[Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

Certain architectures (such as PowerPC Book III S) have a need to cleanup
data-structures before the breakpoint is unregistered. This patch introduces
an arch-specific hook in release_bp_slot() along with a weak definition in
the form of a stub funciton.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
 kernel/hw_breakpoint.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: linux-2.6.ppc64_test/kernel/hw_breakpoint.c
===================================================================
--- linux-2.6.ppc64_test.orig/kernel/hw_breakpoint.c
+++ linux-2.6.ppc64_test/kernel/hw_breakpoint.c
@@ -242,6 +242,17 @@ toggle_bp_slot(struct perf_event *bp, bo
 }
 
 /*
+ * Function to perform processor-specific cleanup during unregistration
+ */
+__weak void arch_unregister_hw_breakpoint(struct perf_event *bp)
+{
+	/*
+	 * A weak stub function here for those archs that don't define
+	 * it inside arch/.../kernel/hw_breakpoint.c
+	 */
+}
+
+/*
  * Contraints to check before allowing this new breakpoint counter:
  *
  *  == Non-pinned counter == (Considered as pinned for now)
@@ -339,6 +350,7 @@ void release_bp_slot(struct perf_event *
 {
 	mutex_lock(&nr_bp_mutex);
 
+	arch_unregister_hw_breakpoint(bp);
 	__release_bp_slot(bp);
 
 	mutex_unlock(&nr_bp_mutex);

[Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

[-- Attachment #1: arch_unregister_hbp_02 --]
[-- Type: text/plain, Size: 1284 bytes --]

Certain architectures (such as PowerPC Book III S) have a need to cleanup
data-structures before the breakpoint is unregistered. This patch introduces
an arch-specific hook in release_bp_slot() along with a weak definition in
the form of a stub funciton.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
 kernel/hw_breakpoint.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: linux-2.6.ppc64_test/kernel/hw_breakpoint.c
===================================================================
--- linux-2.6.ppc64_test.orig/kernel/hw_breakpoint.c
+++ linux-2.6.ppc64_test/kernel/hw_breakpoint.c
@@ -242,6 +242,17 @@ toggle_bp_slot(struct perf_event *bp, bo
 }
 
 /*
+ * Function to perform processor-specific cleanup during unregistration
+ */
+__weak void arch_unregister_hw_breakpoint(struct perf_event *bp)
+{
+	/*
+	 * A weak stub function here for those archs that don't define
+	 * it inside arch/.../kernel/hw_breakpoint.c
+	 */
+}
+
+/*
  * Contraints to check before allowing this new breakpoint counter:
  *
  *  == Non-pinned counter == (Considered as pinned for now)
@@ -339,6 +350,7 @@ void release_bp_slot(struct perf_event *
 {
 	mutex_lock(&nr_bp_mutex);
 
+	arch_unregister_hw_breakpoint(bp);
 	__release_bp_slot(bp);
 
 	mutex_unlock(&nr_bp_mutex);

[Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Millton Miller]

On Tue, 25 May 2010 at 14:43:56 +0530, K.Prasad wrote:
> Certain architectures (such as PowerPC Book III S) have a need to cleanup
> data-structures before the breakpoint is unregistered. This patch introduces
> an arch-specific hook in release_bp_slot() along with a weak definition in
> the form of a stub funciton.
> 
> Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
> ---
>  kernel/hw_breakpoint.c |   12 ++++++++++++
>  1 file changed, 12 insertions(+)


My understanding is weak function definitions must appear in a different C
file than their call sites to work on some toolchains.

Andrew, can you confirm the above statement?

> Index: linux-2.6.ppc64_test/kernel/hw_breakpoint.c
> ===================================================================
> --- linux-2.6.ppc64_test.orig/kernel/hw_breakpoint.c
> +++ linux-2.6.ppc64_test/kernel/hw_breakpoint.c
> @@ -242,6 +242,17 @@  toggle_bp_slot(struct perf_event *bp, bo
>  }
>  
>  /*
> + * Function to perform processor-specific cleanup during unregistration
> + */
> +__weak void arch_unregister_hw_breakpoint(struct perf_event *bp)
> +{
> +	/*
> +	 * A weak stub function here for those archs that don't define
> +	 * it inside arch/.../kernel/hw_breakpoint.c
> +	 */
> +}
> +
> +/*
>   * Contraints to check before allowing this new breakpoint counter:
>   *
>   *  == Non-pinned counter == (Considered as pinned for now)
> @@ -339,6 +350,7 @@  void release_bp_slot(struct perf_event *
>  {
>  	mutex_lock(&nr_bp_mutex);
>  
> +	arch_unregister_hw_breakpoint(bp);
>  	__release_bp_slot(bp);
>  
>  	mutex_unlock(&nr_bp_mutex);
> 


Since the weak version is empty, should it just be delcared (in
a header, put the comment there) and not defined?

milton

[Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Millton Miller]

On Tue, 25 May 2010 at 14:43:56 +0530, K.Prasad wrote:
> Certain architectures (such as PowerPC Book III S) have a need to cleanup
> data-structures before the breakpoint is unregistered. This patch introduces
> an arch-specific hook in release_bp_slot() along with a weak definition in
> the form of a stub funciton.
> 
> Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
> ---
>  kernel/hw_breakpoint.c |   12 ++++++++++++
>  1 file changed, 12 insertions(+)


My understanding is weak function definitions must appear in a different C
file than their call sites to work on some toolchains.

Andrew, can you confirm the above statement?

> Index: linux-2.6.ppc64_test/kernel/hw_breakpoint.c
> ===================================================================
> --- linux-2.6.ppc64_test.orig/kernel/hw_breakpoint.c
> +++ linux-2.6.ppc64_test/kernel/hw_breakpoint.c
> @@ -242,6 +242,17 @@  toggle_bp_slot(struct perf_event *bp, bo
>  }
>  
>  /*
> + * Function to perform processor-specific cleanup during unregistration
> + */
> +__weak void arch_unregister_hw_breakpoint(struct perf_event *bp)
> +{
> +	/*
> +	 * A weak stub function here for those archs that don't define
> +	 * it inside arch/.../kernel/hw_breakpoint.c
> +	 */
> +}
> +
> +/*
>   * Contraints to check before allowing this new breakpoint counter:
>   *
>   *  == Non-pinned counter == (Considered as pinned for now)
> @@ -339,6 +350,7 @@  void release_bp_slot(struct perf_event *
>  {
>  	mutex_lock(&nr_bp_mutex);
>  
> +	arch_unregister_hw_breakpoint(bp);
>  	__release_bp_slot(bp);
>  
>  	mutex_unlock(&nr_bp_mutex);
> 


Since the weak version is empty, should it just be delcared (in
a header, put the comment there) and not defined?

milton

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

On Tue, May 25, 2010 at 06:39:19AM -0500, Millton Miller wrote:
> On Tue, 25 May 2010 at 14:43:56 +0530, K.Prasad wrote:
> > Certain architectures (such as PowerPC Book III S) have a need to cleanup
> > data-structures before the breakpoint is unregistered. This patch introduces
> > an arch-specific hook in release_bp_slot() along with a weak definition in
> > the form of a stub funciton.
> > 
> > Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
> > ---
> >  kernel/hw_breakpoint.c |   12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> 
> 
> My understanding is weak function definitions must appear in a different C
> file than their call sites to work on some toolchains.
> 

Atleast, there are quite a few precedents inside the Linux kernel for
__weak functions being invoked from the file in which they are defined
(arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
name a few).
Moreover the online GCC docs haven't any such constraints mentioned.

> Andrew, can you confirm the above statement?
> 
> > Index: linux-2.6.ppc64_test/kernel/hw_breakpoint.c
> > ===================================================================
> > --- linux-2.6.ppc64_test.orig/kernel/hw_breakpoint.c
> > +++ linux-2.6.ppc64_test/kernel/hw_breakpoint.c
> > @@ -242,6 +242,17 @@  toggle_bp_slot(struct perf_event *bp, bo
> >  }
> >  
> >  /*
> > + * Function to perform processor-specific cleanup during unregistration
> > + */
> > +__weak void arch_unregister_hw_breakpoint(struct perf_event *bp)
> > +{
> > +	/*
> > +	 * A weak stub function here for those archs that don't define
> > +	 * it inside arch/.../kernel/hw_breakpoint.c
> > +	 */
> > +}
> > +
> > +/*
> >   * Contraints to check before allowing this new breakpoint counter:
> >   *
> >   *  == Non-pinned counter == (Considered as pinned for now)
> > @@ -339,6 +350,7 @@  void release_bp_slot(struct perf_event *
> >  {
> >  	mutex_lock(&nr_bp_mutex);
> >  
> > +	arch_unregister_hw_breakpoint(bp);
> >  	__release_bp_slot(bp);
> >  
> >  	mutex_unlock(&nr_bp_mutex);
> > 
> 
> 
> Since the weak version is empty, should it just be delcared (in
> a header, put the comment there) and not defined?
>

The initial thinking behind defining it in the .c file was, for one,
the function need not be moved (from .h to .c) when other architectures
have a need to populate them. Secondly, given that powerpc (which has a
'strong' definition for arch_unregister_hw_breakpoint()) includes the
header file (in which this can be moved to) I wasn't sure about
possible conflicts.

> milton
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

Thanks,
K.Prasad

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[David Howells]

K.Prasad <prasad@linux.vnet.ibm.com> wrote:

> > My understanding is weak function definitions must appear in a different C
> > file than their call sites to work on some toolchains.
> > 
> 
> Atleast, there are quite a few precedents inside the Linux kernel for
> __weak functions being invoked from the file in which they are defined
> (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> name a few).
> Moreover the online GCC docs haven't any such constraints mentioned.

I've seen problems in this area.  gcc sometimes inlines a weak function that's
in the same file as the call point.

David

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[David Howells]

K.Prasad <prasad@linux.vnet.ibm.com> wrote:

> > My understanding is weak function definitions must appear in a different C
> > file than their call sites to work on some toolchains.
> > 
> 
> Atleast, there are quite a few precedents inside the Linux kernel for
> __weak functions being invoked from the file in which they are defined
> (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> name a few).
> Moreover the online GCC docs haven't any such constraints mentioned.

I've seen problems in this area.  gcc sometimes inlines a weak function that's
in the same file as the call point.

David

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Michael Ellerman]

[-- Attachment #1: Type: text/plain, Size: 1259 bytes --]

On Wed, 2010-05-26 at 10:54 +0100, David Howells wrote:
> K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> 
> > > My understanding is weak function definitions must appear in a different C
> > > file than their call sites to work on some toolchains.
> > > 
> > 
> > Atleast, there are quite a few precedents inside the Linux kernel for
> > __weak functions being invoked from the file in which they are defined
> > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > name a few).
> > Moreover the online GCC docs haven't any such constraints mentioned.
> 
> I've seen problems in this area.  gcc sometimes inlines a weak function that's
> in the same file as the call point.

See the functions in kernel/softirq.c for example, and commits 43a256322
and b2e2fe996 - though unhelpfully they don't mention the gcc version. A
bit of googling suggests it was probably "gcc version 4.1.1 20060525
(Red Hat 4.1.1-1)" in that case.

But the example of hw_perf_enable() (which is weak in the same unit),
suggests maybe this isn't a bug many people are hitting in practice
anymore.

Having said that the #define foo foo pattern is reasonably neat and
avoids the problem altogether, see eg. arch_setup_msi_irqs.

cheers

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Michael Ellerman]

[-- Attachment #1: Type: text/plain, Size: 1259 bytes --]

On Wed, 2010-05-26 at 10:54 +0100, David Howells wrote:
> K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> 
> > > My understanding is weak function definitions must appear in a different C
> > > file than their call sites to work on some toolchains.
> > > 
> > 
> > Atleast, there are quite a few precedents inside the Linux kernel for
> > __weak functions being invoked from the file in which they are defined
> > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > name a few).
> > Moreover the online GCC docs haven't any such constraints mentioned.
> 
> I've seen problems in this area.  gcc sometimes inlines a weak function that's
> in the same file as the call point.

See the functions in kernel/softirq.c for example, and commits 43a256322
and b2e2fe996 - though unhelpfully they don't mention the gcc version. A
bit of googling suggests it was probably "gcc version 4.1.1 20060525
(Red Hat 4.1.1-1)" in that case.

But the example of hw_perf_enable() (which is weak in the same unit),
suggests maybe this isn't a bug many people are hitting in practice
anymore.

Having said that the #define foo foo pattern is reasonably neat and
avoids the problem altogether, see eg. arch_setup_msi_irqs.

cheers

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> 
> > > My understanding is weak function definitions must appear in a different C
> > > file than their call sites to work on some toolchains.
> > > 
> > 
> > Atleast, there are quite a few precedents inside the Linux kernel for
> > __weak functions being invoked from the file in which they are defined
> > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > name a few).
> > Moreover the online GCC docs haven't any such constraints mentioned.
> 
> I've seen problems in this area.  gcc sometimes inlines a weak function that's
> in the same file as the call point.
> 

We've seen such behaviour even otherwise....even with noinline attribute
in place. I'm not sure if this gcc fix
(http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the
behaviour, but the lesson has been to not trust a function to be
inlined/remain non-inline consistently.

> David

Thanks,
K.Prasad

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> 
> > > My understanding is weak function definitions must appear in a different C
> > > file than their call sites to work on some toolchains.
> > > 
> > 
> > Atleast, there are quite a few precedents inside the Linux kernel for
> > __weak functions being invoked from the file in which they are defined
> > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > name a few).
> > Moreover the online GCC docs haven't any such constraints mentioned.
> 
> I've seen problems in this area.  gcc sometimes inlines a weak function that's
> in the same file as the call point.
> 

We've seen such behaviour even otherwise....even with noinline attribute
in place. I'm not sure if this gcc fix
(http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the
behaviour, but the lesson has been to not trust a function to be
inlined/remain non-inline consistently.

> David

Thanks,
K.Prasad

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Frederic Weisbecker]

On Wed, May 26, 2010 at 10:47:42PM +0530, K.Prasad wrote:
> On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> > K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> > 
> > > > My understanding is weak function definitions must appear in a different C
> > > > file than their call sites to work on some toolchains.
> > > > 
> > > 
> > > Atleast, there are quite a few precedents inside the Linux kernel for
> > > __weak functions being invoked from the file in which they are defined
> > > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > > name a few).
> > > Moreover the online GCC docs haven't any such constraints mentioned.
> > 
> > I've seen problems in this area.  gcc sometimes inlines a weak function that's
> > in the same file as the call point.
> > 
> 
> We've seen such behaviour even otherwise....even with noinline attribute
> in place. I'm not sure if this gcc fix
> (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the
> behaviour, but the lesson has been to not trust a function to be
> inlined/remain non-inline consistently.


If we can't put the call to the function in the same file of its weak
definition, then perf is totally screwed.

And in fact it makes __weak basically useless and unusable. I guess
that happened in old gcc versions that have been fixed now.

Anyway, I'm personally fine with this patch (you can put my hack
if you want).

Thanks.

