* Random scheduler/unaligned accesses crashes with perf lock events @ 2010-04-04 12:18 ` Frederic Weisbecker 0 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-04 12:18 UTC (permalink / raw) To: David Miller, SparcLinux, LKML, Ingo Molnar, Arnaldo Carvalho de Melo, Peter Zijlstra, Paul Mackerras Hi, On tip:master, while turning on lock events with perf through perf lock record I get random kernel crashes, sometimes about weird unaligned accesses, sometimes about scheduler that complains. I hope someone has an idea about this. In three different attempts (got to force reboot each time), I got: First (task_tgid_nr_ns() is called from perf_event_pid()): [ 565.464201] Kernel unaligned access at TPC[486b74] task_tgid_nr_ns+0x8/0x54 [ 565.475801] sun4v_data_access_exception: ADDR[000060f8b13a2004] CTX[0000] TYPE[0009], going. [ 565.488610] \|/ ____ \|/ 1>[ 565.492705] Unable to handle kernel NULL pointer dereference [ 565.492719] Unable to handle kernel NULL pointer dereference [ 565.492733] Unable to handle kernel NULL pointer dereference [ 565.492747] Unable to handle kernel NULL pointer dereference [ 565.492761] Unable to handle kernel NULL pointer dereference [ 565.492776] Unable to handle kernel NULL pointer dereference [ 565.492790] Unable to handle kernel NULL pointer dereference [ 565.492804] Unable to handle kernel NULL pointer dereference [ 565.492818] Unable to handle kernel NULL pointer dereference [ 565.492832] Unable to handle kernel NULL pointer dereference [ 565.492847] Unable to handle kernel NULL pointer dereference Second: [ 250.508047] Kernel unaligned access at TPC[4d1a0c] perf_swevent_ctx_event+0x16c/0x1b0 (this one happened in asm/processor_64.h: prefetch(), probably while walking to the context's event list) Third: [ 60.147895] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 130.637924] sun4v_data_access_exception: ADDR[ffffa010933a6060] CTX[0000] TYPE[0009], going. [ 130.639329] kernel BUG at kernel/sched.c:1166! [ 130.639364] \|/ ____ \|/ [ 130.639370] "@'/ .. \`@" [ 130.639377] /_| \__/ |_\ [ 130.639382] \__U_/ [ 130.639394] swapper(0): Kernel bad sw trap 5 [#1] [ 130.639430] TSTATE: 0000000080e01605 TPC: 000000000045a02c TNPC: 000000000045a030 Y: 00000000 Tainted: G W [ 130.639462] TPC: <resched_task+0x44/0xa8> [ 130.639475] g0: fffff803f685d980 g1: 0000000000000000 g2: 0000000000000027 g3: 0000000000007d0d [ 130.639493] g4: fffff803f685d980 g5: fffff800160a0000 g6: fffff803f6864000 g7: 0000000000b54c00 [ 130.639511] o0: 0000000000828580 o1: 000000000000048e o2: 0000000000000000 o3: 0000000000000000 [ 130.639528] o4: 0000000000000002 o5: 0000000000000001 sp: fffff803ff932ff1 ret_pc: 000000000045a024 [ 130.639548] RPC: <resched_task+0x3c/0xa8> [ 130.639561] l0: 0000000000000000 l1: 000000000000000e l2: ffffffffffffffff l3: 0000000000000104 [ 130.639580] l4: fffff803f685d980 l5: 0006000000000000 l6: 000000000000000e l7: 00000000008a4180 [ 130.639597] i0: fffff803f62c6960 i1: fffff803f7fa18e0 i2: 0000000000000001 i3: 0000000000000000 [ 130.639616] i4: 0000000000b28340 i5: 0000000000b25cc0 i6: fffff803ff9330b1 i7: 0000000000461bc8 [ 130.639644] I7: <check_preempt_wakeup+0x148/0x1f8> [ 130.639655] Instruction DUMP: 9210248e 7fff3f4d 90122180 <91d02005> c25a6008 82086008 0ac84014 92026008 4005c092 [ 130.639703] Kernel panic - not syncing: Aiee, killing interrupt handler! [ 130.639715] Call Trace: [ 130.639742] [000000000073795c] panic+0x58/0x124 [ 130.639763] [000000000046fb80] do_exit+0x64/0x770 [ 130.639782] [0000000000427d4c] die_if_kernel+0x264/0x290 [ 130.639801] [000000000042a138] bad_trap+0x78/0xe8 [ 130.639824] [00000000004220b0] tl0_resv104+0x30/0xa0 [ 130.639841] [000000000045a02c] resched_task+0x44/0xa8 [ 130.639861] [0000000000461bc8] check_preempt_wakeup+0x148/0x1f8 [ 130.639883] [0000000000466554] try_to_wake_up+0x484/0x570 [ 130.639902] [000000000046668c] wake_up_process+0xc/0x20 [ 130.639920] [00000000004678b4] load_balance+0xfb4/0x10f0 [ 130.639940] [0000000000467b60] rebalance_domains+0x170/0x204 [ 130.639960] [0000000000467c30] run_rebalance_domains+0x3c/0x100 [ 130.639985] [00000000004734a4] __do_softirq+0x1b8/0x378 [ 130.640004] [000000000042a354] do_softirq+0x8c/0xcc [ 130.640021] [0000000000472ec0] irq_exit+0x68/0xd0 [ 130.640044] [000000000042f0f8] timer_interrupt+0xb8/0xec ^ permalink raw reply [flat|nested] 48+ messages in thread
* Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-04 12:18 ` Frederic Weisbecker 0 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-04 12:18 UTC (permalink / raw) To: David Miller, SparcLinux, LKML, Ingo Molnar, Arnaldo Carvalho de Melo, Peter Zijlstra, Paul Mackerras Hi, On tip:master, while turning on lock events with perf through perf lock record I get random kernel crashes, sometimes about weird unaligned accesses, sometimes about scheduler that complains. I hope someone has an idea about this. In three different attempts (got to force reboot each time), I got: First (task_tgid_nr_ns() is called from perf_event_pid()): [ 565.464201] Kernel unaligned access at TPC[486b74] task_tgid_nr_ns+0x8/0x54 [ 565.475801] sun4v_data_access_exception: ADDR[000060f8b13a2004] CTX[0000] TYPE[0009], going. [ 565.488610] \|/ ____ \|/ 1>[ 565.492705] Unable to handle kernel NULL pointer dereference [ 565.492719] Unable to handle kernel NULL pointer dereference [ 565.492733] Unable to handle kernel NULL pointer dereference [ 565.492747] Unable to handle kernel NULL pointer dereference [ 565.492761] Unable to handle kernel NULL pointer dereference [ 565.492776] Unable to handle kernel NULL pointer dereference [ 565.492790] Unable to handle kernel NULL pointer dereference [ 565.492804] Unable to handle kernel NULL pointer dereference [ 565.492818] Unable to handle kernel NULL pointer dereference [ 565.492832] Unable to handle kernel NULL pointer dereference [ 565.492847] Unable to handle kernel NULL pointer dereference Second: [ 250.508047] Kernel unaligned access at TPC[4d1a0c] perf_swevent_ctx_event+0x16c/0x1b0 (this one happened in asm/processor_64.h: prefetch(), probably while walking to the context's event list) Third: [ 60.147895] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 130.637924] sun4v_data_access_exception: ADDR[ffffa010933a6060] CTX[0000] TYPE[0009], going. [ 130.639329] kernel BUG at kernel/sched.c:1166! [ 130.639364] \|/ ____ \|/ [ 130.639370] "@'/ .. \`@" [ 130.639377] /_| \__/ |_\ [ 130.639382] \__U_/ [ 130.639394] swapper(0): Kernel bad sw trap 5 [#1] [ 130.639430] TSTATE: 0000000080e01605 TPC: 000000000045a02c TNPC: 000000000045a030 Y: 00000000 Tainted: G W [ 130.639462] TPC: <resched_task+0x44/0xa8> [ 130.639475] g0: fffff803f685d980 g1: 0000000000000000 g2: 0000000000000027 g3: 0000000000007d0d [ 130.639493] g4: fffff803f685d980 g5: fffff800160a0000 g6: fffff803f6864000 g7: 0000000000b54c00 [ 130.639511] o0: 0000000000828580 o1: 000000000000048e o2: 0000000000000000 o3: 0000000000000000 [ 130.639528] o4: 0000000000000002 o5: 0000000000000001 sp: fffff803ff932ff1 ret_pc: 000000000045a024 [ 130.639548] RPC: <resched_task+0x3c/0xa8> [ 130.639561] l0: 0000000000000000 l1: 000000000000000e l2: ffffffffffffffff l3: 0000000000000104 [ 130.639580] l4: fffff803f685d980 l5: 0006000000000000 l6: 000000000000000e l7: 00000000008a4180 [ 130.639597] i0: fffff803f62c6960 i1: fffff803f7fa18e0 i2: 0000000000000001 i3: 0000000000000000 [ 130.639616] i4: 0000000000b28340 i5: 0000000000b25cc0 i6: fffff803ff9330b1 i7: 0000000000461bc8 [ 130.639644] I7: <check_preempt_wakeup+0x148/0x1f8> [ 130.639655] Instruction DUMP: 9210248e 7fff3f4d 90122180 <91d02005> c25a6008 82086008 0ac84014 92026008 4005c092 [ 130.639703] Kernel panic - not syncing: Aiee, killing interrupt handler! [ 130.639715] Call Trace: [ 130.639742] [000000000073795c] panic+0x58/0x124 [ 130.639763] [000000000046fb80] do_exit+0x64/0x770 [ 130.639782] [0000000000427d4c] die_if_kernel+0x264/0x290 [ 130.639801] [000000000042a138] bad_trap+0x78/0xe8 [ 130.639824] [00000000004220b0] tl0_resv104+0x30/0xa0 [ 130.639841] [000000000045a02c] resched_task+0x44/0xa8 [ 130.639861] [0000000000461bc8] check_preempt_wakeup+0x148/0x1f8 [ 130.639883] [0000000000466554] try_to_wake_up+0x484/0x570 [ 130.639902] [000000000046668c] wake_up_process+0xc/0x20 [ 130.639920] [00000000004678b4] load_balance+0xfb4/0x10f0 [ 130.639940] [0000000000467b60] rebalance_domains+0x170/0x204 [ 130.639960] [0000000000467c30] run_rebalance_domains+0x3c/0x100 [ 130.639985] [00000000004734a4] __do_softirq+0x1b8/0x378 [ 130.640004] [000000000042a354] do_softirq+0x8c/0xcc [ 130.640021] [0000000000472ec0] irq_exit+0x68/0xd0 [ 130.640044] [000000000042f0f8] timer_interrupt+0xb8/0xec ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-04 12:18 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-04 12:21 ` Frederic Weisbecker -1 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-04 12:21 UTC (permalink / raw) To: David Miller, SparcLinux, LKML, Ingo Molnar, Arnaldo Carvalho de Melo, Peter Zijlstra, Paul Mackerras [-- Attachment #1: Type: text/plain, Size: 4480 bytes --] On Sun, Apr 04, 2010 at 02:18:54PM +0200, Frederic Weisbecker wrote: > Hi, > > On tip:master, while turning on lock events with perf through > > perf lock record > > I get random kernel crashes, sometimes about weird unaligned > accesses, sometimes about scheduler that complains. > > I hope someone has an idea about this. > > In three different attempts (got to force reboot each time), I got: > > First (task_tgid_nr_ns() is called from perf_event_pid()): > > [ 565.464201] Kernel unaligned access at TPC[486b74] task_tgid_nr_ns+0x8/0x54 > [ 565.475801] sun4v_data_access_exception: ADDR[000060f8b13a2004] CTX[0000] TYPE[0009], going. > [ 565.488610] \|/ ____ \|/ > 1>[ 565.492705] Unable to handle kernel NULL pointer dereference > [ 565.492719] Unable to handle kernel NULL pointer dereference > [ 565.492733] Unable to handle kernel NULL pointer dereference > [ 565.492747] Unable to handle kernel NULL pointer dereference > [ 565.492761] Unable to handle kernel NULL pointer dereference > [ 565.492776] Unable to handle kernel NULL pointer dereference > [ 565.492790] Unable to handle kernel NULL pointer dereference > [ 565.492804] Unable to handle kernel NULL pointer dereference > [ 565.492818] Unable to handle kernel NULL pointer dereference > [ 565.492832] Unable to handle kernel NULL pointer dereference > [ 565.492847] Unable to handle kernel NULL pointer dereference > > Second: > > [ 250.508047] Kernel unaligned access at TPC[4d1a0c] perf_swevent_ctx_event+0x16c/0x1b0 > > (this one happened in asm/processor_64.h: prefetch(), probably while > walking to the context's event list) > > Third: > > [ 60.147895] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX > [ 130.637924] sun4v_data_access_exception: ADDR[ffffa010933a6060] CTX[0000] TYPE[0009], going. > [ 130.639329] kernel BUG at kernel/sched.c:1166! > [ 130.639364] \|/ ____ \|/ > [ 130.639370] "@'/ .. \`@" > [ 130.639377] /_| \__/ |_\ > [ 130.639382] \__U_/ > [ 130.639394] swapper(0): Kernel bad sw trap 5 [#1] > [ 130.639430] TSTATE: 0000000080e01605 TPC: 000000000045a02c TNPC: 000000000045a030 Y: 00000000 Tainted: G > W > [ 130.639462] TPC: <resched_task+0x44/0xa8> > [ 130.639475] g0: fffff803f685d980 g1: 0000000000000000 g2: 0000000000000027 g3: 0000000000007d0d > [ 130.639493] g4: fffff803f685d980 g5: fffff800160a0000 g6: fffff803f6864000 g7: 0000000000b54c00 > [ 130.639511] o0: 0000000000828580 o1: 000000000000048e o2: 0000000000000000 o3: 0000000000000000 > [ 130.639528] o4: 0000000000000002 o5: 0000000000000001 sp: fffff803ff932ff1 ret_pc: 000000000045a024 > [ 130.639548] RPC: <resched_task+0x3c/0xa8> > [ 130.639561] l0: 0000000000000000 l1: 000000000000000e l2: ffffffffffffffff l3: 0000000000000104 > [ 130.639580] l4: fffff803f685d980 l5: 0006000000000000 l6: 000000000000000e l7: 00000000008a4180 > [ 130.639597] i0: fffff803f62c6960 i1: fffff803f7fa18e0 i2: 0000000000000001 i3: 0000000000000000 > [ 130.639616] i4: 0000000000b28340 i5: 0000000000b25cc0 i6: fffff803ff9330b1 i7: 0000000000461bc8 > [ 130.639644] I7: <check_preempt_wakeup+0x148/0x1f8> > [ 130.639655] Instruction DUMP: 9210248e 7fff3f4d 90122180 <91d02005> c25a6008 82086008 0ac84014 92026008 > 4005c092 > [ 130.639703] Kernel panic - not syncing: Aiee, killing interrupt handler! > [ 130.639715] Call Trace: > [ 130.639742] [000000000073795c] panic+0x58/0x124 > [ 130.639763] [000000000046fb80] do_exit+0x64/0x770 > [ 130.639782] [0000000000427d4c] die_if_kernel+0x264/0x290 > [ 130.639801] [000000000042a138] bad_trap+0x78/0xe8 > [ 130.639824] [00000000004220b0] tl0_resv104+0x30/0xa0 > [ 130.639841] [000000000045a02c] resched_task+0x44/0xa8 > [ 130.639861] [0000000000461bc8] check_preempt_wakeup+0x148/0x1f8 > [ 130.639883] [0000000000466554] try_to_wake_up+0x484/0x570 > [ 130.639902] [000000000046668c] wake_up_process+0xc/0x20 > [ 130.639920] [00000000004678b4] load_balance+0xfb4/0x10f0 > [ 130.639940] [0000000000467b60] rebalance_domains+0x170/0x204 > [ 130.639960] [0000000000467c30] run_rebalance_domains+0x3c/0x100 > [ 130.639985] [00000000004734a4] __do_softirq+0x1b8/0x378 > [ 130.640004] [000000000042a354] do_softirq+0x8c/0xcc > [ 130.640021] [0000000000472ec0] irq_exit+0x68/0xd0 > [ 130.640044] [000000000042f0f8] timer_interrupt+0xb8/0xec > Forgot the config, it's in attachment. Thanks. [-- Attachment #2: sparc_config --] [-- Type: text/plain, Size: 37582 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34-rc2 # Thu Apr 1 09:48:57 2010 # CONFIG_64BIT=y CONFIG_SPARC=y # CONFIG_SPARC32 is not set CONFIG_SPARC64=y CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig" CONFIG_BITS=64 CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_IOMMU_HELPER=y CONFIG_QUICKLIST=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_AUDIT_ARCH=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set # CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_PERF_COUNTERS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_SYSCALL_WRAPPERS=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # Processor type and features # CONFIG_SMP=y CONFIG_NR_CPUS=64 # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_SPARC64_SMP=y CONFIG_EARLYFB=y CONFIG_SPARC64_PAGE_SIZE_8KB=y # CONFIG_SPARC64_PAGE_SIZE_64KB is not set # CONFIG_SECCOMP is not set CONFIG_HOTPLUG_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_CPU_FREQ is not set CONFIG_US3_MC=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set # CONFIG_HUGETLB_PAGE_SIZE_64K is not set CONFIG_NUMA=y CONFIG_NODES_SHIFT=4 CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=8192 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y # CONFIG_CMDLINE_BOOL is not set # # Bus options (PCI etc.) # CONFIG_SBUS=y CONFIG_SBUSCHAR=y CONFIG_SUN_LDOMS=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC64_PCI=y # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_SUNVDC=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGICPTI is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_SUNESP is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_FUSION=y # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set CONFIG_KEYBOARD_LKKBD=m # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=y # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_SPARCSPKR=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # CONFIG_SERIAL_SUNCORE=y # CONFIG_SERIAL_SUNZILOG is not set CONFIG_SERIAL_SUNSU=y CONFIG_SERIAL_SUNSU_CONSOLE=y CONFIG_SERIAL_SUNSAB=y CONFIG_SERIAL_SUNSAB_CONSOLE=y CONFIG_SERIAL_SUNHV=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_N2RNG=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set # CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_UVESA is not set # CONFIG_FB_SBUS is not set # CONFIG_FB_XVR500 is not set # CONFIG_FB_XVR2500 is not set # CONFIG_FB_XVR1000 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_BACKLIGHT is not set # CONFIG_FB_RADEON_DEBUG is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y # CONFIG_FB_ATY_BACKLIGHT is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set CONFIG_FONT_SUN8x16=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SUN_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m # CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y # # Special HID drivers # # CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=m CONFIG_HID_KYE=m CONFIG_HID_GYRATION=m CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=m # CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m CONFIG_HID_PANTHERLORD=m # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=m # CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m # CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=m CONFIG_HID_GREENASIA=m # CONFIG_GREENASIA_FF is not set CONFIG_HID_SMARTJOYPLUS=m # CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=m CONFIG_HID_THRUSTMASTER=m # CONFIG_THRUSTMASTER_FF is not set CONFIG_HID_ZEROPLUS=m # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=y # CONFIG_RTC_DRV_MSM6242 is not set CONFIG_RTC_DRV_BQ4802=y # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_SUN4V=y CONFIG_RTC_DRV_STARFIRE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # TI VLYNQ # # CONFIG_STAGING is not set # # Misc Linux/SPARC drivers # CONFIG_SUN_OPENPROMIO=y # CONFIG_OBP_FLASH is not set # CONFIG_TADPOLE_TS102_UCTRL is not set # CONFIG_BBC_I2C is not set # CONFIG_ENVCTRL is not set # CONFIG_DISPLAY7SEG is not set # # File systems # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m CONFIG_UFS_FS_WRITE=y # CONFIG_UFS_DEBUG is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set CONFIG_NLS_CODEPAGE_865=m # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y # CONFIG_DEBUG_LOCKDEP is not set CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_DETECTOR=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set CONFIG_FTRACE_SYSCALLS=y # CONFIG_BOOT_TRACER is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m # CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-04 12:21 ` Frederic Weisbecker 0 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-04 12:21 UTC (permalink / raw) To: David Miller, SparcLinux, LKML, Ingo Molnar, Arnaldo Carvalho de Melo, Peter Zijlstra, Paul Mackerras [-- Attachment #1: Type: text/plain, Size: 4480 bytes --] On Sun, Apr 04, 2010 at 02:18:54PM +0200, Frederic Weisbecker wrote: > Hi, > > On tip:master, while turning on lock events with perf through > > perf lock record > > I get random kernel crashes, sometimes about weird unaligned > accesses, sometimes about scheduler that complains. > > I hope someone has an idea about this. > > In three different attempts (got to force reboot each time), I got: > > First (task_tgid_nr_ns() is called from perf_event_pid()): > > [ 565.464201] Kernel unaligned access at TPC[486b74] task_tgid_nr_ns+0x8/0x54 > [ 565.475801] sun4v_data_access_exception: ADDR[000060f8b13a2004] CTX[0000] TYPE[0009], going. > [ 565.488610] \|/ ____ \|/ > 1>[ 565.492705] Unable to handle kernel NULL pointer dereference > [ 565.492719] Unable to handle kernel NULL pointer dereference > [ 565.492733] Unable to handle kernel NULL pointer dereference > [ 565.492747] Unable to handle kernel NULL pointer dereference > [ 565.492761] Unable to handle kernel NULL pointer dereference > [ 565.492776] Unable to handle kernel NULL pointer dereference > [ 565.492790] Unable to handle kernel NULL pointer dereference > [ 565.492804] Unable to handle kernel NULL pointer dereference > [ 565.492818] Unable to handle kernel NULL pointer dereference > [ 565.492832] Unable to handle kernel NULL pointer dereference > [ 565.492847] Unable to handle kernel NULL pointer dereference > > Second: > > [ 250.508047] Kernel unaligned access at TPC[4d1a0c] perf_swevent_ctx_event+0x16c/0x1b0 > > (this one happened in asm/processor_64.h: prefetch(), probably while > walking to the context's event list) > > Third: > > [ 60.147895] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX > [ 130.637924] sun4v_data_access_exception: ADDR[ffffa010933a6060] CTX[0000] TYPE[0009], going. > [ 130.639329] kernel BUG at kernel/sched.c:1166! > [ 130.639364] \|/ ____ \|/ > [ 130.639370] "@'/ .. \`@" > [ 130.639377] /_| \__/ |_\ > [ 130.639382] \__U_/ > [ 130.639394] swapper(0): Kernel bad sw trap 5 [#1] > [ 130.639430] TSTATE: 0000000080e01605 TPC: 000000000045a02c TNPC: 000000000045a030 Y: 00000000 Tainted: G > W > [ 130.639462] TPC: <resched_task+0x44/0xa8> > [ 130.639475] g0: fffff803f685d980 g1: 0000000000000000 g2: 0000000000000027 g3: 0000000000007d0d > [ 130.639493] g4: fffff803f685d980 g5: fffff800160a0000 g6: fffff803f6864000 g7: 0000000000b54c00 > [ 130.639511] o0: 0000000000828580 o1: 000000000000048e o2: 0000000000000000 o3: 0000000000000000 > [ 130.639528] o4: 0000000000000002 o5: 0000000000000001 sp: fffff803ff932ff1 ret_pc: 000000000045a024 > [ 130.639548] RPC: <resched_task+0x3c/0xa8> > [ 130.639561] l0: 0000000000000000 l1: 000000000000000e l2: ffffffffffffffff l3: 0000000000000104 > [ 130.639580] l4: fffff803f685d980 l5: 0006000000000000 l6: 000000000000000e l7: 00000000008a4180 > [ 130.639597] i0: fffff803f62c6960 i1: fffff803f7fa18e0 i2: 0000000000000001 i3: 0000000000000000 > [ 130.639616] i4: 0000000000b28340 i5: 0000000000b25cc0 i6: fffff803ff9330b1 i7: 0000000000461bc8 > [ 130.639644] I7: <check_preempt_wakeup+0x148/0x1f8> > [ 130.639655] Instruction DUMP: 9210248e 7fff3f4d 90122180 <91d02005> c25a6008 82086008 0ac84014 92026008 > 4005c092 > [ 130.639703] Kernel panic - not syncing: Aiee, killing interrupt handler! > [ 130.639715] Call Trace: > [ 130.639742] [000000000073795c] panic+0x58/0x124 > [ 130.639763] [000000000046fb80] do_exit+0x64/0x770 > [ 130.639782] [0000000000427d4c] die_if_kernel+0x264/0x290 > [ 130.639801] [000000000042a138] bad_trap+0x78/0xe8 > [ 130.639824] [00000000004220b0] tl0_resv104+0x30/0xa0 > [ 130.639841] [000000000045a02c] resched_task+0x44/0xa8 > [ 130.639861] [0000000000461bc8] check_preempt_wakeup+0x148/0x1f8 > [ 130.639883] [0000000000466554] try_to_wake_up+0x484/0x570 > [ 130.639902] [000000000046668c] wake_up_process+0xc/0x20 > [ 130.639920] [00000000004678b4] load_balance+0xfb4/0x10f0 > [ 130.639940] [0000000000467b60] rebalance_domains+0x170/0x204 > [ 130.639960] [0000000000467c30] run_rebalance_domains+0x3c/0x100 > [ 130.639985] [00000000004734a4] __do_softirq+0x1b8/0x378 > [ 130.640004] [000000000042a354] do_softirq+0x8c/0xcc > [ 130.640021] [0000000000472ec0] irq_exit+0x68/0xd0 > [ 130.640044] [000000000042f0f8] timer_interrupt+0xb8/0xec > Forgot the config, it's in attachment. Thanks. [-- Attachment #2: sparc_config --] [-- Type: text/plain, Size: 37582 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34-rc2 # Thu Apr 1 09:48:57 2010 # CONFIG_64BIT=y CONFIG_SPARC=y # CONFIG_SPARC32 is not set CONFIG_SPARC64=y CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig" CONFIG_BITS=64 CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_IOMMU_HELPER=y CONFIG_QUICKLIST=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_AUDIT_ARCH=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set # CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_PERF_COUNTERS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_SYSCALL_WRAPPERS=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # Processor type and features # CONFIG_SMP=y CONFIG_NR_CPUS=64 # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_SPARC64_SMP=y CONFIG_EARLYFB=y CONFIG_SPARC64_PAGE_SIZE_8KB=y # CONFIG_SPARC64_PAGE_SIZE_64KB is not set # CONFIG_SECCOMP is not set CONFIG_HOTPLUG_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_CPU_FREQ is not set CONFIG_US3_MC=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set # CONFIG_HUGETLB_PAGE_SIZE_64K is not set CONFIG_NUMA=y CONFIG_NODES_SHIFT=4 CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=8192 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y # CONFIG_CMDLINE_BOOL is not set # # Bus options (PCI etc.) # CONFIG_SBUS=y CONFIG_SBUSCHAR=y CONFIG_SUN_LDOMS=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC64_PCI=y # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_SUNVDC=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGICPTI is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_SUNESP is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_FUSION=y # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set CONFIG_KEYBOARD_LKKBD=m # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=y # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_SPARCSPKR=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # CONFIG_SERIAL_SUNCORE=y # CONFIG_SERIAL_SUNZILOG is not set CONFIG_SERIAL_SUNSU=y CONFIG_SERIAL_SUNSU_CONSOLE=y CONFIG_SERIAL_SUNSAB=y CONFIG_SERIAL_SUNSAB_CONSOLE=y CONFIG_SERIAL_SUNHV=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_N2RNG=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set # CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_UVESA is not set # CONFIG_FB_SBUS is not set # CONFIG_FB_XVR500 is not set # CONFIG_FB_XVR2500 is not set # CONFIG_FB_XVR1000 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_BACKLIGHT is not set # CONFIG_FB_RADEON_DEBUG is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y # CONFIG_FB_ATY_BACKLIGHT is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set CONFIG_FONT_SUN8x16=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SUN_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m # CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y # # Special HID drivers # # CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=m CONFIG_HID_KYE=m CONFIG_HID_GYRATION=m CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=m # CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m CONFIG_HID_PANTHERLORD=m # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=m # CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m # CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=m CONFIG_HID_GREENASIA=m # CONFIG_GREENASIA_FF is not set CONFIG_HID_SMARTJOYPLUS=m # CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=m CONFIG_HID_THRUSTMASTER=m # CONFIG_THRUSTMASTER_FF is not set CONFIG_HID_ZEROPLUS=m # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=y # CONFIG_RTC_DRV_MSM6242 is not set CONFIG_RTC_DRV_BQ4802=y # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_SUN4V=y CONFIG_RTC_DRV_STARFIRE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # TI VLYNQ # # CONFIG_STAGING is not set # # Misc Linux/SPARC drivers # CONFIG_SUN_OPENPROMIO=y # CONFIG_OBP_FLASH is not set # CONFIG_TADPOLE_TS102_UCTRL is not set # CONFIG_BBC_I2C is not set # CONFIG_ENVCTRL is not set # CONFIG_DISPLAY7SEG is not set # # File systems # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m CONFIG_UFS_FS_WRITE=y # CONFIG_UFS_DEBUG is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set CONFIG_NLS_CODEPAGE_865=m # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y # CONFIG_DEBUG_LOCKDEP is not set CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_DETECTOR=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set CONFIG_FTRACE_SYSCALLS=y # CONFIG_BOOT_TRACER is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m # CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-04 12:21 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-05 1:00 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-05 1:00 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Sun, 4 Apr 2010 14:21:19 +0200 > Forgot the config, it's in attachment. I get them too when even trying to use the function tracer in some simple way. They occur in random places and eventually the entire machine wedges and is unusuable. I suspect there is some bug that ends up corrupting memory, so I started trying to debug this last night when I first saw it. I'll let you know if I make any progress. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-05 1:00 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-05 1:00 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Sun, 4 Apr 2010 14:21:19 +0200 > Forgot the config, it's in attachment. I get them too when even trying to use the function tracer in some simple way. They occur in random places and eventually the entire machine wedges and is unusuable. I suspect there is some bug that ends up corrupting memory, so I started trying to debug this last night when I first saw it. I'll let you know if I make any progress. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-05 1:00 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-05 6:57 ` Frederic Weisbecker -1 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-05 6:57 UTC (permalink / raw) To: David Miller; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Sun, Apr 04, 2010 at 06:00:57PM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Sun, 4 Apr 2010 14:21:19 +0200 > > > Forgot the config, it's in attachment. > > I get them too when even trying to use the function tracer in some > simple way. They occur in random places and eventually the entire > machine wedges and is unusuable. Yeah. But it's not totally random. I often see the same scheduler crash. It seems to happen after an unaligned access fixup. > > I suspect there is some bug that ends up corrupting memory, so I > started trying to debug this last night when I first saw it. Ok. I indeed have the same problem with the function tracer when it is running. > I'll let you know if I make any progress. Thanks! ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-05 6:57 ` Frederic Weisbecker 0 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-05 6:57 UTC (permalink / raw) To: David Miller; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Sun, Apr 04, 2010 at 06:00:57PM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Sun, 4 Apr 2010 14:21:19 +0200 > > > Forgot the config, it's in attachment. > > I get them too when even trying to use the function tracer in some > simple way. They occur in random places and eventually the entire > machine wedges and is unusuable. Yeah. But it's not totally random. I often see the same scheduler crash. It seems to happen after an unaligned access fixup. > > I suspect there is some bug that ends up corrupting memory, so I > started trying to debug this last night when I first saw it. Ok. I indeed have the same problem with the function tracer when it is running. > I'll let you know if I make any progress. Thanks! ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-05 6:57 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-05 19:22 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-05 19:22 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 08:57:04 +0200 > It seems to happen after an unaligned access fixup. You shouldn't be getting the unaligned fixup in the first place, especially in the locations where you see them. I suspect that once you see first fixup, all of the registers in the cpu have been corrupted in one way or another. I suspect something fundamental gets corrupted, for example the current register window (%cwp) is corrupted and that screws up all of the registers so every single function starts accessing garbage. My suspicions lie in three places, the ftrace mcount() stubs, stack_trace_flush(), or the new perf_arch_save_caller_regs() since those are the three places offhand that could make us potentially make us return to function in the wrong register window. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-05 19:22 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-05 19:22 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 08:57:04 +0200 > It seems to happen after an unaligned access fixup. You shouldn't be getting the unaligned fixup in the first place, especially in the locations where you see them. I suspect that once you see first fixup, all of the registers in the cpu have been corrupted in one way or another. I suspect something fundamental gets corrupted, for example the current register window (%cwp) is corrupted and that screws up all of the registers so every single function starts accessing garbage. My suspicions lie in three places, the ftrace mcount() stubs, stack_trace_flush(), or the new perf_arch_save_caller_regs() since those are the three places offhand that could make us potentially make us return to function in the wrong register window. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-05 19:22 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-05 19:40 ` Frederic Weisbecker -1 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-05 19:40 UTC (permalink / raw) To: David Miller; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Mon, Apr 05, 2010 at 12:22:33PM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 08:57:04 +0200 > > > It seems to happen after an unaligned access fixup. > > You shouldn't be getting the unaligned fixup in the first place, > especially in the locations where you see them. I suspect that > once you see first fixup, all of the registers in the cpu have > been corrupted in one way or another. > > I suspect something fundamental gets corrupted, for example the > current register window (%cwp) is corrupted and that screws up all of > the registers so every single function starts accessing garbage. > > My suspicions lie in three places, the ftrace mcount() > stubs, stack_trace_flush(), or the new perf_arch_save_caller_regs() > since those are the three places offhand that could make > us potentially make us return to function in the wrong > register window. It happens without CONFIG_FUNCTION_TRACER as well (but it happens when the function tracer runs). And I hadn't your perf_arch_save_caller_regs() when I triggered this. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-05 19:40 ` Frederic Weisbecker 0 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-05 19:40 UTC (permalink / raw) To: David Miller; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Mon, Apr 05, 2010 at 12:22:33PM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 08:57:04 +0200 > > > It seems to happen after an unaligned access fixup. > > You shouldn't be getting the unaligned fixup in the first place, > especially in the locations where you see them. I suspect that > once you see first fixup, all of the registers in the cpu have > been corrupted in one way or another. > > I suspect something fundamental gets corrupted, for example the > current register window (%cwp) is corrupted and that screws up all of > the registers so every single function starts accessing garbage. > > My suspicions lie in three places, the ftrace mcount() > stubs, stack_trace_flush(), or the new perf_arch_save_caller_regs() > since those are the three places offhand that could make > us potentially make us return to function in the wrong > register window. It happens without CONFIG_FUNCTION_TRACER as well (but it happens when the function tracer runs). And I hadn't your perf_arch_save_caller_regs() when I triggered this. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-05 19:40 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-05 20:46 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-05 20:46 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 21:40:58 +0200 > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > when the function tracer runs). And I hadn't your perf_arch_save_caller_regs() > when I triggered this. Good clues, thanks. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-05 20:46 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-05 20:46 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 21:40:58 +0200 > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > when the function tracer runs). And I hadn't your perf_arch_save_caller_regs() > when I triggered this. Good clues, thanks. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-05 19:40 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-06 2:15 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 2:15 UTC (permalink / raw) To: fweisbec Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus, srostedt From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 21:40:58 +0200 > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > when the function tracer runs). And I hadn't your > perf_arch_save_caller_regs() when I triggered this. I think there's still something wrong with the ring buffer stuff on architectures like sparc64. Stephen, I'm looking at the 8-byte alignment fix that was made a few weeks ago, commit: commit 2271048d1b3b0aabf83d25b29c20646dcabedc05 Author: Steven Rostedt <srostedt@redhat.com> Date: Thu Mar 18 17:54:19 2010 -0400 ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align and I'm not so sure it's completely correct. Originally, the ring buffer entries determine where the entry data resides (either &event->array[0] or &event->array[1]) based upon the length. Beforehand, in all cases: 1) If length could be encoded into event->type_len (ie. < RB_MAX_SMALL_DATA) then event->type_len holds the length and the event data starts at &event->array[0] 2) Otherwise (length > RB_MAX_SMALL_DATA) the length is encoded into event->array[0] and the event data starts at &event->array[1] But now, there is a new semantic when CONFIG_64BIT is true and CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is false (which isn't the right test btw, f.e. sparc 32-bit needs this handling just like sparc 64-bit does since it uses full 64-bit loads and stores to access u64 objects and thus will crash without proper alignment, the correct test should be just CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS being false). This new semantic is: 1) Entries always encode the length in ->array[0] and ->type_len is set to zero. And then there are special cases like events of type RINGBUF_TYPE_PADDING which, even though ->type_len is non-zero, encode a length field in ->array[0] which is used by the ring buffer iterators such as rb_event_length(), but this only applies only if event->time_delta is non-zero. (Phew!) The commit adjusts the code in rb_calculate_event_length() to force 8 byte chunks when RB_FORCE_8BYTE_ALIGNMENT is set. It also adjusted the rb_update_event() logic so that it unconditionally uses event->array[0] for the length on such platforms. However I don't see any logic added to ring_buffer_event_length() to handle this forcing. That alone can't explain the crashes Frederic and I are seeing, since only oprofile seems to use that helper function, but I can just imagine there might be other subtle bugs linering after the above commit. Anyways, that's just the inital potential problem I've discovered. I'll start auditing the rest of this code. I wonder if there's a simpler way to implement this alignment fix such that we don't have to constantly make sure scores of locations in ring_buffer.c get this magic exception case correct. We should probably also BUILD_BUG_ON() if BUF_PAGE_HDR_SIZE is not a multiple of the necessary alignment, since the ring buffer entries start at the end of that. Also I noticed (painfully :-) that 2.6.33 needs a backport of this alignment fix too, so we should submit it to -stable (once we sift out all the bugs of course). ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 2:15 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 2:15 UTC (permalink / raw) To: fweisbec Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus, srostedt From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 21:40:58 +0200 > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > when the function tracer runs). And I hadn't your > perf_arch_save_caller_regs() when I triggered this. I think there's still something wrong with the ring buffer stuff on architectures like sparc64. Stephen, I'm looking at the 8-byte alignment fix that was made a few weeks ago, commit: commit 2271048d1b3b0aabf83d25b29c20646dcabedc05 Author: Steven Rostedt <srostedt@redhat.com> Date: Thu Mar 18 17:54:19 2010 -0400 ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align and I'm not so sure it's completely correct. Originally, the ring buffer entries determine where the entry data resides (either &event->array[0] or &event->array[1]) based upon the length. Beforehand, in all cases: 1) If length could be encoded into event->type_len (ie. <= RB_MAX_SMALL_DATA) then event->type_len holds the length and the event data starts at &event->array[0] 2) Otherwise (length > RB_MAX_SMALL_DATA) the length is encoded into event->array[0] and the event data starts at &event->array[1] But now, there is a new semantic when CONFIG_64BIT is true and CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is false (which isn't the right test btw, f.e. sparc 32-bit needs this handling just like sparc 64-bit does since it uses full 64-bit loads and stores to access u64 objects and thus will crash without proper alignment, the correct test should be just CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS being false). This new semantic is: 1) Entries always encode the length in ->array[0] and ->type_len is set to zero. And then there are special cases like events of type RINGBUF_TYPE_PADDING which, even though ->type_len is non-zero, encode a length field in ->array[0] which is used by the ring buffer iterators such as rb_event_length(), but this only applies only if event->time_delta is non-zero. (Phew!) The commit adjusts the code in rb_calculate_event_length() to force 8 byte chunks when RB_FORCE_8BYTE_ALIGNMENT is set. It also adjusted the rb_update_event() logic so that it unconditionally uses event->array[0] for the length on such platforms. However I don't see any logic added to ring_buffer_event_length() to handle this forcing. That alone can't explain the crashes Frederic and I are seeing, since only oprofile seems to use that helper function, but I can just imagine there might be other subtle bugs linering after the above commit. Anyways, that's just the inital potential problem I've discovered. I'll start auditing the rest of this code. I wonder if there's a simpler way to implement this alignment fix such that we don't have to constantly make sure scores of locations in ring_buffer.c get this magic exception case correct. We should probably also BUILD_BUG_ON() if BUF_PAGE_HDR_SIZE is not a multiple of the necessary alignment, since the ring buffer entries start at the end of that. Also I noticed (painfully :-) that 2.6.33 needs a backport of this alignment fix too, so we should submit it to -stable (once we sift out all the bugs of course). ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 2:15 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-06 13:41 ` Steven Rostedt -1 siblings, 0 replies; 48+ messages in thread From: Steven Rostedt @ 2010-04-06 13:41 UTC (permalink / raw) To: David Miller Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus, Steven Rostedt David, It's best to send to my rostedt@goodmis.org account, just like it is best to send to your davem@davemloft.net ;-) On Mon, 2010-04-05 at 19:15 -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I think there's still something wrong with the ring buffer stuff on > architectures like sparc64. > > Stephen, I'm looking at the 8-byte alignment fix that was made a few > weeks ago, commit: > > commit 2271048d1b3b0aabf83d25b29c20646dcabedc05 > Author: Steven Rostedt <srostedt@redhat.com> > Date: Thu Mar 18 17:54:19 2010 -0400 > > ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align > > and I'm not so sure it's completely correct. > > Originally, the ring buffer entries determine where the entry data > resides (either &event->array[0] or &event->array[1]) based upon the > length. > > Beforehand, in all cases: > > 1) If length could be encoded into event->type_len (ie. <> RB_MAX_SMALL_DATA) then event->type_len holds the length > and the event data starts at &event->array[0] > > 2) Otherwise (length > RB_MAX_SMALL_DATA) the length is > encoded into event->array[0] and the event data starts at > &event->array[1] > > But now, there is a new semantic when CONFIG_64BIT is true and > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is false (which isn't the right > test btw, f.e. sparc 32-bit needs this handling just like sparc 64-bit > does since it uses full 64-bit loads and stores to access u64 objects > and thus will crash without proper alignment, the correct test should > be just CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS being false). OK, so the a 64 bit word still needs 64 bit alignment when storing to a data pointer. I wonder if we should just have a special copy in this case for the events and remove this patch in the ring buffer. That is: __assign_word(__entry->word, value); And have in !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS be: #define __assgin_word(dest, src) \ memcpy(&(dest), &(src), sizeof(src)); This would fix it for all. > > This new semantic is: > > 1) Entries always encode the length in ->array[0] and ->type_len > is set to zero. > > And then there are special cases like events of type > RINGBUF_TYPE_PADDING which, even though ->type_len is non-zero, encode > a length field in ->array[0] which is used by the ring buffer > iterators such as rb_event_length(), but this only applies only if > event->time_delta is non-zero. (Phew!) The RINGBUF_TYPE_PADDING is used to either fill the rest of the sub buffer, where alignment does not matter, or to replace a deleted event that had another event after, it, which should already be aligned. > > The commit adjusts the code in rb_calculate_event_length() to force 8 > byte chunks when RB_FORCE_8BYTE_ALIGNMENT is set. It also adjusted > the rb_update_event() logic so that it unconditionally uses > event->array[0] for the length on such platforms. > > However I don't see any logic added to ring_buffer_event_length() > to handle this forcing. That alone can't explain the crashes > Frederic and I are seeing, since only oprofile seems to use that > helper function, but I can just imagine there might be other > subtle bugs linering after the above commit. > > Anyways, that's just the inital potential problem I've discovered. > I'll start auditing the rest of this code. > > I wonder if there's a simpler way to implement this alignment fix such > that we don't have to constantly make sure scores of locations in > ring_buffer.c get this magic exception case correct. > > We should probably also BUILD_BUG_ON() if BUF_PAGE_HDR_SIZE is not > a multiple of the necessary alignment, since the ring buffer > entries start at the end of that. > > Also I noticed (painfully :-) that 2.6.33 needs a backport of this > alignment fix too, so we should submit it to -stable (once we sift > out all the bugs of course). What about removing the logic from the ring buffer and moving it to the TRACE_EVENT() macros as I suggested above? We would probably need a way to read the buffers too. I also know that Mathieu has some strange tricks to force alignment but I'm still not convinced it would make things any less fragile than what is already there. -- Steve ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 13:41 ` Steven Rostedt 0 siblings, 0 replies; 48+ messages in thread From: Steven Rostedt @ 2010-04-06 13:41 UTC (permalink / raw) To: David Miller Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus, Steven Rostedt David, It's best to send to my rostedt@goodmis.org account, just like it is best to send to your davem@davemloft.net ;-) On Mon, 2010-04-05 at 19:15 -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I think there's still something wrong with the ring buffer stuff on > architectures like sparc64. > > Stephen, I'm looking at the 8-byte alignment fix that was made a few > weeks ago, commit: > > commit 2271048d1b3b0aabf83d25b29c20646dcabedc05 > Author: Steven Rostedt <srostedt@redhat.com> > Date: Thu Mar 18 17:54:19 2010 -0400 > > ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align > > and I'm not so sure it's completely correct. > > Originally, the ring buffer entries determine where the entry data > resides (either &event->array[0] or &event->array[1]) based upon the > length. > > Beforehand, in all cases: > > 1) If length could be encoded into event->type_len (ie. <= > RB_MAX_SMALL_DATA) then event->type_len holds the length > and the event data starts at &event->array[0] > > 2) Otherwise (length > RB_MAX_SMALL_DATA) the length is > encoded into event->array[0] and the event data starts at > &event->array[1] > > But now, there is a new semantic when CONFIG_64BIT is true and > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is false (which isn't the right > test btw, f.e. sparc 32-bit needs this handling just like sparc 64-bit > does since it uses full 64-bit loads and stores to access u64 objects > and thus will crash without proper alignment, the correct test should > be just CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS being false). OK, so the a 64 bit word still needs 64 bit alignment when storing to a data pointer. I wonder if we should just have a special copy in this case for the events and remove this patch in the ring buffer. That is: __assign_word(__entry->word, value); And have in !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS be: #define __assgin_word(dest, src) \ memcpy(&(dest), &(src), sizeof(src)); This would fix it for all. > > This new semantic is: > > 1) Entries always encode the length in ->array[0] and ->type_len > is set to zero. > > And then there are special cases like events of type > RINGBUF_TYPE_PADDING which, even though ->type_len is non-zero, encode > a length field in ->array[0] which is used by the ring buffer > iterators such as rb_event_length(), but this only applies only if > event->time_delta is non-zero. (Phew!) The RINGBUF_TYPE_PADDING is used to either fill the rest of the sub buffer, where alignment does not matter, or to replace a deleted event that had another event after, it, which should already be aligned. > > The commit adjusts the code in rb_calculate_event_length() to force 8 > byte chunks when RB_FORCE_8BYTE_ALIGNMENT is set. It also adjusted > the rb_update_event() logic so that it unconditionally uses > event->array[0] for the length on such platforms. > > However I don't see any logic added to ring_buffer_event_length() > to handle this forcing. That alone can't explain the crashes > Frederic and I are seeing, since only oprofile seems to use that > helper function, but I can just imagine there might be other > subtle bugs linering after the above commit. > > Anyways, that's just the inital potential problem I've discovered. > I'll start auditing the rest of this code. > > I wonder if there's a simpler way to implement this alignment fix such > that we don't have to constantly make sure scores of locations in > ring_buffer.c get this magic exception case correct. > > We should probably also BUILD_BUG_ON() if BUF_PAGE_HDR_SIZE is not > a multiple of the necessary alignment, since the ring buffer > entries start at the end of that. > > Also I noticed (painfully :-) that 2.6.33 needs a backport of this > alignment fix too, so we should submit it to -stable (once we sift > out all the bugs of course). What about removing the logic from the ring buffer and moving it to the TRACE_EVENT() macros as I suggested above? We would probably need a way to read the buffers too. I also know that Mathieu has some strange tricks to force alignment but I'm still not convinced it would make things any less fragile than what is already there. -- Steve ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 13:41 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Steven Rostedt @ 2010-04-06 17:46 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 17:46 UTC (permalink / raw) To: srostedt Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus, rostedt From: Steven Rostedt <srostedt@redhat.com> Date: Tue, 06 Apr 2010 09:41:04 -0400 > It's best to send to my rostedt@goodmis.org account, just like it is > best to send to your davem@davemloft.net ;-) Ok then you should, like me, use it in your commits :-) > OK, so the a 64 bit word still needs 64 bit alignment when storing to a > data pointer. > > I wonder if we should just have a special copy in this case for the > events and remove this patch in the ring buffer. That is: > > __assign_word(__entry->word, value); > > And have in !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS be: > > #define __assgin_word(dest, src) \ > memcpy(&(dest), &(src), sizeof(src)); > > This would fix it for all. Doesn't work, first of all, because if gcc can see the types it will inline emit aligned loads and stores. Secondly, the accessors who read in these entries need them to be aligned too. > What about removing the logic from the ring buffer and moving it to the > TRACE_EVENT() macros as I suggested above? No, that makes no sense, just align the data types properly instead of making every single access site pay the price. Just fix the CPP test to handle 32-bit platforms with slow mis-alignment handling, everything else seems to be working properly after I fixed the NMI issues on sparc64. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 17:46 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 17:46 UTC (permalink / raw) To: srostedt Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus, rostedt From: Steven Rostedt <srostedt@redhat.com> Date: Tue, 06 Apr 2010 09:41:04 -0400 > It's best to send to my rostedt@goodmis.org account, just like it is > best to send to your davem@davemloft.net ;-) Ok then you should, like me, use it in your commits :-) > OK, so the a 64 bit word still needs 64 bit alignment when storing to a > data pointer. > > I wonder if we should just have a special copy in this case for the > events and remove this patch in the ring buffer. That is: > > __assign_word(__entry->word, value); > > And have in !