* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
@ 2009-09-24 5:33 Boris Derzhavets
2009-09-24 5:54 ` Boris Derzhavets
0 siblings, 1 reply; 13+ messages in thread
From: Boris Derzhavets @ 2009-09-24 5:33 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 8884 bytes --]
> Does it work with 2.6.31 running without Xen?
Works fine. Logs are attached.
>How do the log files compare?
Look the same.
I was wrong regarding time of X-server startup,
in both case after login in text console.
# startx
Boris
--- On Wed, 9/23/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Jeremy Fitzhardinge" <jeremy@goop.org>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 4:25 PM
>I assume you're saying that it fails with 2.6.31-pvops dom0?
Yes.
>How does it fail? Is it completely non-functional?
Yes, it is completely non-functional.
>Does the whole system crash?
No, just in text mode.
> Or does X simply fail to start?
No. It seems to be running.
>Or it does start but is crippled in some way?
It starts due to logs content during system boot up ,
like on F11, where everything is going fine.
I attached both dmesg.log and Xorg.0.log to previous message for Ubuntu 9.04 Server.
> Does it work with 2.6.31 running without Xen? How do the log files compare?
I will check it tomorrow.
Boris.
--- On Wed, 9/23/09, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
From: Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 3:27 PM
On 09/23/09 08:45, Boris Derzhavets wrote:
> Video card Radeon HD 4560.
X-server starts fine under native
> 2.6.28-11-server
> ubuntu kernel.
>
I assume you're saying that it fails with 2.6.31-pvops dom0? How does
it fail? Is it completely non-functional? Does the whole system
crash? Or does X simply fail to start? Or it does start but is
crippled in some way?
Does it work with 2.6.31 running without Xen? How do the log files compare?
Thanks,
J
>
> X-Windows Setup :-
>
> Downsize the system:
> vi /etc/default/linux-restricted-modules-common:
> DISABLED_MODULES=”ath_hal fc fglrx ltm nv” Install the X11 bare bone:
>
> # aptitude install x-window-system-core
> # aptitude install fluxbox fluxconf #lightwight windows manager
> # aptitude install dillo #lightweight browser
> # aptitude install xfe #lightweight file manager
> # apttitude install
synaptic # To install eset & esetroot
> Change /etc/X11/xorg.conf:
> # dpkg-reconfigure xserver-xorg #guided setup
> Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline
> values)
> X-server starts fine under native Ubuntu Server kernel and fluxbox
> is completely functional.
>
> Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
>
> dmesg output :-
> . . . . . .
>
> [ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic
> 0 pin 16 triggering 1 polarity 1
> [ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 43.710523] [drm] Initialized drm 1.1.0 20060810
> [ 43.758245] pci 0000:01:00.0: setting latency timer to 64
> [ 43.758433] [drm] Initialized radeon 1.31.0
20080528 for
> 0000:01:00.0 on minor 0
> [ 43.763134] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035133] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035198] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.061841] [drm] Setting GART location based on new memory map
> [ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
> [ 44.095805] [drm] Loading RV730/RV740 CP Microcode
> [ 44.110868] [drm] Resetting GPU
> [ 44.215007] [drm] writeback test failed
> [ 79.050085] [drm] Resetting
GPU
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
>
Xorg.0.log :-
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX:
> reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) RADEON(0): Setting screen physical size to 338 x 270
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org
Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "us"
> (**) AT Translated Set 2 keyboard: xkb_layout: "us"
> (II) config/hal: Adding input device Macintosh mouse button
emulation
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Configuring as mouse
> (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
> (**) Macintosh mouse button emulation: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE)
> (**) Macintosh mouse button emulation: (accel) keeping acceleration
> scheme 1
> (**) Macintosh mouse button emulation: (accel) filter chain
> progression: 2.00
> (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
> (**)
Macintosh mouse button emulation: (accel) set acceleration profile 0
> (II) config/hal: Adding input device HID 062a:0001
> (**) HID 062a:0001: always reports core events
> (**) HID 062a:0001: Device: "/dev/input/event4"
> (II) HID 062a:0001: Found 5 mouse buttons
> (II) HID 062a:0001: Found x and y relative axes
> (II) HID 062a:0001: Configuring as mouse
> (**) HID 062a:0001: YAxisMapping: buttons 4 and 5
> (**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
> (**) HID 062a:0001: (accel) keeping acceleration scheme 1
> (**) HID 062a:0001: (accel) filter chain progression: 2.00
> (**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
> (**) HID 062a:0001: (accel) set acceleration profile 0
>
>
Boris.
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 11205 bytes --]
[-- Attachment #2: Xorg.0.log.gz --]
[-- Type: application/gzip, Size: 8674 bytes --]
[-- Attachment #3: dmesg.2.6.31.gz --]
[-- Type: application/gzip, Size: 12357 bytes --]
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-24 5:33 Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server Boris Derzhavets
@ 2009-09-24 5:54 ` Boris Derzhavets
2009-09-24 16:48 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 13+ messages in thread
From: Boris Derzhavets @ 2009-09-24 5:54 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 11311 bytes --]
Sorry , there is difference in dmesg reports under xen and as vanilla.
dmesg under xen:-
[ 243.858191] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 243.858263] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132051] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132115] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132181] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.157265] [drm] Setting GART location based on new memory map
[ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
[ 244.190911] [drm] Loading RV730/RV740 CP Microcode
[ 244.205974] [drm] Resetting GPU
-> [ 244.310103] [drm] writeback test failed
[ 251.220092] [drm] Resetting GPU
dmesg 2.6.31 vanilla:-
[ 36.941430] [drm] Initialized drm 1.1.0 20060810
[ 36.988225] pci 0000:01:00.0: setting latency timer to 64
[ 36.988341] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 36.989222] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.210900] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.210940] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.210976] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.232744] [drm] Setting GART location based on new memory map
[ 37.248205] [drm] Loading RV730/RV740 PFP Microcode
[ 37.248227] [drm] Loading RV730/RV740 CP Microcode
[ 37.263281] [drm] Resetting GPU
-> [ 37.263336] [drm] writeback test succeeded in 1 usecs
Boris
--- On Thu, 9/24/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Jeremy Fitzhardinge" <jeremy@goop.org>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Thursday, September 24, 2009, 1:33 AM
> Does it work with 2.6.31 running without Xen?
Works fine. Logs are attached.
>How do the log files compare?
Look the same.
I was wrong regarding time of X-server startup,
in both case after login in text console.
# startx
Boris
--- On Wed, 9/23/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Jeremy Fitzhardinge" <jeremy@goop.org>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 4:25
PM
>I assume you're saying that it fails with 2.6.31-pvops dom0?
Yes.
>How does it fail? Is it completely non-functional?
Yes, it is completely non-functional.
>Does the whole system crash?
No, just in text mode.
> Or does X simply fail to start?
No. It seems to be running.
>Or it does start but is crippled in some way?
It starts due to logs content during system boot up ,
like on F11, where everything is going fine.
I attached both dmesg.log and Xorg.0.log to previous message for Ubuntu 9.04 Server.
> Does it work with 2.6.31 running without Xen? How do the log files compare?
I will check it tomorrow.
Boris.
--- On Wed, 9/23/09, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
From: Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 3:27 PM
On 09/23/09 08:45, Boris Derzhavets wrote:
> Video card Radeon HD 4560.
X-server starts fine under native
> 2.6.28-11-server
> ubuntu kernel.
>
I assume you're saying that it fails with 2.6.31-pvops dom0? How does
it fail? Is it completely non-functional? Does the whole system
crash? Or does X simply fail to start? Or it does start but is
crippled in some way?
Does it work with 2.6.31 running without Xen? How do the log files compare?
Thanks,
J
>
> X-Windows Setup :-
>
> Downsize the system:
> vi /etc/default/linux-restricted-modules-common:
> DISABLED_MODULES=”ath_hal fc fglrx ltm nv” Install the X11 bare bone:
>
> # aptitude install x-window-system-core
> # aptitude install fluxbox fluxconf #lightwight windows manager
> # aptitude install dillo #lightweight browser
> # aptitude install xfe #lightweight file manager
> # apttitude install
synaptic # To install eset & esetroot
> Change /etc/X11/xorg.conf:
> # dpkg-reconfigure xserver-xorg #guided setup
> Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline
> values)
> X-server starts fine under native Ubuntu Server kernel and fluxbox
> is completely functional.
>
> Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
>
> dmesg output :-
> . . . . . .
>
> [ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic
> 0 pin 16 triggering 1 polarity 1
> [ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 43.710523] [drm] Initialized drm 1.1.0 20060810
> [ 43.758245] pci 0000:01:00.0: setting latency timer to 64
> [ 43.758433] [drm] Initialized radeon 1.31.0
20080528 for
> 0000:01:00.0 on minor 0
> [ 43.763134] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035133] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035198] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.061841] [drm] Setting GART location based on new memory map
> [ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
> [ 44.095805] [drm] Loading RV730/RV740 CP Microcode
> [ 44.110868] [drm] Resetting GPU
> [ 44.215007] [drm] writeback test failed
> [ 79.050085] [drm] Resetting
GPU
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
>
Xorg.0.log :-
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX:
> reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) RADEON(0): Setting screen physical size to 338 x 270
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org
Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "us"
> (**) AT Translated Set 2 keyboard: xkb_layout: "us"
> (II) config/hal: Adding input device Macintosh mouse button
emulation
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Configuring as mouse
> (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
> (**) Macintosh mouse button emulation: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE)
> (**) Macintosh mouse button emulation: (accel) keeping acceleration
> scheme 1
> (**) Macintosh mouse button emulation: (accel) filter chain
> progression: 2.00
> (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
> (**)
Macintosh mouse button emulation: (accel) set acceleration profile 0
> (II) config/hal: Adding input device HID 062a:0001
> (**) HID 062a:0001: always reports core events
> (**) HID 062a:0001: Device: "/dev/input/event4"
> (II) HID 062a:0001: Found 5 mouse buttons
> (II) HID 062a:0001: Found x and y relative axes
> (II) HID 062a:0001: Configuring as mouse
> (**) HID 062a:0001: YAxisMapping: buttons 4 and 5
> (**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
> (**) HID 062a:0001: (accel) keeping acceleration scheme 1
> (**) HID 062a:0001: (accel) filter chain progression: 2.00
> (**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
> (**) HID 062a:0001: (accel) set acceleration profile 0
>
>
Boris.
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 14529 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-24 5:54 ` Boris Derzhavets
@ 2009-09-24 16:48 ` Konrad Rzeszutek Wilk
2009-09-24 17:17 ` Boris Derzhavets
2009-09-24 17:52 ` Jeremy Fitzhardinge
0 siblings, 2 replies; 13+ messages in thread
From: Konrad Rzeszutek Wilk @ 2009-09-24 16:48 UTC (permalink / raw)
To: Boris Derzhavets; +Cc: Jeremy Fitzhardinge, Xen-devel
On Wed, Sep 23, 2009 at 10:54:09PM -0700, Boris Derzhavets wrote:
> Sorry , there is difference in dmesg reports under xen and as vanilla.
>
> dmesg under xen:-
>
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> -> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
> dmesg 2.6.31 vanilla:-
>
> [ 36.941430] [drm] Initialized drm 1.1.0 20060810
> [ 36.988225] pci 0000:01:00.0: setting latency timer to 64
> [ 36.988341] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
> [ 36.989222] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.210900] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.210940] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.210976] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.232744] [drm] Setting GART location based on new memory map
> [ 37.248205] [drm] Loading RV730/RV740 PFP Microcode
> [ 37.248227] [drm] Loading RV730/RV740 CP Microcode
> [ 37.263281] [drm] Resetting GPU
> -> [ 37.263336] [drm] writeback test succeeded in 1 usecs
I think I know why this is not working.
The DRM and its AGP modules call virt_to_gart and gart_to_virt, which is defined as:
#define virt_to_gart(x) (phys_to_gart(virt_to_phys(x)))
#define gart_to_virt(x) (phys_to_virt(gart_to_phys(x)))
and phys_to_gart and gart_to_phys are:
#define phys_to_gart(x) swiotlb_phys_to_bus(NULL, (x))
#define gart_to_phys(x) swiotlb_bus_to_phys(NULL, (x))
The swiotlb_* calls do return the wrong information when the
kernel is running under Xen.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-24 16:48 ` Konrad Rzeszutek Wilk
@ 2009-09-24 17:17 ` Boris Derzhavets
2009-09-24 19:37 ` Jeremy Fitzhardinge
2009-09-24 17:52 ` Jeremy Fitzhardinge
1 sibling, 1 reply; 13+ messages in thread
From: Boris Derzhavets @ 2009-09-24 17:17 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Jeremy Fitzhardinge, Xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 3357 bytes --]
It happens at Xen 3.4.1 Dom0 (the most recent 2.6.31)
on top F11 and at Xen 3.5 Dom0 (2.6.31commit 398b4b4cabdb27c06a7b8214c2044347ffc08c49 )
on top Ubuntu 9.04 Server.
However , X-Server starts at Dom0 on top of F11 and requires DRM get disabled in 2.6.31 pvops kernel in Xen 3.5 Dom0 on top of Ubuntu 9.04 Server for successful startup. It's Xorg 1.6 version in both cases.
Boris.
--- On Thu, 9/24/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>, "Xen-devel" <xen-devel@lists.xensource.com>
Date: Thursday, September 24, 2009, 12:48 PM
On Wed, Sep 23, 2009 at 10:54:09PM -0700, Boris Derzhavets wrote:
> Sorry , there is difference in dmesg reports under xen and as vanilla.
>
> dmesg under xen:-
>
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> -> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
> dmesg 2.6.31 vanilla:-
>
> [ 36.941430] [drm] Initialized drm 1.1.0 20060810
> [ 36.988225] pci 0000:01:00.0: setting latency timer to 64
> [ 36.988341] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
> [ 36.989222] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.210900] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.210940] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.210976] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> [ 37.232744] [drm] Setting GART location based on new memory map
> [ 37.248205] [drm] Loading RV730/RV740 PFP Microcode
> [ 37.248227] [drm] Loading RV730/RV740 CP Microcode
> [ 37.263281] [drm] Resetting GPU
> -> [ 37.263336] [drm] writeback test succeeded in 1 usecs
I think I know why this is not working.
The DRM and its AGP modules call virt_to_gart and gart_to_virt, which is defined as:
#define virt_to_gart(x) (phys_to_gart(virt_to_phys(x)))
#define gart_to_virt(x) (phys_to_virt(gart_to_phys(x)))
and phys_to_gart and gart_to_phys are:
#define phys_to_gart(x) swiotlb_phys_to_bus(NULL, (x))
#define gart_to_phys(x) swiotlb_bus_to_phys(NULL, (x))
The swiotlb_* calls do return the wrong information when the
kernel is running under Xen.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 4263 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-24 17:17 ` Boris Derzhavets
@ 2009-09-24 19:37 ` Jeremy Fitzhardinge
0 siblings, 0 replies; 13+ messages in thread
From: Jeremy Fitzhardinge @ 2009-09-24 19:37 UTC (permalink / raw)
To: Boris Derzhavets; +Cc: Xen-devel, Konrad Rzeszutek Wilk
On 09/24/09 10:17, Boris Derzhavets wrote:
> It happens at Xen 3.4.1 Dom0 (the most recent 2.6.31)
> on top F11 and at Xen 3.5 Dom0 (2.6.31commit
> 398b4b4cabdb27c06a7b8214c2044347ffc08c49 )
> on top Ubuntu 9.04 Server.
> However , X-Server starts at Dom0 on top of F11 and requires DRM get
> disabled in 2.6.31 pvops kernel in Xen 3.5 Dom0 on top of Ubuntu 9.04
> Server for successful startup. It's Xorg 1.6 version in both cases.
>
I just committed a change to make the AGP phys<->bus conversions do the
right thing.
J
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-24 16:48 ` Konrad Rzeszutek Wilk
2009-09-24 17:17 ` Boris Derzhavets
@ 2009-09-24 17:52 ` Jeremy Fitzhardinge
1 sibling, 0 replies; 13+ messages in thread
From: Jeremy Fitzhardinge @ 2009-09-24 17:52 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Boris Derzhavets, Xen-devel
On 09/24/09 09:48, Konrad Rzeszutek Wilk wrote:
> On Wed, Sep 23, 2009 at 10:54:09PM -0700, Boris Derzhavets wrote:
>
>> Sorry , there is difference in dmesg reports under xen and as vanilla.
>>
>> dmesg under xen:-
>>
>> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 244.157265] [drm] Setting GART location based on new memory map
>> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
>> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
>> [ 244.205974] [drm] Resetting GPU
>> -> [ 244.310103] [drm] writeback test failed
>> [ 251.220092] [drm] Resetting GPU
>>
>> dmesg 2.6.31 vanilla:-
>>
>> [ 36.941430] [drm] Initialized drm 1.1.0 20060810
>> [ 36.988225] pci 0000:01:00.0: setting latency timer to 64
>> [ 36.988341] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
>> [ 36.989222] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 37.210900] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 37.210940] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 37.210976] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>> [ 37.232744] [drm] Setting GART location based on new memory map
>> [ 37.248205] [drm] Loading RV730/RV740 PFP Microcode
>> [ 37.248227] [drm] Loading RV730/RV740 CP Microcode
>> [ 37.263281] [drm] Resetting GPU
>> -> [ 37.263336] [drm] writeback test succeeded in 1 usecs
>>
> I think I know why this is not working.
>
> The DRM and its AGP modules call virt_to_gart and gart_to_virt, which is defined as:
>
> #define virt_to_gart(x) (phys_to_gart(virt_to_phys(x)))
> #define gart_to_virt(x) (phys_to_virt(gart_to_phys(x)))
> and phys_to_gart and gart_to_phys are:
> #define phys_to_gart(x) swiotlb_phys_to_bus(NULL, (x))
> #define gart_to_phys(x) swiotlb_bus_to_phys(NULL, (x))
>
> The swiotlb_* calls do return the wrong information when the
> kernel is running under Xen.
>
Ah, yes. They used to be the right thing to call. I guess we can put
in something hacky to get things going for now: (xen_pv_domain() ?
xen_swiotlb_bus_to_phys(NULL, (x) : (x)).
But it might be time to bite the bullet:
In this current merge window these functions are removed altogether, in
favour of making the dri drivers use the dma-mapping api properly to do
all those conversions. AFAIK the only driver so converted is the Intel
graphics one, and then only when the Intel IOMMU is configured in.
However, in discussions with the the dri folks I had no objection to
making it unconditional and adding the changes to other drivers (so long
as we can test them, since normal hardware configs won't generally have
any IOMMU for typical gfx hardware).
J
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
@ 2009-09-24 19:59 Boris Derzhavets
2009-09-24 21:02 ` Bruce Edge
0 siblings, 1 reply; 13+ messages in thread
From: Boris Derzhavets @ 2009-09-24 19:59 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 1270 bytes --]
Kernel been rebuilt with DRM support now works fine at Xen 3.5 Dom0 on top of Ubuntu 9.04 Server. X-sever starts with no problems
Thanks
Boris.
--- On Thu, 9/24/09, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
From: Jeremy Fitzhardinge <jeremy@goop.org>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Thursday, September 24, 2009, 3:37 PM
On 09/24/09 10:17, Boris Derzhavets wrote:
> It happens at Xen 3.4.1 Dom0 (the most recent 2.6.31)
> on top F11 and at Xen 3.5 Dom0 (2.6.31commit
> 398b4b4cabdb27c06a7b8214c2044347ffc08c49 )
> on top Ubuntu 9.04 Server.
> However , X-Server starts at Dom0 on top of F11 and requires DRM get
> disabled in 2.6.31 pvops kernel in Xen 3.5 Dom0 on top of Ubuntu 9.04
> Server for successful startup. It's Xorg 1.6 version in both cases.
>
I just committed a change to make the AGP phys<->bus conversions do the
right thing.
J
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 1858 bytes --]
[-- Attachment #2: dmesg.log.b6ba0160515df96cf572f5160c471b65f5f37045.gz --]
[-- Type: application/gzip, Size: 13286 bytes --]
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-24 19:59 Boris Derzhavets
@ 2009-09-24 21:02 ` Bruce Edge
2009-09-25 5:18 ` Boris Derzhavets
0 siblings, 1 reply; 13+ messages in thread
From: Bruce Edge @ 2009-09-24 21:02 UTC (permalink / raw)
To: Xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 1708 bytes --]
Boris,
What did you use for the Xen 3.5 installation on Ubuntu? Is there a ppa
source package available?
Thanks
-Bruce
On Thu, Sep 24, 2009 at 12:59 PM, Boris Derzhavets <bderzhavets@yahoo.com>wrote:
> Kernel been rebuilt with DRM support now works fine at Xen 3.5 Dom0 on top
> of Ubuntu 9.04 Server. X-sever starts with no problems
>
> Thanks
> Boris.
>
> --- On *Thu, 9/24/09, Jeremy Fitzhardinge <jeremy@goop.org>* wrote:
>
>
> From: Jeremy Fitzhardinge <jeremy@goop.org>
> Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 (
> 2.6.31) on top of Ubuntu 9.04 Server
> To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <
> konrad.wilk@oracle.com>
> Date: Thursday, September 24, 2009, 3:37 PM
>
>
> On 09/24/09 10:17, Boris Derzhavets wrote:
> > It happens at Xen 3.4.1 Dom0 (the most recent 2.6.31)
> > on top F11 and at Xen 3.5 Dom0 (2.6.31commit
> > 398b4b4cabdb27c06a7b8214c2044347ffc08c49 )
> > on top Ubuntu 9.04 Server.
> > However , X-Server starts at Dom0 on top of F11 and requires DRM get
> > disabled in 2.6.31 pvops kernel in Xen 3.5 Dom0 on top of Ubuntu 9.04
> > Server for successful startup. It's Xorg 1.6 version in both cases.
> >
>
> I just committed a change to make the AGP phys<->bus conversions do the
> right thing.
>
> J
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
[-- Attachment #1.2: Type: text/html, Size: 3191 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-24 21:02 ` Bruce Edge
@ 2009-09-25 5:18 ` Boris Derzhavets
2009-09-25 5:26 ` Bruce Edge
0 siblings, 1 reply; 13+ messages in thread
From: Boris Derzhavets @ 2009-09-25 5:18 UTC (permalink / raw)
To: Xen-devel, Bruce Edge
[-- Attachment #1.1: Type: text/plain, Size: 3103 bytes --]
Just do the same for xen-unstable.hg :-
http://bderzhavets.wordpress.com/2009/06/25/setup-xen-3-4-1-dom0-on-top-of-ubuntu-9-04-server-via-marc-a-dahlhauss-udev-patch/
Details :-
# cd /usr/src
# hg clone http://xenbits.xensource.com/xen-unstable.hg
# cd xen-unstable.hg
Set in Config.mk
PYTHON = python
PYTHON_PREFIX_ARG =
Tuning Config.mk results Xen packages to be placed into
/usr/local/lib/python2.6/dist-packages due to Changeset 19594 in
xen-3.4-testing.hg. Otherwise, Xen packages would go to
/usr/lib/python2.6/site-packages, which is not default location for
python 2.6 on Ubuntu 9.04 ( vs F11 ). Thus you won’t be able to start
xend in Dom0. Same thing happens when building Xen Unstable on Ubuntu
9.04 Server.
Actually, you don't need any PPA to make direct build Xen on Ubuntu 9.04 Server ( or 9.10). All what is required is tuning Config.mk per CS 19594.
Boris.
--- On Thu, 9/24/09, Bruce Edge <bruce.edge@gmail.com> wrote:
From: Bruce Edge <bruce.edge@gmail.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Xen-devel" <xen-devel@lists.xensource.com>
Date: Thursday, September 24, 2009, 5:02 PM
Boris,
What did you use for the Xen 3.5 installation on Ubuntu? Is there a ppa source package available?
Thanks
-Bruce
On Thu, Sep 24, 2009 at 12:59 PM, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
Kernel been rebuilt with DRM support now works fine at Xen 3.5 Dom0 on top of Ubuntu 9.04 Server. X-sever starts with no problems
Thanks
Boris.
--- On Thu, 9/24/09, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
From: Jeremy Fitzhardinge <jeremy@goop.org>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Thursday, September 24, 2009, 3:37 PM
On 09/24/09 10:17, Boris Derzhavets wrote:
> It happens at Xen 3.4.1 Dom0 (the most recent
2.6.31)
> on top F11 and at Xen 3.5 Dom0 (2.6.31commit
> 398b4b4cabdb27c06a7b8214c2044347ffc08c49 )
> on top Ubuntu 9.04 Server.
> However , X-Server starts at Dom0 on top of F11 and requires DRM get
> disabled in 2.6.31 pvops kernel in Xen 3.5 Dom0 on top of Ubuntu 9.04
> Server for successful startup. It's Xorg 1.6 version in both cases.
>
I just committed a change to make the AGP phys<->bus conversions do the
right thing.
J
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 5710 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-25 5:18 ` Boris Derzhavets
@ 2009-09-25 5:26 ` Bruce Edge
2009-09-25 8:18 ` Pasi Kärkkäinen
0 siblings, 1 reply; 13+ messages in thread
From: Bruce Edge @ 2009-09-25 5:26 UTC (permalink / raw)
To: Boris Derzhavets; +Cc: Xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 4039 bytes --]
It'd be nice to get a package set built from this. Maybe I'll try using
prevu and port the debian patch from the 3.4.1 ppa package to xen unstable.
That would make it a lot more convenient to deploy on multiple machines.
-Bruce
On Thu, Sep 24, 2009 at 10:18 PM, Boris Derzhavets <bderzhavets@yahoo.com>wrote:
> Just do the same for xen-unstable.hg :-
>
>
> http://bderzhavets.wordpress.com/2009/06/25/setup-xen-3-4-1-dom0-on-top-of-ubuntu-9-04-server-via-marc-a-dahlhauss-udev-patch/
>
> Details :-
>
> # cd /usr/src
> # hg clone http://xenbits.xensource.com/xen-unstable.hg
> # cd xen-unstable.hg
> Set in Config.mk
> PYTHON = python
> PYTHON_PREFIX_ARG =
>
> Tuning Config.mk results Xen packages to be placed into
> /usr/local/lib/python2.6/dist-packages due to Changeset 19594 in
> xen-3.4-testing.hg. Otherwise, Xen packages would go to
> /usr/lib/python2.6/site-packages, which is not default location for python
> 2.6 on Ubuntu 9.04 ( vs F11 ). Thus you won’t be able to start xend in Dom0.
> Same thing happens when building Xen Unstable on Ubuntu 9.04 Server.
>
>
> Actually, you don't need any PPA to make direct build Xen on Ubuntu 9.04
> Server ( or 9.10). All what is required is tuning Config.mk per CS 19594.
>
> Boris.
>
>
>
>
> --- On *Thu, 9/24/09, Bruce Edge <bruce.edge@gmail.com>* wrote:
>
>
> From: Bruce Edge <bruce.edge@gmail.com>
> Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 (
> 2.6.31) on top of Ubuntu 9.04 Server
> To: "Xen-devel" <xen-devel@lists.xensource.com>
> Date: Thursday, September 24, 2009, 5:02 PM
>
>
> Boris,
> What did you use for the Xen 3.5 installation on Ubuntu? Is there a ppa
> source package available?
>
> Thanks
>
> -Bruce
>
> On Thu, Sep 24, 2009 at 12:59 PM, Boris Derzhavets <bderzhavets@yahoo.com<http://mc/compose?to=bderzhavets@yahoo.com>
> > wrote:
>
>> Kernel been rebuilt with DRM support now works fine at Xen 3.5 Dom0 on top
>> of Ubuntu 9.04 Server. X-sever starts with no problems
>>
>> Thanks
>> Boris.
>>
>> --- On *Thu, 9/24/09, Jeremy Fitzhardinge <jeremy@goop.org<http://mc/compose?to=jeremy@goop.org>
>> >* wrote:
>>
>>
>> From: Jeremy Fitzhardinge <jeremy@goop.org<http://mc/compose?to=jeremy@goop.org>
>> >
>> Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 (
>> 2.6.31) on top of Ubuntu 9.04 Server
>> To: "Boris Derzhavets" <bderzhavets@yahoo.com<http://mc/compose?to=bderzhavets@yahoo.com>
>> >
>> Cc: "Xen-devel" <xen-devel@lists.xensource.com<http://mc/compose?to=xen-devel@lists.xensource.com>>,
>> "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com<http://mc/compose?to=konrad.wilk@oracle.com>
>> >
>> Date: Thursday, September 24, 2009, 3:37 PM
>>
>>
>> On 09/24/09 10:17, Boris Derzhavets wrote:
>> > It happens at Xen 3.4.1 Dom0 (the most recent 2.6.31)
>> > on top F11 and at Xen 3.5 Dom0 (2.6.31commit
>> > 398b4b4cabdb27c06a7b8214c2044347ffc08c49 )
>> > on top Ubuntu 9.04 Server.
>> > However , X-Server starts at Dom0 on top of F11 and requires DRM get
>> > disabled in 2.6.31 pvops kernel in Xen 3.5 Dom0 on top of Ubuntu 9.04
>> > Server for successful startup. It's Xorg 1.6 version in both cases.
>> >
>>
>> I just committed a change to make the AGP phys<->bus conversions do the
>> right thing.
>>
>> J
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com>
>> http://lists.xensource.com/xen-devel
>>
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com>
>> http://lists.xensource.com/xen-devel
>>
>>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
>
[-- Attachment #1.2: Type: text/html, Size: 6697 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-25 5:26 ` Bruce Edge
@ 2009-09-25 8:18 ` Pasi Kärkkäinen
0 siblings, 0 replies; 13+ messages in thread
From: Pasi Kärkkäinen @ 2009-09-25 8:18 UTC (permalink / raw)
To: Bruce Edge; +Cc: Boris Derzhavets, Xen-devel
On Thu, Sep 24, 2009 at 10:26:32PM -0700, Bruce Edge wrote:
> It'd be nice to get a package set built from this. Maybe I'll try using
> prevu and port the debian patch from the 3.4.1 ppa package to xen unstable.
> That would make it a lot more convenient to deploy on multiple machines.
>
Just remember the latest Debian xen packages are broken; they have HVM
disabled because the maintainer didn't like how Qemu was packaged..
-- Pasi
> -Bruce
>
> On Thu, Sep 24, 2009 at 10:18 PM, Boris Derzhavets <bderzhavets@yahoo.com>wrote:
>
> > Just do the same for xen-unstable.hg :-
> >
> >
> > http://bderzhavets.wordpress.com/2009/06/25/setup-xen-3-4-1-dom0-on-top-of-ubuntu-9-04-server-via-marc-a-dahlhauss-udev-patch/
> >
> > Details :-
> >
> > # cd /usr/src
> > # hg clone http://xenbits.xensource.com/xen-unstable.hg
> > # cd xen-unstable.hg
> > Set in Config.mk
> > PYTHON = python
> > PYTHON_PREFIX_ARG =
> >
> > Tuning Config.mk results Xen packages to be placed into
> > /usr/local/lib/python2.6/dist-packages due to Changeset 19594 in
> > xen-3.4-testing.hg. Otherwise, Xen packages would go to
> > /usr/lib/python2.6/site-packages, which is not default location for python
> > 2.6 on Ubuntu 9.04 ( vs F11 ). Thus you won?t be able to start xend in Dom0.