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Frederic Weisbecker]

On Wed, May 26, 2010 at 10:47:42PM +0530, K.Prasad wrote:
> On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> > K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> > 
> > > > My understanding is weak function definitions must appear in a different C
> > > > file than their call sites to work on some toolchains.
> > > > 
> > > 
> > > Atleast, there are quite a few precedents inside the Linux kernel for
> > > __weak functions being invoked from the file in which they are defined
> > > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > > name a few).
> > > Moreover the online GCC docs haven't any such constraints mentioned.
> > 
> > I've seen problems in this area.  gcc sometimes inlines a weak function that's
> > in the same file as the call point.
> > 
> 
> We've seen such behaviour even otherwise....even with noinline attribute
> in place. I'm not sure if this gcc fix
> (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the
> behaviour, but the lesson has been to not trust a function to be
> inlined/remain non-inline consistently.


If we can't put the call to the function in the same file of its weak
definition, then perf is totally screwed.

And in fact it makes __weak basically useless and unusable. I guess
that happened in old gcc versions that have been fixed now.

Anyway, I'm personally fine with this patch (you can put my hack
if you want).

Thanks.

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

On Wed, May 26, 2010 at 07:23:15PM +0200, Frederic Weisbecker wrote:
> On Wed, May 26, 2010 at 10:47:42PM +0530, K.Prasad wrote:
> > On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> > > K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> > > 
> > > > > My understanding is weak function definitions must appear in a different C
> > > > > file than their call sites to work on some toolchains.
> > > > > 
> > > > 
> > > > Atleast, there are quite a few precedents inside the Linux kernel for
> > > > __weak functions being invoked from the file in which they are defined
> > > > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > > > name a few).
> > > > Moreover the online GCC docs haven't any such constraints mentioned.
> > > 
> > > I've seen problems in this area.  gcc sometimes inlines a weak function that's
> > > in the same file as the call point.
> > > 
> > 
> > We've seen such behaviour even otherwise....even with noinline attribute
> > in place. I'm not sure if this gcc fix
> > (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the
> > behaviour, but the lesson has been to not trust a function to be
> > inlined/remain non-inline consistently.
> 
> 
> If we can't put the call to the function in the same file of its weak
> definition, then perf is totally screwed.
> 
> And in fact it makes __weak basically useless and unusable. I guess
> that happened in old gcc versions that have been fixed now.
> 
> Anyway, I'm personally fine with this patch (you can put my hack
> if you want).
>

I guess you meant "Acked-by:" :-)

Thanks, I'll add the same.

--K.Prasad
 

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[Frederic Weisbecker]

On Wed, May 26, 2010 at 11:01:24PM +0530, K.Prasad wrote:
> On Wed, May 26, 2010 at 07:23:15PM +0200, Frederic Weisbecker wrote:
> > On Wed, May 26, 2010 at 10:47:42PM +0530, K.Prasad wrote:
> > > On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> > > > K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> > > > 
> > > > > > My understanding is weak function definitions must appear in a different C
> > > > > > file than their call sites to work on some toolchains.
> > > > > > 
> > > > > 
> > > > > Atleast, there are quite a few precedents inside the Linux kernel for
> > > > > __weak functions being invoked from the file in which they are defined
> > > > > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > > > > name a few).
> > > > > Moreover the online GCC docs haven't any such constraints mentioned.
> > > > 
> > > > I've seen problems in this area.  gcc sometimes inlines a weak function that's
> > > > in the same file as the call point.
> > > > 
> > > 
> > > We've seen such behaviour even otherwise....even with noinline attribute
> > > in place. I'm not sure if this gcc fix
> > > (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the
> > > behaviour, but the lesson has been to not trust a function to be
> > > inlined/remain non-inline consistently.
> > 
> > 
> > If we can't put the call to the function in the same file of its weak
> > definition, then perf is totally screwed.
> > 
> > And in fact it makes __weak basically useless and unusable. I guess
> > that happened in old gcc versions that have been fixed now.
> > 
> > Anyway, I'm personally fine with this patch (you can put my hack
> > if you want).
> >
> 
> I guess you meant "Acked-by:" :-)



Oops, right :)

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

On Wed, May 26, 2010 at 10:47:42PM +0530, K.Prasad wrote:
> On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> > K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> > 
> > > > My understanding is weak function definitions must appear in a different C
> > > > file than their call sites to work on some toolchains.
> > > > 
> > > 
> > > Atleast, there are quite a few precedents inside the Linux kernel for
> > > __weak functions being invoked from the file in which they are defined
> > > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > > name a few).
> > > Moreover the online GCC docs haven't any such constraints mentioned.
> > 
> > I've seen problems in this area.  gcc sometimes inlines a weak function that's
> > in the same file as the call point.
> > 
> 
> We've seen such behaviour even otherwise....even with noinline attribute
> in place. I'm not sure if this gcc fix
> (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the

Looks like I cited the wrong bug. The appropriate one is
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34563.

Thanks,
K.Prasad

Re: [Patch 1/4] Allow arch-specific cleanup before breakpoint unregistration

[K.Prasad]

On Wed, May 26, 2010 at 10:47:42PM +0530, K.Prasad wrote:
> On Wed, May 26, 2010 at 10:54:41AM +0100, David Howells wrote:
> > K.Prasad <prasad@linux.vnet.ibm.com> wrote:
> > 
> > > > My understanding is weak function definitions must appear in a different C
> > > > file than their call sites to work on some toolchains.
> > > > 
> > > 
> > > Atleast, there are quite a few precedents inside the Linux kernel for
> > > __weak functions being invoked from the file in which they are defined
> > > (arch_hwblk_init, arch_enable_nonboot_cpus_begin and hw_perf_disable to
> > > name a few).
> > > Moreover the online GCC docs haven't any such constraints mentioned.
> > 
> > I've seen problems in this area.  gcc sometimes inlines a weak function that's
> > in the same file as the call point.
> > 
> 
> We've seen such behaviour even otherwise....even with noinline attribute
> in place. I'm not sure if this gcc fix
> (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16922) helped correct the

Looks like I cited the wrong bug. The appropriate one is
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34563.

Thanks,
K.Prasad

[Patch 2/4] PPC64-HWBKPT: Implement hw-breakpoints for PowerPC BookIII S

[K.Prasad]

Implement perf-events based hw-breakpoint interfaces for PowerPC Book III S
processors. These interfaces help arbitrate requests from various users and
schedules them as appropriate.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
 arch/powerpc/Kconfig                     |    1 
 arch/powerpc/include/asm/cputable.h      |    4 
 arch/powerpc/include/asm/hw_breakpoint.h |   73 ++++++
 arch/powerpc/include/asm/processor.h     |    8 
 arch/powerpc/kernel/Makefile             |    1 
 arch/powerpc/kernel/hw_breakpoint.c      |  338 +++++++++++++++++++++++++++++++
 arch/powerpc/kernel/machine_kexec_64.c   |    3 
 arch/powerpc/kernel/process.c            |    6 
 arch/powerpc/kernel/ptrace.c             |   64 +++++
 arch/powerpc/lib/Makefile                |    1 
 10 files changed, 499 insertions(+)