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS be: > > #define __assgin_word(dest, src) \ > memcpy(&(dest), &(src), sizeof(src)); > > This would fix it for all. Doesn't work, first of all, because if gcc can see the types it will inline emit aligned loads and stores. Secondly, the accessors who read in these entries need them to be aligned too. > What about removing the logic from the ring buffer and moving it to the > TRACE_EVENT() macros as I suggested above? No, that makes no sense, just align the data types properly instead of making every single access site pay the price. Just fix the CPP test to handle 32-bit platforms with slow mis-alignment handling, everything else seems to be working properly after I fixed the NMI issues on sparc64. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 17:46 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-06 18:15 ` Steven Rostedt -1 siblings, 0 replies; 48+ messages in thread From: Steven Rostedt @ 2010-04-06 18:15 UTC (permalink / raw) To: David Miller Cc: srostedt, fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, 2010-04-06 at 10:46 -0700, David Miller wrote: > From: Steven Rostedt <srostedt@redhat.com> > Date: Tue, 06 Apr 2010 09:41:04 -0400 > > > It's best to send to my rostedt@goodmis.org account, just like it is > > best to send to your davem@davemloft.net ;-) > > Ok then you should, like me, use it in your commits :-) > My SoB is rostedt@goodmis.org, my commits are srostedt@redhat.com just because I want to give credit to the one that pays me for making those commits ;-) > > What about removing the logic from the ring buffer and moving it to the > > TRACE_EVENT() macros as I suggested above? > > No, that makes no sense, just align the data types properly > instead of making every single access site pay the price. OK > > Just fix the CPP test to handle 32-bit platforms with slow > mis-alignment handling, everything else seems to be working properly > after I fixed the NMI issues on sparc64. A little more work will need to be done since on 32bit, the page headers are 12 bytes, not 16, so we start off without being aligned 8bytes. But that too is fixable. -- Steve ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 18:15 ` Steven Rostedt 0 siblings, 0 replies; 48+ messages in thread From: Steven Rostedt @ 2010-04-06 18:15 UTC (permalink / raw) To: David Miller Cc: srostedt, fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, 2010-04-06 at 10:46 -0700, David Miller wrote: > From: Steven Rostedt <srostedt@redhat.com> > Date: Tue, 06 Apr 2010 09:41:04 -0400 > > > It's best to send to my rostedt@goodmis.org account, just like it is > > best to send to your davem@davemloft.net ;-) > > Ok then you should, like me, use it in your commits :-) > My SoB is rostedt@goodmis.org, my commits are srostedt@redhat.com just because I want to give credit to the one that pays me for making those commits ;-) > > What about removing the logic from the ring buffer and moving it to the > > TRACE_EVENT() macros as I suggested above? > > No, that makes no sense, just align the data types properly > instead of making every single access site pay the price. OK > > Just fix the CPP test to handle 32-bit platforms with slow > mis-alignment handling, everything else seems to be working properly > after I fixed the NMI issues on sparc64. A little more work will need to be done since on 32bit, the page headers are 12 bytes, not 16, so we start off without being aligned 8bytes. But that too is fixable. -- Steve ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 18:15 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Steven Rostedt @ 2010-04-06 21:17 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 21:17 UTC (permalink / raw) To: rostedt Cc: srostedt, fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Steven Rostedt <rostedt@goodmis.org> Date: Tue, 06 Apr 2010 14:15:58 -0400 > On Tue, 2010-04-06 at 10:46 -0700, David Miller wrote: >> Just fix the CPP test to handle 32-bit platforms with slow >> mis-alignment handling, everything else seems to be working properly >> after I fixed the NMI issues on sparc64. > > A little more work will need to be done since on 32bit, the page headers > are 12 bytes, not 16, so we start off without being aligned 8bytes. But > that too is fixable. Oh yeah the buffer_data_page, good point. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 21:17 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 21:17 UTC (permalink / raw) To: rostedt Cc: srostedt, fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Steven Rostedt <rostedt@goodmis.org> Date: Tue, 06 Apr 2010 14:15:58 -0400 > On Tue, 2010-04-06 at 10:46 -0700, David Miller wrote: >> Just fix the CPP test to handle 32-bit platforms with slow >> mis-alignment handling, everything else seems to be working properly >> after I fixed the NMI issues on sparc64. > > A little more work will need to be done since on 32bit, the page headers > are 12 bytes, not 16, so we start off without being aligned 8bytes. But > that too is fixable. Oh yeah the buffer_data_page, good point. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-05 19:40 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-06 9:50 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 9:50 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 21:40:58 +0200 > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > when the function tracer runs). And I hadn't your > perf_arch_save_caller_regs() when I triggered this. I figured out the problem, it's NMIs. As soon as I disable all of the NMI watchdog code, the problem goes away. This is because some parts of the NMI interrupt handling path are not marked with "notrace" and the various tracer code paths use local_irq_disable() (either directly or indirectly) which doesn't work with sparc64's NMI scheme. These essentially turn NMIs back on in the NMI handler before the NMI condition has been cleared, and thus we can re-enter with another NMI interrupt. We went through this for perf events, and we just made sure that local_irq_{enable,disable}() never occurs in any of the code paths in perf events that can be reached via the NMI interrupt handler. (the only one we had was sched_clock() and that was easily fixed) So, the first mcount hit we get is for rcu_nmi_enter() via nmi_enter(). I can see two ways to handle this: 1) Pepper 'notrace' markers onto rcu_nmi_enter(), rcu_nmi_exit() and whatever else I can see getting hit in the NMI interrupt handler code paths. 2) Add a hack to __raw_local_irq_save() that keeps it from writing anything to the interrupt level register if we have NMI's disabled. (this puts the cost on the entire kernel instead of just the NMI paths). #1 seems to be the intent on other platforms, the majority of the NMI code paths are protected with 'notrace' on x86, I bet nobody noticed that nmi_enter() when CONFIG_NO_HZ && !CONFIG_TINY_RCU ends up calling a function that does tracing. The next one we'll hit is atomic_notifier_call_chain() (amusingly notify_die() is marked 'notrace' but the one thing it calls isn't) For example, the following are the generic notrace annotations I would need to get sparc64 ftrace functioning again. (Frederic I will send you the full patch with the sparc specific bits under seperate cover in so that you can test things...) -------------------- kernel: Add notrace annotations to common routines invoked via NMI. This includes the atomic notifier call chain as well as the RCU specific NMI enter/exit handlers. Signed-off-by: David S. Miller <davem@davemloft.net> diff --git a/kernel/notifier.c b/kernel/notifier.c index 2488ba7..ceae89a 100644 --- a/kernel/notifier.c +++ b/kernel/notifier.c @@ -71,9 +71,9 @@ static int notifier_chain_unregister(struct notifier_block **nl, * @returns: notifier_call_chain returns the value returned by the * last notifier function called. */ -static int __kprobes notifier_call_chain(struct notifier_block **nl, - unsigned long val, void *v, - int nr_to_call, int *nr_calls) +static int notrace __kprobes notifier_call_chain(struct notifier_block **nl, + unsigned long val, void *v, + int nr_to_call, int *nr_calls) { int ret = NOTIFY_DONE; struct notifier_block *nb, *next_nb; @@ -172,9 +172,9 @@ EXPORT_SYMBOL_GPL(atomic_notifier_chain_unregister); * Otherwise the return value is the return value * of the last notifier function called. */ -int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, - unsigned long val, void *v, - int nr_to_call, int *nr_calls) +int notrace __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, + unsigned long val, void *v, + int nr_to_call, int *nr_calls) { int ret; @@ -185,8 +185,8 @@ int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, } EXPORT_SYMBOL_GPL(__atomic_notifier_call_chain); -int __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, - unsigned long val, void *v) +int notrace __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, + unsigned long val, void *v) { return __atomic_notifier_call_chain(nh, val, v, -1, NULL); } diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 3ec8160..d1a44ab 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -286,7 +286,7 @@ void rcu_exit_nohz(void) * irq handler running, this updates rdtp->dynticks_nmi to let the * RCU grace-period handling know that the CPU is active. */ -void rcu_nmi_enter(void) +void notrace rcu_nmi_enter(void) { struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); @@ -304,7 +304,7 @@ void rcu_nmi_enter(void) * irq handler running, this updates rdtp->dynticks_nmi to let the * RCU grace-period handling know that the CPU is no longer active. */ -void rcu_nmi_exit(void) +void notrace rcu_nmi_exit(void) { struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); ^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 9:50 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 9:50 UTC (permalink / raw) To: fweisbec; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Mon, 5 Apr 2010 21:40:58 +0200 > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > when the function tracer runs). And I hadn't your > perf_arch_save_caller_regs() when I triggered this. I figured out the problem, it's NMIs. As soon as I disable all of the NMI watchdog code, the problem goes away. This is because some parts of the NMI interrupt handling path are not marked with "notrace" and the various tracer code paths use local_irq_disable() (either directly or indirectly) which doesn't work with sparc64's NMI scheme. These essentially turn NMIs back on in the NMI handler before the NMI condition has been cleared, and thus we can re-enter with another NMI interrupt. We went through this for perf events, and we just made sure that local_irq_{enable,disable}() never occurs in any of the code paths in perf events that can be reached via the NMI interrupt handler. (the only one we had was sched_clock() and that was easily fixed) So, the first mcount hit we get is for rcu_nmi_enter() via nmi_enter(). I can see two ways to handle this: 1) Pepper 'notrace' markers onto rcu_nmi_enter(), rcu_nmi_exit() and whatever else I can see getting hit in the NMI interrupt handler code paths. 