* [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception @ 2009-01-29 12:45 Andrew Williams 2009-02-02 20:24 ` Antti Palosaari 0 siblings, 1 reply; 4+ messages in thread From: Andrew Williams @ 2009-01-29 12:45 UTC (permalink / raw) To: linux-dvb Good day everybody, In the past I have had problems with reception for the AF9015 if both tuners were enabled. It was disabled by default or I could manually enable dual tuners with dvb-usb-af9015 dual_mode=1 (modprobe.d/options) If both tuners were enabled there was a lot of signal degradation, however, with only 1 tuner enabled the quality was VERY good. I have just downloaded the latest drivers and it seems that both tuners are enabled by default and there is no parameter that I can find to disable the second tuner. Now I am back to where I was before with bad signal degradation but no way to disable the second tuner. With drivers dated 22 Dec 2008 the second tuner was still disabled by default. Also the driver from 22 December 2008 lit an LED on the Tuner to indicate that the firmware was loaded/stick was initialised. Something that I did not have before (the LED). Now with the latest driver, the LED does not function anymore but more importantly, both tuners are enabled by default. Is there any way that I can disable the second tuner without having to revert to the old drivers? Thank You _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception 2009-01-29 12:45 [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception Andrew Williams @ 2009-02-02 20:24 ` Antti Palosaari 2009-02-02 20:37 ` Lindsay Mathieson 2009-02-03 8:00 ` Andrew Williams 0 siblings, 2 replies; 4+ messages in thread From: Antti Palosaari @ 2009-02-02 20:24 UTC (permalink / raw) To: linux-media; +Cc: linux-dvb, Andrew Williams Hello Andrew, Andrew Williams wrote: > In the past I have had problems with reception for the AF9015 if both > tuners were enabled. > It was disabled by default or I could manually enable dual tuners with > dvb-usb-af9015 dual_mode=1 (modprobe.d/options) > > If both tuners were enabled there was a lot of signal degradation, > however, with only 1 tuner enabled the quality was VERY good. Yes, it really looks like there is some sensitivity drop when both tuners are enabled. However in my understanding tuner #1 in dual mode have almost same performance than tuner #0 in single mode. Also current MXL5005S tuner driver has not best performance... Could you test if that tuner driver performs any better for you: http://linuxtv.org/hg/~anttip/af9015-mxl500x/ > I have just downloaded the latest drivers and it seems that both tuners > are enabled by default and there is no parameter that I can find to > disable the second tuner. > Now I am back to where I was before with bad signal degradation but no > way to disable the second tuner. Yes, I removed whole parameter. If there will be much negative feedback then I should consider add that parameter back - but probably dual mode enabled by default. > With drivers dated 22 Dec 2008 the second tuner was still disabled by > default. Also the driver from 22 December 2008 lit an LED on the Tuner > to indicate that the firmware was loaded/stick was initialised. > Something that I did not have before (the LED). > > Now with the latest driver, the LED does not function anymore but more > importantly, both tuners are enabled by default. hmm, haven't changed LED controls. I should look that later. > Is there any way that I can disable the second tuner without having to > revert to the old drivers? Not currently. I will wait some feedback and make decision about that. Thank you for feedback. regards Antti -- http://palosaari.fi/ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception 2009-02-02 20:24 ` Antti Palosaari @ 2009-02-02 20:37 ` Lindsay Mathieson 2009-02-03 8:00 ` Andrew Williams 1 sibling, 0 replies; 4+ messages in thread From: Lindsay Mathieson @ 2009-02-02 20:37 UTC (permalink / raw) To: linux-dvb, linux-media, Antti Palosaari; +Cc: Andrew Williams [-- Attachment #1.1.1: Type: text/plain, Size: 822 bytes --] On Tue, 3 Feb 2009 06:24:42 am Antti Palosaari wrote: > Yes, it really looks like there is some sensitivity drop when both > tuners are enabled. However in my understanding tuner #1 in dual mode > have almost same performance than tuner #0 in single mode. Also current > MXL5005S tuner driver has not best performance... Yes, I'd noticed that. My TT works fine for most channels with both tuners except for one (SBS) which has less signal strength, both tuners fail on it - my single tuners don't. Another dual tuner (Lifeview TV Walker) has similar problems. All my tuners are feed off a powered splitter so I presume the problem with the dual tuners are they split the signal internally. I'll give the alternative driver you posted a go. -- Lindsay Mathieson http://blackpaw.jalbum.net/home [-- Attachment #1.1.2: Type: text/html, Size: 2024 bytes --] [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 197 bytes --] [-- Attachment #2: Type: text/plain, Size: 228 bytes --] _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception 2009-02-02 20:24 ` Antti Palosaari 2009-02-02 20:37 ` Lindsay Mathieson @ 2009-02-03 8:00 ` Andrew Williams 1 sibling, 0 replies; 4+ messages in thread From: Andrew Williams @ 2009-02-03 8:00 UTC (permalink / raw) To: linux-dvb, Antti Palosaari; +Cc: linux-media, lindsay.mathieson -----Original Message----- From: Antti Palosaari [mailto:crope@iki.fi] Sent: Tuesday, 3 February 2009 07:25 To: linux-media@vger.kernel.org Cc: linux-dvb@linuxtv.org; Andrew Williams Subject: Re: [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception Hello Andrew, Andrew Williams wrote: > In the past I have had problems with reception for the AF9015 if both > tuners were enabled. > It was disabled by default or I could manually enable dual tuners with > dvb-usb-af9015 dual_mode=1 (modprobe.d/options) > > If both tuners were enabled there was a lot of signal degradation, > however, with only 1 tuner enabled the quality was VERY good. Yes, it really looks like there is some sensitivity drop when both tuners are enabled. However in my understanding tuner #1 in dual mode have almost same performance than tuner #0 in single mode. Also current MXL5005S tuner driver has not best performance... Could you test if that tuner driver performs any better for you: http://linuxtv.org/hg/~anttip/af9015-mxl500x/ > I have just downloaded the latest drivers and it seems that both tuners > are enabled by default and there is no parameter that I can find to > disable the second tuner. > Now I am back to where I was before with bad signal degradation but no > way to disable the second tuner. Yes, I removed whole parameter. If there will be much negative feedback then I should consider add that parameter back - but probably dual mode enabled by default. > With drivers dated 22 Dec 2008 the second tuner was still disabled by > default. Also the driver from 22 December 2008 lit an LED on the Tuner > to indicate that the firmware was loaded/stick was initialised. > Something that I did not have before (the LED). > > Now with the latest driver, the LED does not function anymore but more > importantly, both tuners are enabled by default. hmm, haven't changed LED controls. I should look that later. > Is there any way that I can disable the second tuner without having to > revert to the old drivers? Not currently. I will wait some feedback and make decision about that. Thank you for feedback. regards Antti -- http://palosaari.fi/ Thanks Antti, Thanks for your reply and suggestions. I will reload the current latest driver and switch to Tuner 1 and test. I will also install the suggested driver http://linuxtv.org/hg/~anttip/af9015-mxl500x/ After testing I will get back to you. Current dual tuner Signal degradation is uniform over all channels - SBS/CH10/CH9/CH7/ABC here in Oz Unit is powered from a signal amplifier with a 20db variable attenuator (for testing so that I do not overdrive DVB). Reception Quality is compared with a DVICO Dual Digital 4 (rev 2) on the same splitter whenever I encounter a problem. I have noticed that the DVICO does not exhibit the same problems on the same machine as the AF9015. Don't get me wrong, I would love to have both tuners working well on the AF9015. As for the me not being able to disable the second tuner: Played with af9015.c and compared it to previous version that Had the function dvb_usb_af9015_dual_mode and parsed 6 lines back in into the 10day old driver. I added the following back into af9015.c in the right places, so no need to bother you with that if I still need it after the testing above: static int dvb_usb_af9015_dual_mode; module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); MODULE_PARM_DESC(dual_mode, "enable dual mode"); /* disable dual mode by default because it is buggy */ if (!dvb_usb_af9015_dual_mode) af9015_config.dual_mode = 0; Compiled. I can now disable the second tuner if I need in future. Unfortunately I am not a programmer so these things took me a while. No need for you to worry about that as I can solve dvb_usb_af9015_dual_mode myself in future, thanks very much for your clearly marked code. Any chance to stop a remote being detected for my af9015? It has no IR sensor or remote - KWorld PlusTV Dual DVB-T Stick The drivers detect a remote. I can't see one on the unit. Is it ok to leave it as is or is it better to disable (and how do I do that) remote detection on the DVB? Thanks for all your hard work. Regards Andrew ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-02-03 8:00 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-01-29 12:45 [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception Andrew Williams 2009-02-02 20:24 ` Antti Palosaari 2009-02-02 20:37 ` Lindsay Mathieson 2009-02-03 8:00 ` Andrew Williams
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.