From: Stefan Roese <sr-ynQEQJNshbs@public.gmane.org>
To: avorontsov-hkdhdckH98+B+jHODAdFcQ@public.gmane.org
Cc: david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org,
linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [PATCH v5] spi: Add PPC4xx SPI driver
Date: Tue, 6 Jan 2009 09:14:19 +0100 [thread overview]
Message-ID: <200901060914.19435.sr@denx.de> (raw)
In-Reply-To: <20090106020603.GA14074-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
Hi Anton,
On Tuesday 06 January 2009, Anton Vorontsov wrote:
> > This adds a SPI driver for the SPI controller found in the IBM/AMCC
> > 4xx PowerPC's.
> >
> > Signed-off-by: Stefan Roese <sr-ynQEQJNshbs@public.gmane.org>
> > Signed-off-by: Wolfgang Ocker <weo-pMF0Ia4UJXeoYr4blSSd5g@public.gmane.org>
> > Acked-by: Josh Boyer <jwboyer-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
> > ---
>
> [...]
>
> > +static unsigned int of_num_gpios(struct device_node *node)
> > +{
> > + unsigned int num = 0;
> > +
> > + while (gpio_is_valid(of_get_gpio(node, num)))
> > + num++;
> > + return num;
> > +}
>
> FYI, as of commit 749820928a2fd47ff536773d869d2c3f8038b7d1 ("of/gpio:
> Implement of_gpio_count()") you can use of_gpio_count() from
> linux/of_gpio.h.
Thanks for the hint. I'll use it in the next version.
Best regards,
Stefan
------------------------------------------------------------------------------
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Roese <sr@denx.de>
To: avorontsov@ru.mvista.com
Cc: david-b@pacbell.net, linuxppc-dev@ozlabs.org,
spi-devel-general@lists.sourceforge.net
Subject: Re: [spi-devel-general] [PATCH v5] spi: Add PPC4xx SPI driver
Date: Tue, 6 Jan 2009 09:14:19 +0100 [thread overview]
Message-ID: <200901060914.19435.sr@denx.de> (raw)
In-Reply-To: <20090106020603.GA14074@oksana.dev.rtsoft.ru>
Hi Anton,
On Tuesday 06 January 2009, Anton Vorontsov wrote:
> > This adds a SPI driver for the SPI controller found in the IBM/AMCC
> > 4xx PowerPC's.
> >
> > Signed-off-by: Stefan Roese <sr@denx.de>
> > Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
> > Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
> > ---
>
> [...]
>
> > +static unsigned int of_num_gpios(struct device_node *node)
> > +{
> > + unsigned int num = 0;
> > +
> > + while (gpio_is_valid(of_get_gpio(node, num)))
> > + num++;
> > + return num;
> > +}
>
> FYI, as of commit 749820928a2fd47ff536773d869d2c3f8038b7d1 ("of/gpio:
> Implement of_gpio_count()") you can use of_gpio_count() from
> linux/of_gpio.h.
Thanks for the hint. I'll use it in the next version.
Best regards,
Stefan
next prev parent reply other threads:[~2009-01-06 8:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-25 15:48 [PATCH v5] spi: Add PPC4xx SPI driver Stefan Roese
2008-11-25 15:48 ` Stefan Roese
2008-12-09 21:48 ` Steven A. Falco
2008-12-09 22:14 ` Steven A. Falco
[not found] ` <1227628088-10849-1-git-send-email-sr-ynQEQJNshbs@public.gmane.org>
2008-12-27 19:30 ` David Brownell
2008-12-27 19:30 ` David Brownell
2009-01-05 18:12 ` Stefan Roese
2009-01-05 18:12 ` Stefan Roese
[not found] ` <200901051912.25874.sr-ynQEQJNshbs@public.gmane.org>
2009-01-05 19:31 ` Wolfgang Denk
2009-01-05 19:31 ` Wolfgang Denk
2009-01-06 8:26 ` Stefan Roese
[not found] ` <20090105193117.E5AD98387CDB-C2Gvrrd9BC/j/ljBK/0BTg@public.gmane.org>
2009-01-06 8:26 ` Stefan Roese
2009-01-06 8:26 ` Stefan Roese
[not found] ` <200812271130.12513.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2009-01-05 18:12 ` Stefan Roese
2008-12-27 19:32 ` David Brownell
2008-12-27 19:32 ` David Brownell
2008-12-27 21:36 ` Stephen Rothwell
2008-12-27 21:36 ` Stephen Rothwell
2009-01-06 2:06 ` Anton Vorontsov
2009-01-06 2:06 ` [spi-devel-general] " Anton Vorontsov
[not found] ` <20090106020603.GA14074-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2009-01-06 8:14 ` Stefan Roese [this message]
2009-01-06 8:14 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200901060914.19435.sr@denx.de \
--to=sr-ynqeqjnshbs@public.gmane.org \
--cc=avorontsov-hkdhdckH98+B+jHODAdFcQ@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.