From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: David Miller <davem@davemloft.net>
Cc: Jon Loeliger <jdl@jdl.com>,
Kumar Gopalpet-B05799 <B05799@freescale.com>,
netdev@vger.kernel.org, linuxppc-dev@ozlabs.org,
Andy Fleming <afleming@freescale.com>,
Stephen Hemminger <shemminger@vyatta.com>,
Lennert Buytenhek <buytenh@wantstofly.org>
Subject: [PATCH 3/6] gianfar: Fix build with CONFIG_PM=y
Date: Wed, 11 Nov 2009 03:11:05 +0300 [thread overview]
Message-ID: <20091111001105.GC8817@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20091111001036.GA28576@oksana.dev.rtsoft.ru>
commit fba4ed030cfae7efdb6b79a57b0c5a9d72c9 ("gianfar: Add Multiple
Queue Support") introduced the following build failure:
CC gianfar.o
gianfar.c: In function 'gfar_restore':
gianfar.c:1249: error: request for member 'napi' in something not a structure or union
This patch fixes the issue.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/net/gianfar.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 79c28f5..a5b0038 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1246,7 +1246,7 @@ static int gfar_restore(struct device *dev)
phy_start(priv->phydev);
netif_device_attach(ndev);
- napi_enable(&priv->gfargrp.napi);
+ enable_napi(priv);
return 0;
}
--
1.6.3.3
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: David Miller <davem@davemloft.net>
Cc: Andy Fleming <afleming@freescale.com>, Jon Loeliger <jdl@jdl.com>,
Kumar Gopalpet-B05799 <B05799@freescale.com>,
Lennert Buytenhek <buytenh@wantstofly.org>,
Stephen Hemminger <shemminger@vyatta.com>,
netdev@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: [PATCH 3/6] gianfar: Fix build with CONFIG_PM=y
Date: Wed, 11 Nov 2009 03:11:05 +0300 [thread overview]
Message-ID: <20091111001105.GC8817@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20091111001036.GA28576@oksana.dev.rtsoft.ru>
commit fba4ed030cfae7efdb6b79a57b0c5a9d72c9 ("gianfar: Add Multiple
Queue Support") introduced the following build failure:
CC gianfar.o
gianfar.c: In function 'gfar_restore':
gianfar.c:1249: error: request for member 'napi' in something not a structure or union
This patch fixes the issue.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/net/gianfar.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 79c28f5..a5b0038 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1246,7 +1246,7 @@ static int gfar_restore(struct device *dev)
phy_start(priv->phydev);
netif_device_attach(ndev);
- napi_enable(&priv->gfargrp.napi);
+ enable_napi(priv);
return 0;
}
--
1.6.3.3
next prev parent reply other threads:[~2009-11-11 0:11 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-11 0:10 [PATCH 0/6] gianfar: Some fixes Anton Vorontsov
2009-11-11 0:10 ` Anton Vorontsov
2009-11-11 0:11 ` [PATCH 1/6] skbuff: Do not allow skb recycling with disabled IRQs Anton Vorontsov
2009-11-11 0:11 ` Anton Vorontsov
2009-11-11 0:11 ` [PATCH 2/6] gianfar: Remove 'Interrupt problem!' warning Anton Vorontsov
2009-11-11 0:11 ` Anton Vorontsov
2009-11-11 0:11 ` Anton Vorontsov [this message]
2009-11-11 0:11 ` [PATCH 3/6] gianfar: Fix build with CONFIG_PM=y Anton Vorontsov
2009-11-11 4:27 ` Kumar Gopalpet-B05799
2009-11-11 4:27 ` Kumar Gopalpet-B05799
2009-11-11 0:11 ` [PATCH 4/6] gianfar: Fix thinko in gfar_set_rx_stash_index() Anton Vorontsov
2009-11-11 0:11 ` Anton Vorontsov
2009-11-11 0:11 ` [PATCH 5/6] gianfar: Fix race between gfar_error() and gfar_start_xmit() Anton Vorontsov
2009-11-11 0:11 ` Anton Vorontsov
2009-11-11 0:11 ` [PATCH 6/6] gianfar: Revive SKB recycling Anton Vorontsov
2009-11-11 0:11 ` Anton Vorontsov
2009-11-11 4:20 ` Kumar Gopalpet-B05799
2009-11-11 4:20 ` Kumar Gopalpet-B05799
2009-11-11 15:16 ` [PATCH 0/6] gianfar: Some fixes Kumar Gala
2009-11-12 3:04 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091111001105.GC8817@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=B05799@freescale.com \
--cc=afleming@freescale.com \
--cc=buytenh@wantstofly.org \
--cc=davem@davemloft.net \
--cc=jdl@jdl.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.