From: Jean Delvare <khali@linux-fr.org>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH] hwmon w83627hf: add mfd support.
Date: Fri, 18 Sep 2009 14:49:02 +0000 [thread overview]
Message-ID: <20090918164902.55a387eb@hyperion.delvare> (raw)
In-Reply-To: <1252585810-5336-2-git-send-email-giometti@linux.it>
On Fri, 18 Sep 2009 14:09:23 +0200, Rodolfo Giometti wrote:
> Hi Jean,
>
> this new proposal patch sounds better to you? :)
>
> Ciao,
>
> Rodolfo
>
> --
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 2d50166..bc7058f 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -894,6 +894,7 @@ config SENSORS_W83L786NG
>
> config SENSORS_W83627HF
> tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
> + depends on 83627HF
Which doesn't exist, so the driver can't be selected. Obviously you
meant: depends on MFD_W83627HF.
But please also see my discussion with Samuel on depends vs. select.
I'd prefer that you use select. Especially given that the MFD
configuration entry is _after_ the hwmon configuration entry in
Kconfig, I fear that even if users see and select MFD_W83627HF, they
won't walk back to the W83627HF entry to select it.
Samuel, wouldn't it make sense to move the MFD section up in the Device
Drivers section?
Even after fixing this so that I could select the driver, I'm hitting
build problems:
CC [M] drivers/hwmon/w83627hf.o
drivers/hwmon/w83627hf.c: In function ‘w83627hf_probe’:
drivers/hwmon/w83627hf.c:1121: warning: passing argument 1 of ‘acpi_check_resource_conflict’ from incompatible pointer type
drivers/hwmon/w83627hf.c:1125: error: ‘WINB_REGION_SIZE’ undeclared (first use in this function)
drivers/hwmon/w83627hf.c:1125: error: (Each undeclared identifier is reported only once
drivers/hwmon/w83627hf.c:1125: error: for each function it appears in.)
drivers/hwmon/w83627hf.c: In function ‘w83627hf_remove’:
drivers/hwmon/w83627hf.c:1290: error: ‘WINB_REGION_SIZE’ undeclared (first use in this function)
Please build-test your patches before you send them.
> select HWMON_VID
> help
> If you say yes here you get support for the Winbond W836X7 series
> diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
> index 389150b..4757668 100644
> --- a/drivers/hwmon/w83627hf.c
> +++ b/drivers/hwmon/w83627hf.c
> @@ -51,18 +51,10 @@
> #include <linux/mutex.h>
> #include <linux/ioport.h>
> #include <linux/acpi.h>
> -#include <asm/io.h>
> +#include <linux/io.h>
As I said before, this change is already upstream, so please don't
include it in your patch.
> #include "lm75.h"
> +#include <linux/mfd/w83627hf.h>
Global includes must be listed before local ones.
I'll go on with the review when you provide a patch I can build.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2009-09-18 14:49 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-10 12:30 [lm-sensors] [PATCH] hwmon w83627hf: add mfd support Rodolfo Giometti
2009-09-10 12:56 ` Jean Delvare
2009-09-11 7:42 ` Rodolfo Giometti
2009-09-11 10:58 ` Samuel Ortiz
2009-09-11 15:07 ` Rodolfo Giometti
2009-09-15 11:38 ` Samuel Ortiz
2009-09-17 13:34 ` Jean Delvare
2009-09-17 13:51 ` Rodolfo Giometti
2009-09-17 13:57 ` Jean Delvare
2009-09-17 14:03 ` Rodolfo Giometti
2009-09-17 14:07 ` Jean Delvare
2009-09-17 14:34 ` Samuel Ortiz
2009-09-18 7:42 ` Jean Delvare
2009-09-18 8:01 ` Samuel Ortiz
2009-09-18 11:02 ` Rodolfo Giometti
2009-09-18 12:09 ` Rodolfo Giometti
2009-09-18 14:42 ` Samuel Ortiz
2009-09-18 14:49 ` Jean Delvare [this message]
2009-09-18 16:16 ` Jean Delvare
2009-09-20 23:48 ` Samuel Ortiz
2009-09-22 8:22 ` Rodolfo Giometti
2009-09-22 8:26 ` Rodolfo Giometti
2009-09-22 8:33 ` Rodolfo Giometti
2009-10-01 13:23 ` Jean Delvare
2009-10-01 13:53 ` Samuel Ortiz
2009-11-02 13:23 ` Jean Delvare
2009-11-03 8:17 ` Rodolfo Giometti
-- strict thread matches above, loose matches on Subject: below --
2010-02-10 12:18 Rodolfo Giometti
2010-02-27 10:58 ` Jean Delvare
2011-09-22 9:11 ` Rodolfo Giometti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090918164902.55a387eb@hyperion.delvare \
--to=khali@linux-fr.org \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.