPU 1 is now offline
+SMP alternatives: switching to UP code
+CPU0 attaching NULL sched-domain.
+CPU1 attaching NULL sched-domain.
+CPU0 attaching NULL sched-domain.
+CPU1 is down
+ricoh-mmc: Suspending.
+ricoh-mmc: Controller is now re-enabled.
+Extended CMOS year: 2000
+x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+Back to C!
+Extended CMOS year: 2000
+ricoh-mmc: Resuming.
+ricoh-mmc: Controller is now disabled.
+Enabling non-boot CPUs ...
+SMP alternatives: switching to SMP code
+Booting processor 1 APIC 0x1 ip 0x6000
+Initializing CPU#1
+Calibrating delay using timer specific routine.. 2659.98 BogoMIPS (lpj=5319972)
+CPU: L1 I cache: 32K, L1 D cache: 32K
+CPU: L2 cache: 2048K
+CPU: Physical Processor ID: 0
+CPU: Processor Core ID: 1
+x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
+CPU1: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
+CPU0 attaching NULL sched-domain.
+Switched to high resolution mode on CPU 1
+CPU0 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 0 1
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 attaching sched-domain:
+ domain 0: span 0-1 level MC
+ groups: 1 0
+ domain 1: span 0-1 level CPU
+ groups: 0-1
+CPU1 is up
+ACPI: Waking up from system sleep state S3
+APIC error on CPU1: 00(40)
+ACPI: EC: non-query interrupt received, switching to interrupt mode
+pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x2001)
+pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xe0500004)
+pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
+pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
+pci 0000:00:03.0: restoring config space at offset 0x4 (was 0xfed12004, writing 0xe0600004)
+pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
+pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+pci 0000:00:03.2: restoring config space at offset 0x8 (was 0x1, writing 0x2031)
+pci 0000:00:03.2: restoring config space at offset 0x7 (was 0x1, writing 0x2021)
+pci 0000:00:03.2: restoring config space at offset 0x6 (was 0x1, writing 0x2019)
+pci 0000:00:03.2: restoring config space at offset 0x5 (was 0x1, writing 0x2011)
+pci 0000:00:03.2: restoring config space at offset 0x4 (was 0x1, writing 0x2009)
+pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00001)
+serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+serial 0000:00:03.3: restoring config space at offset 0x5 (was 0x0, writing 0xe0601000)
+serial 0000:00:03.3: restoring config space at offset 0x4 (was 0x1, writing 0x2041)
+serial 0000:00:03.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
+e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
+e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x2061)
+e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xe0640000)
+e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
+e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
+e1000e 0000:00:19.0: setting latency timer to 64
+e1000e 0000:00:19.0: wake-up capability disabled by ACPI
+e1000e 0000:00:19.0: PME# disabled
+e1000e 0000:00:19.0: wake-up capability disabled by ACPI
+e1000e 0000:00:19.0: PME# disabled
+e1000e 0000:00:19.0: irq 509 for MSI/MSI-X
+uhci_hcd 0000:00:1a.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+uhci_hcd 0000:00:1a.0: setting latency timer to 64
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x2081)
+usb usb2: root hub lost power or was reset
+uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+uhci_hcd 0000:00:1a.1: setting latency timer to 64
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
+uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x20a1)
+usb usb4: root hub lost power or was reset
+ehci_hcd 0000:00:1a.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+ehci_hcd 0000:00:1a.7: setting latency timer to 64
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0641000)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
+HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+HDA Intel 0000:00:1b.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x80800)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.0: setting latency timer to 64
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xe000e000)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
+pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
+pcieport-driver 0000:00:1c.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+uhci_hcd 0000:00:1d.0: setting latency timer to 64
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x20c1)
+usb usb5: root hub lost power or was reset
+uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
+uhci_hcd 0000:00:1d.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
+uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x20e1)
+usb usb6: root hub lost power or was reset
+uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
+uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+uhci_hcd 0000:00:1d.2: setting latency timer to 64
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
+uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x2101)
+usb usb7: root hub lost power or was reset
+ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
+ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
+ehci_hcd 0000:00:1d.7: setting latency timer to 64
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe0648000)
+pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
+pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xe030e010)
+pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22803030)
+pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
+pci 0000:00:1e.0: setting latency timer to 64
+ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x2121)
+ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
+ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ata_piix 0000:00:1f.1: setting latency timer to 64
+ata2: port disabled. ignoring.
