Re: Possible bug with pass-through hot-plug?

[Simon Horman <horms@verge.net.au>]

On Fri, Oct 09, 2009 at 07:59:18PM +1100, Simon Horman wrote:
> On Fri, Oct 09, 2009 at 10:36:07AM +0200, Tom Rotenberg wrote:
> > Simon,
> > 
> > I think u missed something here... in the regular state, when u do:
> > xm create hvm pci='00:1b.0'
> > 
> > then the device is being assigned the 0x100 slot, which means - qemu
> > will auto-assign the slot.
> > In this case - the hot-remove works fine.
> > 
> > In the other method i tried, when i wanted to register the device on a
> > specific slot (00:1b.0), (in order to reproduce it - u can change
> > qemu to force the devfn to be 1b.0, as i sent in my first mail) - in
> > that case, the device is assigned the slot 00:1b.0, and i see in the
> > Windows device manager, that it got the virtual slot 00:1b.0
> > Now, when i try to hot-remove the device - it doesn't work.
> 
> Ok, I missed that. Without your change does the device appear in the
> device manager? If not could you try my debugging patch and see what it
> reports.
> 
> > Doesn't it reproduce to u? (with the patch i sent, for forcing devfn
> > to be 00:1b.0) ?
> 
> I am able to hot-plug devices into specific slots without your change.
> I'll verify that hot-unplug also works.

hot-unplug is working for me

> N.B: My guests are linux not Windows.
> Although I don't think that makes any difference.