> > Same thing happens when building Xen Unstable on Ubuntu 9.04 Server.
> >
> >
> > Actually, you don't need any PPA to make direct build Xen on Ubuntu 9.04
> > Server ( or 9.10). All what is required is tuning Config.mk per CS 19594.
> >
> > Boris.
> >
> >
> >
> >
> > --- On *Thu, 9/24/09, Bruce Edge <bruce.edge@gmail.com>* wrote:
> >
> >
> > From: Bruce Edge <bruce.edge@gmail.com>
> > Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 (
> > 2.6.31) on top of Ubuntu 9.04 Server
> > To: "Xen-devel" <xen-devel@lists.xensource.com>
> > Date: Thursday, September 24, 2009, 5:02 PM
> >
> >
> > Boris,
> > What did you use for the Xen 3.5 installation on Ubuntu? Is there a ppa
> > source package available?
> >
> > Thanks
> >
> > -Bruce
> >
> > On Thu, Sep 24, 2009 at 12:59 PM, Boris Derzhavets <bderzhavets@yahoo.com<http://mc/compose?to=bderzhavets@yahoo.com>
> > > wrote:
> >
> >> Kernel been rebuilt with DRM support now works fine at Xen 3.5 Dom0 on top
> >> of Ubuntu 9.04 Server. X-sever starts with no problems
> >>
> >> Thanks
> >> Boris.
> >>
> >> --- On *Thu, 9/24/09, Jeremy Fitzhardinge <jeremy@goop.org<http://mc/compose?to=jeremy@goop.org>
> >> >* wrote:
> >>
> >>
> >> From: Jeremy Fitzhardinge <jeremy@goop.org<http://mc/compose?to=jeremy@goop.org>
> >> >
> >> Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 (
> >> 2.6.31) on top of Ubuntu 9.04 Server
> >> To: "Boris Derzhavets" <bderzhavets@yahoo.com<http://mc/compose?to=bderzhavets@yahoo.com>
> >> >
> >> Cc: "Xen-devel" <xen-devel@lists.xensource.com<http://mc/compose?to=xen-devel@lists.xensource.com>>,
> >> "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com<http://mc/compose?to=konrad.wilk@oracle.com>
> >> >
> >> Date: Thursday, September 24, 2009, 3:37 PM
> >>
> >>
> >> On 09/24/09 10:17, Boris Derzhavets wrote:
> >> > It happens at Xen 3.4.1 Dom0 (the most recent 2.6.31)
> >> > on top F11 and at Xen 3.5 Dom0 (2.6.31commit
> >> > 398b4b4cabdb27c06a7b8214c2044347ffc08c49 )
> >> > on top Ubuntu 9.04 Server.
> >> > However , X-Server starts at Dom0 on top of F11 and requires DRM get
> >> > disabled in 2.6.31 pvops kernel in Xen 3.5 Dom0 on top of Ubuntu 9.04
> >> > Server for successful startup. It's Xorg 1.6 version in both cases.
> >> >
> >>
> >> I just committed a change to make the AGP phys<->bus conversions do the
> >> right thing.
> >>
> >> J
> >>
> >> _______________________________________________
> >> Xen-devel mailing list
> >> Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com>
> >> http://lists.xensource.com/xen-devel
> >>
> >>
> >>
> >> _______________________________________________
> >> Xen-devel mailing list
> >> Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com>
> >> http://lists.xensource.com/xen-devel
> >>
> >>
> >
> > -----Inline Attachment Follows-----
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com>
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
@ 2009-09-24 16:40 Boris Derzhavets
0 siblings, 0 replies; 13+ messages in thread
From: Boris Derzhavets @ 2009-09-24 16:40 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 13298 bytes --]
To get X-server working on Ubuntu 9.04 Server (Radeon HD 4650 plugged in) I just disabled DRM :-
-*- /dev/agpgart (AGP Support) ---> x x
< > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---> x x
<M> Lowlevel video output switch controls x x
<*> Support for frame buffer devices ---> x x
-*- Backlight & LCD device support ----> x x
Display device support ---> x x
Console display driver support ---> x x
and rebuilt 2.6.31 kernel.
I also have to mention, that kernel modeset Radeon initializing at Xen 3.4.1 Dom0 ( 2.6.31) shows failure to load radeon_kms driver ( per dmesg report ) as well. But, by some reasons X-Server on F11 ignore this issue and comes up.
If dmesg report (drm errors to initialize kernel modeset for Radeon) on F11 is wanted, i will post it.
Boris.
9/24/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Jeremy Fitzhardinge" <jeremy@goop.org>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Thursday, September 24, 2009, 1:54 AM
Sorry , there is difference in dmesg reports under xen and as vanilla.
dmesg under xen:-
[ 243.858191] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 243.858263] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132051] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132115] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132181] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.157265] [drm] Setting GART location based on new memory map
[ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
[ 244.190911] [drm] Loading RV730/RV740 CP Microcode
[ 244.205974] [drm] Resetting
GPU
-> [ 244.310103] [drm] writeback test failed
[ 251.220092] [drm] Resetting GPU
dmesg 2.6.31 vanilla:-
[ 36.941430] [drm] Initialized drm 1.1.0 20060810
[ 36.988225] pci 0000:01:00.0: setting latency timer to 64
[ 36.988341] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 36.989222] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.210900] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.210940] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.210976] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 37.232744] [drm] Setting GART location based on new memory map
[ 37.248205] [drm] Loading RV730/RV740 PFP
Microcode
[ 37.248227] [drm] Loading RV730/RV740 CP Microcode
[ 37.263281] [drm] Resetting GPU
-> [ 37.263336] [drm] writeback test succeeded in 1 usecs
Boris
--- On Thu, 9/24/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Jeremy Fitzhardinge" <jeremy@goop.org>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Thursday, September 24, 2009, 1:33 AM
> Does it work with 2.6.31 running without Xen?
Works fine. Logs are attached.
>How do the log files compare?
Look the same.
I was wrong regarding time of X-server startup,
in both case after login in text console.
