[PATCH resend 0/6] OpenFirmware support for the spi_mpc83xx driver

[Anton Vorontsov <avorontsov-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>]

On Tue, Jan 06, 2009 at 10:28:10PM -0600, Kumar Gala wrote:
> On Dec 5, 2008, at 2:09 PM, Anton Vorontsov wrote:
>> Hi all,
>>
>> The patch series are used to support SPI via the OF SPI subsystem
>> (driver/of/of_spi.c). Now the driver is able to manage its own
>> chip selects, and doesn't need any auxiliary support from the
>> board files or fsl_soc constructors.
>>
>> The series also contains PowerPC portions of the MMC SPI support.
>>
>> Since the series touches spi and powerpc trees, I think it would
>> be most convenient to pass it via one of these trees. The patches
>> doesn't touch any SPI functionality, only some probe routines, so
>> I believe powerpc.git is the best candidate...
>>
>> The other reason for powerpc tree is that the patches depends on
>> other patches as found in paulus/powerpc.git + of_gpio_count()
>> as found here:
>> http://ozlabs.org/pipermail/linuxppc-dev/2008-December/065917.html
>>
>> David, if you're OK with the patches, may I ask you to sign off on
>> the ones that touch drivers/spi so that we could pass it via Kumar's
>> powerpc.git?
>>
>> The queue:
>>
>> [1/7] powerpc: Implement get_brgfreq() and get_baudrate() stubs
>> [2/7] spi_mpc83xx: Fix sparse warnings
>> [3/7] spi_mpc83xx: Rework chip selects handling
>> [4/7] spi_mpc83xx: Add OF platform driver bindings
>> [5/7] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb  
>> boards
>> [6/7] powerpc: Add mmc-spi-slot bindings
>> [7/7] powerpc/83xx: Add mmc-spi support via the device tree for  
>> MPC8323E-RDB
>>
>
> David,
>
> Any status on these patches?

Ping? No single comment on this patch set for ~2 months...

Resending...

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
irc://irc.freenode.net/bd2

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword