* [PATCH] - fix speaker output for toshiba nb205 netbooks
@ 2010-01-12 21:58 Nickolas
2010-01-13 8:14 ` Takashi Iwai
0 siblings, 1 reply; 6+ messages in thread
From: Nickolas @ 2010-01-12 21:58 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
this is a quick fix i wrote up a couple days ago to fix speaker output on the Realtek ALC272 codec present in toshiba nb205 netbooks. presently, speaker output doesn't work at all on this model, regardless of settings in the mixer. this is because the current driver thinks the speaker is at nid 0x0c instead of the correct 0x17. i'm not too familiar with this hardware, so i'm not sure that this patch won't have any negative effects for other hardware. it also seems like a messy way of fixing the problem. any comments or suggestions are welcome, as is testing for those who have this board. diffed against the latest git.
Thanks,
Nick
--
Signed-off-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
--- alsa-driver/sound/pci/hda/patch_realtek.c 2010-01-12 08:03:28.000000000 -0500
+++ alsa-driver-b/sound/pci/hda/patch_realtek.c 2010-01-12 16:27:48.000000000 -0500
@@ -192,6 +192,7 @@ enum {
ALC663_ASUS_MODE8,
ALC272_DELL,
ALC272_DELL_ZM1,
+ ALC272_TOSHIBA_N200,
ALC272_SAMSUNG_NC10,
ALC662_AUTO,
ALC662_MODEL_LAST,
@@ -16725,6 +16726,11 @@ static struct hda_verb alc272_dell_init_
{}
};
+static struct hda_verb alc272_toshiba_init_verbs[] = {
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {}
+};
+
static struct hda_verb alc663_mode7_init_verbs[] = {
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
@@ -17255,6 +17261,36 @@ static void alc663_g50v_inithook(struct
alc_mic_automute(codec);
}
+static void alc272_toshiba_speaker_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_jack_detect(codec, 0x21);
+ bits = present ? HDA_AMP_MUTE : 0;
+ snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, bits);
+}
+
+static void alc272_toshiba_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
+ alc272_toshiba_speaker_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc_mic_automute(codec);
+ break;
+ }
+}
+
+static void alc272_toshiba_init_hook(struct hda_codec *codec)
+{
+ alc272_toshiba_speaker_automute(codec);
+ alc_mic_automute(codec);
+}
+
static struct snd_kcontrol_new alc662_ecs_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
ALC262_HIPPO_MASTER_SWITCH,
@@ -17391,7 +17427,7 @@ static struct snd_pci_quirk alc662_cfg_t
SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
+ SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC272_TOSHIBA_N200),
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
@@ -17696,6 +17732,22 @@ static struct alc_config_preset alc662_p
.setup = alc663_m51va_setup,
.init_hook = alc663_m51va_inithook,
},
+ [ALC272_TOSHIBA_N200] = {
+ .mixers = { alc663_asus_21jd_clfe_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
+ .init_verbs = { alc662_init_verbs,
+ alc663_21jd_amic_init_verbs,
+ alc272_toshiba_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc662_dac_nids),
+ .hp_nid = 0x03,
+ .dac_nids = alc662_dac_nids,
+ .dig_out_nid = ALC662_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .channel_mode = alc662_3ST_2ch_modes,
+ .unsol_event = alc272_toshiba_unsol_event,
+ .setup = alc663_mode4_setup,
+ .init_hook = alc272_toshiba_init_hook,
+ },
[ALC272_SAMSUNG_NC10] = {
.mixers = { alc272_nc10_mixer },
.init_verbs = { alc662_init_verbs,
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] - fix speaker output for toshiba nb205 netbooks
2010-01-12 21:58 [PATCH] - fix speaker output for toshiba nb205 netbooks Nickolas
@ 2010-01-13 8:14 ` Takashi Iwai
2010-01-13 16:06 ` Nickolas
0 siblings, 1 reply; 6+ messages in thread
From: Takashi Iwai @ 2010-01-13 8:14 UTC (permalink / raw)
To: Nickolas; +Cc: alsa-devel
At Tue, 12 Jan 2010 16:58:32 -0500,
Nickolas wrote:
>
> this is a quick fix i wrote up a couple days ago to fix speaker
> output on the Realtek ALC272 codec present in toshiba nb205
> netbooks. presently, speaker output doesn't work at all on this
> model, regardless of settings in the mixer. this is because the
> current driver thinks the speaker is at nid 0x0c instead of the
> correct 0x17. i'm not too familiar with this hardware, so i'm not
> sure that this patch won't have any negative effects for other
> hardware. it also seems like a messy way of fixing the problem.
