From: Marek Vasut <marek.vasut@gmail.com>
To: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: ben-linux@fluff.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-input@vger.kernel.org,
kyungmin.park@samsung.com, dmitry.torokhov@gmail.com
Subject: Re: [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver
Date: Sun, 30 May 2010 05:39:50 +0200 [thread overview]
Message-ID: <201005300539.50619.marek.vasut@gmail.com> (raw)
In-Reply-To: <1275188784-23395-5-git-send-email-jy0922.shim@samsung.com>
Dne Ne 30. května 2010 05:06:24 Joonyoung Shim napsal(a):
> This patch adds support for keypad driver running on Samsung cpus. This
> driver is tested on GONI and Aquila board using S5PC110 cpu.
>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/input/keyboard/Kconfig | 9 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/samsung-keypad.c | 364
> +++++++++++++++++++++++++++++++ 3 files changed, 374 insertions(+), 0
> deletions(-)
> create mode 100644 drivers/input/keyboard/samsung-keypad.c
>
> diff --git a/drivers/input/keyboard/Kconfig
> b/drivers/input/keyboard/Kconfig index d8fa5d7..bf6a50f 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -342,6 +342,15 @@ config KEYBOARD_PXA930_ROTARY
> To compile this driver as a module, choose M here: the
> module will be called pxa930_rotary.
>
> +config KEYBOARD_SAMSUNG
> + tristate "Samsung keypad support"
> + depends on SAMSUNG_DEV_KEYPAD
> + help
> + Say Y here if you want to use the Samsung keypad.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called samsung-keypad.
> +
> config KEYBOARD_STOWAWAY
> tristate "Stowaway keyboard"
> select SERIO
> diff --git a/drivers/input/keyboard/Makefile
> b/drivers/input/keyboard/Makefile index 4596d0c..8f973ed 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
> obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
> obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
> obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
> +obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
> obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
> obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
> obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
> diff --git a/drivers/input/keyboard/samsung-keypad.c
> b/drivers/input/keyboard/samsung-keypad.c new file mode 100644
> index 0000000..f4bcf97
> --- /dev/null
> +++ b/drivers/input/keyboard/samsung-keypad.c
> @@ -0,0 +1,364 @@
> +/*
> + * samsung-keypad.c -- Samsung keypad driver
> + *
> + * Copyright (C) 2010 Samsung Electronics Co.Ltd
> + * Author: Joonyoung Shim <jy0922.shim@samsung.com>
> + * Author: Donghwa Lee <dh09.lee@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it + * under the terms of the GNU General Public License as published
> by the + * Free Software Foundation; either version 2 of the License,
> or (at your + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <plat/cpu.h>
> +#include <plat/keypad.h>
> +#include <plat/regs-keypad.h>
> +
> +struct samsung_kp {
> + struct input_dev *input_dev;
> + struct timer_list timer;
> + struct clk *clk;
> + struct work_struct work;
> + void __iomem *base;
> + unsigned short *keycodes;
> + unsigned int row_shift;
> + unsigned int rows;
> + unsigned int cols;
> + unsigned int row_state[SAMSUNG_MAX_COLS];
> + int irq;
> +};
> +
> +static void samsung_kp_scan(struct samsung_kp *keypad, unsigned int
> *row_state) +{
> + unsigned int col;
> + unsigned int val;
> +
> + for (col = 0; col < keypad->cols; col++) {
> +#if CONFIG_ARCH_S5PV210
> + val = S5PV210_KEYIFCOLEN_MASK;
> + val &= ~(1 << col) << 8;
> +#else
> + val = SAMSUNG_KEYIFCOL_MASK;
> + val &= ~(1 << col);
> +#endif
No, what if you want to run this on both S5PV210 and some other samsung soc?
Fix the #if CONFIG_ARCH_S5PV210 please. Maybe like this:
if (cpu_is_s5pv210()) {} else {} ?
The rest looks good.
Cheers!
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver
Date: Sun, 30 May 2010 05:39:50 +0200 [thread overview]
Message-ID: <201005300539.50619.marek.vasut@gmail.com> (raw)
In-Reply-To: <1275188784-23395-5-git-send-email-jy0922.shim@samsung.com>
Dne Ne 30. kv?tna 2010 05:06:24 Joonyoung Shim napsal(a):
> This patch adds support for keypad driver running on Samsung cpus. This
> driver is tested on GONI and Aquila board using S5PC110 cpu.
>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/input/keyboard/Kconfig | 9 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/samsung-keypad.c | 364
> +++++++++++++++++++++++++++++++ 3 files changed, 374 insertions(+), 0
> deletions(-)
> create mode 100644 drivers/input/keyboard/samsung-keypad.c
>
> diff --git a/drivers/input/keyboard/Kconfig
> b/drivers/input/keyboard/Kconfig index d8fa5d7..bf6a50f 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -342,6 +342,15 @@ config KEYBOARD_PXA930_ROTARY
> To compile this driver as a module, choose M here: the
> module will be called pxa930_rotary.
