From: "Ira W. Snyder" <iws@ovro.caltech.edu>
To: Wolfgang Grandegger <wg@grandegger.com>
Cc: socketcan-core@lists.berlios.de, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, sameo@linux.intel.com
Subject: Re: [PATCH 2/3] can: add support for Janz VMOD-ICAN3 Intelligent CAN module
Date: Mon, 22 Mar 2010 13:51:01 -0700 [thread overview]
Message-ID: <20100322205101.GC19327@ovro.caltech.edu> (raw)
In-Reply-To: <4BA7D2E9.6010007@grandegger.com>
On Mon, Mar 22, 2010 at 09:28:25PM +0100, Wolfgang Grandegger wrote:
[ big snip ]
>
> You could even add the tx/rx values for each error message (for both,
> state changes and bus-errors).
>
Ok, with that change, I get the following:
berr-reporting on:
can0 20000088 [8] 00 00 80 19 00 00 08 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 10 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 18 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 20 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 28 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 30 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 38 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 40 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 48 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 50 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 58 00 ERRORFRAME
can0 20000004 [8] 00 08 00 00 00 00 60 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 60 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 68 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 70 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 78 00 ERRORFRAME
can0 20000004 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 80 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 80 00 ERRORFRAME
And now lots more of this last frame repeated, until the controller
decides to stop. Seems fine. It has always done this.
berr-reporting off:
can1 20000004 [8] 00 08 00 00 00 00 60 00 ERRORFRAME
can1 20000004 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
Same as before. Excellent.
> > I haven't heard back from Samuel Ortiz yet about the changes for the mfd
> > layer. Would you like me to send out my latest CAN driver changes, or
> > should I just wait until I hear back?
>
> As you need patch 1/3 anyway, just wait some more time. From my point of
> view the next version of the patch will be OK.
>
Ok, I'll wait a few more days before pinging him again. He's CC'd on all
of these emails anyway. :)
Thanks for all the help,
Ira
WARNING: multiple messages have this Message-ID (diff)
From: "Ira W. Snyder" <iws-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
To: Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
Cc: socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org
Subject: Re: [PATCH 2/3] can: add support for Janz VMOD-ICAN3 Intelligent CAN module
Date: Mon, 22 Mar 2010 13:51:01 -0700 [thread overview]
Message-ID: <20100322205101.GC19327@ovro.caltech.edu> (raw)
In-Reply-To: <4BA7D2E9.6010007-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
On Mon, Mar 22, 2010 at 09:28:25PM +0100, Wolfgang Grandegger wrote:
[ big snip ]
>
> You could even add the tx/rx values for each error message (for both,
> state changes and bus-errors).
>
Ok, with that change, I get the following:
berr-reporting on:
can0 20000088 [8] 00 00 80 19 00 00 08 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 10 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 18 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 20 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 28 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 30 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 38 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 40 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 48 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 50 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 58 00 ERRORFRAME
can0 20000004 [8] 00 08 00 00 00 00 60 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 60 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 68 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 70 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 78 00 ERRORFRAME
can0 20000004 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 80 00 ERRORFRAME
can0 20000088 [8] 00 00 80 19 00 00 80 00 ERRORFRAME
And now lots more of this last frame repeated, until the controller
decides to stop. Seems fine. It has always done this.
berr-reporting off:
can1 20000004 [8] 00 08 00 00 00 00 60 00 ERRORFRAME
can1 20000004 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
Same as before. Excellent.
> > I haven't heard back from Samuel Ortiz yet about the changes for the mfd
> > layer. Would you like me to send out my latest CAN driver changes, or
> > should I just wait until I hear back?
>
> As you need patch 1/3 anyway, just wait some more time. From my point of
> view the next version of the patch will be OK.
>
Ok, I'll wait a few more days before pinging him again. He's CC'd on all
of these emails anyway. :)
Thanks for all the help,
Ira
next prev parent reply other threads:[~2010-03-22 20:51 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-18 16:38 [PATCH 2/3] can: add support for Janz VMOD-ICAN3 Intelligent CAN module Ira W. Snyder
2010-03-19 9:01 ` Wolfgang Grandegger
2010-03-19 9:01 ` Wolfgang Grandegger
2010-03-19 15:19 ` Ira W. Snyder
2010-03-19 15:19 ` Ira W. Snyder
2010-03-19 15:45 ` Wolfgang Grandegger
2010-03-19 20:03 ` Ira W. Snyder
2010-03-19 20:13 ` Wolfgang Grandegger
2010-03-19 20:13 ` Wolfgang Grandegger
2010-03-19 21:52 ` Ira W. Snyder
2010-03-20 7:55 ` Wolfgang Grandegger
2010-03-20 7:55 ` Wolfgang Grandegger
2010-03-22 15:53 ` Ira W. Snyder
2010-03-22 15:53 ` Ira W. Snyder
2010-03-22 19:17 ` Wolfgang Grandegger
2010-03-22 19:17 ` Wolfgang Grandegger
2010-03-22 19:23 ` Wolfgang Grandegger
2010-03-22 19:23 ` Wolfgang Grandegger
2010-03-22 20:12 ` Ira W. Snyder
2010-03-22 20:12 ` Ira W. Snyder
2010-03-22 20:10 ` Ira W. Snyder
2010-03-22 20:10 ` Ira W. Snyder
2010-03-22 20:28 ` Wolfgang Grandegger
2010-03-22 20:28 ` Wolfgang Grandegger
2010-03-22 20:51 ` Ira W. Snyder [this message]
2010-03-22 20:51 ` Ira W. Snyder
2010-03-22 21:24 ` Wolfgang Grandegger
2010-03-22 21:24 ` Wolfgang Grandegger
-- strict thread matches above, loose matches on Subject: below --
2010-03-29 16:58 Ira W. Snyder
2010-03-29 16:58 ` Ira W. Snyder
2010-03-30 8:14 ` Wolfgang Grandegger
2010-03-30 8:14 ` Wolfgang Grandegger
2010-03-31 6:46 ` David Miller
2010-04-01 20:03 ` Andrew Morton
2010-04-02 0:43 ` Ira W. Snyder
2010-04-02 0:43 ` Ira W. Snyder
2010-03-02 21:22 [PATCH 0/3 RFCv4] add support for Janz MODULbus devices Ira W. Snyder
2010-03-02 21:22 ` [PATCH 2/3] can: add support for Janz VMOD-ICAN3 Intelligent CAN module Ira W. Snyder
2010-03-17 19:33 ` Ira W. Snyder
2010-03-18 8:36 ` Wolfgang Grandegger
2010-03-18 15:19 ` Ira W. Snyder
2010-03-18 16:06 ` Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100322205101.GC19327@ovro.caltech.edu \
--to=iws@ovro.caltech.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=socketcan-core@lists.berlios.de \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.