2) Add a hack to __raw_local_irq_save() that keeps it from writing anything to the interrupt level register if we have NMI's disabled. (this puts the cost on the entire kernel instead of just the NMI paths). #1 seems to be the intent on other platforms, the majority of the NMI code paths are protected with 'notrace' on x86, I bet nobody noticed that nmi_enter() when CONFIG_NO_HZ && !CONFIG_TINY_RCU ends up calling a function that does tracing. The next one we'll hit is atomic_notifier_call_chain() (amusingly notify_die() is marked 'notrace' but the one thing it calls isn't) For example, the following are the generic notrace annotations I would need to get sparc64 ftrace functioning again. (Frederic I will send you the full patch with the sparc specific bits under seperate cover in so that you can test things...) -------------------- kernel: Add notrace annotations to common routines invoked via NMI. This includes the atomic notifier call chain as well as the RCU specific NMI enter/exit handlers. Signed-off-by: David S. Miller <davem@davemloft.net> diff --git a/kernel/notifier.c b/kernel/notifier.c index 2488ba7..ceae89a 100644 --- a/kernel/notifier.c +++ b/kernel/notifier.c @@ -71,9 +71,9 @@ static int notifier_chain_unregister(struct notifier_block **nl, * @returns: notifier_call_chain returns the value returned by the * last notifier function called. */ -static int __kprobes notifier_call_chain(struct notifier_block **nl, - unsigned long val, void *v, - int nr_to_call, int *nr_calls) +static int notrace __kprobes notifier_call_chain(struct notifier_block **nl, + unsigned long val, void *v, + int nr_to_call, int *nr_calls) { int ret = NOTIFY_DONE; struct notifier_block *nb, *next_nb; @@ -172,9 +172,9 @@ EXPORT_SYMBOL_GPL(atomic_notifier_chain_unregister); * Otherwise the return value is the return value * of the last notifier function called. */ -int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, - unsigned long val, void *v, - int nr_to_call, int *nr_calls) +int notrace __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, + unsigned long val, void *v, + int nr_to_call, int *nr_calls) { int ret; @@ -185,8 +185,8 @@ int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, } EXPORT_SYMBOL_GPL(__atomic_notifier_call_chain); -int __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, - unsigned long val, void *v) +int notrace __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, + unsigned long val, void *v) { return __atomic_notifier_call_chain(nh, val, v, -1, NULL); } diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 3ec8160..d1a44ab 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -286,7 +286,7 @@ void rcu_exit_nohz(void) * irq handler running, this updates rdtp->dynticks_nmi to let the * RCU grace-period handling know that the CPU is active. */ -void rcu_nmi_enter(void) +void notrace rcu_nmi_enter(void) { struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); @@ -304,7 +304,7 @@ void rcu_nmi_enter(void) * irq handler running, this updates rdtp->dynticks_nmi to let the * RCU grace-period handling know that the CPU is no longer active. */ -void rcu_nmi_exit(void) +void notrace rcu_nmi_exit(void) { struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); ^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 9:50 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-06 10:19 ` Frederic Weisbecker -1 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-06 10:19 UTC (permalink / raw) To: David Miller, Steven Rostedt Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) > > So, the first mcount hit we get is for rcu_nmi_enter() via > nmi_enter(). > > I can see two ways to handle this: > > 1) Pepper 'notrace' markers onto rcu_nmi_enter(), rcu_nmi_exit() > and whatever else I can see getting hit in the NMI interrupt > handler code paths. > > 2) Add a hack to __raw_local_irq_save() that keeps it from writing > anything to the interrupt level register if we have NMI's disabled. > (this puts the cost on the entire kernel instead of just the NMI > paths). > > #1 seems to be the intent on other platforms, the majority of the NMI > code paths are protected with 'notrace' on x86, I bet nobody noticed > that nmi_enter() when CONFIG_NO_HZ && !CONFIG_TINY_RCU ends up calling > a function that does tracing. > > The next one we'll hit is atomic_notifier_call_chain() (amusingly > notify_die() is marked 'notrace' but the one thing it calls isn't) > > For example, the following are the generic notrace annotations I > would need to get sparc64 ftrace functioning again. (Frederic I will > send you the full patch with the sparc specific bits under seperate > cover in so that you can test things...) > > -------------------- > kernel: Add notrace annotations to common routines invoked via NMI. > > This includes the atomic notifier call chain as well as the RCU > specific NMI enter/exit handlers. Ok, but this as a cause looks weird. The function tracer handler disables interrupts. I don't remember exactly why but we also have a no-preempt mode that only disables preemption instead: (function_trace_call_preempt_only()) It means having such interrupt reentrancy is not a problem. In fact, the function tracer is not reentrant: data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); if (likely(disabled = 1)) trace_function(tr, ip, parent_ip, flags, pc); atomic_dec(&data->disabled); we do this just to prevent from tracing recursion (in case we have a traceable function in the inner function tracing path). Nmis are just supposed to be fine with the function tracer. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 10:19 ` Frederic Weisbecker 0 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-06 10:19 UTC (permalink / raw) To: David Miller, Steven Rostedt Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) > > So, the first mcount hit we get is for rcu_nmi_enter() via > nmi_enter(). > > I can see two ways to handle this: > > 1) Pepper 'notrace' markers onto rcu_nmi_enter(), rcu_nmi_exit() > and whatever else I can see getting hit in the NMI interrupt > handler code paths. > > 2) Add a hack to __raw_local_irq_save() that keeps it from writing > anything to the interrupt level register if we have NMI's disabled. > (this puts the cost on the entire kernel instead of just the NMI > paths). > > #1 seems to be the intent on other platforms, the majority of the NMI > code paths are protected with 'notrace' on x86, I bet nobody noticed > that nmi_enter() when CONFIG_NO_HZ && !CONFIG_TINY_RCU ends up calling > a function that does tracing. > > The next one we'll hit is atomic_notifier_call_chain() (amusingly > notify_die() is marked 'notrace' but the one thing it calls isn't) > > For example, the following are the generic notrace annotations I > would need to get sparc64 ftrace functioning again. (Frederic I will > send you the full patch with the sparc specific bits under seperate > cover in so that you can test things...) > > -------------------- > kernel: Add notrace annotations to common routines invoked via NMI. > > This includes the atomic notifier call chain as well as the RCU > specific NMI enter/exit handlers. Ok, but this as a cause looks weird. The function tracer handler disables interrupts. I don't remember exactly why but we also have a no-preempt mode that only disables preemption instead: (function_trace_call_preempt_only()) It means having such interrupt reentrancy is not a problem. In fact, the function tracer is not reentrant: data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); if (likely(disabled == 1)) trace_function(tr, ip, parent_ip, flags, pc); atomic_dec(&data->disabled); we do this just to prevent from tracing recursion (in case we have a traceable function in the inner function tracing path). Nmis are just supposed to be fine with the function tracer. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 10:19 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-06 10:28 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 10:28 UTC (permalink / raw) To: fweisbec Cc: rostedt, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Tue, 6 Apr 2010 12:19:28 +0200 > It means having such interrupt reentrancy is not a problem. It's not reentrancy. It's the fact that local_irq_disable() (read it again, it's the "disable" that re-renables NMIs on sparc64) turns NMIs back on even in code where we are still trying to figure out how to service the NMI still. It's because we implement NMIs on sparc64 by having the performance counter interrupt come in on the level 15 interrupt, and we run the entire kernel at level 14 when IRQs are "disabled". ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 10:28 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 10:28 UTC (permalink / raw) To: fweisbec Cc: rostedt, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus From: Frederic Weisbecker <fweisbec@gmail.com> Date: Tue, 6 Apr 2010 12:19:28 +0200 > It means having such interrupt reentrancy is not a problem. It's not reentrancy. It's the fact that local_irq_disable() (read it again, it's the "disable" that re-renables NMIs on sparc64) turns NMIs back on even in code where we are still trying to figure out how to service the NMI still. It's because we implement NMIs on sparc64 by having the performance counter interrupt come in on the level 15 interrupt, and we run the entire kernel at level 14 when IRQs are "disabled". ^ permalink raw reply [flat|nested] 48+ messages in thread
* [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI 2010-04-06 9:50 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-06 11:12 ` Peter Zijlstra -1 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 11:12 UTC (permalink / raw) To: David Miller; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 02:50 -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) One thing we can do is make the code WARN about this, how about something like the below --- Subject: lockdep: WARN about local_irq_{en,dis}able in NMI context Some architectures implement NMIs by using IRQ priority levels and mixing local_irq_{en,dis}able() with NMIs will give unexpected results. Hence disallow this in general and WARN about it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> --- kernel/lockdep.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 08e6f76..06ec1c7 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2341,6 +2341,11 @@ EXPORT_SYMBOL(trace_hardirqs_on_caller); void trace_hardirqs_on(void) { + /* + * Some architectures can't deal with local_irq_{enable,disable} + * from NMI context (SPARC), enforce this. + */ + WARN_ON_ONCE(in_nmi()); trace_hardirqs_on_caller(CALLER_ADDR0); } EXPORT_SYMBOL(trace_hardirqs_on); @@ -2375,6 +2380,11 @@ EXPORT_SYMBOL(trace_hardirqs_off_caller); void trace_hardirqs_off(void) { + /* + * Some architectures can't deal with local_irq_{enable,disable} + * from NMI context (SPARC), enforce this. + */ + WARN_ON_ONCE(in_nmi()); trace_hardirqs_off_caller(CALLER_ADDR0); } EXPORT_SYMBOL(trace_hardirqs_off); ^ permalink raw reply related [flat|nested] 48+ messages in thread
* [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context @ 2010-04-06 11:12 ` Peter Zijlstra 0 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 11:12 UTC (permalink / raw) To: David Miller; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 02:50 -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) One thing we can do is make the code WARN about this, how about something like the below --- Subject: lockdep: WARN about local_irq_{en,dis}able in NMI context Some architectures implement NMIs by using IRQ priority levels and mixing local_irq_{en,dis}able() with NMIs will give unexpected results. Hence disallow this in general and WARN about it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> --- kernel/lockdep.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 08e6f76..06ec1c7 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2341,6 +2341,11 @@ EXPORT_SYMBOL(trace_hardirqs_on_caller); void trace_hardirqs_on(void) { + /* + * Some architectures can't deal with local_irq_{enable,disable} + * from NMI context (SPARC), enforce this. + */ + WARN_ON_ONCE(in_nmi()); trace_hardirqs_on_caller(CALLER_ADDR0); } EXPORT_SYMBOL(trace_hardirqs_on); @@ -2375,6 +2380,11 @@ EXPORT_SYMBOL(trace_hardirqs_off_caller); void trace_hardirqs_off(void) { + /* + * Some architectures can't deal with local_irq_{enable,disable} + * from NMI context (SPARC), enforce this. + */ + WARN_ON_ONCE(in_nmi()); trace_hardirqs_off_caller(CALLER_ADDR0); } EXPORT_SYMBOL(trace_hardirqs_off); ^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI 2010-04-06 11:12 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context Peter Zijlstra @ 2010-04-06 11:13 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 11:13 UTC (permalink / raw) To: peterz; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus From: Peter Zijlstra <peterz@infradead.org> Date: Tue, 06 Apr 2010 13:12:01 +0200 > One thing we can do is make the code WARN about this, how about > something like the below It's going to warn every bootup in cpu_clock() on x86. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context @ 2010-04-06 11:13 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 11:13 UTC (permalink / raw) To: peterz; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus From: Peter Zijlstra <peterz@infradead.org> Date: Tue, 06 Apr 2010 13:12:01 +0200 > One thing we can do is make the code WARN about this, how about > something like the below It's going to warn every bootup in cpu_clock() on x86. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI 2010-04-06 11:13 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context David Miller @ 2010-04-06 11:20 ` Peter Zijlstra -1 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 11:20 UTC (permalink / raw) To: David Miller; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 04:13 -0700, David Miller wrote: > From: Peter Zijlstra <peterz@infradead.org> > Date: Tue, 06 Apr 2010 13:12:01 +0200 > > > One thing we can do is make the code WARN about this, how about > > something like the below > > It's going to warn every bootup in cpu_clock() on x86. *sigh*, yes, we could hack around that I suppose.. it would be nice to automate this check though, I bet you don't fancy tracking down more such splats than you have to. You could of course insert the debug code into your arch routines but that would limit the coverage checks to whatever you happen to run. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context @ 2010-04-06 11:20 ` Peter Zijlstra 0 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 11:20 UTC (permalink / raw) To: David Miller; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 04:13 -0700, David Miller wrote: > From: Peter Zijlstra <peterz@infradead.org> > Date: Tue, 06 Apr 2010 13:12:01 +0200 > > > One thing we can do is make the code WARN about this, how about > > something like the below > > It's going to warn every bootup in cpu_clock() on x86. *sigh*, yes, we could hack around that I suppose.. it would be nice to automate this check though, I bet you don't fancy tracking down more such splats than you have to. You could of course insert the debug code into your arch routines but that would limit the coverage checks to whatever you happen to run. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI 2010-04-06 11:20 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context Peter Zijlstra @ 2010-04-06 11:22 ` David Miller -1 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 11:22 UTC (permalink / raw) To: peterz; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus From: Peter Zijlstra <peterz@infradead.org> Date: Tue, 06 Apr 2010 13:20:19 +0200 > On Tue, 2010-04-06 at 04:13 -0700, David Miller wrote: >> From: Peter Zijlstra <peterz@infradead.org> >> Date: Tue, 06 Apr 2010 13:12:01 +0200 >> >> > One thing we can do is make the code WARN about this, how about >> > something like the below >> >> It's going to warn every bootup in cpu_clock() on x86. > > *sigh*, yes, we could hack around that I suppose.. it would be nice to > automate this check though, I bet you don't fancy tracking down more > such splats than you have to. > > You could of course insert the debug code into your arch routines but > that would limit the coverage checks to whatever you happen to run. Yes, f.e. you could add local_irq_*_nmi() or similar that don't complain when called inside of an NMI. I would certainly welcome this debugging facility, for sure! It would have saved me two days of work this time, in fact. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context @ 2010-04-06 11:22 ` David Miller 0 siblings, 0 replies; 48+ messages in thread From: David Miller @ 2010-04-06 11:22 UTC (permalink / raw) To: peterz; +Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, paulus From: Peter Zijlstra <peterz@infradead.org> Date: Tue, 06 Apr 2010 13:20:19 +0200 > On Tue, 2010-04-06 at 04:13 -0700, David Miller wrote: >> From: Peter Zijlstra <peterz@infradead.org> >> Date: Tue, 06 Apr 2010 13:12:01 +0200 >> >> > One thing we can do is make the code WARN about this, how about >> > something like the below >> >> It's going to warn every bootup in cpu_clock() on x86. > > *sigh*, yes, we could hack around that I suppose.. it would be nice to > automate this check though, I bet you don't fancy tracking down more > such splats than you have to. > > You could of course insert the debug code into your arch routines but > that would limit the coverage checks to whatever you happen to run. Yes, f.e. you could add local_irq_*_nmi() or similar that don't complain when called inside of an NMI. I would certainly welcome this debugging facility, for sure! It would have saved me two days of work this time, in fact. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 9:50 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-06 11:38 ` Frederic Weisbecker -1 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-06 11:38 UTC (permalink / raw) To: David Miller; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) That reminds me we have a new pair of local_irq_disable/enable in perf_event_task_output(), which path can be taken by hardware pmu events. See this patch: 8bb39f9aa068262732fe44b965d7a6eb5a5a7d67 perf: Fix 'perf sched record' deadlock ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 11:38 ` Frederic Weisbecker 0 siblings, 0 replies; 48+ messages in thread From: Frederic Weisbecker @ 2010-04-06 11:38 UTC (permalink / raw) To: David Miller; +Cc: sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) That reminds me we have a new pair of local_irq_disable/enable in perf_event_task_output(), which path can be taken by hardware pmu events. See this patch: 8bb39f9aa068262732fe44b965d7a6eb5a5a7d67 perf: Fix 'perf sched record' deadlock ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 11:38 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker @ 2010-04-06 11:51 ` Peter Zijlstra -1 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 11:51 UTC (permalink / raw) To: Frederic Weisbecker Cc: David Miller, sparclinux, linux-kernel, mingo, acme, paulus, Mike Galbraith On Tue, 2010-04-06 at 13:38 +0200, Frederic Weisbecker wrote: > On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > > From: Frederic Weisbecker <fweisbec@gmail.com> > > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > > when the function tracer runs). And I hadn't your > > > perf_arch_save_caller_regs() when I triggered this. > > > > I figured out the problem, it's NMIs. As soon as I disable all of the > > NMI watchdog code, the problem goes away. > > > > This is because some parts of the NMI interrupt handling path are not > > marked with "notrace" and the various tracer code paths use > > local_irq_disable() (either directly or indirectly) which doesn't work > > with sparc64's NMI scheme. These essentially turn NMIs back on in the > > NMI handler before the NMI condition has been cleared, and thus we can > > re-enter with another NMI interrupt. > > > > We went through this for perf events, and we just made sure that > > local_irq_{enable,disable}() never occurs in any of the code paths in > > perf events that can be reached via the NMI interrupt handler. (the > > only one we had was sched_clock() and that was easily fixed) > > > > That reminds me we have a new pair of local_irq_disable/enable > in perf_event_task_output(), which path can be taken by hardware > pmu events. > > See this patch: > > 8bb39f9aa068262732fe44b965d7a6eb5a5a7d67 > perf: Fix 'perf sched record' deadlock ARGH.. yes Also, I guess that should live in perf_output_lock/unlock() not in perf_event_task_output(). Egads, how to fix that ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 11:51 ` Peter Zijlstra 0 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 11:51 UTC (permalink / raw) To: Frederic Weisbecker Cc: David Miller, sparclinux, linux-kernel, mingo, acme, paulus, Mike Galbraith On Tue, 2010-04-06 at 13:38 +0200, Frederic Weisbecker wrote: > On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > > From: Frederic Weisbecker <fweisbec@gmail.com> > > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > > when the function tracer runs). And I hadn't your > > > perf_arch_save_caller_regs() when I triggered this. > > > > I figured out the problem, it's NMIs. As soon as I disable all of the > > NMI watchdog code, the problem goes away. > > > > This is because some parts of the NMI interrupt handling path are not > > marked with "notrace" and the various tracer code paths use > > local_irq_disable() (either directly or indirectly) which doesn't work > > with sparc64's NMI scheme. These essentially turn NMIs back on in the > > NMI handler before the NMI condition has been cleared, and thus we can > > re-enter with another NMI interrupt. > > > > We went through this for perf events, and we just made sure that > > local_irq_{enable,disable}() never occurs in any of the code paths in > > perf events that can be reached via the NMI interrupt handler. (the > > only one we had was sched_clock() and that was easily fixed) > > > > That reminds me we have a new pair of local_irq_disable/enable > in perf_event_task_output(), which path can be taken by hardware > pmu events. > > See this patch: > > 8bb39f9aa068262732fe44b965d7a6eb5a5a7d67 > perf: Fix 'perf sched record' deadlock ARGH.. yes Also, I guess that should live in perf_output_lock/unlock() not in perf_event_task_output(). Egads, how to fix that ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 11:51 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Peter Zijlstra @ 2010-04-06 12:54 ` Mike Galbraith -1 siblings, 0 replies; 48+ messages in thread From: Mike Galbraith @ 2010-04-06 12:54 UTC (permalink / raw) To: Peter Zijlstra Cc: Frederic Weisbecker, David Miller, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 13:51 +0200, Peter Zijlstra wrote: > On Tue, 2010-04-06 at 13:38 +0200, Frederic Weisbecker wrote: > > On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > > > From: Frederic Weisbecker <fweisbec@gmail.com> > > > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > > > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > > > when the function tracer runs). And I hadn't your > > > > perf_arch_save_caller_regs() when I triggered this. > > > > > > I figured out the problem, it's NMIs. As soon as I disable all of the > > > NMI watchdog code, the problem goes away. > > > > > > This is because some parts of the NMI interrupt handling path are not > > > marked with "notrace" and the various tracer code paths use > > > local_irq_disable() (either directly or indirectly) which doesn't work > > > with sparc64's NMI scheme. These essentially turn NMIs back on in the > > > NMI handler before the NMI condition has been cleared, and thus we can > > > re-enter with another NMI interrupt. > > > > > > We went through this for perf events, and we just made sure that > > > local_irq_{enable,disable}() never occurs in any of the code paths in > > > perf events that can be reached via the NMI interrupt handler. (the > > > only one we had was sched_clock() and that was easily fixed) > > > > > > > > That reminds me we have a new pair of local_irq_disable/enable > > in perf_event_task_output(), which path can be taken by hardware > > pmu events. > > > > See this patch: > > > > 8bb39f9aa068262732fe44b965d7a6eb5a5a7d67 > > perf: Fix 'perf sched record' deadlock > > ARGH.. yes > > Also, I guess that should live in perf_output_lock/unlock() not in > perf_event_task_output(). > > Egads, how to fix that Damn, so deadlock fix isn't a fix. No idea. -Mike ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 12:54 ` Mike Galbraith 0 siblings, 0 replies; 48+ messages in thread From: Mike Galbraith @ 2010-04-06 12:54 UTC (permalink / raw) To: Peter Zijlstra Cc: Frederic Weisbecker, David Miller, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 13:51 +0200, Peter Zijlstra wrote: > On Tue, 2010-04-06 at 13:38 +0200, Frederic Weisbecker wrote: > > On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > > > From: Frederic Weisbecker <fweisbec@gmail.com> > > > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > > > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > > > when the function tracer runs). And I hadn't your > > > > perf_arch_save_caller_regs() when I triggered this. > > > > > > I figured out the problem, it's NMIs. As soon as I disable all of the > > > NMI watchdog code, the problem goes away. > > > > > > This is because some parts of the NMI interrupt handling path are not > > > marked with "notrace" and the various tracer code paths use > > > local_irq_disable() (either directly or indirectly) which doesn't work > > > with sparc64's NMI scheme. These essentially turn NMIs back on in the > > > NMI handler before the NMI condition has been cleared, and thus we can > > > re-enter with another NMI interrupt. > > > > > > We went through this for perf events, and we just made sure that > > > local_irq_{enable,disable}() never occurs in any of the code paths in > > > perf events that can be reached via the NMI interrupt handler. (the > > > only one we had was sched_clock() and that was easily fixed) > > > > > > > > That reminds me we have a new pair of local_irq_disable/enable > > in perf_event_task_output(), which path can be taken by hardware > > pmu events. > > > > See this patch: > > > > 8bb39f9aa068262732fe44b965d7a6eb5a5a7d67 > > perf: Fix 'perf sched record' deadlock > > ARGH.. yes > > Also, I guess that should live in perf_output_lock/unlock() not in > perf_event_task_output(). > > Egads, how to fix that Damn, so deadlock fix isn't a fix. No idea. -Mike ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 12:54 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Mike Galbraith @ 2010-04-06 12:57 ` Peter Zijlstra -1 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 12:57 UTC (permalink / raw) To: Mike Galbraith Cc: Frederic Weisbecker, David Miller, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 14:54 +0200, Mike Galbraith wrote: > > ARGH.. yes > > > > Also, I guess that should live in perf_output_lock/unlock() not in > > perf_event_task_output(). > > > > Egads, how to fix that > > Damn, so deadlock fix isn't a fix. No idea. well it is,. but it breaks sparc.. I'm currently compile testing a bunch to fix all that up by doing what davem suggested: local_irq_save_nmi()/local_irq_restore_nmi(). ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 12:57 ` Peter Zijlstra 0 siblings, 0 replies; 48+ messages in thread From: Peter Zijlstra @ 2010-04-06 12:57 UTC (permalink / raw) To: Mike Galbraith Cc: Frederic Weisbecker, David Miller, sparclinux, linux-kernel, mingo, acme, paulus On Tue, 2010-04-06 at 14:54 +0200, Mike Galbraith wrote: > > ARGH.. yes > > > > Also, I guess that should live in perf_output_lock/unlock() not in > > perf_event_task_output(). > > > > Egads, how to fix that > > Damn, so deadlock fix isn't a fix. No idea. well it is,. but it breaks sparc.. I'm currently compile testing a bunch to fix all that up by doing what davem suggested: local_irq_save_nmi()/local_irq_restore_nmi(). ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock 2010-04-06 9:50 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller @ 2010-04-06 18:04 ` Paul E. McKenney -1 siblings, 0 replies; 48+ messages in thread From: Paul E. McKenney @ 2010-04-06 18:04 UTC (permalink / raw) To: David Miller Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) > > So, the first mcount hit we get is for rcu_nmi_enter() via > nmi_enter(). > > I can see two ways to handle this: > > 1) Pepper 'notrace' markers onto rcu_nmi_enter(), rcu_nmi_exit() > and whatever else I can see getting hit in the NMI interrupt > handler code paths. > > 2) Add a hack to __raw_local_irq_save() that keeps it from writing > anything to the interrupt level register if we have NMI's disabled. > (this puts the cost on the entire kernel instead of just the NMI > paths). > > #1 seems to be the intent on other platforms, the majority of the NMI > code paths are protected with 'notrace' on x86, I bet nobody noticed > that nmi_enter() when CONFIG_NO_HZ && !CONFIG_TINY_RCU ends up calling > a function that does tracing. > > The next one we'll hit is atomic_notifier_call_chain() (amusingly > notify_die() is marked 'notrace' but the one thing it calls isn't) > > For example, the following are the generic notrace annotations I > would need to get sparc64 ftrace functioning again. (Frederic I will > send you the full patch with the sparc specific bits under seperate > cover in so that you can test things...) > > -------------------- > kernel: Add notrace annotations to common routines invoked via NMI. > > This includes the atomic notifier call chain as well as the RCU > specific NMI enter/exit handlers. Assuming that static inline functions don't need the notrace flag: Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> (If static inline functions -do- need notrace, then the definitions in include/linux/hardirq.h need to be tagged as well.) > Signed-off-by: David S. Miller <davem@davemloft.net> > > diff --git a/kernel/notifier.c b/kernel/notifier.c > index 2488ba7..ceae89a 100644 > --- a/kernel/notifier.c > +++ b/kernel/notifier.c > @@ -71,9 +71,9 @@ static int notifier_chain_unregister(struct notifier_block **nl, > * @returns: notifier_call_chain returns the value returned by the > * last notifier function called. > */ > -static int __kprobes notifier_call_chain(struct notifier_block **nl, > - unsigned long val, void *v, > - int nr_to_call, int *nr_calls) > +static int notrace __kprobes notifier_call_chain(struct notifier_block **nl, > + unsigned long val, void *v, > + int nr_to_call, int *nr_calls) > { > int ret = NOTIFY_DONE; > struct notifier_block *nb, *next_nb; > @@ -172,9 +172,9 @@ EXPORT_SYMBOL_GPL(atomic_notifier_chain_unregister); > * Otherwise the return value is the return value > * of the last notifier function called. > */ > -int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, > - unsigned long val, void *v, > - int nr_to_call, int *nr_calls) > +int notrace __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, > + unsigned long val, void *v, > + int nr_to_call, int *nr_calls) > { > int ret; > > @@ -185,8 +185,8 @@ int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, > } > EXPORT_SYMBOL_GPL(__atomic_notifier_call_chain); > > -int __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, > - unsigned long val, void *v) > +int notrace __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, > + unsigned long val, void *v) > { > return __atomic_notifier_call_chain(nh, val, v, -1, NULL); > } > diff --git a/kernel/rcutree.c b/kernel/rcutree.c > index 3ec8160..d1a44ab 100644 > --- a/kernel/rcutree.c > +++ b/kernel/rcutree.c > @@ -286,7 +286,7 @@ void rcu_exit_nohz(void) > * irq handler running, this updates rdtp->dynticks_nmi to let the > * RCU grace-period handling know that the CPU is active. > */ > -void rcu_nmi_enter(void) > +void notrace rcu_nmi_enter(void) > { > struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); > > @@ -304,7 +304,7 @@ void rcu_nmi_enter(void) > * irq handler running, this updates rdtp->dynticks_nmi to let the > * RCU grace-period handling know that the CPU is no longer active. > */ > -void rcu_nmi_exit(void) > +void notrace rcu_nmi_exit(void) > { > struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 @ 2010-04-06 18:04 ` Paul E. McKenney 0 siblings, 0 replies; 48+ messages in thread From: Paul E. McKenney @ 2010-04-06 18:04 UTC (permalink / raw) To: David Miller Cc: fweisbec, sparclinux, linux-kernel, mingo, acme, a.p.zijlstra, paulus On Tue, Apr 06, 2010 at 02:50:49AM -0700, David Miller wrote: > From: Frederic Weisbecker <fweisbec@gmail.com> > Date: Mon, 5 Apr 2010 21:40:58 +0200 > > > It happens without CONFIG_FUNCTION_TRACER as well (but it happens > > when the function tracer runs). And I hadn't your > > perf_arch_save_caller_regs() when I triggered this. > > I figured out the problem, it's NMIs. As soon as I disable all of the > NMI watchdog code, the problem goes away. > > This is because some parts of the NMI interrupt handling path are not > marked with "notrace" and the various tracer code paths use > local_irq_disable() (either directly or indirectly) which doesn't work > with sparc64's NMI scheme. These essentially turn NMIs back on in the > NMI handler before the NMI condition has been cleared, and thus we can > re-enter with another NMI interrupt. > > We went through this for perf events, and we just made sure that > local_irq_{enable,disable}() never occurs in any of the code paths in > perf events that can be reached via the NMI interrupt handler. (the > only one we had was sched_clock() and that was easily fixed) > > So, the first mcount hit we get is for rcu_nmi_enter() via > nmi_enter(). > > I can see two ways to handle this: > > 1) Pepper 'notrace' markers onto rcu_nmi_enter(), rcu_nmi_exit() > and whatever else I can see getting hit in the NMI interrupt > handler code paths. > > 2) Add a hack to __raw_local_irq_save() that keeps it from writing > anything to the interrupt level register if we have NMI's disabled. > (this puts the cost on the entire kernel instead of just the NMI > paths). > > #1 seems to be the intent on other platforms, the majority of the NMI > code paths are protected with 'notrace' on x86, I bet nobody noticed > that nmi_enter() when CONFIG_NO_HZ && !CONFIG_TINY_RCU ends up calling > a function that does tracing. > > The next one we'll hit is atomic_notifier_call_chain() (amusingly > notify_die() is marked 'notrace' but the one thing it calls isn't) > > For example, the following are the generic notrace annotations I > would need to get sparc64 ftrace functioning again. (Frederic I will > send you the full patch with the sparc specific bits under seperate > cover in so that you can test things...) > > -------------------- > kernel: Add notrace annotations to common routines invoked via NMI. > > This includes the atomic notifier call chain as well as the RCU > specific NMI enter/exit handlers. Assuming that static inline functions don't need the notrace flag: Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> (If static inline functions -do- need notrace, then the definitions in include/linux/hardirq.h need to be tagged as well.) > Signed-off-by: David S. Miller <davem@davemloft.net> > > diff --git a/kernel/notifier.c b/kernel/notifier.c > index 2488ba7..ceae89a 100644 > --- a/kernel/notifier.c > +++ b/kernel/notifier.c > @@ -71,9 +71,9 @@ static int notifier_chain_unregister(struct notifier_block **nl, > * @returns: notifier_call_chain returns the value returned by the > * last notifier function called. > */ > -static int __kprobes notifier_call_chain(struct notifier_block **nl, > - unsigned long val, void *v, > - int nr_to_call, int *nr_calls) > +static int notrace __kprobes notifier_call_chain(struct notifier_block **nl, > + unsigned long val, void *v, > + int nr_to_call, int *nr_calls) > { > int ret = NOTIFY_DONE; > struct notifier_block *nb, *next_nb; > @@ -172,9 +172,9 @@ EXPORT_SYMBOL_GPL(atomic_notifier_chain_unregister); > * Otherwise the return value is the return value > * of the last notifier function called. > */ > -int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, > - unsigned long val, void *v, > - int nr_to_call, int *nr_calls) > +int notrace __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, > + unsigned long val, void *v, > + int nr_to_call, int *nr_calls) > { > int ret; > > @@ -185,8 +185,8 @@ int __kprobes __atomic_notifier_call_chain(struct atomic_notifier_head *nh, > } > EXPORT_SYMBOL_GPL(__atomic_notifier_call_chain); > > -int __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, > - unsigned long val, void *v) > +int notrace __kprobes atomic_notifier_call_chain(struct atomic_notifier_head *nh, > + unsigned long val, void *v) > { > return __atomic_notifier_call_chain(nh, val, v, -1, NULL); > } > diff --git a/kernel/rcutree.c b/kernel/rcutree.c > index 3ec8160..d1a44ab 100644 > --- a/kernel/rcutree.c > +++ b/kernel/rcutree.c > @@ -286,7 +286,7 @@ void rcu_exit_nohz(void) > * irq handler running, this updates rdtp->dynticks_nmi to let the > * RCU grace-period handling know that the CPU is active. > */ > -void rcu_nmi_enter(void) > +void notrace rcu_nmi_enter(void) > { > struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); > > @@ -304,7 +304,7 @@ void rcu_nmi_enter(void) > * irq handler running, this updates rdtp->dynticks_nmi to let the > * RCU grace-period handling know that the CPU is no longer active. > */ > -void rcu_nmi_exit(void) > +void notrace rcu_nmi_exit(void) > { > struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 48+ messages in thread
end of thread, other threads:[~2010-04-06 21:17 UTC | newest]
Thread overview: 48+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-04 12:18 Random scheduler/unaligned accesses crashes with perf lock events Frederic Weisbecker
2010-04-04 12:18 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker
2010-04-04 12:21 ` Random scheduler/unaligned accesses crashes with perf lock Frederic Weisbecker
2010-04-04 12:21 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker
2010-04-05 1:00 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-05 1:00 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-05 6:57 ` Random scheduler/unaligned accesses crashes with perf lock Frederic Weisbecker
2010-04-05 6:57 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker
2010-04-05 19:22 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-05 19:22 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-05 19:40 ` Random scheduler/unaligned accesses crashes with perf lock Frederic Weisbecker
2010-04-05 19:40 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker
2010-04-05 20:46 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-05 20:46 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-06 2:15 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-06 2:15 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-06 13:41 ` Random scheduler/unaligned accesses crashes with perf lock Steven Rostedt
2010-04-06 13:41 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Steven Rostedt
2010-04-06 17:46 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-06 17:46 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-06 18:15 ` Random scheduler/unaligned accesses crashes with perf lock Steven Rostedt
2010-04-06 18:15 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Steven Rostedt
2010-04-06 21:17 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-06 21:17 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-06 9:50 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-06 9:50 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-06 10:19 ` Random scheduler/unaligned accesses crashes with perf lock Frederic Weisbecker
2010-04-06 10:19 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker
2010-04-06 10:28 ` Random scheduler/unaligned accesses crashes with perf lock David Miller
2010-04-06 10:28 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 David Miller
2010-04-06 11:12 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI Peter Zijlstra
2010-04-06 11:12 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context Peter Zijlstra
2010-04-06 11:13 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI David Miller
2010-04-06 11:13 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context David Miller
2010-04-06 11:20 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI Peter Zijlstra
2010-04-06 11:20 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context Peter Zijlstra
2010-04-06 11:22 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI David Miller
2010-04-06 11:22 ` [RFC][PATCH] lockdep: WARN about local_irq_{en,dis}able in NMI context David Miller
2010-04-06 11:38 ` Random scheduler/unaligned accesses crashes with perf lock Frederic Weisbecker
2010-04-06 11:38 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Frederic Weisbecker
2010-04-06 11:51 ` Random scheduler/unaligned accesses crashes with perf lock Peter Zijlstra
2010-04-06 11:51 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Peter Zijlstra
2010-04-06 12:54 ` Random scheduler/unaligned accesses crashes with perf lock Mike Galbraith
2010-04-06 12:54 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Mike Galbraith
2010-04-06 12:57 ` Random scheduler/unaligned accesses crashes with perf lock Peter Zijlstra
2010-04-06 12:57 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Peter Zijlstra
2010-04-06 18:04 ` Random scheduler/unaligned accesses crashes with perf lock Paul E. McKenney
2010-04-06 18:04 ` Random scheduler/unaligned accesses crashes with perf lock events on sparc 64 Paul E. McKenney
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.