+ACPI Exception (exoparg2-0444): AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object [20080926]
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C2C3] (Node ffff88007e01de80), AE_AML_PACKAGE_LIMIT
+ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.C003.C0F6.C3F3._STM] (Node ffff88007e043dc0), AE_AML_PACKAGE_LIMIT
+ata1: ACPI set timing mode failed (status=0x300b)
+iwlagn 0000:10:00.0: enabling device (0000 -> 0002)
+iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+iwlagn 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
+iwlagn 0000:10:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)
+iwlagn 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
+iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
+iwlagn 0000:10:00.0: irq 508 for MSI/MSI-X
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x3000100, writing 0x580010b)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x34fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x3400)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x30fc)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x3000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x83fff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x80000000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x847ff000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x84400000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xe0100000)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800)
+yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
+ohci1394 0000:02:06.1: restoring config space at offset 0xf (was 0x4020200, writing 0x4020205)
+ohci1394 0000:02:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xe0101000)
+ohci1394 0000:02:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+ohci1394 0000:02:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
+sdhci-pci 0000:02:06.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xe0102000)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
+sdhci-pci 0000:02:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
+sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
+Registered led device: iwl-phy0:radio
+Registered led device: iwl-phy0:assoc
+Registered led device: iwl-phy0:RX
+Registered led device: iwl-phy0:TX
+sd 0:0:0:0: [sda] Starting disk
+ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
+ata1.01: ACPI cmd ef/03:40:00:00:00:b0 filtered out
+ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
+ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
+ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
+ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1.00: configured for UDMA/100
+ata1.01: configured for MWDMA2
+ata1: EH complete
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+usb 5-2: reset full speed USB device using uhci_hcd and address 2
+usb 2-1: reset full speed USB device using uhci_hcd and address 2
+pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+pci 0000:00:02.0: setting latency timer to 64
+Restarting tasks ... <7>wlan0: deauthenticated
+done.
+wlan0: direct probe to AP 00:14:c1:38:e5:15 try 1
+wlan0 direct probe responded
+wlan0: authenticate with AP 00:14:c1:38:e5:15
+wlan0: authenticated
+wlan0: associate with AP 00:14:c1:38:e5:15
+wlan0: RX ReassocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=1)
+wlan0: associated
next prev parent reply other threads:[~2008-12-02 5:29 UTC|newest]
Thread overview: 186+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-02 2:20 Regression from 2.6.26: Hibernation (possibly suspend) broken on Toshiba R500 (bisected) Rafael J. Wysocki
2008-12-02 3:32 ` Linus Torvalds
2008-12-02 3:42 ` Linus Torvalds
2008-12-02 4:31 ` Frans Pop
2008-12-02 4:46 ` Linus Torvalds
2008-12-02 5:29 ` Frans Pop [this message]
2008-12-02 5:56 ` Frans Pop
2008-12-02 15:46 ` Linus Torvalds
