From: Andrew Morton <akpm@linux-foundation.org>
To: avorontsov@ru.mvista.com
Cc: linuxppc-dev@ozlabs.org, dbrownell@users.sourceforge.net,
linux-kernel@vger.kernel.org,
spi-devel-general@lists.sourceforge.net
Subject: Re: [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD
Date: Mon, 4 May 2009 13:55:04 -0700 [thread overview]
Message-ID: <20090504135504.a6a6afcf.akpm@linux-foundation.org> (raw)
In-Reply-To: <20090430234739.GA27709@oksana.dev.rtsoft.ru>
On Fri, 1 May 2009 03:47:39 +0400
Anton Vorontsov <avorontsov@ru.mvista.com> wrote:
> Here are few patches that are needed to support spi-mmc slot on
> MPC8610HPCD PowerPC boards:
>
> [1/9] spi_mpc83xx: Handles other Freescale processors
> [2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message
> [3/9] spi_mpc83xx: Add small delay after asserting chip-select line
> [4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards
>
Some or all of these seem appropriate to 2.6.30 and perhaps even -stable?
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Morton <akpm@linux-foundation.org>
To: avorontsov@ru.mvista.com
Cc: galak@kernel.crashing.org, dbrownell@users.sourceforge.net,
linuxppc-dev@ozlabs.org, spi-devel-general@lists.sourceforge.net,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD
Date: Mon, 4 May 2009 13:55:04 -0700 [thread overview]
Message-ID: <20090504135504.a6a6afcf.akpm@linux-foundation.org> (raw)
In-Reply-To: <20090430234739.GA27709@oksana.dev.rtsoft.ru>
On Fri, 1 May 2009 03:47:39 +0400
Anton Vorontsov <avorontsov@ru.mvista.com> wrote:
> Here are few patches that are needed to support spi-mmc slot on
> MPC8610HPCD PowerPC boards:
>
> [1/9] spi_mpc83xx: Handles other Freescale processors
> [2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message
> [3/9] spi_mpc83xx: Add small delay after asserting chip-select line
> [4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards
>
Some or all of these seem appropriate to 2.6.30 and perhaps even -stable?
next prev parent reply other threads:[~2009-05-04 20:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-30 23:47 [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD Anton Vorontsov
2009-04-30 23:47 ` Anton Vorontsov
2009-04-30 23:47 ` Anton Vorontsov
[not found] ` <20090430234739.GA27709-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2009-04-30 23:48 ` [PATCH 1/9] spi_mpc83xx: Handles other Freescale processors Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 3/9] spi_mpc83xx: Add small delay after asserting chip-select line Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 5/9] spi_mpc83xx: Fix checkpatch issues Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 6/9] spi_mpc83xx: Split mpc83xx_spi_work() into two routines Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 7/9] spi_mpc83xx: Remove dead code Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 8/9] spi_mpc83xx: Rename spi_83xx.c to spi_8xxx.c Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` [PATCH 9/9] spi_mpc8xxx: s/83xx/8xxx/g Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov
2009-05-01 21:42 ` [spi-devel-general] " Grant Likely
2009-05-01 21:42 ` Grant Likely
[not found] ` <20090430234833.GI7901-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2009-05-04 20:53 ` Andrew Morton
2009-05-04 20:53 ` Andrew Morton
2009-05-04 20:53 ` Andrew Morton
2009-05-04 23:36 ` Anton Vorontsov
2009-05-04 23:36 ` Anton Vorontsov
2009-05-04 20:55 ` Andrew Morton [this message]
2009-05-04 20:55 ` [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD Andrew Morton
[not found] ` <20090504135504.a6a6afcf.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2009-05-04 23:36 ` Anton Vorontsov
2009-05-04 23:36 ` Anton Vorontsov
2009-05-04 23:36 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090504135504.a6a6afcf.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=avorontsov@ru.mvista.com \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.