> any comments or suggestions are welcome, as is testing for those who
> have this board. diffed against the latest git.
Thanks for the patch. The change looks safe to me.
But I'm still wondering whether model=auto doesn't work for this device.
Could you try it with the latest driver?
thanks,
Takashi
>
> Thanks,
> Nick
>
> --
>
> Signed-off-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
>
> --- alsa-driver/sound/pci/hda/patch_realtek.c 2010-01-12 08:03:28.000000000 -0500
> +++ alsa-driver-b/sound/pci/hda/patch_realtek.c 2010-01-12 16:27:48.000000000 -0500
> @@ -192,6 +192,7 @@ enum {
> ALC663_ASUS_MODE8,
> ALC272_DELL,
> ALC272_DELL_ZM1,
> + ALC272_TOSHIBA_N200,
> ALC272_SAMSUNG_NC10,
> ALC662_AUTO,
> ALC662_MODEL_LAST,
> @@ -16725,6 +16726,11 @@ static struct hda_verb alc272_dell_init_
> {}
> };
>
> +static struct hda_verb alc272_toshiba_init_verbs[] = {
> + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
> + {}
> +};
> +
> static struct hda_verb alc663_mode7_init_verbs[] = {
> {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
> {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
> @@ -17255,6 +17261,36 @@ static void alc663_g50v_inithook(struct
> alc_mic_automute(codec);
> }
>
> +static void alc272_toshiba_speaker_automute(struct hda_codec *codec)
> +{
> + unsigned int present;
> + unsigned char bits;
> +
> + present = snd_hda_jack_detect(codec, 0x21);
> + bits = present ? HDA_AMP_MUTE : 0;
> + snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
> + HDA_AMP_MUTE, bits);
> +}
> +
> +static void alc272_toshiba_unsol_event(struct hda_codec *codec,
> + unsigned int res)
> +{
> + switch (res >> 26) {
> + case ALC880_HP_EVENT:
> + alc272_toshiba_speaker_automute(codec);
> + break;
> + case ALC880_MIC_EVENT:
> + alc_mic_automute(codec);
> + break;
> + }
> +}
> +
> +static void alc272_toshiba_init_hook(struct hda_codec *codec)
> +{
> + alc272_toshiba_speaker_automute(codec);
> + alc_mic_automute(codec);
> +}
> +
> static struct snd_kcontrol_new alc662_ecs_mixer[] = {
> HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
> ALC262_HIPPO_MASTER_SWITCH,
> @@ -17391,7 +17427,7 @@ static struct snd_pci_quirk alc662_cfg_t
> SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
> SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
> ALC662_3ST_6ch_DIG),
> - SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
> + SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC272_TOSHIBA_N200),
> SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
> SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
> ALC662_3ST_6ch_DIG),
> @@ -17696,6 +17732,22 @@ static struct alc_config_preset alc662_p
> .setup = alc663_m51va_setup,
> .init_hook = alc663_m51va_inithook,
> },
> + [ALC272_TOSHIBA_N200] = {
> + .mixers = { alc663_asus_21jd_clfe_mixer },
> + .cap_mixer = alc662_auto_capture_mixer,
> + .init_verbs = { alc662_init_verbs,
> + alc663_21jd_amic_init_verbs,
> + alc272_toshiba_init_verbs },
> + .num_dacs = ARRAY_SIZE(alc662_dac_nids),
> + .hp_nid = 0x03,
> + .dac_nids = alc662_dac_nids,
> + .dig_out_nid = ALC662_DIGOUT_NID,
> + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
> + .channel_mode = alc662_3ST_2ch_modes,
> + .unsol_event = alc272_toshiba_unsol_event,
> + .setup = alc663_mode4_setup,
> + .init_hook = alc272_toshiba_init_hook,
> + },
> [ALC272_SAMSUNG_NC10] = {
> .mixers = { alc272_nc10_mixer },
> .init_verbs = { alc662_init_verbs,
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] - fix speaker output for toshiba nb205 netbooks
2010-01-13 8:14 ` Takashi Iwai
@ 2010-01-13 16:06 ` Nickolas
2010-01-13 16:17 ` Takashi Iwai
0 siblings, 1 reply; 6+ messages in thread
From: Nickolas @ 2010-01-13 16:06 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
On Wed, 13 Jan 2010 09:14:32 +0100
Takashi Iwai <tiwai@suse.de> wrote:
> At Tue, 12 Jan 2010 16:58:32 -0500,
> Nickolas wrote:
> >
> > this is a quick fix i wrote up a couple days ago to fix speaker
> > output on the Realtek ALC272 codec present in toshiba nb205
> > netbooks. presently, speaker output doesn't work at all on this
> > model, regardless of settings in the mixer. this is because the
> > current driver thinks the speaker is at nid 0x0c instead of the
> > correct 0x17. i'm not too familiar with this hardware, so i'm not
> > sure that this patch won't have any negative effects for other
> > hardware. it also seems like a messy way of fixing the problem.
