From: Marcelo Tosatti <mtosatti@redhat.com>
To: kvm@vger.kernel.org, qemu-devel@nongnu.org
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Subject: [patch uq/master 2/9] make SIG_IPI to tcg vcpu thread reliable
Date: Tue, 04 May 2010 09:45:20 -0300 [thread overview]
Message-ID: <20100504124634.221277834@redhat.com> (raw)
In-Reply-To: 20100504124518.979470863@redhat.com
[-- Attachment #1: qemu-remove-signal-lock --]
[-- Type: text/plain, Size: 2517 bytes --]
Store tcg loop exit request on a global variable, and transfer it to
per-CPUState exit_request after assignment of cpu_single_env.
This makes exit request signal from robust. Drop the timedlock hack.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Index: qemu/cpu-exec.c
===================================================================
--- qemu.orig/cpu-exec.c
+++ qemu/cpu-exec.c
@@ -213,6 +213,8 @@ static void cpu_handle_debug_exception(C
/* main execution loop */
+volatile sig_atomic_t exit_request;
+
int cpu_exec(CPUState *env1)
{
volatile host_reg_t saved_env_reg;
@@ -234,6 +236,11 @@ int cpu_exec(CPUState *env1)
asm("");
env = env1;
+ if (exit_request) {
+ env->exit_request = 1;
+ exit_request = 0;
+ }
+
#if defined(TARGET_I386)
if (!kvm_enabled()) {
/* put eflags in CPU temporary format */
Index: qemu/cpus.c
===================================================================
--- qemu.orig/cpus.c
+++ qemu/cpus.c
@@ -472,6 +472,7 @@ static void cpu_signal(int sig)
{
if (cpu_single_env)
cpu_exit(cpu_single_env);
+ exit_request = 1;
}
static void tcg_block_io_signals(void)
@@ -542,26 +543,20 @@ static void unblock_io_signals(void)
pthread_sigmask(SIG_BLOCK, &set, NULL);
}
-static void qemu_signal_lock(unsigned int msecs)
-{
- qemu_mutex_lock(&qemu_fair_mutex);
-
- while (qemu_mutex_trylock(&qemu_global_mutex)) {
- qemu_thread_signal(tcg_cpu_thread, SIG_IPI);
- if (!qemu_mutex_timedlock(&qemu_global_mutex, msecs))
- break;
- }
- qemu_mutex_unlock(&qemu_fair_mutex);
-}
-
void qemu_mutex_lock_iothread(void)
{
if (kvm_enabled()) {
qemu_mutex_lock(&qemu_fair_mutex);
qemu_mutex_lock(&qemu_global_mutex);
qemu_mutex_unlock(&qemu_fair_mutex);
- } else
- qemu_signal_lock(100);
+ } else {
+ qemu_mutex_lock(&qemu_fair_mutex);
+ if (qemu_mutex_trylock(&qemu_global_mutex)) {
+ qemu_thread_signal(tcg_cpu_thread, SIG_IPI);
+ qemu_mutex_lock(&qemu_global_mutex);
+ }
+ qemu_mutex_unlock(&qemu_fair_mutex);
+ }
}
void qemu_mutex_unlock_iothread(void)
Index: qemu/exec-all.h
===================================================================
--- qemu.orig/exec-all.h
+++ qemu/exec-all.h
@@ -339,4 +339,7 @@ CPUDebugExcpHandler *cpu_set_debug_excp_
/* vl.c */
extern int singlestep;
+/* cpu-exec.c */
+extern volatile sig_atomic_t exit_request;
+
#endif
WARNING: multiple messages have this Message-ID (diff)
From: Marcelo Tosatti <mtosatti@redhat.com>
To: kvm@vger.kernel.org, qemu-devel@nongnu.org
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Subject: [Qemu-devel] [patch uq/master 2/9] make SIG_IPI to tcg vcpu thread reliable
Date: Tue, 04 May 2010 09:45:20 -0300 [thread overview]
Message-ID: <20100504124634.221277834@redhat.com> (raw)
In-Reply-To: 20100504124518.979470863@redhat.com
[-- Attachment #1: qemu-remove-signal-lock --]
[-- Type: text/plain, Size: 2515 bytes --]
Store tcg loop exit request on a global variable, and transfer it to
per-CPUState exit_request after assignment of cpu_single_env.
