From: JiSheng Zhang <jszhang3@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: Artem.Bityutskiy@nokia.com, dwmw2@infradead.org,
linux-kernel@vger.kernel.org, rmk@arm.linux.org.uk,
adrian.hunter@nokia.com
Subject: [PATCH] UBI: Fix allocation of volume table
Date: Tue, 11 Aug 2009 09:44:55 +0800 [thread overview]
Message-ID: <20090811094455.6f9cbbfe@ustc> (raw)
We can't use vmalloc for the buffer used for volume table for some NAND
or NOR drivers may pass the buffer to DMA. And the volume table size
a.k.a vtbl_size is small so we can use kmalloc or kzalloc for it instead
Signed-off-by: JiSheng Zhang <jszhang3@gmail.com>
---
drivers/mtd/ubi/build.c | 6 +++---
drivers/mtd/ubi/vtbl.c | 18 ++++++++----------
2 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index e1f7d0a..1c1f877 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -605,7 +605,7 @@ out_wl:
ubi_wl_close(ubi);
out_vtbl:
free_internal_volumes(ubi);
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
out_si:
ubi_scan_destroy_si(si);
return err;
@@ -1031,7 +1031,7 @@ out_detach:
if (do_free)
free_user_volumes(ubi);
free_internal_volumes(ubi);
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
out_free:
vfree(ubi->peb_buf1);
vfree(ubi->peb_buf2);
@@ -1102,7 +1102,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
uif_close(ubi);
ubi_wl_close(ubi);
free_internal_volumes(ubi);
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
put_mtd_device(ubi->mtd);
vfree(ubi->peb_buf1);
vfree(ubi->peb_buf2);
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 1afc61e..59e452a 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -424,12 +424,11 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
/* Read both LEB 0 and LEB 1 into memory */
ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
- leb[seb->lnum] = vmalloc(ubi->vtbl_size);
+ leb[seb->lnum] = kzalloc(ubi->vtbl_size, GFP_KERNEL);
if (!leb[seb->lnum]) {
err = -ENOMEM;
goto out_free;
}
- memset(leb[seb->lnum], 0, ubi->vtbl_size);
err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
ubi->vtbl_size);
@@ -470,7 +469,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
}
/* Both LEB 1 and LEB 2 are OK and consistent */
- vfree(leb[1]);
+ kfree(leb[1]);
return leb[0];
} else {
/* LEB 0 is corrupted or does not exist */
@@ -491,13 +490,13 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
goto out_free;
ubi_msg("volume table was restored");
- vfree(leb[0]);
+ kfree(leb[0]);
return leb[1];
}
out_free:
- vfree(leb[0]);
- vfree(leb[1]);
+ kfree(leb[0]);
+ kfree(leb[1]);
return ERR_PTR(err);
}
@@ -515,10 +514,9 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
int i;
struct ubi_vtbl_record *vtbl;
- vtbl = vmalloc(ubi->vtbl_size);
+ vtbl = kzalloc(ubi->vtbl_size, GFP_KERNEL);
if (!vtbl)
return ERR_PTR(-ENOMEM);
- memset(vtbl, 0, ubi->vtbl_size);
for (i = 0; i < ubi->vtbl_slots; i++)
memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);
@@ -528,7 +526,7 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
err = create_vtbl(ubi, si, i, vtbl);
if (err) {
- vfree(vtbl);
+ kfree(vtbl);
return ERR_PTR(err);
}
}
@@ -856,7 +854,7 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
return 0;
out_free:
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
kfree(ubi->volumes[i]);
ubi->volumes[i] = NULL;
--
1.6.3.3
WARNING: multiple messages have this Message-ID (diff)
From: JiSheng Zhang <jszhang3@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Artem.Bityutskiy@nokia.com,
adrian.hunter@nokia.com, rmk@arm.linux.org.uk,
dwmw2@infradead.org
Subject: [PATCH] UBI: Fix allocation of volume table
Date: Tue, 11 Aug 2009 09:44:55 +0800 [thread overview]
Message-ID: <20090811094455.6f9cbbfe@ustc> (raw)
