From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus-sdhci@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Liu Dave <DaveLiu@freescale.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
sdhci-devel@list.drzeus.cx
Subject: [PATCH 0/13] FSL eSDHC support
Date: Fri, 20 Feb 2009 20:32:28 +0300 [thread overview]
Message-ID: <20090220173228.GA5091@oksana.dev.rtsoft.ru> (raw)
Hi all,
Some updates for the eSDHC support:
Changes since the third RFC:
- Use uninitialized_var() (suggested by Laurent Pinchart);
- Fixed a bug in eSDHC SDCLK prescaler calculations because of which
we were over-clocking the SDCLK, and that caused CRC errors using some
SD cards;
- Not a change, but some status: SDHS (50 MHz) cards were tested to
NOT work (at least on MPC837x boards) -- this is to be investigated
further. SDHC (> 4 GB) cards were not tested, yet.
Changes since the second RFC:
- Addressed all comments that were raised by Pierre Ossman.
There were too many to mention them all, so here is the link:
http://lkml.org/lkml/2009/2/6/320
Changes since the first RFC:
- Use of_iomap() in sdhci-of.c (suggested by Arnd Bergmann). Also added
Arnd's Acked-by: line for the sdhci-of patch.
- Kconfig help text improved (thanks to Matt Sealey and M. Warner Losh).
- In "sdhci: Add quirk to suppress PIO interrupts during DMA transfers"
patch: sdhci_init() now clears SDHCI_PIO_DISABLED flag, otherwise we
won't disable PIO interrupts after suspend.
- New patch: "sdhci: Add type checking for IO memory accessors"
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus-sdhci@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Kumar Gala <galak@kernel.crashing.org>,
Liu Dave <DaveLiu@freescale.com>,
sdhci-devel@list.drzeus.cx, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org
Subject: [PATCH 0/13] FSL eSDHC support
Date: Fri, 20 Feb 2009 20:32:28 +0300 [thread overview]
Message-ID: <20090220173228.GA5091@oksana.dev.rtsoft.ru> (raw)
Hi all,
Some updates for the eSDHC support:
Changes since the third RFC:
- Use uninitialized_var() (suggested by Laurent Pinchart);
- Fixed a bug in eSDHC SDCLK prescaler calculations because of which
we were over-clocking the SDCLK, and that caused CRC errors using some
SD cards;
- Not a change, but some status: SDHS (50 MHz) cards were tested to
NOT work (at least on MPC837x boards) -- this is to be investigated
further. SDHC (> 4 GB) cards were not tested, yet.
Changes since the second RFC:
- Addressed all comments that were raised by Pierre Ossman.
There were too many to mention them all, so here is the link:
http://lkml.org/lkml/2009/2/6/320
Changes since the first RFC:
- Use of_iomap() in sdhci-of.c (suggested by Arnd Bergmann). Also added
Arnd's Acked-by: line for the sdhci-of patch.
- Kconfig help text improved (thanks to Matt Sealey and M. Warner Losh).
- In "sdhci: Add quirk to suppress PIO interrupts during DMA transfers"
patch: sdhci_init() now clears SDHCI_PIO_DISABLED flag, otherwise we
won't disable PIO interrupts after suspend.
- New patch: "sdhci: Add type checking for IO memory accessors"
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
next reply other threads:[~2009-02-20 17:32 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-20 17:32 Anton Vorontsov [this message]
2009-02-20 17:32 ` [PATCH 0/13] FSL eSDHC support Anton Vorontsov
2009-02-20 17:33 ` [PATCH 01/13] sdhci: Add quirk for controllers with no end-of-busy IRQ Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-21 16:05 ` Pierre Ossman
2009-02-21 16:05 ` Pierre Ossman
2009-02-23 1:56 ` Ben Dooks
2009-02-23 1:56 ` Ben Dooks
2009-02-20 17:33 ` [PATCH 02/13] sdhci: Add support for bus-specific IO memory accessors Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 03/13] sdhci: Split card-detection IRQs management from sdhci_init() Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 04/13] sdhci: Enable only relevant (DMA/PIO) interrupts during transfers Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 05/13] sdhci: Add support for card-detection polling Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 06/13] sdhci: Add support for hosts reporting inverted write-protect state Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 07/13] sdhci: Add support for hosts with strict 32 bit addressing Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 08/13] sdhci: Add get_{max,timeout}_clock callbacks Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 09/13] sdhci: Add set_clock callback and a quirk for nonstandard clocks Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 10/13] sdhci: Add quirk for controllers that need small delays for PIO Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 11/13] sdhci: Add quirk for controllers that need IRQ re-init after reset Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 12/13] sdhci: Add quirk for controllers with max. block size up to 4096 bytes Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-20 17:33 ` [PATCH 13/13] mmc: Add OpenFirmware bindings for SDHCI driver Anton Vorontsov
2009-02-20 17:33 ` Anton Vorontsov
2009-02-21 16:01 ` [PATCH 0/13] FSL eSDHC support Pierre Ossman
2009-02-21 16:01 ` Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090220173228.GA5091@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=DaveLiu@freescale.com \
--cc=arnd@arndb.de \
--cc=ben-linux@fluff.org \
--cc=drzeus-sdhci@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.