> > any comments or suggestions are welcome, as is testing for those who
> > have this board. diffed against the latest git.
>
> Thanks for the patch. The change looks safe to me.
>
> But I'm still wondering whether model=auto doesn't work for this device.
> Could you try it with the latest driver?
>
>
> thanks,
>
> Takashi
>
hmm, i feel stupid. so, it works with model=auto, but why is that not implied when the model parameter isn't specified on the command line?
anyway, thanks for the help :)
Nick
> >
> > Thanks,
> > Nick
> >
> > --
> >
> > Signed-off-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
> >
> > --- alsa-driver/sound/pci/hda/patch_realtek.c 2010-01-12 08:03:28.000000000 -0500
> > +++ alsa-driver-b/sound/pci/hda/patch_realtek.c 2010-01-12 16:27:48.000000000 -0500
> > @@ -192,6 +192,7 @@ enum {
> > ALC663_ASUS_MODE8,
> > ALC272_DELL,
> > ALC272_DELL_ZM1,
> > + ALC272_TOSHIBA_N200,
> > ALC272_SAMSUNG_NC10,
> > ALC662_AUTO,
> > ALC662_MODEL_LAST,
> > @@ -16725,6 +16726,11 @@ static struct hda_verb alc272_dell_init_
> > {}
> > };
> >
> > +static struct hda_verb alc272_toshiba_init_verbs[] = {
> > + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
> > + {}
> > +};
> > +
> > static struct hda_verb alc663_mode7_init_verbs[] = {
> > {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
> > {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
> > @@ -17255,6 +17261,36 @@ static void alc663_g50v_inithook(struct
> > alc_mic_automute(codec);
> > }
> >
> > +static void alc272_toshiba_speaker_automute(struct hda_codec *codec)
> > +{
> > + unsigned int present;
> > + unsigned char bits;
> > +
> > + present = snd_hda_jack_detect(codec, 0x21);
> > + bits = present ? HDA_AMP_MUTE : 0;
> > + snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
> > + HDA_AMP_MUTE, bits);
> > +}
> > +
> > +static void alc272_toshiba_unsol_event(struct hda_codec *codec,
> > + unsigned int res)
> > +{
> > + switch (res >> 26) {
> > + case ALC880_HP_EVENT:
> > + alc272_toshiba_speaker_automute(codec);
> > + break;
> > + case ALC880_MIC_EVENT:
> > + alc_mic_automute(codec);
> > + break;
> > + }
> > +}
> > +
> > +static void alc272_toshiba_init_hook(struct hda_codec *codec)
> > +{
> > + alc272_toshiba_speaker_automute(codec);
> > + alc_mic_automute(codec);
> > +}
> > +
> > static struct snd_kcontrol_new alc662_ecs_mixer[] = {
> > HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
> > ALC262_HIPPO_MASTER_SWITCH,
> > @@ -17391,7 +17427,7 @@ static struct snd_pci_quirk alc662_cfg_t
> > SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
> > SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
> > ALC662_3ST_6ch_DIG),
> > - SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
> > + SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC272_TOSHIBA_N200),
> > SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
> > SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
> > ALC662_3ST_6ch_DIG),
> > @@ -17696,6 +17732,22 @@ static struct alc_config_preset alc662_p
> > .setup = alc663_m51va_setup,
> > .init_hook = alc663_m51va_inithook,
> > },
> > + [ALC272_TOSHIBA_N200] = {
> > + .mixers = { alc663_asus_21jd_clfe_mixer },
> > + .cap_mixer = alc662_auto_capture_mixer,
> > + .init_verbs = { alc662_init_verbs,
> > + alc663_21jd_amic_init_verbs,
> > + alc272_toshiba_init_verbs },
> > + .num_dacs = ARRAY_SIZE(alc662_dac_nids),
> > + .hp_nid = 0x03,