Index: linux-2.6.ppc64_test/arch/powerpc/include/asm/hw_breakpoint.h
===================================================================
--- /dev/null
+++ linux-2.6.ppc64_test/arch/powerpc/include/asm/hw_breakpoint.h
@@ -0,0 +1,73 @@
+/*
+ * PowerPC BookIII S hardware breakpoint definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright 2010, IBM Corporation.
+ * Author: K.Prasad <prasad@linux.vnet.ibm.com>
+ *
+ */
+
+#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
+#define _PPC_BOOK3S_64_HW_BREAKPOINT_H
+
+#ifdef	__KERNEL__
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+struct arch_hw_breakpoint {
+	u8		len; /* length of the target data symbol */
+	int		type;
+	unsigned long	address;
+};
+
+#include <linux/kdebug.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+
+static inline int hw_breakpoint_slots(int type)
+{
+	return HBP_NUM;
+}
+struct perf_event;
+struct pmu;
+struct perf_sample_data;
+
+#define HW_BREAKPOINT_ALIGN 0x7
+/* Maximum permissible length of any HW Breakpoint */
+#define HW_BREAKPOINT_LEN 0x8
+
+extern int arch_bp_generic_fields(int type, int *gen_bp_type);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+						unsigned long val, void *data);
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+extern struct pmu perf_ops_bp;
+extern void ptrace_triggered(struct perf_event *bp, int nmi,
+			struct perf_sample_data *data, struct pt_regs *regs);
+static inline void hw_breakpoint_disable(void)
+{
+	set_dabr(0);
+}
+
+#else	/* CONFIG_HAVE_HW_BREAKPOINT */
+static inline void hw_breakpoint_disable(void) { }
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+#endif	/* __KERNEL__ */
+#endif	/* _PPC_BOOK3S_64_HW_BREAKPOINT_H */
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/hw_breakpoint.c
===================================================================
--- /dev/null
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/hw_breakpoint.c
@@ -0,0 +1,338 @@
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers. Derived from
+ * "arch/x86/kernel/hw_breakpoint.c"
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright 2010 IBM Corporation
+ * Author: K.Prasad <prasad@linux.vnet.ibm.com>
+ *
+ */
+
+#include <linux/hw_breakpoint.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/percpu.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/hw_breakpoint.h>
+#include <asm/processor.h>
+#include <asm/sstep.h>
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for every cpu
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg);
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free debug address register and use it for this
+ * breakpoint.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot = &__get_cpu_var(bp_per_reg);
+
+	*slot = bp;
+
+	/*
+	 * Do not install DABR values if the instruction must be single-stepped.
+	 * If so, DABR will be populated in single_step_dabr_instruction().
+	 */
+	if (current->thread.last_hit_ubp != bp)
+		set_dabr(info->address | info->type | DABR_TRANSLATION);
+
+	return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct perf_event **slot = &__get_cpu_var(bp_per_reg);
+
+	if (*slot != bp) {
+		WARN_ONCE(1, "Can't find the breakpoint");
+		return;
+	}
+
+	*slot = NULL;
+	set_dabr(0);
+}
+
+/*
+ * Perform cleanup of arch-specific counters during unregistration
+ * of the perf-event
+ */
+void arch_unregister_hw_breakpoint(struct perf_event *bp)
+{
+	/*
+	 * If the breakpoint is unregistered between a hw_breakpoint_handler()
+	 * and the single_step_dabr_instruction(), then cleanup the breakpoint
+	 * restoration variables to prevent dangling pointers.
+	 */
+	if (bp->ctx->task)
+		bp->ctx->task->thread.last_hit_ubp = NULL;
+
+	put_cpu();
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	return is_kernel_addr(info->address);
+}
+
+int arch_bp_generic_fields(int type, int *gen_bp_type)
+{
+	switch (type) {
+	case DABR_DATA_READ:
+		*gen_bp_type = HW_BREAKPOINT_R;
+		break;
+	case DABR_DATA_WRITE:
+		*gen_bp_type = HW_BREAKPOINT_W;
+		break;
+	case (DABR_DATA_WRITE | DABR_DATA_READ):
+		*gen_bp_type = (HW_BREAKPOINT_W | HW_BREAKPOINT_R);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	int ret = -EINVAL;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	if (!bp)
+		return ret;
+
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_R:
+		info->type = DABR_DATA_READ;
+		break;
+	case HW_BREAKPOINT_W:
+		info->type = DABR_DATA_WRITE;
+		break;
+	case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
+		info->type = (DABR_DATA_READ | DABR_DATA_WRITE);
+		break;
+	default:
+		return ret;
+	}
+
+	info->address = bp->attr.bp_addr;
+	info->len = bp->attr.bp_len;
+
+	/*
+	 * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8)
+	 * and breakpoint addresses are aligned to nearest double-word
+	 * HW_BREAKPOINT_ALIGN by rounding off to the lower address, the
+	 * 'symbolsize' should satisfy the check below.
+	 */
+	if (info->len >
+	    (HW_BREAKPOINT_LEN - (info->address & HW_BREAKPOINT_ALIGN)))
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+	bool is_ptrace_bp = false;
+	int rc = NOTIFY_STOP;
+	struct perf_event *bp;
+	struct pt_regs *regs = args->regs;
+	unsigned long dar = regs->dar;
+	int stepped = 1;
+	struct arch_hw_breakpoint *info;
+
+	/* Disable breakpoints during exception handling */
+	set_dabr(0);
+	/*
+	 * The counter may be concurrently released but that can only
+	 * occur from a call_rcu() path. We can then safely fetch
+	 * the breakpoint, use its callback, touch its counter
+	 * while we are in an rcu_read_lock() path.
+	 */
+	rcu_read_lock();
+
+	bp = __get_cpu_var(bp_per_reg);
+	if (!bp)
+		goto out;
+	info = counter_arch_bp(bp);
+	is_ptrace_bp = (bp->overflow_handler == ptrace_triggered) ?
+			true : false;
+
+	/*
+	 * Verify if dar lies within the address range occupied by the symbol
+	 * being watched to filter extraneous exceptions.
+	 */
+	if (!((bp->attr.bp_addr <= dar) &&
+	    (dar <= (bp->attr.bp_addr + bp->attr.bp_len))) &&
+	    (!is_ptrace_bp))
+		/*
+		 * This exception is triggered not because of a memory access on
+		 * the monitored variable but in the double-word address range
+		 * in which it is contained. We will consume this exception,
+		 * considering it as 'noise'.
+		 */
+		goto restore_bp;
+
+	/*
+	 * Return early after invoking user-callback function without restoring
+	 * DABR if the breakpoint is from ptrace which always operates in
+	 * one-shot mode. The ptrace-ed process will receive the SIGTRAP signal
+	 * generated in do_dabr().
+	 */
+	if (is_ptrace_bp) {
+		perf_bp_event(bp, regs);
+		rc = NOTIFY_DONE;
+		goto out;
+	}
+
+	/* Do not emulate user-space instructions, instead single-step them */
+	if (user_mode(regs)) {
+		bp->ctx->task->thread.last_hit_ubp = bp;
+		regs->msr |= MSR_SE;
+		goto out;
+	}
+
+	stepped = emulate_step(regs, regs->nip);
+	/*
+	 * emulate_step() could not execute it. We've failed in reliably
+	 * handling the hw-breakpoint. Unregister it and throw a warning
+	 * message to let the user know about it.
+	 */
+	if (!stepped) {
+		WARN(1, "Unable to handle hardware breakpoint. Breakpoint at "
+			"0x%lx will be uninstalled.", info->address);
+		unregister_hw_breakpoint(bp);
+		goto out;
+	}
+	/*
+	 * As a policy, the callback is invoked in a 'trigger-after-execute'
+	 * fashion
+	 */
+	perf_bp_event(bp, regs);
+
+restore_bp:
+	set_dabr(info->address | info->type | DABR_TRANSLATION);
+out:
+	rcu_read_unlock();
+	return rc;
+}
+
+/*
+ * Handle single-step exceptions following a DABR hit.
+ */
+int __kprobes single_step_dabr_instruction(struct die_args *args)
+{
+	struct pt_regs *regs = args->regs;
+	struct perf_event *bp = NULL;
+	struct arch_hw_breakpoint *bp_info;
+
+	bp = current->thread.last_hit_ubp;
+	/*
+	 * Check if we are single-stepping as a result of a
+	 * previous HW Breakpoint exception
+	 */
+	if (!bp)
+		return NOTIFY_DONE;
+
+	bp_info = counter_arch_bp(bp);
+
+	/*
+	 * We shall invoke the user-defined callback function in the single
+	 * stepping handler to confirm to 'trigger-after-execute' semantics
+	 */
+	perf_bp_event(bp, regs);
+
+	/*
+	 * Do not disable MSR_SE if the process was already in
+	 * single-stepping mode.
+	 */
+	if (!test_thread_flag(TIF_SINGLESTEP))
+		regs->msr &= ~MSR_SE;
+
+	set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION);
+	return NOTIFY_STOP;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(
+		struct notifier_block *unused, unsigned long val, void *data)
+{
+	int ret = NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_DABR_MATCH:
+		ret = hw_breakpoint_handler(data);
+		break;
+	case DIE_SSTEP:
+		ret = single_step_dabr_instruction(data);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	struct thread_struct *t = &tsk->thread;
+
+	unregister_hw_breakpoint(t->ptrace_bps[0]);
+	t->ptrace_bps[0] = NULL;
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+	/* TODO */
+}
+
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/Makefile
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/Makefile
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/Makefile
@@ -34,6 +34,7 @@ obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
 				   paca.o nvram_64.o firmware.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o
Index: linux-2.6.ppc64_test/arch/powerpc/include/asm/processor.h
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/include/asm/processor.h
+++ linux-2.6.ppc64_test/arch/powerpc/include/asm/processor.h
@@ -209,6 +209,14 @@ struct thread_struct {
 #ifdef CONFIG_PPC64
 	unsigned long	start_tb;	/* Start purr when proc switched in */
 	unsigned long	accum_tb;	/* Total accumilated purr for process */
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	struct perf_event *ptrace_bps[HBP_NUM];
+	/*
+	 * Helps identify source of single-step exception and subsequent
+	 * hw-breakpoint enablement
+	 */
+	struct perf_event *last_hit_ubp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
 	unsigned long	dabr;		/* Data address breakpoint register */
 #ifdef CONFIG_ALTIVEC
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/ptrace.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/ptrace.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/ptrace.c
@@ -32,6 +32,8 @@
 #ifdef CONFIG_PPC32
 #include <linux/module.h>
 #endif
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -866,9 +868,34 @@ void user_disable_single_step(struct tas
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+void ptrace_triggered(struct perf_event *bp, int nmi,
+		      struct perf_sample_data *data, struct pt_regs *regs)
+{
+	struct perf_event_attr attr;
+
+	/*
+	 * Disable the breakpoint request here since ptrace has defined a
+	 * one-shot behaviour for breakpoint exceptions in PPC64.
+	 * The SIGTRAP signal is generated automatically for us in do_dabr().
+	 * We don't have to do anything about that here
+	 */
+	attr = bp->attr;
+	attr.disabled = true;
+	modify_user_hw_breakpoint(bp, &attr);
+}
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
 int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 			       unsigned long data)
 {
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	int ret;
+	struct thread_struct *thread = &(task->thread);
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
 	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
 	 *  For embedded processors we support one DAC and no IAC's at the
 	 *  moment.
@@ -896,6 +923,43 @@ int ptrace_set_debugreg(struct task_stru
 	/* Ensure breakpoint translation bit is set */
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	bp = thread->ptrace_bps[0];
+	if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
+		if (bp) {
+			unregister_hw_breakpoint(bp);
+			thread->ptrace_bps[0] = NULL;
+		}
+		return 0;
+	}
+	if (bp) {
+		attr = bp->attr;
+		attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
+		arch_bp_generic_fields(data &
+					(DABR_DATA_WRITE | DABR_DATA_READ),
+							&attr.bp_type);
+		ret =  modify_user_hw_breakpoint(bp, &attr);
+		if (ret)
+			return ret;
+		thread->ptrace_bps[0] = bp;
+		thread->dabr = data;
+		return 0;
+	}
+
+	/* Create a new breakpoint request if one doesn't exist already */
+	hw_breakpoint_init(&attr);
+	attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
+	arch_bp_generic_fields(data & (DABR_DATA_WRITE | DABR_DATA_READ),
+								&attr.bp_type);
+
+	thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+							ptrace_triggered, task);
+	if (IS_ERR(bp)) {
+		thread->ptrace_bps[0] = NULL;
+		return PTR_ERR(bp);
+	}
+
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
 	/* Move contents to the DABR register */
 	task->thread.dabr = data;
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/process.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/process.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/process.c
@@ -462,8 +462,14 @@ struct task_struct *__switch_to(struct t
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	switch_booke_debug_regs(&new->thread);
 #else
+/*
+ * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
+ * schedule DABR
+ */
+#ifndef CONFIG_HAVE_HW_BREAKPOINT
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
 
