From: Ben Dooks <ben-linux@fluff.org>
To: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>,
kyungmin.park@samsung.com, linux-samsung-soc@vger.kernel.org,
dmitry.torokhov@gmail.com, linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org
Subject: Re: [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver
Date: Thu, 3 Jun 2010 02:00:25 +0100 [thread overview]
Message-ID: <20100603010025.GA14272@trinity.fluff.org> (raw)
In-Reply-To: <4C01EB2E.4020600@samsung.com>
On Sun, May 30, 2010 at 01:35:58PM +0900, Joonyoung Shim wrote:
> >> +static void samsung_kp_timer(unsigned long data)
> >> +{
> >> + struct samsung_kp *keypad = (struct samsung_kp *)data;
> >> +
> >> + schedule_work(&keypad->work);
would schedule_delayed_work() avoid the need for a timer here?
> >> + keypad = kzalloc(sizeof(*keypad), GFP_KERNEL);
> >> + keycodes = kzalloc((pdata->rows << row_shift) * sizeof(*keycodes),
> >> + GFP_KERNEL);
> >
> > you could allocate this in one go.
> >
>
> Hmm, how i do it? Do you mean to allocate keypad and keycodes together?
There's a couple of ways to do this, they may of course be not the nicest
ways.
make the last entry of the first (know size) structure a unsized array.
as so:
struct a {
...
struct b t[];
}
then do
struct a *my_a;
my_a = kzalloc(sizeof(struct a ) + sizeof(struct b) * nr_b);
or by incrementing the pointer:
struct a *my_a;
struct b *my_b;
my_a = kzalloc(sizeof(struct a ) + sizeof(struct b) * nr_b);
my_b = (struct b *)(my_a + 1);
> >> + keypad->clk = clk_get(&pdev->dev, "keypad");
I'm going to get rid of this practice, it should be clk_get(&pdev->dev, NULL),
see up-comming clock changes.
> >> + ret = request_irq(keypad->irq, samsung_kp_interrupt, 0,
> >> + dev_name(&pdev->dev), keypad);
> >> +
> >> + if (ret)
NO PRINT HERE?
> >> + goto err_disable_clk;
> >> +
> >> + input_dev->name = pdev->name;
> >> + input_dev->id.bustype = BUS_HOST;
> >> + input_dev->dev.parent = &pdev->dev;
> >> +
> >> + input_dev->evbit[0] = BIT_MASK(EV_KEY);
> >> + if (pdata->rep)
> >> + input_dev->evbit[0] |= BIT_MASK(EV_REP);
> >> +
> >> + input_dev->keycode = keycodes;
> >> + input_dev->keycodesize = sizeof(*keycodes);
> >> + input_dev->keycodemax = pdata->rows << row_shift;
> >> +
> >> + matrix_keypad_build_keymap(keymap_data, row_shift,
> >> + input_dev->keycode, input_dev->keybit);
> >> +
> >> + ret = input_register_device(keypad->input_dev);
> >> + if (ret)
> >> + goto err_free_irq;
> >> +
> >> + platform_set_drvdata(pdev, keypad);
> >> + clk_disable(keypad->clk);
> >> +
> >> + return 0;
> >> +
> >> +err_free_irq:
> >> + free_irq(keypad->irq, keypad);
> >> +err_disable_clk:
> >> + clk_disable(keypad->clk);
> >> + clk_put(keypad->clk);
> >> +err_unmap_base:
> >> + iounmap(keypad->base);
> >> +err_free_mem:
> >> + input_free_device(input_dev);
> >> + kfree(keycodes);
> >> + kfree(keypad);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int __devexit samsung_kp_remove(struct platform_device *pdev)
> >> +{
> >> + struct samsung_kp *keypad = platform_get_drvdata(pdev);
> >> +
> >> + free_irq(keypad->irq, keypad);
> >> + cancel_work_sync(&keypad->work);
> >> + del_timer_sync(&keypad->timer);
> >> +
> >> + platform_set_drvdata(pdev, NULL);
