* [U-Boot] Support similar boards at same board file?
@ 2010-05-20 8:46 Minkyu Kang
2010-05-20 11:31 ` Stefan Roese
2010-05-20 11:43 ` Wolfgang Denk
0 siblings, 2 replies; 7+ messages in thread
From: Minkyu Kang @ 2010-05-20 8:46 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
I will post two boards "aquila" and "goni". (s5pc110 soc)
These board are very similar and can detect the board by gpio. (at runtime)
So, I want to support these two boards at same board file.
Thus, I will use same binary at two boards.
How you think?
Please give your opinion.
Thanks
Minkyu Kang
--
from. prom.
www.promsoft.net
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Support similar boards at same board file?
2010-05-20 8:46 [U-Boot] Support similar boards at same board file? Minkyu Kang
@ 2010-05-20 11:31 ` Stefan Roese
2010-05-20 11:43 ` Wolfgang Denk
1 sibling, 0 replies; 7+ messages in thread
From: Stefan Roese @ 2010-05-20 11:31 UTC (permalink / raw)
To: u-boot
Hi Minkyu,
On Thursday 20 May 2010 10:46:43 Minkyu Kang wrote:
> I will post two boards "aquila" and "goni". (s5pc110 soc)
> These board are very similar and can detect the board by gpio. (at runtime)
> So, I want to support these two boards at same board file.
> Thus, I will use same binary at two boards.
>
> How you think?
> Please give your opinion.
We usually don't want or even accept code duplications resulting from similar
boards. So I definitely prefer such a runtime detection of the board type.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Support similar boards at same board file?
2010-05-20 8:46 [U-Boot] Support similar boards at same board file? Minkyu Kang
2010-05-20 11:31 ` Stefan Roese
@ 2010-05-20 11:43 ` Wolfgang Denk
2010-05-23 13:50 ` Minkyu Kang
1 sibling, 1 reply; 7+ messages in thread
From: Wolfgang Denk @ 2010-05-20 11:43 UTC (permalink / raw)
To: u-boot
Dear Minkyu Kang,
In message <AANLkTikGitnfUE9UQZpgJW5GiTMrwylk6ASQbqQMllGc@mail.gmail.com> you wrote:
>
> I will post two boards "aquila" and "goni". (s5pc110 soc)
> These board are very similar and can detect the board by gpio. (at runtime)
> So, I want to support these two boards at same board file.
> Thus, I will use same binary at two boards.
OK.
> How you think?
> Please give your opinion.
Sorry, but I fail to see a question?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Nothing ever becomes real until it is experienced. - John Keats
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Support similar boards at same board file?
2010-05-20 11:43 ` Wolfgang Denk
@ 2010-05-23 13:50 ` Minkyu Kang
2010-05-24 20:50 ` Wolfgang Denk
0 siblings, 1 reply; 7+ messages in thread
From: Minkyu Kang @ 2010-05-23 13:50 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
On 20 May 2010 20:43, Wolfgang Denk <wd@denx.de> wrote:
> Dear Minkyu Kang,
>
> In message <AANLkTikGitnfUE9UQZpgJW5GiTMrwylk6ASQbqQMllGc@mail.gmail.com> you wrote:
>>
>> I will post two boards "aquila" and "goni". (s5pc110 soc)
>> These board are very similar and can detect the board by gpio. (at runtime)
>> So, I want to support these two boards at same board file.
>> Thus, I will use same binary at two boards.
>
> OK.
>
>> How you think?
>> Please give your opinion.
>
> Sorry, but I fail to see a question?
>
Question...
How I can configure the board directory?
board/samsung/aquila or board/samsung/goni?
or need another naming for two boards?
Thanks
Minkyu Kang
--
from. prom.
www.promsoft.net
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Support similar boards at same board file?
2010-05-23 13:50 ` Minkyu Kang
@ 2010-05-24 20:50 ` Wolfgang Denk
2010-05-25 3:37 ` Minkyu Kang
0 siblings, 1 reply; 7+ messages in thread
From: Wolfgang Denk @ 2010-05-24 20:50 UTC (permalink / raw)
To: u-boot
Dear Minkyu Kang,
In message <AANLkTinxDyzb6NiN8KBFl9V_lmu7mW0G8Kv-c6qgAc6f@mail.gmail.com> you wrote:
>
> >> I will post two boards "aquila" and "goni". (s5pc110 soc)
> >> These board are very similar and can detect the board by gpio. (at runtime)
> >> So, I want to support these two boards at same board file.