This makes exit request signal from robust. Drop the timedlock hack.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Index: qemu/cpu-exec.c
===================================================================
--- qemu.orig/cpu-exec.c
+++ qemu/cpu-exec.c
@@ -213,6 +213,8 @@ static void cpu_handle_debug_exception(C
/* main execution loop */
+volatile sig_atomic_t exit_request;
+
int cpu_exec(CPUState *env1)
{
volatile host_reg_t saved_env_reg;
@@ -234,6 +236,11 @@ int cpu_exec(CPUState *env1)
asm("");
env = env1;
+ if (exit_request) {
+ env->exit_request = 1;
+ exit_request = 0;
+ }
+
#if defined(TARGET_I386)
if (!kvm_enabled()) {
/* put eflags in CPU temporary format */
Index: qemu/cpus.c
===================================================================
--- qemu.orig/cpus.c
+++ qemu/cpus.c
@@ -472,6 +472,7 @@ static void cpu_signal(int sig)
{
if (cpu_single_env)
cpu_exit(cpu_single_env);
+ exit_request = 1;
}
static void tcg_block_io_signals(void)
@@ -542,26 +543,20 @@ static void unblock_io_signals(void)
pthread_sigmask(SIG_BLOCK, &set, NULL);
}
-static void qemu_signal_lock(unsigned int msecs)
-{
- qemu_mutex_lock(&qemu_fair_mutex);
-
- while (qemu_mutex_trylock(&qemu_global_mutex)) {
- qemu_thread_signal(tcg_cpu_thread, SIG_IPI);
- if (!qemu_mutex_timedlock(&qemu_global_mutex, msecs))
- break;
- }
- qemu_mutex_unlock(&qemu_fair_mutex);
-}
-
void qemu_mutex_lock_iothread(void)
{
if (kvm_enabled()) {
qemu_mutex_lock(&qemu_fair_mutex);
qemu_mutex_lock(&qemu_global_mutex);
qemu_mutex_unlock(&qemu_fair_mutex);
- } else
- qemu_signal_lock(100);
+ } else {
+ qemu_mutex_lock(&qemu_fair_mutex);
+ if (qemu_mutex_trylock(&qemu_global_mutex)) {
+ qemu_thread_signal(tcg_cpu_thread, SIG_IPI);
+ qemu_mutex_lock(&qemu_global_mutex);
+ }
+ qemu_mutex_unlock(&qemu_fair_mutex);
+ }
}
void qemu_mutex_unlock_iothread(void)
Index: qemu/exec-all.h
===================================================================
--- qemu.orig/exec-all.h
+++ qemu/exec-all.h
@@ -339,4 +339,7 @@ CPUDebugExcpHandler *cpu_set_debug_excp_
/* vl.c */
extern int singlestep;
+/* cpu-exec.c */
+extern volatile sig_atomic_t exit_request;
+
#endif
next prev parent reply other threads:[~2010-05-04 13:49 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-04 12:45 [patch uq/master 0/9] enable smp > 1 and related fixes Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-04 12:45 ` [patch uq/master 1/9] kvm: set cpu_single_env around KVM_RUN ioctl Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-04 12:45 ` Marcelo Tosatti [this message]
2010-05-04 12:45 ` [Qemu-devel] [patch uq/master 2/9] make SIG_IPI to tcg vcpu thread reliable Marcelo Tosatti
2010-05-04 12:45 ` [patch uq/master 3/9] standardize on qemu_cpu_kick for signalling cpu thread(s) Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-04 12:45 ` [patch uq/master 4/9] port qemu-kvm's on_vcpu code Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-04 12:45 ` [patch uq/master 5/9] kvm: synchronize state from cpu context Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-06 11:31 ` Avi Kivity
2010-05-06 11:31 ` [Qemu-devel] " Avi Kivity
2010-05-04 12:45 ` [patch uq/master 6/9] add cpu_is_stopped helper Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-04 12:45 ` [patch uq/master 7/9] move stop/stopped CPU_COMMON fields after area zeroed by reset Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-04 12:45 ` [patch uq/master 8/9] kvm: validate context for kvm cpu get/put operations Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-04 12:45 ` [patch uq/master 9/9] kvm: enable smp > 1 Marcelo Tosatti
2010-05-04 12:45 ` [Qemu-devel] " Marcelo Tosatti
2010-05-05 18:24 ` [patch uq/master 0/9] enable smp > 1 and related fixes Anthony Liguori
2010-05-05 18:24 ` [Qemu-devel] " Anthony Liguori
2010-05-06 11:33 ` Avi Kivity
2010-05-06 11:33 ` [Qemu-devel] " Avi Kivity
2010-05-06 11:34 ` Avi Kivity
2010-05-06 11:34 ` [Qemu-devel] " Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100504124634.221277834@redhat.com \
--to=mtosatti@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.