From: Jarek Poplawski <jarkao2@gmail.com>
To: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>,
mchan@broadcom.com, kaber@trash.net, netdev@vger.kernel.org
Subject: [PATCH v4] net: Introduce realloc_netdev_mq()
Date: Thu, 3 Dec 2009 21:29:38 +0100 [thread overview]
Message-ID: <20091203202937.GA11436@ami.dom.local> (raw)
In-Reply-To: <4B17EFE3.4080301@gmail.com>
On Thu, Dec 03, 2009 at 06:05:39PM +0100, Eric Dumazet wrote:
> Jarek Poplawski a écrit :
> > On Thu, Dec 03, 2009 at 05:36:40PM +0100, Jarek Poplawski wrote:
> >> On Thu, Dec 03, 2009 at 04:17:43PM +0100, Eric Dumazet wrote:
> >>> if (realloc_netdev_mq(dev, real_queues))
> >>> dev->real_num_tx_queues = real_queues;
> >>>
> >>> In this case the memory error is not fatal.
> >> Good point! We can consider doing this inside the function too?
> >
> > Hmm... Of course, not exactly this - I mean using min().
>
> Sure, allowing to reduce the count in case new allocation failed.
>
> And report an error if caller wanted to increase number of queues and allocation failed.
Hmm... After re-thinking it looks a bit too complex to me. I think,
there is no reason to not report this error since in most cases it
shouldn't be fatal. That's why I skipped this check in the changelog
example. Unless I miss something?
Thanks,
Jarek P.
---------------> (take 4)
This patch separates allocation of TX subqueues from alloc_netdev_mq()
to realloc_netdev_mq() to allow for resizing like in this example:
some_nic_probe()
{
...
dev = alloc_etherdev_mq(sizeof(*bp), 1)
...
if (MSI-X_available && device_supports_MSI-X_and_multiqueue)
realloc_netdev_mq(dev, TX_MAX_RINGS)
register_netdev(dev)
...
}
Alternatively, it can be done in reverse order: starting from the
highest queue_count and reallocating with a lower one.
The main difference is to hold in num_tx_queues something that is
really available, instead of max possible value for all configs, in
case of drivers allocating net_device at the beginning of the probe.
The description of alloc_netdev_mq() is fixed btw.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
---
include/linux/netdevice.h | 1 +
net/core/dev.c | 69 ++++++++++++++++++++++++++++++++------------
2 files changed, 51 insertions(+), 19 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index daf13d3..36cbd53 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1904,6 +1904,7 @@ extern void ether_setup(struct net_device *dev);
extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
void (*setup)(struct net_device *),
unsigned int queue_count);
+extern int realloc_netdev_mq(struct net_device *dev, unsigned int queue_count);
#define alloc_netdev(sizeof_priv, name, setup) \
alloc_netdev_mq(sizeof_priv, name, setup, 1)
extern int register_netdev(struct net_device *dev);
diff --git a/net/core/dev.c b/net/core/dev.c
index e3e18de..1f45bae 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5265,11 +5265,53 @@ static void netdev_init_one_queue(struct net_device *dev,
queue->dev = dev;
}
-static void netdev_init_queues(struct net_device *dev)
+/**
+ * realloc_netdev_mq - (re)allocate network subqueues
+ * @dev: device
+ * @queue_count: the number of subqueues to (re)allocate
+ *
+ * (Re)allocates and initializes subqueue structs for each queue.
+ * It is allowed to use only until register_netdev().
+ * On error previous structs are intact, but dev->real_num_tx_queue is
+ * replaced if the queue_count is lower.
+ */
+int realloc_netdev_mq(struct net_device *dev, unsigned int queue_count)
{
- netdev_init_one_queue(dev, &dev->rx_queue, NULL);
+ struct netdev_queue *tx;
+
+ tx = kcalloc(queue_count, sizeof(struct netdev_queue), GFP_KERNEL);
+ if (!tx) {
+ printk(KERN_ERR "alloc_netdev: Unable to (re)allocate "
+ "tx qdiscs.\n");
+ if (dev->real_num_tx_queues > queue_count)
+ dev->real_num_tx_queues = queue_count;
+
+ return -ENOMEM;
+ }
+
+ kfree(dev->_tx);
+
+ dev->_tx = tx;
+ dev->num_tx_queues = queue_count;
+ dev->real_num_tx_queues = queue_count;
+
netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL);
+
+ return 0;
+}
+EXPORT_SYMBOL(realloc_netdev_mq);
+
+static int netdev_init_queues(struct net_device *dev, unsigned int queue_count)
+{
+ int err = realloc_netdev_mq(dev, queue_count);
+
+ if (err)
+ return err;
+
+ netdev_init_one_queue(dev, &dev->rx_queue, NULL);
spin_lock_init(&dev->tx_global_lock);
+
+ return 0;
}
/**
@@ -5280,13 +5322,12 @@ static void netdev_init_queues(struct net_device *dev)
* @queue_count: the number of subqueues to allocate
*
* Allocates a struct net_device with private data area for driver use
- * and performs basic initialization. Also allocates subquue structs
- * for each queue on the device at the end of the netdevice.