> > + .dac_nids = alc662_dac_nids,
> > + .dig_out_nid = ALC662_DIGOUT_NID,
> > + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
> > + .channel_mode = alc662_3ST_2ch_modes,
> > + .unsol_event = alc272_toshiba_unsol_event,
> > + .setup = alc663_mode4_setup,
> > + .init_hook = alc272_toshiba_init_hook,
> > + },
> > [ALC272_SAMSUNG_NC10] = {
> > .mixers = { alc272_nc10_mixer },
> > .init_verbs = { alc662_init_verbs,
> >
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] - fix speaker output for toshiba nb205 netbooks
2010-01-13 16:06 ` Nickolas
@ 2010-01-13 16:17 ` Takashi Iwai
2010-01-13 19:13 ` Nickolas
0 siblings, 1 reply; 6+ messages in thread
From: Takashi Iwai @ 2010-01-13 16:17 UTC (permalink / raw)
To: Nickolas; +Cc: alsa-devel
At Wed, 13 Jan 2010 11:06:11 -0500,
Nickolas wrote:
>
> On Wed, 13 Jan 2010 09:14:32 +0100
> Takashi Iwai <tiwai@suse.de> wrote:
>
> > At Tue, 12 Jan 2010 16:58:32 -0500,
> > Nickolas wrote:
> > >
> > > this is a quick fix i wrote up a couple days ago to fix speaker
> > > output on the Realtek ALC272 codec present in toshiba nb205
> > > netbooks. presently, speaker output doesn't work at all on this
> > > model, regardless of settings in the mixer. this is because the
> > > current driver thinks the speaker is at nid 0x0c instead of the
> > > correct 0x17. i'm not too familiar with this hardware, so i'm not
> > > sure that this patch won't have any negative effects for other
> > > hardware. it also seems like a messy way of fixing the problem.
> > > any comments or suggestions are welcome, as is testing for those who
> > > have this board. diffed against the latest git.
> >
> > Thanks for the patch. The change looks safe to me.
> >
> > But I'm still wondering whether model=auto doesn't work for this device.
> > Could you try it with the latest driver?
> >
> >
> > thanks,
> >
> > Takashi
> >
>
> hmm, i feel stupid. so, it works with model=auto, but why is that not implied when the model parameter isn't specified on the command line?
OK, that's good to hear. IIRC, the quirk was there because it didn't work
with model=auto, at least, at that time.
I guess it's time to back to auto option again. I'll fix now.
Thanks for quick testing!
Takashi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] - fix speaker output for toshiba nb205 netbooks
2010-01-13 16:17 ` Takashi Iwai
@ 2010-01-13 19:13 ` Nickolas
2010-01-16 4:00 ` Nickolas
0 siblings, 1 reply; 6+ messages in thread
From: Nickolas @ 2010-01-13 19:13 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
On Wed, 13 Jan 2010 17:17:20 +0100
Takashi Iwai <tiwai@suse.de> wrote:
> At Wed, 13 Jan 2010 11:06:11 -0500,
> Nickolas wrote:
> >
> > On Wed, 13 Jan 2010 09:14:32 +0100
> > Takashi Iwai <tiwai@suse.de> wrote:
> >
> > > At Tue, 12 Jan 2010 16:58:32 -0500,
> > > Nickolas wrote:
> > > >
> > > > this is a quick fix i wrote up a couple days ago to fix speaker
> > > > output on the Realtek ALC272 codec present in toshiba nb205
> > > > netbooks. presently, speaker output doesn't work at all on this
> > > > model, regardless of settings in the mixer. this is because the
> > > > current driver thinks the speaker is at nid 0x0c instead of the
> > > > correct 0x17. i'm not too familiar with this hardware, so i'm not
> > > > sure that this patch won't have any negative effects for other
> > > > hardware. it also seems like a messy way of fixing the problem.