>
> +config KEYBOARD_SAMSUNG
> + tristate "Samsung keypad support"
> + depends on SAMSUNG_DEV_KEYPAD
> + help
> + Say Y here if you want to use the Samsung keypad.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called samsung-keypad.
> +
> config KEYBOARD_STOWAWAY
> tristate "Stowaway keyboard"
> select SERIO
> diff --git a/drivers/input/keyboard/Makefile
> b/drivers/input/keyboard/Makefile index 4596d0c..8f973ed 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
> obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
> obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
> obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
> +obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
> obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
> obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
> obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
> diff --git a/drivers/input/keyboard/samsung-keypad.c
> b/drivers/input/keyboard/samsung-keypad.c new file mode 100644
> index 0000000..f4bcf97
> --- /dev/null
> +++ b/drivers/input/keyboard/samsung-keypad.c
> @@ -0,0 +1,364 @@
> +/*
> + * samsung-keypad.c -- Samsung keypad driver
> + *
> + * Copyright (C) 2010 Samsung Electronics Co.Ltd
> + * Author: Joonyoung Shim <jy0922.shim@samsung.com>
> + * Author: Donghwa Lee <dh09.lee@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it + * under the terms of the GNU General Public License as published
> by the + * Free Software Foundation; either version 2 of the License,
> or (at your + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <plat/cpu.h>
> +#include <plat/keypad.h>
> +#include <plat/regs-keypad.h>
> +
> +struct samsung_kp {
> + struct input_dev *input_dev;
> + struct timer_list timer;
> + struct clk *clk;
> + struct work_struct work;
> + void __iomem *base;
> + unsigned short *keycodes;
> + unsigned int row_shift;
> + unsigned int rows;
> + unsigned int cols;
> + unsigned int row_state[SAMSUNG_MAX_COLS];
> + int irq;
> +};
> +
> +static void samsung_kp_scan(struct samsung_kp *keypad, unsigned int
> *row_state) +{
> + unsigned int col;
> + unsigned int val;
> +
> + for (col = 0; col < keypad->cols; col++) {
> +#if CONFIG_ARCH_S5PV210
> + val = S5PV210_KEYIFCOLEN_MASK;
> + val &= ~(1 << col) << 8;
> +#else
> + val = SAMSUNG_KEYIFCOL_MASK;
> + val &= ~(1 << col);
> +#endif
No, what if you want to run this on both S5PV210 and some other samsung soc?
Fix the #if CONFIG_ARCH_S5PV210 please. Maybe like this:
if (cpu_is_s5pv210()) {} else {} ?
The rest looks good.
Cheers!
next prev parent reply other threads:[~2010-05-30 3:41 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-30 3:06 [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 2/5] ARM: S5PV210: Add keypad device helpers Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 3/5] ARM: S5PV210: Add keypad device to the GONI board Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 4/5] ARM: S5PV210: Add keypad device to the Aquila board Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:39 ` Marek Vasut [this message]
2010-05-30 3:39 ` Marek Vasut
2010-05-30 3:44 ` Ben Dooks
2010-05-30 3:44 ` Ben Dooks
2010-05-30 3:42 ` Joonyoung Shim
2010-05-30 3:42 ` Joonyoung Shim
2010-05-30 3:42 ` Ben Dooks
2010-05-30 3:42 ` Ben Dooks
2010-05-30 4:35 ` Joonyoung Shim
2010-05-30 4:35 ` Joonyoung Shim
2010-06-03 1:00 ` Ben Dooks
2010-06-03 1:00 ` Ben Dooks
2010-06-03 4:47 ` Joonyoung Shim
2010-06-03 4:47 ` Joonyoung Shim
2010-06-07 7:30 ` Marek Szyprowski
2010-06-07 7:30 ` Marek Szyprowski
2010-05-30 3:42 ` [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support Marek Vasut
2010-05-30 3:42 ` Marek Vasut
2010-05-30 4:46 ` Jassi Brar
2010-05-30 4:46 ` Jassi Brar
2010-05-30 4:51 ` Ben Dooks
2010-05-30 4:51 ` Ben Dooks
2010-05-30 5:04 ` Jassi Brar
2010-05-30 5:04 ` Jassi Brar
2010-05-30 5:21 ` Ben Dooks
2010-05-30 5:21 ` Ben Dooks
2010-05-31 9:44 ` Mark Brown
2010-05-31 9:44 ` Mark Brown
2010-05-30 8:52 ` Dmitry Torokhov
2010-05-30 8:52 ` Dmitry Torokhov
2010-05-31 1:14 ` Joonyoung Shim
2010-05-31 1:14 ` Joonyoung Shim
2010-05-31 0:06 ` Kukjin Kim
2010-05-31 0:06 ` Kukjin Kim
2010-05-31 0:15 ` Marek Vasut
2010-05-31 0:15 ` Marek Vasut
2010-05-31 1:09 ` Joonyoung Shim
2010-05-31 1:09 ` Joonyoung Shim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201005300539.50619.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=ben-linux@fluff.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.