2008-12-02 17:46 ` Frans Pop
2008-12-02 18:17 ` Linus Torvalds
2008-12-05 8:53 ` MSI changes in .28 Frans Pop
2008-12-05 9:09 ` Yinghai Lu
2008-12-05 12:20 ` Ingo Molnar
2008-12-05 13:04 ` Eric Dumazet
2008-12-05 17:49 ` H. Peter Anvin
2008-12-02 4:13 ` Regression from 2.6.26: Hibernation (possibly suspend) broken on Toshiba R500 (bisected) Frans Pop
2008-12-02 4:36 ` Linus Torvalds
2008-12-02 22:38 ` Rafael J. Wysocki
2008-12-02 23:37 ` Linus Torvalds
2008-12-03 0:00 ` Rafael J. Wysocki
2008-12-03 0:05 ` Rafael J. Wysocki
2008-12-03 0:31 ` Rafael J. Wysocki
2008-12-03 0:41 ` Linus Torvalds
2008-12-03 1:22 ` Rafael J. Wysocki
2008-12-03 2:02 ` Linus Torvalds
2008-12-03 7:40 ` Rafael J. Wysocki
2008-12-03 7:52 ` Rafael J. Wysocki
2008-12-03 11:20 ` Rafael J. Wysocki
2008-12-03 15:53 ` Linus Torvalds
2008-12-04 1:23 ` Rafael J. Wysocki
2008-12-04 4:40 ` Linus Torvalds
2008-12-04 8:21 ` Frans Pop
2008-12-04 22:01 ` Rafael J. Wysocki
2008-12-04 11:29 ` Frans Pop
2008-12-04 16:17 ` Linus Torvalds
2008-12-04 18:00 ` Frans Pop
2008-12-04 20:03 ` Linus Torvalds
2008-12-05 21:26 ` Linus Torvalds
2008-12-05 22:01 ` Rafael J. Wysocki
2008-12-05 22:14 ` Linus Torvalds
2008-12-06 0:04 ` Rafael J. Wysocki
2008-12-06 0:50 ` Linus Torvalds
2008-12-06 1:18 ` Rafael J. Wysocki
2008-12-06 1:55 ` Linus Torvalds
2008-12-06 2:18 ` Rafael J. Wysocki
2008-12-06 13:53 ` Rafael J. Wysocki
2008-12-06 2:45 ` Greg KH
2009-01-28 12:00 ` Frans Pop
2009-01-29 14:11 ` Ingo Molnar
2009-01-29 14:48 ` Rafael J. Wysocki
2009-01-29 16:44 ` Alexey Starikovskiy
2009-01-30 4:35 ` Frans Pop
2008-12-06 9:20 ` [patch,rfc] usb: restore config before enabling device on resume Frans Pop
2008-12-06 13:48 ` Rafael J. Wysocki
2008-12-06 15:02 ` Frans Pop
2008-12-10 14:06 ` "APIC error on CPU1: 00(40)" during resume (was: Regression from 2.6.26: Hibernation (possibly suspend) broken on Toshiba R500) Frans Pop
2008-12-10 15:51 ` Linus Torvalds
2008-12-10 16:05 ` Frans Pop
2008-12-10 16:26 ` Linus Torvalds
2008-12-10 16:52 ` Matthew Garrett
2008-12-10 17:13 ` Linus Torvalds
2008-12-10 17:33 ` Ingo Molnar
2008-12-10 18:41 ` Maxim Levitsky
2008-12-20 21:31 ` "APIC error on CPU1: 00(40)" during resume Frans Pop
2008-12-21 8:29 ` Ingo Molnar
2008-12-23 4:28 ` Len Brown
2008-12-04 22:46 ` Regression from 2.6.26: Hibernation (possibly suspend) broken on Toshiba R500 (bisected) Rafael J. Wysocki
2008-12-04 22:40 ` Rafael J. Wysocki
2008-12-04 23:22 ` Linus Torvalds
2008-12-04 23:45 ` Rafael J. Wysocki
2008-12-05 0:07 ` Linus Torvalds
2008-12-05 0:20 ` Rafael J. Wysocki
2008-12-05 6:55 ` Frans Pop
2008-12-04 22:09 ` Rafael J. Wysocki
2008-12-04 22:20 ` Linus Torvalds
2008-12-04 23:31 ` Rafael J. Wysocki
2008-12-05 0:03 ` Linus Torvalds
2008-12-05 0:45 ` Linus Torvalds
2008-12-05 1:08 ` Rafael J. Wysocki
2008-12-05 1:45 ` Linus Torvalds
2008-12-05 2:55 ` Linus Torvalds
2008-12-05 3:25 ` Linus Torvalds
2008-12-05 6:44 ` Frans Pop
2008-12-05 8:27 ` Frans Pop
2008-12-05 12:00 ` Rafael J. Wysocki
2008-12-05 15:57 ` Linus Torvalds
2008-12-05 21:32 ` Rafael J. Wysocki
2008-12-05 17:25 ` Jesse Barnes
2008-12-02 15:49 ` Rafael J. Wysocki
2008-12-06 14:05 ` [PATCH 0/3] Fix hibernation regression on Toshiba Portege R500 Rafael J. Wysocki
2008-12-06 14:05 ` Rafael J. Wysocki
2008-12-06 14:07 ` [PATCH 1/3] PCI: Rework default handling of suspend and resume Rafael J. Wysocki
2008-12-06 14:07 ` Rafael J. Wysocki
2008-12-06 17:07 ` Linus Torvalds
2008-12-06 17:22 ` Rafael J. Wysocki
2008-12-06 17:22 ` Rafael J. Wysocki
2008-12-06 17:33 ` Linus Torvalds
2008-12-06 17:33 ` Linus Torvalds
2008-12-06 17:43 ` Rafael J. Wysocki
2008-12-06 18:00 ` Linus Torvalds
2008-12-06 18:00 ` Linus Torvalds
2008-12-06 21:24 ` Rafael J. Wysocki
2008-12-06 21:24 ` Rafael J. Wysocki
2008-12-07 4:44 ` Jesse Barnes
2008-12-07 4:44 ` Jesse Barnes