> >> + input_unregister_device(keypad->input_dev);
> >> +
> >> + clk_disable(keypad->clk);
> >> + clk_put(keypad->clk);
> >> +
> >> + iounmap(keypad->base);
> >> + kfree(keypad->keycodes);
> >> + kfree(keypad);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +#ifdef CONFIG_PM
> >> +static int samsung_kp_suspend(struct device *dev)
> >> +{
> >> + struct platform_device *pdev = to_platform_device(dev);
> >> + struct samsung_kp *keypad = platform_get_drvdata(pdev);
> >> +
> >> + disable_irq(keypad->irq);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int samsung_kp_resume(struct device pdev)
> >> +{
> >> + struct platform_device *pdev = to_platform_device(dev);
> >> + struct samsung_kp *keypad = platform_get_drvdata(pdev);
> >> + unsigned int val;
> >> +
> >> + clk_enable(keypad->clk);
> >> +
> >> + /* enable interrupt and wakeup bit */
> >> + val = SAMSUNG_INT_F_EN | SAMSUNG_INT_R_EN | SAMSUNG_WAKEUPEN;
> >> + writel(val, keypad->base + SAMSUNG_KEYIFCON);
> >> +
> >> + /* KEYIFCOL reg clear */
> >> + writel(0, keypad->base + SAMSUNG_KEYIFCOL);
> >> +
> >> + enable_irq(keypad->irq);
> >> + clk_disable(keypad->clk);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static const struct dev_pm_ops samsung_kp_pm_ops = {
> >> + .suspend = samsung_kp_suspend,
> >> + .resume = samsung_kp_resume,
> >> +};
> >> +#endif
> >> +
> >> +static struct platform_driver samsung_kp_driver = {
> >> + .probe = samsung_kp_probe,
> >> + .remove = __devexit_p(samsung_kp_remove),
> >> + .driver = {
> >> + .name = "samsung-keypad",
> >> + .owner = THIS_MODULE,
> >> +#ifdef CONFIG_PM
> >> + .pm = &samsung_kp_pm_ops,
> >> +#endif
> >> + },
> >> +};
> >> +
> >> +static int __init samsung_kp_init(void)
> >> +{
> >> + return platform_driver_register(&samsung_kp_driver);
> >> +}
> >> +
> >> +static void __exit samsung_kp_exit(void)
> >> +{
> >> + platform_driver_unregister(&samsung_kp_driver);
> >> +}
> >> +
> >> +module_init(samsung_kp_init);
> >> +module_exit(samsung_kp_exit);
> >> +
> >> +MODULE_DESCRIPTION("Samsung keypad driver");
> >> +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
> >> +MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
> >> +MODULE_LICENSE("GPL");
You missed MODULE_ALIAS() for your platform device name
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
WARNING: multiple messages have this Message-ID (diff)
From: ben-linux@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver
Date: Thu, 3 Jun 2010 02:00:25 +0100 [thread overview]
Message-ID: <20100603010025.GA14272@trinity.fluff.org> (raw)
In-Reply-To: <4C01EB2E.4020600@samsung.com>
On Sun, May 30, 2010 at 01:35:58PM +0900, Joonyoung Shim wrote:
> >> +static void samsung_kp_timer(unsigned long data)
> >> +{
> >> + struct samsung_kp *keypad = (struct samsung_kp *)data;
> >> +
> >> + schedule_work(&keypad->work);
would schedule_delayed_work() avoid the need for a timer here?
> >> + keypad = kzalloc(sizeof(*keypad), GFP_KERNEL);
> >> + keycodes = kzalloc((pdata->rows << row_shift) * sizeof(*keycodes),
> >> + GFP_KERNEL);
> >
> > you could allocate this in one go.
> >
>
> Hmm, how i do it? Do you mean to allocate keypad and keycodes together?