> >> Thus, I will use same binary at two boards.
...
>
> Question...
> How I can configure the board directory?
> board/samsung/aquila or board/samsung/goni?
> or need another naming for two boards?
Use either name (but don't invent a third one). Which one to use -
that's your choice. I cannot answer this. If one of the two boards is
more general or more popular than the other, then use this one.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If anything can go wrong, it will." - Edsel Murphy
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Support similar boards at same board file?
2010-05-24 20:50 ` Wolfgang Denk
@ 2010-05-25 3:37 ` Minkyu Kang
2010-05-25 6:58 ` Kyungmin Park
0 siblings, 1 reply; 7+ messages in thread
From: Minkyu Kang @ 2010-05-25 3:37 UTC (permalink / raw)
To: u-boot
Dear Wolfgang Denk,
On 25 May 2010 05:50, Wolfgang Denk <wd@denx.de> wrote:
> Dear Minkyu Kang,
>
> In message <AANLkTinxDyzb6NiN8KBFl9V_lmu7mW0G8Kv-c6qgAc6f@mail.gmail.com> you wrote:
>>
>> >> I will post two boards "aquila" and "goni". (s5pc110 soc)
>> >> These board are very similar and can detect the board by gpio. (at runtime)
>> >> So, I want to support these two boards at same board file.
>> >> Thus, I will use same binary at two boards.
> ...
>>
>> Question...
>> How I can configure the board directory?
>> board/samsung/aquila or board/samsung/goni?
>> or need another naming for two boards?
>
> Use either name (but don't invent a third one). Which one to use -
> that's your choice. I cannot answer this. If one of the two boards is
> more general or more popular than the other, then use this one.
OK.
Thanks.
Minkyu Kang
--
from. prom.
www.promsoft.net
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Support similar boards at same board file?
2010-05-25 3:37 ` Minkyu Kang
@ 2010-05-25 6:58 ` Kyungmin Park
0 siblings, 0 replies; 7+ messages in thread
From: Kyungmin Park @ 2010-05-25 6:58 UTC (permalink / raw)
To: u-boot
Hi,
My bet is goni. Since it's new GPIO based board.
Thank you,
Kyungmin Park
> -----Original Message-----
> From: Minkyu Kang [mailto:promsoft at gmail.com]
> Sent: Tuesday, May 25, 2010 12:38 PM
> To: Wolfgang Denk
> Cc: u-boot at lists.denx.de; ???
> Subject: Re: Support similar boards at same board file?
>
> Dear Wolfgang Denk,
>
> On 25 May 2010 05:50, Wolfgang Denk <wd@denx.de> wrote:
> > Dear Minkyu Kang,
> >
> > In message <AANLkTinxDyzb6NiN8KBFl9V_lmu7mW0G8Kv-
> c6qgAc6f at mail.gmail.com> you wrote:
> >>
> >> >> I will post two boards "aquila" and "goni". (s5pc110 soc)
> >> >> These board are very similar and can detect the board by gpio. (at
> runtime)
> >> >> So, I want to support these two boards at same board file.
> >> >> Thus, I will use same binary at two boards.
> > ...
> >>
> >> Question...
> >> How I can configure the board directory?
> >> board/samsung/aquila or board/samsung/goni?
> >> or need another naming for two boards?
> >
> > Use either name (but don't invent a third one). Which one to use -
> > that's your choice. I cannot answer this. If one of the two boards is
> > more general or more popular than the other, then use this one.
>
> OK.
> Thanks.
>
> Minkyu Kang
> --
> from. prom.
> www.promsoft.net
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-05-25 6:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-20 8:46 [U-Boot] Support similar boards at same board file? Minkyu Kang
2010-05-20 11:31 ` Stefan Roese
2010-05-20 11:43 ` Wolfgang Denk
2010-05-23 13:50 ` Minkyu Kang
2010-05-24 20:50 ` Wolfgang Denk
2010-05-25 3:37 ` Minkyu Kang
2010-05-25 6:58 ` Kyungmin Park
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.