+ * and performs basic initialization. Also allocates subqueue structs
+ * for each queue on the device.
*/
struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
void (*setup)(struct net_device *), unsigned int queue_count)
{
- struct netdev_queue *tx;
struct net_device *dev;
size_t alloc_size;
struct net_device *p;
@@ -5308,16 +5349,12 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
return NULL;
}
- tx = kcalloc(queue_count, sizeof(struct netdev_queue), GFP_KERNEL);
- if (!tx) {
- printk(KERN_ERR "alloc_netdev: Unable to allocate "
- "tx qdiscs.\n");
- goto free_p;
- }
-
dev = PTR_ALIGN(p, NETDEV_ALIGN);
dev->padded = (char *)dev - (char *)p;
+ if (netdev_init_queues(dev, queue_count))
+ goto free_p;
+
if (dev_addr_init(dev))
goto free_tx;
@@ -5325,14 +5362,8 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
dev_net_set(dev, &init_net);
- dev->_tx = tx;
- dev->num_tx_queues = queue_count;
- dev->real_num_tx_queues = queue_count;
-
dev->gso_max_size = GSO_MAX_SIZE;
- netdev_init_queues(dev);
-
INIT_LIST_HEAD(&dev->napi_list);
INIT_LIST_HEAD(&dev->unreg_list);
INIT_LIST_HEAD(&dev->link_watch_list);
@@ -5342,7 +5373,7 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
return dev;
free_tx:
- kfree(tx);
+ kfree(dev->_tx);
free_p:
kfree(p);
next prev parent reply other threads:[~2009-12-03 20:30 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-08 7:18 [RFC] multiqueue changes Eric Dumazet
2009-10-08 9:03 ` Jarek Poplawski
2009-10-08 12:00 ` Jarek Poplawski
2009-10-08 12:13 ` Eric Dumazet
2009-10-08 12:53 ` Jarek Poplawski
2009-10-09 7:58 ` David Miller
2009-10-28 17:27 ` Patrick McHardy
2009-10-28 21:23 ` Jarek Poplawski
2009-10-29 16:37 ` Patrick McHardy
2009-10-29 21:15 ` Jarek Poplawski
2009-10-29 22:12 ` Patrick McHardy
2009-10-30 10:00 ` Jarek Poplawski
2009-10-31 17:25 ` Michael Chan
2009-11-01 13:20 ` Jarek Poplawski
2009-11-02 11:35 ` David Miller
2009-11-02 12:30 ` Jarek Poplawski
2009-11-02 12:39 ` David Miller
2009-11-02 13:02 ` Jarek Poplawski
2009-11-02 13:03 ` Eric Dumazet
2009-11-02 13:09 ` Jarek Poplawski
2009-12-03 14:10 ` [PATCH] net: Introduce realloc_netdev_mq() Jarek Poplawski
2009-12-03 14:39 ` [PATCH v2] " Jarek Poplawski
2009-12-03 15:17 ` Eric Dumazet
2009-12-03 16:36 ` Jarek Poplawski
2009-12-03 16:54 ` Jarek Poplawski
2009-12-03 17:05 ` Eric Dumazet
2009-12-03 19:04 ` [PATCH v3] " Jarek Poplawski
2009-12-03 20:29 ` Jarek Poplawski [this message]
2009-12-03 21:29 ` [PATCH v4] " Eric Dumazet
2009-12-03 21:31 ` David Miller
2009-12-03 21:32 ` Eric Dumazet
2009-12-03 21:51 ` Eric Dumazet
2009-12-03 22:47 ` Jarek Poplawski
2009-12-03 23:04 ` Eric Dumazet
2009-12-04 7:48 ` Jarek Poplawski
2009-12-04 10:51 ` Peter P Waskiewicz Jr
2009-12-04 11:41 ` Jarek Poplawski
2009-12-04 13:01 ` Jarek Poplawski
2009-12-04 13:49 ` Jarek Poplawski
2010-01-16 22:50 ` Michael Chan
2010-01-17 0:36 ` Jarek Poplawski
2010-01-17 16:56 ` Michael Chan
2010-01-17 22:57 ` Jarek Poplawski
2010-01-18 18:29 ` Michael Chan
2010-01-18 19:41 ` Jarek Poplawski
2009-10-09 8:51 ` [RFC] multiqueue changes Jarek Poplawski
2009-10-09 9:40 ` Jarek Poplawski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091203202937.GA11436@ami.dom.local \
--to=jarkao2@gmail.com \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=kaber@trash.net \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.