 
Index: linux-2.6.ppc64_test/arch/powerpc/include/asm/cputable.h
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/include/asm/cputable.h
+++ linux-2.6.ppc64_test/arch/powerpc/include/asm/cputable.h
@@ -516,6 +516,10 @@ static inline int cpu_has_feature(unsign
 		& feature);
 }
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+#define HBP_NUM 1
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/machine_kexec_64.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/machine_kexec_64.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/machine_kexec_64.c
@@ -25,6 +25,7 @@
 #include <asm/sections.h>	/* _end */
 #include <asm/prom.h>
 #include <asm/smp.h>
+#include <asm/hw_breakpoint.h>
 
 int default_machine_kexec_prepare(struct kimage *image)
 {
@@ -165,6 +166,7 @@ static void kexec_smp_down(void *arg)
 	while(kexec_all_irq_disabled == 0)
 		cpu_relax();
 	mb(); /* make sure all irqs are disabled before this */
+	hw_breakpoint_disable();
 	/*
 	 * Now every CPU has IRQs off, we can clear out any pending
 	 * IPIs and be sure that no more will come in after this.
@@ -180,6 +182,7 @@ static void kexec_prepare_cpus_wait(int 
 {
 	int my_cpu, i, notified=-1;
 
+	hw_breakpoint_disable();
 	my_cpu = get_cpu();
 	/* Make sure each CPU has atleast made it to the state we need */
 	for (i=0; i < NR_CPUS; i++) {
Index: linux-2.6.ppc64_test/arch/powerpc/lib/Makefile
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/lib/Makefile
+++ linux-2.6.ppc64_test/arch/powerpc/lib/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PPC64)	+= copypage_64.o cop
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
 obj-$(CONFIG_XMON)	+= sstep.o
 obj-$(CONFIG_KPROBES)	+= sstep.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= sstep.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o
Index: linux-2.6.ppc64_test/arch/powerpc/Kconfig
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/Kconfig
+++ linux-2.6.ppc64_test/arch/powerpc/Kconfig
@@ -141,6 +141,7 @@ config PPC
 	select GENERIC_ATOMIC64 if PPC32
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
 
 config EARLY_PRINTK
 	bool

Re: [Patch 2/4] PPC64-HWBKPT: Implement hw-breakpoints for PowerPC BookIII S

[Paul Mackerras]

On Tue, May 25, 2010 at 02:44:20PM +0530, K.Prasad wrote:

> Implement perf-events based hw-breakpoint interfaces for PowerPC Book III S
> processors. These interfaces help arbitrate requests from various users and
> schedules them as appropriate.

A few comments on the code below...