There's a couple of ways to do this, they may of course be not the nicest
ways.
make the last entry of the first (know size) structure a unsized array.
as so:
struct a {
...
struct b t[];
}
then do
struct a *my_a;
my_a = kzalloc(sizeof(struct a ) + sizeof(struct b) * nr_b);
or by incrementing the pointer:
struct a *my_a;
struct b *my_b;
my_a = kzalloc(sizeof(struct a ) + sizeof(struct b) * nr_b);
my_b = (struct b *)(my_a + 1);
> >> + keypad->clk = clk_get(&pdev->dev, "keypad");
I'm going to get rid of this practice, it should be clk_get(&pdev->dev, NULL),
see up-comming clock changes.
> >> + ret = request_irq(keypad->irq, samsung_kp_interrupt, 0,
> >> + dev_name(&pdev->dev), keypad);
> >> +
> >> + if (ret)
NO PRINT HERE?
> >> + goto err_disable_clk;
> >> +
> >> + input_dev->name = pdev->name;
> >> + input_dev->id.bustype = BUS_HOST;
> >> + input_dev->dev.parent = &pdev->dev;
> >> +
> >> + input_dev->evbit[0] = BIT_MASK(EV_KEY);
> >> + if (pdata->rep)
> >> + input_dev->evbit[0] |= BIT_MASK(EV_REP);
> >> +
> >> + input_dev->keycode = keycodes;
> >> + input_dev->keycodesize = sizeof(*keycodes);
> >> + input_dev->keycodemax = pdata->rows << row_shift;
> >> +
> >> + matrix_keypad_build_keymap(keymap_data, row_shift,
> >> + input_dev->keycode, input_dev->keybit);
> >> +
> >> + ret = input_register_device(keypad->input_dev);
> >> + if (ret)
> >> + goto err_free_irq;
> >> +
> >> + platform_set_drvdata(pdev, keypad);
> >> + clk_disable(keypad->clk);
> >> +
> >> + return 0;
> >> +
> >> +err_free_irq:
> >> + free_irq(keypad->irq, keypad);
> >> +err_disable_clk:
> >> + clk_disable(keypad->clk);
> >> + clk_put(keypad->clk);
> >> +err_unmap_base:
> >> + iounmap(keypad->base);
> >> +err_free_mem:
> >> + input_free_device(input_dev);
> >> + kfree(keycodes);
> >> + kfree(keypad);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int __devexit samsung_kp_remove(struct platform_device *pdev)
> >> +{
> >> + struct samsung_kp *keypad = platform_get_drvdata(pdev);
> >> +
> >> + free_irq(keypad->irq, keypad);
> >> + cancel_work_sync(&keypad->work);
> >> + del_timer_sync(&keypad->timer);
> >> +
> >> + platform_set_drvdata(pdev, NULL);
> >> + input_unregister_device(keypad->input_dev);
> >> +
> >> + clk_disable(keypad->clk);
> >> + clk_put(keypad->clk);
> >> +
> >> + iounmap(keypad->base);
> >> + kfree(keypad->keycodes);
> >> + kfree(keypad);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +#ifdef CONFIG_PM
> >> +static int samsung_kp_suspend(struct device *dev)
> >> +{
> >> + struct platform_device *pdev = to_platform_device(dev);
> >> + struct samsung_kp *keypad = platform_get_drvdata(pdev);
> >> +
> >> + disable_irq(keypad->irq);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int samsung_kp_resume(struct device pdev)
> >> +{
> >> + struct platform_device *pdev = to_platform_device(dev);
> >> + struct samsung_kp *keypad = platform_get_drvdata(pdev);
> >> + unsigned int val;
> >> +
> >> + clk_enable(keypad->clk);
> >> +
> >> + /* enable interrupt and wakeup bit */
> >> + val = SAMSUNG_INT_F_EN | SAMSUNG_INT_R_EN | SAMSUNG_WAKEUPEN;
> >> + writel(val, keypad->base + SAMSUNG_KEYIFCON);
> >> +
> >> + /* KEYIFCOL reg clear */
> >> + writel(0, keypad->base + SAMSUNG_KEYIFCOL);
> >> +