# startx
Boris
--- On Wed, 9/23/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Jeremy Fitzhardinge" <jeremy@goop.org>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk"
<konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 4:25
PM
>I assume you're saying that it fails with 2.6.31-pvops dom0?
Yes.
>How does it fail? Is it completely non-functional?
Yes, it is completely non-functional.
>Does the whole system crash?
No, just in text mode.
> Or does X simply fail to start?
No. It seems to be running.
>Or it does start but is crippled in some way?
It starts due to logs content during system boot up ,
like on F11, where everything is going fine.
I attached both dmesg.log and Xorg.0.log to previous message for Ubuntu 9.04 Server.
> Does it work with 2.6.31 running without Xen? How do the log files compare?
I will check it tomorrow.
Boris.
--- On Wed, 9/23/09, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
From: Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 3:27 PM
On 09/23/09 08:45, Boris Derzhavets wrote:
> Video card Radeon HD 4560.
X-server starts fine under native
> 2.6.28-11-server
> ubuntu kernel.
>
I assume you're saying that it fails with 2.6.31-pvops dom0? How does
it fail? Is it completely non-functional? Does the whole system
crash? Or does X simply fail to start? Or it does start but is
crippled in some way?
Does it work with 2.6.31 running without Xen? How do the log files compare?
Thanks,
J
>
> X-Windows Setup :-
>
> Downsize the system:
> vi /etc/default/linux-restricted-modules-common:
> DISABLED_MODULES=”ath_hal fc fglrx ltm nv” Install the X11 bare bone:
>
> # aptitude install x-window-system-core
> # aptitude install fluxbox fluxconf #lightwight windows manager
> # aptitude install dillo #lightweight browser
> # aptitude install xfe #lightweight file manager
> # apttitude install
synaptic # To install eset & esetroot
> Change /etc/X11/xorg.conf:
> # dpkg-reconfigure xserver-xorg #guided setup
> Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline
> values)
> X-server starts fine under native Ubuntu Server kernel and fluxbox
> is completely functional.
>
> Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
>
> dmesg output :-
> . . . . . .
>
> [ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic
> 0 pin 16 triggering 1 polarity 1
> [ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 43.710523] [drm] Initialized drm 1.1.0 20060810
> [ 43.758245] pci 0000:01:00.0: setting latency timer to 64
> [ 43.758433] [drm] Initialized radeon 1.31.0
20080528 for
> 0000:01:00.0 on minor 0
> [ 43.763134] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035133] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035198] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.061841] [drm] Setting GART location based on new memory map
> [ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
> [ 44.095805] [drm] Loading RV730/RV740 CP Microcode
> [ 44.110868] [drm] Resetting GPU
> [ 44.215007] [drm] writeback test failed
> [ 79.050085] [drm] Resetting
GPU
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
>
Xorg.0.log :-
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX:
> reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) RADEON(0): Setting screen physical size to 338 x 270
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org
Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "us"
> (**) AT Translated Set 2 keyboard: xkb_layout: "us"
> (II) config/hal: Adding input device Macintosh mouse button
emulation
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Configuring as mouse
> (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
> (**) Macintosh mouse button emulation: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE)
> (**) Macintosh mouse button emulation: (accel) keeping acceleration
> scheme 1
> (**) Macintosh mouse button emulation: (accel) filter chain
> progression: 2.00
> (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
> (**)
Macintosh mouse button emulation: (accel) set acceleration profile 0
> (II) config/hal: Adding input device HID 062a:0001
> (**) HID 062a:0001: always reports core events
> (**) HID 062a:0001: Device: "/dev/input/event4"
> (II) HID 062a:0001: Found 5 mouse buttons
> (II) HID 062a:0001: Found x and y relative axes
> (II) HID 062a:0001: Configuring as mouse
> (**) HID 062a:0001: YAxisMapping: buttons 4 and 5
> (**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
> (**) HID 062a:0001: (accel) keeping acceleration scheme 1
> (**) HID 062a:0001: (accel) filter chain progression: 2.00
> (**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
> (**) HID 062a:0001: (accel) set acceleration profile 0
>
>
Boris.
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 18258 bytes --]
[-- Attachment #2: dmesg.no-drm.gz --]
[-- Type: application/gzip, Size: 13339 bytes --]
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
@ 2009-09-23 19:27 Jeremy Fitzhardinge
2009-09-23 20:25 ` Boris Derzhavets
0 siblings, 1 reply; 13+ messages in thread
From: Jeremy Fitzhardinge @ 2009-09-23 19:27 UTC (permalink / raw)
To: Boris Derzhavets; +Cc: Xen-devel, Konrad Rzeszutek Wilk
On 09/23/09 08:45, Boris Derzhavets wrote:
> Video card Radeon HD 4560. X-server starts fine under native
> 2.6.28-11-server
> ubuntu kernel.
>
I assume you're saying that it fails with 2.6.31-pvops dom0? How does
it fail? Is it completely non-functional? Does the whole system
crash? Or does X simply fail to start? Or it does start but is
crippled in some way?
Does it work with 2.6.31 running without Xen? How do the log files compare?
Thanks,
J
>
> X-Windows Setup :-
>
> Downsize the system:
> vi /etc/default/linux-restricted-modules-common:
> DISABLED_MODULES=”ath_hal fc fglrx ltm nv” Install the X11 bare bone:
>
> # aptitude install x-window-system-core
> # aptitude install fluxbox fluxconf #lightwight windows manager
> # aptitude install dillo #lightweight browser
> # aptitude install xfe #lightweight file manager
> # apttitude install synaptic # To install eset & esetroot
> Change /etc/X11/xorg.conf:
> # dpkg-reconfigure xserver-xorg #guided setup
> Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline
> values)
> X-server starts fine under native Ubuntu Server kernel and fluxbox
> is completely functional.
>
> Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
>
> dmesg output :-
> . . . . . .
