All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jean Delvare <khali@linux-fr.org>
To: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Greg KH <greg@kroah.com>, x86 maintainers <x86@kernel.org>,
	LKML <linux-kernel@vger.kernel.org>, stable <stable@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	LM Sensors <lm-sensors@lm-sensors.org>,
	Ingo Molnar <mingo@elte.hu>
Subject: Re: [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for
Date: Fri, 29 May 2009 06:05:47 +0000	[thread overview]
Message-ID: <20090529080547.38ecfed8@hyperion.delvare> (raw)
In-Reply-To: <1243575735.3159.7.camel@localhost.localdomain>

On Fri, 29 May 2009 11:12:15 +0530, Jaswinder Singh Rajput wrote:
> Hi Greg,
> 
> On Thu, 2009-05-28 at 07:49 -0700, Greg KH wrote:
> > On Thu, May 28, 2009 at 07:43:34PM +0530, Jaswinder Singh Rajput wrote:
> > > I proposed for stable because I was using AMD 11H from last 6 months and
> > > I was missing temperature monitor badly because my earlier Laptop was
> > > broken by overheating. So I thought if it goes to stable then users will
> > > start getting benefit of it, but if you want that users should wait for
> > > another 2 years. Then it is OK ;-)
> > 
> > 2 years?  The next kernel release will be out in 3 months, we have a
> > very predictable release schedule.
> 
> I am sorry for being unclear. I meant for linux distros. Even one of the
> most active Fedora 10 is using vmlinuz-2.6.27.24-170.2.68.fc10.x86_64 is
> almost 7 months behind the linus git. And another linux distro are still
> using 2.6.22 or so which are almost 2 years behind linus git.

Distributions are free to backport any patch they like to their kernel
tree, at any time.

-- 
Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

WARNING: multiple messages have this Message-ID (diff)
From: Jean Delvare <khali@linux-fr.org>
To: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Greg KH <greg@kroah.com>, x86 maintainers <x86@kernel.org>,
	LKML <linux-kernel@vger.kernel.org>, stable <stable@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	LM Sensors <lm-sensors@lm-sensors.org>,
	Ingo Molnar <mingo@elte.hu>
Subject: Re: [PATCH-tip] x86: hwmon/k8temp.c Add  support for AMD 10H and 11H
Date: Fri, 29 May 2009 08:05:47 +0200	[thread overview]
Message-ID: <20090529080547.38ecfed8@hyperion.delvare> (raw)
In-Reply-To: <1243575735.3159.7.camel@localhost.localdomain>

On Fri, 29 May 2009 11:12:15 +0530, Jaswinder Singh Rajput wrote:
> Hi Greg,
> 
> On Thu, 2009-05-28 at 07:49 -0700, Greg KH wrote:
> > On Thu, May 28, 2009 at 07:43:34PM +0530, Jaswinder Singh Rajput wrote:
> > > I proposed for stable because I was using AMD 11H from last 6 months and
> > > I was missing temperature monitor badly because my earlier Laptop was
> > > broken by overheating. So I thought if it goes to stable then users will
> > > start getting benefit of it, but if you want that users should wait for
> > > another 2 years. Then it is OK ;-)
> > 
> > 2 years?  The next kernel release will be out in 3 months, we have a
> > very predictable release schedule.
> 
> I am sorry for being unclear. I meant for linux distros. Even one of the
> most active Fedora 10 is using vmlinuz-2.6.27.24-170.2.68.fc10.x86_64 is
> almost 7 months behind the linus git. And another linux distro are still
> using 2.6.22 or so which are almost 2 years behind linus git.

Distributions are free to backport any patch they like to their kernel
tree, at any time.

-- 
Jean Delvare

  reply	other threads:[~2009-05-29  6:05 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-22  8:04 [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Jaswinder Singh Rajput
2009-05-22  8:16 ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Rudolf Marek
2009-05-22  8:16   ` [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Rudolf Marek
2009-05-22  8:42   ` Jaswinder Singh Rajput
2009-05-22  8:54     ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-05-22  9:30     ` [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Jaswinder Singh Rajput
2009-05-22  9:42       ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-05-23 16:59       ` Rudolf Marek
2009-05-23 16:59         ` [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Rudolf Marek
2009-05-24 12:19         ` Jaswinder Singh Rajput
2009-05-24 12:31           ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-05-26 12:10         ` [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Jaswinder Singh Rajput
2009-05-26 12:22           ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-05-26 15:20           ` Rudolf Marek
2009-05-26 15:20             ` [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Rudolf Marek
2009-05-26 15:44             ` Jaswinder Singh Rajput
2009-05-26 15:56               ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-05-28 11:57               ` [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Jaswinder Singh Rajput
2009-05-28 12:09                 ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-05-28 12:28                 ` Jean Delvare
2009-05-28 12:28                   ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Jean Delvare
2009-05-28 14:13                   ` Jaswinder Singh Rajput
2009-05-28 14:25                     ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-05-28 14:49                     ` [lm-sensors] [stable] [PATCH-tip] x86: hwmon/k8temp.c Greg KH
2009-05-28 14:49                       ` [stable] [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Greg KH
2009-05-29  5:42                       ` Jaswinder Singh Rajput
2009-05-29  5:54                         ` [lm-sensors] [stable] [PATCH-tip] x86: hwmon/k8temp.c Add Jaswinder Singh Rajput
2009-05-29  6:05                         ` Jean Delvare [this message]
2009-05-29  6:05                           ` [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Jean Delvare
2009-06-06 10:36               ` Jaswinder Singh Rajput
2009-06-06 10:48                 ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput
2009-06-20  7:56               ` [HWMON] x86: hwmon/k8temp.c Add support for AMD 11H Jaswinder Singh Rajput
2009-06-20  8:08                 ` [lm-sensors] " Jaswinder Singh Rajput
2009-06-25 14:09                 ` Jaswinder Singh Rajput
2009-06-25 14:21                   ` [lm-sensors] " Jaswinder Singh Rajput
2009-07-19  5:03                   ` Jaswinder Singh Rajput
2009-07-19  5:15                     ` [lm-sensors] " Jaswinder Singh Rajput
2009-05-25 13:45       ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jean Delvare
2009-05-25 13:45         ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for AMD 10H and 11H Jean Delvare
2009-05-25 14:17         ` Jaswinder Singh Rajput
2009-05-25 14:29           ` [lm-sensors] [PATCH-tip] x86: hwmon/k8temp.c Add support for Jaswinder Singh Rajput

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090529080547.38ecfed8@hyperion.delvare \
    --to=khali@linux-fr.org \
    --cc=akpm@linux-foundation.org \
    --cc=greg@kroah.com \
    --cc=jaswinder@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=mingo@elte.hu \
    --cc=stable@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.