We can't use vmalloc for the buffer used for volume table for some NAND
or NOR drivers may pass the buffer to DMA. And the volume table size
a.k.a vtbl_size is small so we can use kmalloc or kzalloc for it instead
Signed-off-by: JiSheng Zhang <jszhang3@gmail.com>
---
drivers/mtd/ubi/build.c | 6 +++---
drivers/mtd/ubi/vtbl.c | 18 ++++++++----------
2 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index e1f7d0a..1c1f877 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -605,7 +605,7 @@ out_wl:
ubi_wl_close(ubi);
out_vtbl:
free_internal_volumes(ubi);
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
out_si:
ubi_scan_destroy_si(si);
return err;
@@ -1031,7 +1031,7 @@ out_detach:
if (do_free)
free_user_volumes(ubi);
free_internal_volumes(ubi);
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
out_free:
vfree(ubi->peb_buf1);
vfree(ubi->peb_buf2);
@@ -1102,7 +1102,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
uif_close(ubi);
ubi_wl_close(ubi);
free_internal_volumes(ubi);
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
put_mtd_device(ubi->mtd);
vfree(ubi->peb_buf1);
vfree(ubi->peb_buf2);
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 1afc61e..59e452a 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -424,12 +424,11 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
/* Read both LEB 0 and LEB 1 into memory */
ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
- leb[seb->lnum] = vmalloc(ubi->vtbl_size);
+ leb[seb->lnum] = kzalloc(ubi->vtbl_size, GFP_KERNEL);
if (!leb[seb->lnum]) {
err = -ENOMEM;
goto out_free;
}
- memset(leb[seb->lnum], 0, ubi->vtbl_size);
err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
ubi->vtbl_size);
@@ -470,7 +469,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
}
/* Both LEB 1 and LEB 2 are OK and consistent */
- vfree(leb[1]);
+ kfree(leb[1]);
return leb[0];
} else {
/* LEB 0 is corrupted or does not exist */
@@ -491,13 +490,13 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
goto out_free;
ubi_msg("volume table was restored");
- vfree(leb[0]);
+ kfree(leb[0]);
return leb[1];
}
out_free:
- vfree(leb[0]);
- vfree(leb[1]);
+ kfree(leb[0]);
+ kfree(leb[1]);
return ERR_PTR(err);
}
@@ -515,10 +514,9 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
int i;
struct ubi_vtbl_record *vtbl;
- vtbl = vmalloc(ubi->vtbl_size);
+ vtbl = kzalloc(ubi->vtbl_size, GFP_KERNEL);
if (!vtbl)
return ERR_PTR(-ENOMEM);
- memset(vtbl, 0, ubi->vtbl_size);
for (i = 0; i < ubi->vtbl_slots; i++)
memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);
@@ -528,7 +526,7 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
err = create_vtbl(ubi, si, i, vtbl);
if (err) {
- vfree(vtbl);
+ kfree(vtbl);
return ERR_PTR(err);
}
}
@@ -856,7 +854,7 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
return 0;
out_free:
- vfree(ubi->vtbl);
+ kfree(ubi->vtbl);
for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
kfree(ubi->volumes[i]);
ubi->volumes[i] = NULL;
--
1.6.3.3
next reply other threads:[~2009-08-11 1:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-11 1:44 JiSheng Zhang [this message]
2009-08-11 1:44 ` [PATCH] UBI: Fix allocation of volume table JiSheng Zhang
2009-08-14 16:05 ` Artem Bityutskiy
2009-08-14 16:05 ` Artem Bityutskiy
-- strict thread matches above, loose matches on Subject: below --
2009-08-11 1:25 JiSheng Zhang
2009-08-11 1:25 ` JiSheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090811094455.6f9cbbfe@ustc \
--to=jszhang3@gmail.com \
--cc=Artem.Bityutskiy@nokia.com \
--cc=adrian.hunter@nokia.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=rmk@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.