>
> [ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic
> 0 pin 16 triggering 1 polarity 1
> [ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 43.710523] [drm] Initialized drm 1.1.0 20060810
> [ 43.758245] pci 0000:01:00.0: setting latency timer to 64
> [ 43.758433] [drm] Initialized radeon 1.31.0 20080528 for
> 0000:01:00.0 on minor 0
> [ 43.763134] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035133] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035198] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.061841] [drm] Setting GART location based on new memory map
> [ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
> [ 44.095805] [drm] Loading RV730/RV740 CP Microcode
> [ 44.110868] [drm] Resetting GPU
> [ 44.215007] [drm] writeback test failed
> [ 79.050085] [drm] Resetting GPU
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
> Xorg.0.log :-
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX:
> reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) RADEON(0): Setting screen physical size to 338 x 270
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "us"
> (**) AT Translated Set 2 keyboard: xkb_layout: "us"
> (II) config/hal: Adding input device Macintosh mouse button emulation
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Configuring as mouse
> (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
> (**) Macintosh mouse button emulation: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE)
> (**) Macintosh mouse button emulation: (accel) keeping acceleration
> scheme 1
> (**) Macintosh mouse button emulation: (accel) filter chain
> progression: 2.00
> (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
> (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
> (II) config/hal: Adding input device HID 062a:0001
> (**) HID 062a:0001: always reports core events
> (**) HID 062a:0001: Device: "/dev/input/event4"
> (II) HID 062a:0001: Found 5 mouse buttons
> (II) HID 062a:0001: Found x and y relative axes
> (II) HID 062a:0001: Configuring as mouse
> (**) HID 062a:0001: YAxisMapping: buttons 4 and 5
> (**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
> (**) HID 062a:0001: (accel) keeping acceleration scheme 1
> (**) HID 062a:0001: (accel) filter chain progression: 2.00
> (**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
> (**) HID 062a:0001: (accel) set acceleration profile 0
>
> Boris.
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-23 19:27 Jeremy Fitzhardinge
@ 2009-09-23 20:25 ` Boris Derzhavets
0 siblings, 0 replies; 13+ messages in thread
From: Boris Derzhavets @ 2009-09-23 20:25 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 7993 bytes --]
>I assume you're saying that it fails with 2.6.31-pvops dom0?
Yes.
>How does it fail? Is it completely non-functional?
Yes, it is completely non-functional.
>Does the whole system crash?
No, just in text mode.
> Or does X simply fail to start?
No. It seems to be running.
>Or it does start but is crippled in some way?
It starts due to logs content during system boot up ,
like on F11, where everything is going fine.
I attached both dmesg.log and Xorg.0.log to previous message for Ubuntu 9.04 Server.
> Does it work with 2.6.31 running without Xen? How do the log files compare?
I will check it tomorrow.
Boris.
--- On Wed, 9/23/09, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
From: Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 3:27 PM
On 09/23/09 08:45, Boris Derzhavets wrote:
> Video card Radeon HD 4560. X-server starts fine under native
> 2.6.28-11-server
> ubuntu kernel.
>
I assume you're saying that it fails with 2.6.31-pvops dom0? How does
it fail? Is it completely non-functional? Does the whole system
crash? Or does X simply fail to start? Or it does start but is
crippled in some way?
Does it work with 2.6.31 running without Xen? How do the log files compare?
Thanks,
J
>
> X-Windows Setup :-
>
> Downsize the system:
> vi /etc/default/linux-restricted-modules-common:
> DISABLED_MODULES=”ath_hal fc fglrx ltm nv” Install the X11 bare bone:
>
> # aptitude install x-window-system-core
> # aptitude install fluxbox fluxconf #lightwight windows manager
> # aptitude install dillo #lightweight browser
> # aptitude install xfe #lightweight file manager
> # apttitude install synaptic # To install eset & esetroot
> Change /etc/X11/xorg.conf:
> # dpkg-reconfigure xserver-xorg #guided setup
> Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline
> values)
> X-server starts fine under native Ubuntu Server kernel and fluxbox
> is completely functional.
>
> Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
>
> dmesg output :-
> . . . . . .
>
> [ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic
> 0 pin 16 triggering 1 polarity 1
> [ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 43.710523] [drm] Initialized drm 1.1.0 20060810
> [ 43.758245] pci 0000:01:00.0: setting latency timer to 64
> [ 43.758433] [drm] Initialized radeon 1.31.0 20080528 for
> 0000:01:00.0 on minor 0
> [ 43.763134] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035133] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035198] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.061841] [drm] Setting GART location based on new memory map
> [ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
> [ 44.095805] [drm] Loading RV730/RV740 CP Microcode
> [ 44.110868] [drm] Resetting GPU
> [ 44.215007] [drm] writeback test failed
> [ 79.050085] [drm] Resetting GPU
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
> Xorg.0.log :-
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX:
> reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) RADEON(0): Setting screen physical size to 338 x 270
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "us"
> (**) AT Translated Set 2 keyboard: xkb_layout: "us"
> (II) config/hal: Adding input device Macintosh mouse button emulation
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Configuring as mouse
> (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
> (**) Macintosh mouse button emulation: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE)
> (**) Macintosh mouse button emulation: (accel) keeping acceleration
> scheme 1
> (**) Macintosh mouse button emulation: (accel) filter chain
> progression: 2.00
> (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
> (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
> (II) config/hal: Adding input device HID 062a:0001
> (**) HID 062a:0001: always reports core events
> (**) HID 062a:0001: Device: "/dev/input/event4"
> (II) HID 062a:0001: Found 5 mouse buttons
> (II) HID 062a:0001: Found x and y relative axes
> (II) HID 062a:0001: Configuring as mouse
> (**) HID 062a:0001: YAxisMapping: buttons 4 and 5
> (**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
> (**) HID 062a:0001: (accel) keeping acceleration scheme 1
> (**) HID 062a:0001: (accel) filter chain progression: 2.00
> (**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
> (**) HID 062a:0001: (accel) set acceleration profile 0
>
> Boris.
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 9649 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2009-09-25 8:18 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-24 5:33 Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server Boris Derzhavets
2009-09-24 5:54 ` Boris Derzhavets
2009-09-24 16:48 ` Konrad Rzeszutek Wilk
2009-09-24 17:17 ` Boris Derzhavets
2009-09-24 19:37 ` Jeremy Fitzhardinge
2009-09-24 17:52 ` Jeremy Fitzhardinge
-- strict thread matches above, loose matches on Subject: below --
2009-09-24 19:59 Boris Derzhavets
2009-09-24 21:02 ` Bruce Edge
2009-09-25 5:18 ` Boris Derzhavets
2009-09-25 5:26 ` Bruce Edge
2009-09-25 8:18 ` Pasi Kärkkäinen
2009-09-24 16:40 Boris Derzhavets
2009-09-23 19:27 Jeremy Fitzhardinge
2009-09-23 20:25 ` Boris Derzhavets
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.