From: Rodolfo Giometti <giometti@enneenne.com>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH] hwmon w83627hf: add mfd support.
Date: Fri, 11 Sep 2009 07:42:23 +0000 [thread overview]
Message-ID: <20090911074223.GG26519@gundam.enneenne.com> (raw)
In-Reply-To: <1252585810-5336-2-git-send-email-giometti@linux.it>
[-- Attachment #1.1: Type: text/plain, Size: 2086 bytes --]
On Thu, Sep 10, 2009 at 02:56:09PM +0200, Jean Delvare wrote:
> Hi Rodolfo,
>
> Don't bother including Frodo L. and Mark S. in the discussions, they
> have left the lm-sensors project years ago.
Ok. I just sent the letter to them in order to inform about my
proposal...
> On Thu, 10 Sep 2009 14:30:10 +0200, Rodolfo Giometti wrote:
> > The file has been splitted up into two parts:
> >
> > * drivers/mfd/w83627hf.c - detects the chip and define proper
> > platform devices into mfd support
> >
> > * drivers/hwmon/hwmon-w83627hf.c - implements the driver for hwmon
> > functionality only
> >
> > The patch also fixes up some non reentrant code and some C-style issues.
> >
> > Signed-off-by: Rodolfo Giometti <giometti@linux.it>
> > ---
> > drivers/hwmon/Kconfig | 2 +-
> > drivers/hwmon/Makefile | 2 +-
> > drivers/hwmon/{w83627hf.c => hwmon-w83627hf.c} | 373 +++++-------------------
>
> This name change will break all users of the driver. The sensors-detect
> script points the user to "w83627hf" and typically writes this value to
> an init script or configuration file. The w83627hf driver doesn't
> auto-load (yet) so this is a requirement.
>
> Assuming that the hwmon part depends on the MFD part, I'd rather keep
> "w83627hf" as the hwmon part name, and name the new MFD part
> "w83627hf-core" or similar. I agree it's not so nice but at least it
> doesn't break compatibility.
I agree. So I'm going to keep w83627hf name for hwmon part name and
using w83627hf-core for the new MFD part. Then I'll repost my patch.
Thanks for your attention,
Rodolfo
--
GNU/Linux Solutions e-mail: giometti@enneenne.com
Linux Device Driver giometti@linux.it
Embedded Systems phone: +39 349 2432127
UNIX programming skype: rodolfo.giometti
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2009-09-11 7:42 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-10 12:30 [lm-sensors] [PATCH] hwmon w83627hf: add mfd support Rodolfo Giometti
2009-09-10 12:56 ` Jean Delvare
2009-09-11 7:42 ` Rodolfo Giometti [this message]
2009-09-11 10:58 ` Samuel Ortiz
2009-09-11 15:07 ` Rodolfo Giometti
2009-09-15 11:38 ` Samuel Ortiz
2009-09-17 13:34 ` Jean Delvare
2009-09-17 13:51 ` Rodolfo Giometti
2009-09-17 13:57 ` Jean Delvare
2009-09-17 14:03 ` Rodolfo Giometti
2009-09-17 14:07 ` Jean Delvare
2009-09-17 14:34 ` Samuel Ortiz
2009-09-18 7:42 ` Jean Delvare
2009-09-18 8:01 ` Samuel Ortiz
2009-09-18 11:02 ` Rodolfo Giometti
2009-09-18 12:09 ` Rodolfo Giometti
2009-09-18 14:42 ` Samuel Ortiz
2009-09-18 14:49 ` Jean Delvare
2009-09-18 16:16 ` Jean Delvare
2009-09-20 23:48 ` Samuel Ortiz
2009-09-22 8:22 ` Rodolfo Giometti
2009-09-22 8:26 ` Rodolfo Giometti
2009-09-22 8:33 ` Rodolfo Giometti
2009-10-01 13:23 ` Jean Delvare
2009-10-01 13:53 ` Samuel Ortiz
2009-11-02 13:23 ` Jean Delvare
2009-11-03 8:17 ` Rodolfo Giometti
-- strict thread matches above, loose matches on Subject: below --
2010-02-10 12:18 Rodolfo Giometti
2010-02-27 10:58 ` Jean Delvare
2011-09-22 9:11 ` Rodolfo Giometti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090911074223.GG26519@gundam.enneenne.com \
--to=giometti@enneenne.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.