2008-12-07 5:41 ` Greg KH
2008-12-07 12:47 ` Rafael J. Wysocki
2008-12-07 16:44 ` Linus Torvalds
2008-12-07 21:02 ` Rafael J. Wysocki
2008-12-07 21:02 ` Rafael J. Wysocki
2008-12-07 16:44 ` Linus Torvalds
2008-12-07 17:26 ` Greg KH
2008-12-07 17:26 ` Greg KH
2008-12-07 23:34 ` [PATCH 1/3] PCI: Rework default handling of suspend and resume (rebased) Rafael J. Wysocki
2008-12-07 23:34 ` Rafael J. Wysocki
2008-12-07 12:47 ` [PATCH 1/3] PCI: Rework default handling of suspend and resume Rafael J. Wysocki
2008-12-07 5:41 ` Greg KH
2008-12-06 18:30 ` Alan Stern
2008-12-06 18:30 ` [linux-pm] " Alan Stern
2008-12-06 21:36 ` Rafael J. Wysocki
2008-12-06 21:36 ` [linux-pm] " Rafael J. Wysocki
2008-12-06 22:24 ` Linus Torvalds
2008-12-06 23:25 ` Arjan van de Ven
2008-12-06 23:35 ` Alan Cox
2008-12-06 23:35 ` [linux-pm] " Alan Cox
2008-12-07 6:00 ` Linus Torvalds
2008-12-07 6:00 ` [linux-pm] " Linus Torvalds
2008-12-07 6:03 ` Linus Torvalds
2008-12-07 6:03 ` [linux-pm] " Linus Torvalds
2008-12-07 13:39 ` Rafael J. Wysocki
2008-12-07 13:39 ` [linux-pm] " Rafael J. Wysocki
2008-12-07 16:34 ` Linus Torvalds
2008-12-14 9:28 ` Pavel Machek
2008-12-14 9:28 ` [linux-pm] " Pavel Machek
2008-12-07 16:34 ` Linus Torvalds
2008-12-07 17:18 ` Arjan van de Ven
2008-12-07 17:18 ` [linux-pm] " Arjan van de Ven
2008-12-07 9:44 ` Takashi Iwai
2008-12-07 12:30 ` Rafael J. Wysocki
2008-12-07 9:44 ` Takashi Iwai
2008-12-06 23:25 ` Arjan van de Ven
2008-12-06 22:24 ` Linus Torvalds
2008-12-07 0:02 ` [linux-pm] " Alan Stern
2008-12-07 13:14 ` Rafael J. Wysocki
2008-12-07 13:14 ` [linux-pm] " Rafael J. Wysocki
2008-12-07 0:02 ` Alan Stern
2008-12-08 22:13 ` USB suspend and resume for PCI host controllers Alan Stern
2008-12-06 21:09 ` [PATCH 1/3] PCI: Rework default handling of suspend and resume Alan Cox
2008-12-06 21:09 ` Alan Cox
2008-12-06 21:50 ` Rafael J. Wysocki
2008-12-06 21:50 ` Rafael J. Wysocki
2008-12-06 17:43 ` Rafael J. Wysocki
2008-12-06 17:07 ` Linus Torvalds
2008-12-06 14:07 ` [PATCH 2/3] PCI: Suspend and resume PCI Express ports with interrupts disabled Rafael J. Wysocki
2008-12-06 14:07 ` Rafael J. Wysocki
2008-12-06 17:15 ` Linus Torvalds
2008-12-06 17:25 ` Rafael J. Wysocki
2008-12-06 17:25 ` Rafael J. Wysocki
2008-12-06 17:38 ` Linus Torvalds
2008-12-06 17:46 ` Rafael J. Wysocki
2008-12-07 2:18 ` Jesse Barnes
2008-12-07 2:18 ` Jesse Barnes
2008-12-07 12:53 ` Rafael J. Wysocki
2008-12-07 12:53 ` Rafael J. Wysocki
2008-12-06 17:46 ` Rafael J. Wysocki
2008-12-06 17:38 ` Linus Torvalds
2008-12-06 17:15 ` Linus Torvalds
2008-12-06 14:09 ` [PATCH 3/3] Sound (HDA Intel): Restore PCI configuration space with interrupts off Rafael J. Wysocki
2008-12-06 14:09 ` Rafael J. Wysocki
2008-12-07 4:45 ` Jesse Barnes
2008-12-07 9:47 ` Takashi Iwai
2008-12-11 7:07 ` Takashi Iwai
2008-12-11 20:03 ` Rafael J. Wysocki
2008-12-11 20:03 ` Rafael J. Wysocki
2008-12-11 20:27 ` Takashi Iwai
2008-12-11 20:27 ` Takashi Iwai
2008-12-11 20:38 ` Rafael J. Wysocki
2008-12-12 6:32 ` Takashi Iwai
2008-12-12 6:32 ` Takashi Iwai
2008-12-11 20:38 ` Rafael J. Wysocki
2008-12-11 7:07 ` Takashi Iwai
2008-12-07 9:47 ` Takashi Iwai
2008-12-07 4:45 ` Jesse Barnes
2008-12-06 19:30 ` [PATCH 0/3] Fix hibernation regression on Toshiba Portege R500 Frans Pop
2008-12-06 19:30 ` Frans Pop
-- strict thread matches above, loose matches on Subject: below --
2008-12-02 7:53 Regression from 2.6.26: Hibernation (possibly suspend) broken on Toshiba R500 (bisected) Frans Pop
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812020629.26714.elendil@planet.nl \
--to=elendil@planet.nl \
--cc=akpm@linux-foundation.org \
--cc=greg@kroah.com \
--cc=ink@jurassic.park.msu.ru \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rjw@sisk.pl \
--cc=tiwai@suse.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.