> >> + enable_irq(keypad->irq);
> >> + clk_disable(keypad->clk);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static const struct dev_pm_ops samsung_kp_pm_ops = {
> >> + .suspend = samsung_kp_suspend,
> >> + .resume = samsung_kp_resume,
> >> +};
> >> +#endif
> >> +
> >> +static struct platform_driver samsung_kp_driver = {
> >> + .probe = samsung_kp_probe,
> >> + .remove = __devexit_p(samsung_kp_remove),
> >> + .driver = {
> >> + .name = "samsung-keypad",
> >> + .owner = THIS_MODULE,
> >> +#ifdef CONFIG_PM
> >> + .pm = &samsung_kp_pm_ops,
> >> +#endif
> >> + },
> >> +};
> >> +
> >> +static int __init samsung_kp_init(void)
> >> +{
> >> + return platform_driver_register(&samsung_kp_driver);
> >> +}
> >> +
> >> +static void __exit samsung_kp_exit(void)
> >> +{
> >> + platform_driver_unregister(&samsung_kp_driver);
> >> +}
> >> +
> >> +module_init(samsung_kp_init);
> >> +module_exit(samsung_kp_exit);
> >> +
> >> +MODULE_DESCRIPTION("Samsung keypad driver");
> >> +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
> >> +MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
> >> +MODULE_LICENSE("GPL");
You missed MODULE_ALIAS() for your platform device name
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
next prev parent reply other threads:[~2010-06-03 1:00 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-30 3:06 [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 2/5] ARM: S5PV210: Add keypad device helpers Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 3/5] ARM: S5PV210: Add keypad device to the GONI board Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 4/5] ARM: S5PV210: Add keypad device to the Aquila board Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:06 ` [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver Joonyoung Shim
2010-05-30 3:06 ` Joonyoung Shim
2010-05-30 3:39 ` Marek Vasut
2010-05-30 3:39 ` Marek Vasut
2010-05-30 3:44 ` Ben Dooks
2010-05-30 3:44 ` Ben Dooks
2010-05-30 3:42 ` Joonyoung Shim
2010-05-30 3:42 ` Joonyoung Shim
2010-05-30 3:42 ` Ben Dooks
2010-05-30 3:42 ` Ben Dooks
2010-05-30 4:35 ` Joonyoung Shim
2010-05-30 4:35 ` Joonyoung Shim
2010-06-03 1:00 ` Ben Dooks [this message]
2010-06-03 1:00 ` Ben Dooks
2010-06-03 4:47 ` Joonyoung Shim
2010-06-03 4:47 ` Joonyoung Shim
2010-06-07 7:30 ` Marek Szyprowski
2010-06-07 7:30 ` Marek Szyprowski
2010-05-30 3:42 ` [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support Marek Vasut
2010-05-30 3:42 ` Marek Vasut
2010-05-30 4:46 ` Jassi Brar
2010-05-30 4:46 ` Jassi Brar
2010-05-30 4:51 ` Ben Dooks
2010-05-30 4:51 ` Ben Dooks
2010-05-30 5:04 ` Jassi Brar
2010-05-30 5:04 ` Jassi Brar
2010-05-30 5:21 ` Ben Dooks
2010-05-30 5:21 ` Ben Dooks
2010-05-31 9:44 ` Mark Brown
2010-05-31 9:44 ` Mark Brown
2010-05-30 8:52 ` Dmitry Torokhov
2010-05-30 8:52 ` Dmitry Torokhov
2010-05-31 1:14 ` Joonyoung Shim
2010-05-31 1:14 ` Joonyoung Shim
2010-05-31 0:06 ` Kukjin Kim
2010-05-31 0:06 ` Kukjin Kim
2010-05-31 0:15 ` Marek Vasut
2010-05-31 0:15 ` Marek Vasut
2010-05-31 1:09 ` Joonyoung Shim
2010-05-31 1:09 ` Joonyoung Shim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100603010025.GA14272@trinity.fluff.org \
--to=ben-linux@fluff.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.