> > > > any comments or suggestions are welcome, as is testing for those who
> > > > have this board. diffed against the latest git.
> > >
> > > Thanks for the patch. The change looks safe to me.
> > >
> > > But I'm still wondering whether model=auto doesn't work for this device.
> > > Could you try it with the latest driver?
> > >
> > >
> > > thanks,
> > >
> > > Takashi
> > >
> >
> > hmm, i feel stupid. so, it works with model=auto, but why is that not implied when the model parameter isn't specified on the command line?
>
> OK, that's good to hear. IIRC, the quirk was there because it didn't work
> with model=auto, at least, at that time.
>
> I guess it's time to back to auto option again. I'll fix now.
>
> Thanks for quick testing!
>
>
> Takashi
no problem. i'll test all the ports later today when i have time to make sure that they work properly with model=auto, just to be sure. thanks for the help!
Nick
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] - fix speaker output for toshiba nb205 netbooks
2010-01-13 19:13 ` Nickolas
@ 2010-01-16 4:00 ` Nickolas
0 siblings, 0 replies; 6+ messages in thread
From: Nickolas @ 2010-01-16 4:00 UTC (permalink / raw)
To: Nickolas; +Cc: Takashi Iwai, alsa-devel
On Wed, 13 Jan 2010 14:13:08 -0500
Nickolas <ultrageek.lloyd@gmail.com> wrote:
> On Wed, 13 Jan 2010 17:17:20 +0100
> Takashi Iwai <tiwai@suse.de> wrote:
>
> > At Wed, 13 Jan 2010 11:06:11 -0500,
> > Nickolas wrote:
> > >
> > > On Wed, 13 Jan 2010 09:14:32 +0100
> > > Takashi Iwai <tiwai@suse.de> wrote:
> > >
> > > > At Tue, 12 Jan 2010 16:58:32 -0500,
> > > > Nickolas wrote:
> > > > >
> > > > > this is a quick fix i wrote up a couple days ago to fix speaker
> > > > > output on the Realtek ALC272 codec present in toshiba nb205
> > > > > netbooks. presently, speaker output doesn't work at all on this
> > > > > model, regardless of settings in the mixer. this is because the
> > > > > current driver thinks the speaker is at nid 0x0c instead of the
> > > > > correct 0x17. i'm not too familiar with this hardware, so i'm not
> > > > > sure that this patch won't have any negative effects for other
> > > > > hardware. it also seems like a messy way of fixing the problem.
> > > > > any comments or suggestions are welcome, as is testing for those who
> > > > > have this board. diffed against the latest git.
> > > >
> > > > Thanks for the patch. The change looks safe to me.
> > > >
> > > > But I'm still wondering whether model=auto doesn't work for this device.
> > > > Could you try it with the latest driver?
> > > >
> > > >
> > > > thanks,
> > > >
> > > > Takashi
> > > >
> > >
> > > hmm, i feel stupid. so, it works with model=auto, but why is that not implied when the model parameter isn't specified on the command line?
> >
> > OK, that's good to hear. IIRC, the quirk was there because it didn't work
> > with model=auto, at least, at that time.
> >
> > I guess it's time to back to auto option again. I'll fix now.
> >
> > Thanks for quick testing!
> >
> >
> > Takashi
>
> no problem. i'll test all the ports later today when i have time to make sure that they work properly with model=auto, just to be sure. thanks for the help!
>
> Nick
sorry for the delay. it looks like everything works for the most part. there are a few problems, ie with mic input, but those are hopefully just configuration issues, but it is no worse than it was before with the quirk. hope that helps.
Nick
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-01-16 3:59 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-12 21:58 [PATCH] - fix speaker output for toshiba nb205 netbooks Nickolas
2010-01-13 8:14 ` Takashi Iwai
2010-01-13 16:06 ` Nickolas
2010-01-13 16:17 ` Takashi Iwai
2010-01-13 19:13 ` Nickolas
2010-01-16 4:00 ` Nickolas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.