> +int __kprobes hw_breakpoint_handler(struct die_args *args)
> +{
> +	bool is_ptrace_bp = false;
> +	int rc = NOTIFY_STOP;
> +	struct perf_event *bp;
> +	struct pt_regs *regs = args->regs;
> +	unsigned long dar = regs->dar;
> +	int stepped = 1;
> +	struct arch_hw_breakpoint *info;
> +
> +	/* Disable breakpoints during exception handling */
> +	set_dabr(0);
> +	/*
> +	 * The counter may be concurrently released but that can only
> +	 * occur from a call_rcu() path. We can then safely fetch
> +	 * the breakpoint, use its callback, touch its counter
> +	 * while we are in an rcu_read_lock() path.
> +	 */
> +	rcu_read_lock();
> +
> +	bp = __get_cpu_var(bp_per_reg);
> +	if (!bp)
> +		goto out;
> +	info = counter_arch_bp(bp);
> +	is_ptrace_bp = (bp->overflow_handler == ptrace_triggered) ?
> +			true : false;
> +
> +	/*
> +	 * Verify if dar lies within the address range occupied by the symbol
> +	 * being watched to filter extraneous exceptions.
> +	 */
> +	if (!((bp->attr.bp_addr <= dar) &&
> +	    (dar <= (bp->attr.bp_addr + bp->attr.bp_len))) &&
> +	    (!is_ptrace_bp))
> +		/*
> +		 * This exception is triggered not because of a memory access on
> +		 * the monitored variable but in the double-word address range
> +		 * in which it is contained. We will consume this exception,
> +		 * considering it as 'noise'.
> +		 */
> +		goto restore_bp;

At this point we have to do the single-stepping, because the NIP is
still pointing at the instruction that caused the exception, and if we
just return to it with DABR set we won't make any progress, we'll just
take the same exception again immediately.

> +/*
> + * Handle single-step exceptions following a DABR hit.
> + */
> +int __kprobes single_step_dabr_instruction(struct die_args *args)
> +{
> +	struct pt_regs *regs = args->regs;
> +	struct perf_event *bp = NULL;
> +	struct arch_hw_breakpoint *bp_info;
> +
> +	bp = current->thread.last_hit_ubp;
> +	/*
> +	 * Check if we are single-stepping as a result of a
> +	 * previous HW Breakpoint exception
> +	 */
> +	if (!bp)
> +		return NOTIFY_DONE;
> +
> +	bp_info = counter_arch_bp(bp);
> +
> +	/*
> +	 * We shall invoke the user-defined callback function in the single
> +	 * stepping handler to confirm to 'trigger-after-execute' semantics
> +	 */
> +	perf_bp_event(bp, regs);
> +
> +	/*
> +	 * Do not disable MSR_SE if the process was already in
> +	 * single-stepping mode.
> +	 */
> +	if (!test_thread_flag(TIF_SINGLESTEP))
> +		regs->msr &= ~MSR_SE;
> +
> +	set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION);
> +	return NOTIFY_STOP;
> +}

Nowhere in here do we reset current->thread.last_hit_ubp, yet other
parts of the code assume that .last_hit_ubp != NULL means that we are
currently single-stepping.  I think we need to clear .last_hit_ubp
here.

> Index: linux-2.6.ppc64_test/arch/powerpc/kernel/process.c
> ===================================================================
> --- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/process.c
> +++ linux-2.6.ppc64_test/arch/powerpc/kernel/process.c
> @@ -462,8 +462,14 @@ struct task_struct *__switch_to(struct t
>  #ifdef CONFIG_PPC_ADV_DEBUG_REGS
>  	switch_booke_debug_regs(&new->thread);
>  #else
> +/*
> + * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
> + * schedule DABR
> + */
> +#ifndef CONFIG_HAVE_HW_BREAKPOINT
>  	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
>  		set_dabr(new->thread.dabr);
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
>  #endif

Have you checked all the places that set_dabr is called to see whether
they are still needed with CONFIG_HAVE_HW_BREAKPOINT?

> Index: linux-2.6.ppc64_test/arch/powerpc/include/asm/cputable.h
> ===================================================================
> --- linux-2.6.ppc64_test.orig/arch/powerpc/include/asm/cputable.h
> +++ linux-2.6.ppc64_test/arch/powerpc/include/asm/cputable.h
> @@ -516,6 +516,10 @@ static inline int cpu_has_feature(unsign
>  		& feature);
>  }
>  
> +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> +#define HBP_NUM 1
> +#endif /* CONFIG_HAVE_HW_BREAKPOINT */

Why is this defined here, not in <asm/hw_breakpoint.h> ?

Paul.

Re: [Patch 2/4] PPC64-HWBKPT: Implement hw-breakpoints for PowerPC BookIII S

[K.Prasad]

On Thu, May 27, 2010 at 04:19:40PM +1000, Paul Mackerras wrote:
> On Tue, May 25, 2010 at 02:44:20PM +0530, K.Prasad wrote:
> 
> > Implement perf-events based hw-breakpoint interfaces for PowerPC Book III S
> > processors. These interfaces help arbitrate requests from various users and
> > schedules them as appropriate.
> 
> A few comments on the code below...
> 

I've posted a new patchset that addresses almost all of your comments.
Please find them here: linuxppc-dev message-id:
20100528063924.GA8679@in.ibm.com

> > +int __kprobes hw_breakpoint_handler(struct die_args *args)
> > +{
> > +	bool is_ptrace_bp = false;
> > +	int rc = NOTIFY_STOP;
> > +	struct perf_event *bp;
> > +	struct pt_regs *regs = args->regs;
> > +	unsigned long dar = regs->dar;
> > +	int stepped = 1;
> > +	struct arch_hw_breakpoint *info;
> > +
> > +	/* Disable breakpoints during exception handling */
> > +	set_dabr(0);
> > +	/*
> > +	 * The counter may be concurrently released but that can only
> > +	 * occur from a call_rcu() path. We can then safely fetch
> > +	 * the breakpoint, use its callback, touch its counter
> > +	 * while we are in an rcu_read_lock() path.
> > +	 */
> > +	rcu_read_lock();
> > +
> > +	bp = __get_cpu_var(bp_per_reg);
> > +	if (!bp)
> > +		goto out;
> > +	info = counter_arch_bp(bp);
> > +	is_ptrace_bp = (bp->overflow_handler == ptrace_triggered) ?
> > +			true : false;
> > +
> > +	/*
> > +	 * Verify if dar lies within the address range occupied by the symbol
> > +	 * being watched to filter extraneous exceptions.
> > +	 */
> > +	if (!((bp->attr.bp_addr <= dar) &&
> > +	    (dar <= (bp->attr.bp_addr + bp->attr.bp_len))) &&
> > +	    (!is_ptrace_bp))
> > +		/*
> > +		 * This exception is triggered not because of a memory access on
> > +		 * the monitored variable but in the double-word address range
> > +		 * in which it is contained. We will consume this exception,
> > +		 * considering it as 'noise'.
> > +		 */
> > +		goto restore_bp;
> 
> At this point we have to do the single-stepping, because the NIP is
> still pointing at the instruction that caused the exception, and if we
> just return to it with DABR set we won't make any progress, we'll just
> take the same exception again immediately.
> 

I don't know how I convinced myself earlier that this would work :-)

Given that the instructions needs to be emulated in the same manner as
others, I've re-used the ptrace_bps[] member in 'thread_struct' as a
flag to indicate such breakpoints. This will be later checked in
single_step_dabr_instruction() to prevent invocation of
perf_event_bp().

> > +/*
> > + * Handle single-step exceptions following a DABR hit.
> > + */
> > +int __kprobes single_step_dabr_instruction(struct die_args *args)
> > +{
> > +	struct pt_regs *regs = args->regs;
> > +	struct perf_event *bp = NULL;
> > +	struct arch_hw_breakpoint *bp_info;
> > +
> > +	bp = current->thread.last_hit_ubp;
> > +	/*
> > +	 * Check if we are single-stepping as a result of a
> > +	 * previous HW Breakpoint exception
> > +	 */
> > +	if (!bp)
> > +		return NOTIFY_DONE;
> > +
> > +	bp_info = counter_arch_bp(bp);
> > +
> > +	/*
> > +	 * We shall invoke the user-defined callback function in the single
> > +	 * stepping handler to confirm to 'trigger-after-execute' semantics
> > +	 */
> > +	perf_bp_event(bp, regs);
> > +
> > +	/*
> > +	 * Do not disable MSR_SE if the process was already in
> > +	 * single-stepping mode.
> > +	 */
> > +	if (!test_thread_flag(TIF_SINGLESTEP))
> > +		regs->msr &= ~MSR_SE;
> > +
> > +	set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION);
> > +	return NOTIFY_STOP;
> > +}
> 
> Nowhere in here do we reset current->thread.last_hit_ubp, yet other
> parts of the code assume that .last_hit_ubp != NULL means that we are
> currently single-stepping.  I think we need to clear .last_hit_ubp
> here.
> 

True, made the change.

> > Index: linux-2.6.ppc64_test/arch/powerpc/kernel/process.c
> > ===================================================================
> > --- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/process.c
> > +++ linux-2.6.ppc64_test/arch/powerpc/kernel/process.c
> > @@ -462,8 +462,14 @@ struct task_struct *__switch_to(struct t
> >  #ifdef CONFIG_PPC_ADV_DEBUG_REGS
> >  	switch_booke_debug_regs(&new->thread);
> >  #else
> > +/*
> > + * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
> > + * schedule DABR
> > + */
> > +#ifndef CONFIG_HAVE_HW_BREAKPOINT
> >  	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
> >  		set_dabr(new->thread.dabr);
> > +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> >  #endif
> 
> Have you checked all the places that set_dabr is called to see whether
> they are still needed with CONFIG_HAVE_HW_BREAKPOINT?
> 

Yes. All invocations of set_dabr() or their caller functions are enclosed
within #ifdef CONFIG_HAVE_HW_BREAKPOINT.

> > Index: linux-2.6.ppc64_test/arch/powerpc/include/asm/cputable.h
> > ===================================================================
> > --- linux-2.6.ppc64_test.orig/arch/powerpc/include/asm/cputable.h
> > +++ linux-2.6.ppc64_test/arch/powerpc/include/asm/cputable.h
> > @@ -516,6 +516,10 @@ static inline int cpu_has_feature(unsign
> >  		& feature);
> >  }
> >  
> > +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> > +#define HBP_NUM 1
> > +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> 
> Why is this defined here, not in <asm/hw_breakpoint.h> ?
> 

We need HBP_NUM value for arch/powerpc/include/asm/processor.h
and if asm/hw_breakpoint.h is included there, it caused recursive
dependancies. After more discussions with the community (as in
linuxppc-dev: message-id: 20100330101234.GA14734@in.ibm.com) we finally
decided to put it in cputable.h

We will have more related definitions to accompany this when support for
BookIII E is brought in.

Thanks,
K.Prasad

[Patch 3/4] PPC64-HWBKPT: Handle concurrent alignment interrupts

[K.Prasad]

An alignment interrupt may intervene between a DSI/hw-breakpoint exception
and the single-step exception. Enable the alignment interrupt (through
modifications to emulate_single_step()) to notify the single-step exception
handler for proper restoration of hw-breakpoints.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
 arch/powerpc/kernel/traps.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

Index: linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/traps.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
@@ -602,7 +602,7 @@ void RunModeException(struct pt_regs *re
 
 void __kprobes single_step_exception(struct pt_regs *regs)
 {
-	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
+	clear_single_step(regs);
 
 	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
 					5, SIGTRAP) == NOTIFY_STOP)
@@ -621,10 +621,7 @@ void __kprobes single_step_exception(str
  */
 static void emulate_single_step(struct pt_regs *regs)
 {
-	if (single_stepping(regs)) {
-		clear_single_step(regs);
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
+	single_step_exception(regs);
 }
 
 static inline int __parse_fpscr(unsigned long fpscr)

Re: [Patch 3/4] PPC64-HWBKPT: Handle concurrent alignment interrupts

[Paul Mackerras]

On Tue, May 25, 2010 at 02:44:35PM +0530, K.Prasad wrote:

> An alignment interrupt may intervene between a DSI/hw-breakpoint exception
> and the single-step exception. Enable the alignment interrupt (through
> modifications to emulate_single_step()) to notify the single-step exception
> handler for proper restoration of hw-breakpoints.
> 
> Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
> ---
>  arch/powerpc/kernel/traps.c |    7 ++-----
>  1 file changed, 2 insertions(+), 5 deletions(-)
> 
> Index: linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
> ===================================================================
> --- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/traps.c
> +++ linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
> @@ -602,7 +602,7 @@ void RunModeException(struct pt_regs *re
>  
>  void __kprobes single_step_exception(struct pt_regs *regs)
>  {
> -	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
> +	clear_single_step(regs);
>  
>  	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
>  					5, SIGTRAP) == NOTIFY_STOP)
> @@ -621,10 +621,7 @@ void __kprobes single_step_exception(str
>   */
>  static void emulate_single_step(struct pt_regs *regs)
>  {
> -	if (single_stepping(regs)) {
> -		clear_single_step(regs);
> -		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
> -	}
> +	single_step_exception(regs);
>  }

We still need the if (single_stepping(regs)) in emulate_single_step.
We don't want to send the process a SIGTRAP every time it gets an
alignment interrupt. :)

Paul.

Re: [Patch 3/4] PPC64-HWBKPT: Handle concurrent alignment interrupts

[K.Prasad]

On Thu, May 27, 2010 at 04:20:44PM +1000, Paul Mackerras wrote:
> On Tue, May 25, 2010 at 02:44:35PM +0530, K.Prasad wrote:
> 
> > An alignment interrupt may intervene between a DSI/hw-breakpoint exception
> > and the single-step exception. Enable the alignment interrupt (through
> > modifications to emulate_single_step()) to notify the single-step exception
> > handler for proper restoration of hw-breakpoints.
> > 
> > Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
> > ---
> >  arch/powerpc/kernel/traps.c |    7 ++-----
> >  1 file changed, 2 insertions(+), 5 deletions(-)
> > 
> > Index: linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
> > ===================================================================
> > --- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/traps.c
> > +++ linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
> > @@ -602,7 +602,7 @@ void RunModeException(struct pt_regs *re
> >  
> >  void __kprobes single_step_exception(struct pt_regs *regs)
> >  {
> > -	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
> > +	clear_single_step(regs);
> >  
> >  	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
> >  					5, SIGTRAP) == NOTIFY_STOP)
> > @@ -621,10 +621,7 @@ void __kprobes single_step_exception(str
> >   */
> >  static void emulate_single_step(struct pt_regs *regs)
> >  {
> > -	if (single_stepping(regs)) {
> > -		clear_single_step(regs);
> > -		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
> > -	}
> > +	single_step_exception(regs);
> >  }
> 
> We still need the if (single_stepping(regs)) in emulate_single_step.
> We don't want to send the process a SIGTRAP every time it gets an
> alignment interrupt. :)
> 
> Paul.

Agreed, and made changes to that effect in version XXII (as seen in
patch linuxppc-dev message-id: 20100528064017.GD8679@in.ibm.com).

Thanks,
K.Prasad

[Patch 4/4] PPC64-HWBKPT: Enable hw-breakpoints while handling intervening signals

[K.Prasad]

A signal delivered between a hw_breakpoint_handler() and the
single_step_dabr_instruction() will not have the breakpoint active during
signal handling (since breakpoint will not be restored through single-stepping
due to absence of MSR_SE bit on the signal frame). Enable breakpoints before
signal delivery.

