From: Scott Wood <scottwood@freescale.com>
To: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: linuxppc-dev@ozlabs.org, Li Yang <leoli@freescale.com>,
David Gibson <david@gibson.dropbear.id.au>
Subject: Re: [PATCH v2 2/2] powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
Date: Wed, 18 Mar 2009 10:43:07 -0500 [thread overview]
Message-ID: <20090318154307.GB3182@loki.buserror.net> (raw)
In-Reply-To: <20090318152800.GA29557@oksana.dev.rtsoft.ru>
On Wed, Mar 18, 2009 at 06:28:00PM +0300, Anton Vorontsov wrote:
> It would be great to have #include <gianfar_enet.dts> facility in .dts
> files. ;-) I heard some rumors about this, what was the consequence?..
You can already do a raw include, but in most cases it needs parameterized
templates/macros to make it useful. There were some patches floating around
for that, but there was some disagreement about syntax and the discussion
seems to have died out.
> [...]
> >> + ranges;
> >
> > Can this be proper?
It's proper, but a bit lazy. :-)
> > ranges = <0x0 0x24520 0x20>;
>
> Yes, will change.
I'd prefer ranges = <0 0x24000 0x1000>, in case any other sub-blocks come
along in the future.
-Scott
next prev parent reply other threads:[~2009-03-18 15:43 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-17 18:59 [PATCH v2 2/2] powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes Anton Vorontsov
2009-03-18 13:21 ` Kumar Gala
2009-03-18 15:28 ` Anton Vorontsov
2009-03-18 15:43 ` Scott Wood [this message]
2009-03-18 15:50 ` Grant Likely
2009-03-19 1:20 ` David Gibson
2009-03-18 19:59 ` Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 1/4] powerpc/83xx: Add power management support for MPC837x boards Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 2/4] powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 3/4] powerpc/85xx: " Anton Vorontsov
2009-03-18 20:05 ` Scott Wood
2009-03-18 20:23 ` Anton Vorontsov
2009-03-18 20:27 ` Scott Wood
2009-03-18 20:29 ` Anton Vorontsov
2009-03-18 20:31 ` Scott Wood
2009-03-18 20:33 ` Anton Vorontsov
2009-03-18 20:35 ` Scott Wood
2009-03-18 20:39 ` Anton Vorontsov
2009-03-18 20:46 ` Scott Wood
2009-03-18 21:00 ` Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 4/4] powerpc/86xx: " Anton Vorontsov
2009-04-08 9:18 ` [PATCH 6/6] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Peter Korsgaard
2009-04-08 9:18 ` Peter Korsgaard
2009-04-17 5:13 ` Peter Korsgaard
2009-04-17 5:13 ` Peter Korsgaard
2009-04-17 12:23 ` Anton Vorontsov
2009-04-17 12:23 ` Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2008-12-05 20:09 [PATCH 0/7] OpenFirmware support for the spi_mpc83xx driver Anton Vorontsov
[not found] ` <20081205200936.GA19137-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-12-05 20:10 ` [PATCH 1/7] powerpc: Implement get_brgfreq() and get_baudrate() stubs Anton Vorontsov
2008-12-05 20:10 ` Anton Vorontsov
2008-12-16 18:24 ` Kumar Gala
2008-12-05 20:10 ` [PATCH 2/7] spi_mpc83xx: Fix sparse warnings Anton Vorontsov
2008-12-05 20:10 ` Anton Vorontsov
2008-12-05 20:10 ` [PATCH 3/7] spi_mpc83xx: Rework chip selects handling Anton Vorontsov
2008-12-05 20:10 ` Anton Vorontsov
2008-12-05 20:10 ` [PATCH 4/7] spi_mpc83xx: Add OF platform driver bindings Anton Vorontsov
2008-12-05 20:10 ` Anton Vorontsov
2008-12-05 20:10 ` [PATCH 5/7] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Anton Vorontsov
2008-12-05 20:10 ` Anton Vorontsov
2008-12-05 20:10 ` [PATCH 6/7] powerpc: Add mmc-spi-slot bindings Anton Vorontsov
2008-12-05 20:10 ` Anton Vorontsov
2008-12-05 20:10 ` [PATCH 7/7] powerpc/83xx: Add mmc-spi support via the device tree for MPC8323E-RDB Anton Vorontsov
2008-12-05 20:10 ` Anton Vorontsov
2008-12-18 18:33 ` [PATCH 0/7] OpenFirmware support for the spi_mpc83xx driver Anton Vorontsov
2008-12-18 18:33 ` Anton Vorontsov
2009-01-07 4:28 ` Kumar Gala
2009-01-07 4:28 ` Kumar Gala
[not found] ` <6DC0606C-1CDA-4549-8A63-E3F86010291B-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
2009-01-23 19:49 ` [PATCH resend 0/6] " Anton Vorontsov
2009-01-23 19:49 ` Anton Vorontsov
2009-01-23 19:49 ` Anton Vorontsov
[not found] ` <20090123194958.GA17355-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2009-01-23 19:50 ` [PATCH 1/6] spi_mpc83xx: Fix sparse warnings Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` [PATCH 2/6] spi_mpc83xx: Rework chip selects handling Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` [PATCH 3/6] spi_mpc83xx: Add OF platform driver bindings Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` [PATCH 4/6] powerpc: Add mmc-spi-slot bindings Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` [PATCH 5/6] powerpc/83xx: Add mmc-spi support via the device tree for MPC8323E-RDB Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` [PATCH 6/6] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov
2009-03-09 16:53 ` [PATCH resend 0/6] OpenFirmware support for the spi_mpc83xx driver Kumar Gala
2009-03-09 16:53 ` Kumar Gala
2009-03-09 16:53 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090318154307.GB3182@loki.buserror.net \
--to=scottwood@freescale.com \
--cc=avorontsov@ru.mvista.com \
--cc=david@gibson.dropbear.id.au \
--cc=leoli@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.