From: Andrew Morton <akpm@linux-foundation.org>
To: Udo van den Heuvel <udovdh@xs4all.nl>
Cc: linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] 2.6.33 on jetway nc81-lf board
Date: Wed, 03 Mar 2010 05:37:09 +0000 [thread overview]
Message-ID: <20100302213709.951ee97b.akpm@linux-foundation.org> (raw)
In-Reply-To: <4B8C0598.2060000@xs4all.nl>
(cc lm-sensors)
On Mon, 01 Mar 2010 19:21:12 +0100 Udo van den Heuvel <udovdh@xs4all.nl> wrote:
> Hello,
>
> I just compiled 2.6.33 on a Jetway NC81-LF board with AMD 235E CPU.
> While trying to get lm_sensors to work I get in dmesg stuff like:
>
> f71882fg: Found f71862fg chip at 0x220, revision 18
> ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region
> IP__ [0x225-0x226]
> ACPI: If an ACPI driver is available for this device, you should use it
> instead of the native driver
> ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region
> SOR1 [0xb00-0xb0f]
> ACPI: If an ACPI driver is available for this device, you should use it
> instead of the native driver
>
>
> No other sensor-related modules are loaded.
>
> What could be wrong?
>
> # lspci
> 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
> 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
> (int gfx)
> 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
> (PCIE port 0)
> 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
> (PCIE port 1)
> 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA
> Controller [AHCI mode]
> 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller
> 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
> 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
> 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller
> 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
> 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
> 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
> 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
> 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2
> Controller
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] HyperTransport Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] Miscellaneous Control
> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] Link Control
> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200
> Graphics
> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
>
> # dmesg|grep -i acpi
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> ACPI: RSDP 00000000000f83d0 00024 (v02 RS780 )
> ACPI: XSDT 00000000bffe3080 0004C (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: FACP 00000000bffea480 000F4 (v03 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: DSDT 00000000bffe3200 0724B (v01 RS780 AWRDACPI 00001000 MSFT
> 03000000)
> ACPI: FACS 00000000bffe0000 00040
> ACPI: SSDT 00000000bffea640 0095E (v01 PTLTD POWERNOW 00000001 LTP
> 00000001)
> ACPI: HPET 00000000bffeafc0 00038 (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000098)
> ACPI: MCFG 00000000bffeb000 0003C (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: APIC 00000000bffea580 00084 (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: Local APIC address 0xfee00000
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> ACPI: Core revision 20091214
> ACPI: bus type pci registered
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with
> "pci=use_crs" to use them
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> PCI: Using ACPI for IRQ routing
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index
> 0 - found [NULL Object Descriptor], expected Reference
> (20091214/nspredef-1040)
> ACPI: Expecting a [Reference] package element, found type 0
> ACPI: Invalid passive threshold
> ACPI: Thermal Zone [THRM] (40 C)
> ACPI: Power Button [PWRB]
> ACPI: Power Button [PWRF]
> ACPI: Fan [FAN] (on)
> ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region
> IP__ [0x225-0x226]
> ACPI: If an ACPI driver is available for this device, you should use it
> instead of the native driver
> (etc)
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Morton <akpm@linux-foundation.org>
To: Udo van den Heuvel <udovdh@xs4all.nl>
Cc: linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: 2.6.33 on jetway nc81-lf board
Date: Tue, 2 Mar 2010 21:37:09 -0800 [thread overview]
Message-ID: <20100302213709.951ee97b.akpm@linux-foundation.org> (raw)
In-Reply-To: <4B8C0598.2060000@xs4all.nl>
(cc lm-sensors)
On Mon, 01 Mar 2010 19:21:12 +0100 Udo van den Heuvel <udovdh@xs4all.nl> wrote:
> Hello,
>
> I just compiled 2.6.33 on a Jetway NC81-LF board with AMD 235E CPU.
> While trying to get lm_sensors to work I get in dmesg stuff like:
>
> f71882fg: Found f71862fg chip at 0x220, revision 18
> ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region
> IP__ [0x225-0x226]
> ACPI: If an ACPI driver is available for this device, you should use it
> instead of the native driver
> ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region
> SOR1 [0xb00-0xb0f]
> ACPI: If an ACPI driver is available for this device, you should use it
> instead of the native driver
>
>
> No other sensor-related modules are loaded.
>
> What could be wrong?
>
> # lspci
> 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
> 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
> (int gfx)
> 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
> (PCIE port 0)
> 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
> (PCIE port 1)
> 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA
> Controller [AHCI mode]
> 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller
> 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
> 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
> 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller
> 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
> 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
> 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
> 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
> 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2
> Controller
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] HyperTransport Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] Miscellaneous Control
> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
> Athlon64, Sempron] Link Control
> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200
> Graphics
> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
>
> # dmesg|grep -i acpi
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> ACPI: RSDP 00000000000f83d0 00024 (v02 RS780 )
> ACPI: XSDT 00000000bffe3080 0004C (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: FACP 00000000bffea480 000F4 (v03 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: DSDT 00000000bffe3200 0724B (v01 RS780 AWRDACPI 00001000 MSFT
> 03000000)
> ACPI: FACS 00000000bffe0000 00040
> ACPI: SSDT 00000000bffea640 0095E (v01 PTLTD POWERNOW 00000001 LTP
> 00000001)
> ACPI: HPET 00000000bffeafc0 00038 (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000098)
> ACPI: MCFG 00000000bffeb000 0003C (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: APIC 00000000bffea580 00084 (v01 RS780 AWRDACPI 42302E31 AWRD
> 00000000)
> ACPI: Local APIC address 0xfee00000
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> ACPI: Core revision 20091214
> ACPI: bus type pci registered
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with
> "pci=use_crs" to use them
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> PCI: Using ACPI for IRQ routing
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index
> 0 - found [NULL Object Descriptor], expected Reference
> (20091214/nspredef-1040)
> ACPI: Expecting a [Reference] package element, found type 0
> ACPI: Invalid passive threshold
> ACPI: Thermal Zone [THRM] (40 C)
> ACPI: Power Button [PWRB]
> ACPI: Power Button [PWRF]
> ACPI: Fan [FAN] (on)
> ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region
> IP__ [0x225-0x226]
> ACPI: If an ACPI driver is available for this device, you should use it
> instead of the native driver
> (etc)
>
next prev parent reply other threads:[~2010-03-03 5:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-01 18:21 2.6.33 on jetway nc81-lf board Udo van den Heuvel
2010-03-03 5:37 ` Andrew Morton [this message]
2010-03-03 5:37 ` Andrew Morton
2010-03-04 9:17 ` [lm-sensors] " Andre Prendel
2010-03-04 9:17 ` Andre Prendel
2010-03-04 14:34 ` Udo van den Heuvel
2010-03-04 14:34 ` Udo van den Heuvel
2010-03-05 2:09 ` Robert Hancock
2010-03-05 2:09 ` Robert Hancock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100302213709.951ee97b.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=udovdh@xs4all.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.