Restore hw-breakpoints if the user-context is altered in the signal handler.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/hw_breakpoint.h |    2 ++
 arch/powerpc/kernel/hw_breakpoint.c      |   16 ++++++++++++++++
 arch/powerpc/kernel/signal.c             |    3 +++
 arch/powerpc/kernel/signal_32.c          |    2 ++
 arch/powerpc/kernel/signal_64.c          |    2 ++
 5 files changed, 25 insertions(+)

Index: linux-2.6.ppc64_test/arch/powerpc/include/asm/hw_breakpoint.h
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/include/asm/hw_breakpoint.h
+++ linux-2.6.ppc64_test/arch/powerpc/include/asm/hw_breakpoint.h
@@ -65,9 +65,11 @@ static inline void hw_breakpoint_disable
 {
 	set_dabr(0);
 }
+extern void thread_change_pc(struct task_struct *tsk);
 
 #else	/* CONFIG_HAVE_HW_BREAKPOINT */
 static inline void hw_breakpoint_disable(void) { }
+static inline void thread_change_pc(struct task_struct *tsk) { }
 #endif	/* CONFIG_HAVE_HW_BREAKPOINT */
 #endif	/* __KERNEL__ */
 #endif	/* _PPC_BOOK3S_64_HW_BREAKPOINT_H */
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/hw_breakpoint.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/hw_breakpoint.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/hw_breakpoint.c
@@ -176,6 +176,22 @@ int arch_validate_hwbkpt_settings(struct
 }
 
 /*
+ * Restores the breakpoint on the debug registers.
+ * Invoke this function if it is known that the execution context is about to
+ * change to cause loss of MSR_SE settings.
+ */
+void thread_change_pc(struct task_struct *tsk)
+{
+	struct arch_hw_breakpoint *info;
+
+	if (likely(!tsk->thread.last_hit_ubp))
+		return;
+
+	info = counter_arch_bp(tsk->thread.last_hit_ubp);
+	set_dabr(info->address | info->type | DABR_TRANSLATION);
+}
+
+/*
  * Handle debug exception notifications.
  */
 int __kprobes hw_breakpoint_handler(struct die_args *args)
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/signal.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/signal.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/signal.c
@@ -11,6 +11,7 @@
 
 #include <linux/tracehook.h>
 #include <linux/signal.h>
+#include <asm/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
 
@@ -149,6 +150,8 @@ static int do_signal_pending(sigset_t *o
 	if (current->thread.dabr)
 		set_dabr(current->thread.dabr);
 #endif
+	 /* Re-enable the breakpoints for the signal stack */
+	thread_change_pc(current);
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/signal_64.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/signal_64.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/signal_64.c
@@ -33,6 +33,7 @@
 #include <asm/cacheflush.h>
 #include <asm/syscalls.h>
 #include <asm/vdso.h>
+#include <asm/hw_breakpoint.h>
 
 #include "signal.h"
 
@@ -312,6 +313,7 @@ int sys_swapcontext(struct ucontext __us
 		    || __copy_to_user(&old_ctx->uc_sigmask,
 				      &current->blocked, sizeof(sigset_t)))
 			return -EFAULT;
+		thread_change_pc(current);
 	}
 	if (new_ctx == NULL)
 		return 0;
Index: linux-2.6.ppc64_test/arch/powerpc/kernel/signal_32.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/signal_32.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/signal_32.c
@@ -42,6 +42,7 @@
 #include <asm/syscalls.h>
 #include <asm/sigcontext.h>
 #include <asm/vdso.h>
+#include <asm/hw_breakpoint.h>
 #ifdef CONFIG_PPC64
 #include "ppc32.h"
 #include <asm/unistd.h>
@@ -996,6 +997,7 @@ long sys_swapcontext(struct ucontext __u
 		    || put_sigset_t(&old_ctx->uc_sigmask, &current->blocked)
 		    || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
 			return -EFAULT;
+		thread_change_pc(current);
 	}
 	if (new_ctx == NULL)
 		return 0;

Re: [Patch 4/4] PPC64-HWBKPT: Enable hw-breakpoints while handling intervening signals

[Paul Mackerras]

On Tue, May 25, 2010 at 02:45:05PM +0530, K.Prasad wrote:

> A signal delivered between a hw_breakpoint_handler() and the
> single_step_dabr_instruction() will not have the breakpoint active during
> signal handling (since breakpoint will not be restored through single-stepping
> due to absence of MSR_SE bit on the signal frame). Enable breakpoints before
> signal delivery.
> 
> Restore hw-breakpoints if the user-context is altered in the signal handler.

...

>  /*
> + * Restores the breakpoint on the debug registers.
> + * Invoke this function if it is known that the execution context is about to
> + * change to cause loss of MSR_SE settings.
> + */
> +void thread_change_pc(struct task_struct *tsk)
> +{
> +	struct arch_hw_breakpoint *info;
> +
> +	if (likely(!tsk->thread.last_hit_ubp))
> +		return;
> +
> +	info = counter_arch_bp(tsk->thread.last_hit_ubp);
> +	set_dabr(info->address | info->type | DABR_TRANSLATION);
> +}

I think this function needs to clear current->thread.last_hit_ubp.
You also need to pass the regs to it so it can clear MSR_SE from
regs->msr.

> Index: linux-2.6.ppc64_test/arch/powerpc/kernel/signal_64.c
> ===================================================================
> --- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/signal_64.c
> +++ linux-2.6.ppc64_test/arch/powerpc/kernel/signal_64.c
> @@ -33,6 +33,7 @@
>  #include <asm/cacheflush.h>
>  #include <asm/syscalls.h>
>  #include <asm/vdso.h>
> +#include <asm/hw_breakpoint.h>
>  
>  #include "signal.h"
>  
> @@ -312,6 +313,7 @@ int sys_swapcontext(struct ucontext __us
>  		    || __copy_to_user(&old_ctx->uc_sigmask,
>  				      &current->blocked, sizeof(sigset_t)))
>  			return -EFAULT;
> +		thread_change_pc(current);

This is in the part of the code that is saving the old context, after
the old context has been saved.  We need to do it before saving the
old context so that the saved context doesn't have the MSR_SE bit set
in its MSR image.  And similarly in the 32-bit version.

In fact, we probably don't need to do anything here.  We should never
get into a system call (such as sys_swapcontext or sys_sigreturn) when
single-stepping a load or store that caused a DABR match.  If we do,
something very strange is happening.  So I would leave out the
swapcontext changes for this version.

Paul.

[Patch 3/4] PPC64-HWBKPT: Handle concurrent alignment interrupts

[K.Prasad]

An alignment interrupt may intervene between a DSI/hw-breakpoint exception
and the single-step exception. Enable the alignment interrupt (through
modifications to emulate_single_step()) to notify the single-step exception
handler for proper restoration of hw-breakpoints.

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
 arch/powerpc/kernel/traps.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

Index: linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
===================================================================
--- linux-2.6.ppc64_test.orig/arch/powerpc/kernel/traps.c
+++ linux-2.6.ppc64_test/arch/powerpc/kernel/traps.c
@@ -602,7 +602,7 @@ void RunModeException(struct pt_regs *re
 
 void __kprobes single_step_exception(struct pt_regs *regs)
 {
-	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
+	clear_single_step(regs);
 
 	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
 					5, SIGTRAP) == NOTIFY_STOP)
@@ -621,10 +621,7 @@ void __kprobes single_step_exception(str
  */
 static void emulate_single_step(struct pt_regs *regs)
 {
-	if (single_stepping(regs)) {
-		clear_single_step(regs);
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
+	single_step_exception(regs);
 }
 
 static inline int __parse_fpscr(unsigned long fpscr)