* [PATCH 1/2] powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support
2009-01-05 17:40 [PATCH v4 0/2] MPC83xx PCI-E support Anton Vorontsov
@ 2009-01-05 17:41 ` Anton Vorontsov
2009-01-05 17:41 ` [PATCH 2/2] powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E Anton Vorontsov
1 sibling, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2009-01-05 17:41 UTC (permalink / raw)
To: Kumar Gala; +Cc: Huang Changming, Liu Dave, linuxppc-dev
This patch adds support for PCI-Express controllers as found on the
newer MPC83xx chips.
The work is loosely based on the Tony Li's patch[1], but unlike the
original patch, this patch implements sliding window for the Type 1
transactions using outbound window translations, so we don't have to
ioremap the whole PCI-E configuration space.
[1] http://ozlabs.org/pipermail/linuxppc-dev/2008-January/049028.html
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/sysdev/fsl_pci.c | 238 ++++++++++++++++++++++++++++++++++++----
include/linux/pci_ids.h | 8 ++
2 files changed, 222 insertions(+), 24 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index f611d03..c934485 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1,12 +1,16 @@
/*
* MPC83xx/85xx/86xx PCI/PCIE support routing.
*
- * Copyright 2007,2008 Freescale Semiconductor, Inc
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 MontaVista Software, Inc.
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
* Recode: ZHANG WEI <wei.zhang@freescale.com>
* Rewrite the routing for Frescale PCI and PCI Express
* Roy Zang <tie-fei.zang@freescale.com>
+ * MPC83xx PCI-Express support:
+ * Tony Li <tony.li@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -27,6 +31,29 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+static int fsl_pcie_bus_fixup;
+
+static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+{
+ /* if we aren't a PCIe don't bother */
+ if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
+ return;
+
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+ fsl_pcie_bus_fixup = 1;
+ return;
+}
+
+static int __init fsl_pcie_check_link(struct pci_controller *hose)
+{
+ u32 val;
+
+ early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
+ if (val < PCIE_LTSSM_L0)
+ return 1;
+ return 0;
+}
+
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
/* atmu setup for fsl pci/pcie controller */
static void __init setup_pci_atmu(struct pci_controller *hose,
@@ -118,28 +145,6 @@ static void __init setup_pci_pcsrbar(struct pci_controller *hose)
#endif
}
-static int fsl_pcie_bus_fixup;
-
-static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
-{
- /* if we aren't a PCIe don't bother */
- if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
- return ;
-
- dev->class = PCI_CLASS_BRIDGE_PCI << 8;
- fsl_pcie_bus_fixup = 1;
- return ;
-}
-
-static int __init fsl_pcie_check_link(struct pci_controller *hose)
-{
- u32 val;
- early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
- if (val < PCIE_LTSSM_L0)
- return 1;
- return 0;
-}
-
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
@@ -253,8 +258,183 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header);
+
+struct mpc83xx_pcie_priv {
+ void __iomem *cfg_map;
+ u32 dev_base;
+};
+
+/*
+ * With the convention of u-boot, the PCIE outbound window 0 serves
+ * as configuration transactions outbound.
+ */
+#define PEX_OUTWIN0_BAR 0xCA4
+#define PEX_OUTWIN0_TAL 0xCA8
+#define PEX_OUTWIN0_TAH 0xCAC
+
+static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
+{
+ struct pci_controller *hose = bus->sysdata;
+
+ if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Workaround for the HW bug: for Type 0 configure transactions the
+ * PCI-E controller does not check the device number bits and just
+ * assumes that the device number bits are 0.
+ */
+ if (bus->number == hose->first_busno ||
+ bus->primary == hose->first_busno) {
+ if (devfn & 0xf8)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ if (ppc_md.pci_exclude_device) {
+ if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
+ unsigned int devfn, int offset)
+{
+ struct pci_controller *hose = bus->sysdata;
+ struct mpc83xx_pcie_priv *pcie = hose->dn->data;
+ u8 bus_no = bus->number - hose->first_busno;
+ u32 dev_base = bus_no << 24 | devfn << 16;
+ int ret;
+
+ ret = mpc83xx_pcie_exclude_device(bus, devfn);
+ if (ret)
+ return NULL;
+
+ offset &= 0xfff;
+
+ /* Type 0 */
+ if (bus->number == hose->first_busno)
+ return hose->cfg_data + offset;
+
+ if (pcie->dev_base == dev_base)
+ goto mapped;
+
+ out_le32(hose->cfg_data + PEX_OUTWIN0_TAL, dev_base);
+
+ pcie->dev_base = dev_base;
+mapped:
+ return pcie->cfg_map + offset;
+}
+
+static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ void __iomem *cfg_addr;
+
+ cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
+ if (!cfg_addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (len) {
+ case 1:
+ *val = in_8(cfg_addr);
+ break;
+ case 2:
+ *val = in_le16(cfg_addr);
+ break;
+ default:
+ *val = in_le32(cfg_addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ void __iomem *cfg_addr;
+
+ cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
+ if (!cfg_addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (len) {
+ case 1:
+ out_8(cfg_addr, val);
+ break;
+ case 2:
+ out_le16(cfg_addr, val);
+ break;
+ default:
+ out_le32(cfg_addr, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mpc83xx_pcie_ops = {
+ .read = mpc83xx_pcie_read_config,
+ .write = mpc83xx_pcie_write_config,
+};
+
+static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
+ struct resource *reg)
+{
+ struct mpc83xx_pcie_priv *pcie;
+ u32 cfg_bar;
+ int ret = -ENOMEM;
+
+ pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return ret;
+
+ hose->cfg_data = ioremap(reg->start, resource_size(reg));
+ if (!hose->cfg_data)
+ goto err0;
+
+ cfg_bar = in_le32(hose->cfg_data + PEX_OUTWIN0_BAR);
+ if (!cfg_bar) {
+ /* PCI-E isn't configured. */
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ pcie->cfg_map = ioremap(cfg_bar, 0x1000);
+ if (!pcie->cfg_map)
+ goto err1;
+
+ WARN_ON(hose->dn->data);
+ hose->dn->data = pcie;
+ hose->ops = &mpc83xx_pcie_ops;
+
+ out_le32(hose->cfg_data + PEX_OUTWIN0_TAH, 0);
+ out_le32(hose->cfg_data + PEX_OUTWIN0_TAL, 0);
+
+ if (fsl_pcie_check_link(hose))
+ hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+
+ return 0;
+err1:
+ iounmap(hose->cfg_data);
+err0:
+ kfree(pcie);
+ return ret;
+
+}
+
int __init mpc83xx_add_bridge(struct device_node *dev)
{
+ int ret;
int len;
struct pci_controller *hose;
struct resource rsrc_reg;
@@ -309,7 +489,14 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
- setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0);
+ if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) {
+ ret = mpc83xx_pcie_setup(hose, &rsrc_reg);
+ if (ret)
+ goto err0;
+ } else {
+ setup_indirect_pci(hose, rsrc_cfg.start,
+ rsrc_cfg.start + 4, 0);
+ }
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
@@ -324,5 +511,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
pci_process_bridge_OF_ranges(hose, dev, primary);
return 0;
+err0:
+ pcibios_free_controller(hose);
+ return ret;
}
#endif /* CONFIG_PPC_83xx */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index b6e6944..008c90d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2209,6 +2209,14 @@
#define PCI_DEVICE_ID_TDI_EHCI 0x0101
#define PCI_VENDOR_ID_FREESCALE 0x1957
+#define PCI_DEVICE_ID_MPC8315E 0x00b4
+#define PCI_DEVICE_ID_MPC8315 0x00b5
+#define PCI_DEVICE_ID_MPC8314E 0x00b6
+#define PCI_DEVICE_ID_MPC8314 0x00b7
+#define PCI_DEVICE_ID_MPC8378E 0x00c4
+#define PCI_DEVICE_ID_MPC8378 0x00c5
+#define PCI_DEVICE_ID_MPC8377E 0x00c6
+#define PCI_DEVICE_ID_MPC8377 0x00c7
#define PCI_DEVICE_ID_MPC8548E 0x0012
#define PCI_DEVICE_ID_MPC8548 0x0013
#define PCI_DEVICE_ID_MPC8543E 0x0014
--
1.5.6.5
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/2] powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E
2009-01-05 17:40 [PATCH v4 0/2] MPC83xx PCI-E support Anton Vorontsov
2009-01-05 17:41 ` [PATCH 1/2] powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support Anton Vorontsov
@ 2009-01-05 17:41 ` Anton Vorontsov
2009-01-07 15:19 ` Anton Vorontsov
1 sibling, 1 reply; 5+ messages in thread
From: Anton Vorontsov @ 2009-01-05 17:41 UTC (permalink / raw)
To: Kumar Gala; +Cc: Huang Changming, Liu Dave, linuxppc-dev
This patch adds pcie nodes to the appropriate dts files, plus adds
some probing code for the boards.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8315erdb.dts | 64 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8377_mds.dts | 64 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8377_rdb.dts | 64 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8378_mds.dts | 64 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8378_rdb.dts | 64 +++++++++++++++++++++++++++++
arch/powerpc/platforms/83xx/mpc831x_rdb.c | 2 +
arch/powerpc/platforms/83xx/mpc837x_mds.c | 2 +
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 2 +
8 files changed, 326 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 072c9b0..9a4fa2a 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -22,6 +22,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -349,4 +351,66 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc0000000
+ 0x02000000 0 0xc0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 1d14d70..b12b9b4 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -23,6 +23,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -409,4 +411,66 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc0000000
+ 0x02000000 0 0xc0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 9413af3..1aed6d0 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -22,6 +22,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -350,4 +352,66 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc0000000
+ 0x02000000 0 0xc0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index b85fc02..771bbf4 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -23,6 +23,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -395,4 +397,66 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc0000000
+ 0x02000000 0 0xc0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 23c10ce..68ee09e 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -22,6 +22,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -334,4 +336,66 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc0000000
+ 0x02000000 0 0xc0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 5177bdd..b690fd7 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -38,6 +38,8 @@ static void __init mpc831x_rdb_setup_arch(void)
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
#endif
mpc831x_usb_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 530ef99..33420eb 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -92,6 +92,8 @@ static void __init mpc837x_mds_setup_arch(void)
}
mpc83xx_add_bridge(np);
}
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
#endif
mpc837xmds_usb_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 1d09654..3d7b953 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -38,6 +38,8 @@ static void __init mpc837x_rdb_setup_arch(void)
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
#endif
mpc837x_usb_cfg();
}
--
1.5.6.5
^ permalink raw reply related [flat|nested] 5+ messages in thread