[V2 1/3] mxc: Add support for the imx51 3-stack board

[s.hauer@pengutronix.de (Sascha Hauer)]

On Thu, Jun 03, 2010 at 03:39:08PM +0300, Amit Kucheria wrote:
> Two comments inline.
> 
> On 10 Jun 03, Jason Wang wrote:
> > 3-stack is a reference board from Freescale for their i.MX51 SoC.
> > 
> > Add board definition, Kconfig and Makefile to enable Freescale 3-stack
> > board.
> > 
> > Boot tested on a i.MX51 3-stack Rev2.0 board
> > 
> > Signed-off-by: Jason Wang <jason77.wang@gmail.com>
> > ---
> >  arch/arm/mach-mx5/Kconfig                       |    5 +
> >  arch/arm/mach-mx5/Makefile                      |    2 +-
> >  arch/arm/mach-mx5/board-mx51_3ds.c              |  263 +++++++++++++++++++++++
> >  arch/arm/plat-mxc/include/mach/board-mx51_3ds.h |   70 ++++++
> >  arch/arm/plat-mxc/include/mach/iomux-mx51.h     |   10 +-
> >  5 files changed, 345 insertions(+), 5 deletions(-)
> >  create mode 100644 arch/arm/mach-mx5/board-mx51_3ds.c
> >  create mode 100644 arch/arm/plat-mxc/include/mach/board-mx51_3ds.h
> > 
> > diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
> > index 1576d51..6d45f44 100644
> > --- a/arch/arm/mach-mx5/Kconfig
> > +++ b/arch/arm/mach-mx5/Kconfig
> > @@ -15,4 +15,9 @@ config MACH_MX51_BABBAGE
> >  	  u-boot. This includes specific configurations for the board and its
> >  	  peripherals.
> >  
> > +config MACH_MX51_3DS
> > +	bool "Support MX51PDK (3DS)"
> > +	help
> > +	  Include support for MX51PDK (3DS) platform. This includes specific
> > +	  configurations for the board and its peripherals.
> >  endif
> > diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
> > index bf23f86..c757c59 100644
> > --- a/arch/arm/mach-mx5/Makefile
> > +++ b/arch/arm/mach-mx5/Makefile
> > @@ -6,4 +6,4 @@
> >  obj-y   := cpu.o mm.o clock-mx51.o devices.o
> >  
> >  obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
> > -
> > +obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
> > diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
> > new file mode 100644
> > index 0000000..5da90e9
> > --- /dev/null
> > +++ b/arch/arm/mach-mx5/board-mx51_3ds.c
> > @@ -0,0 +1,263 @@
> > +/*
> > + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
> > + * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> > +#include <linux/io.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/gpio.h>
> > +#include <linux/smsc911x.h>
> > +
> > +#include <asm/mach-types.h>
> > +#include <asm/mach/arch.h>
> > +#include <asm/mach/time.h>
> > +
> > +#include <mach/hardware.h>
> > +#include <mach/common.h>
> > +#include <mach/iomux-mx51.h>
> > +#include <mach/board-mx51_3ds.h>
> > +#include <mach/imx-uart.h>
> > +
> > +#include "devices.h"
> > +
> > +static void __iomem *brd_io;
> > +
> > +static void expio_ack_irq(u32 irq);
> > +
> > +static struct pad_desc mx51_3ds_pads[] = {
> > +	/* UART1 */
> > +	MX51_PAD_UART1_RXD__UART1_RXD,
> > +	MX51_PAD_UART1_TXD__UART1_TXD,
> > +	MX51_PAD_UART1_RTS__UART1_RTS,
> > +	MX51_PAD_UART1_CTS__UART1_CTS,
> > +
> > +	/* UART2 */
> > +	MX51_PAD_UART2_RXD__UART2_RXD,
> > +	MX51_PAD_UART2_TXD__UART2_TXD,
> > +	MX51_PAD_EIM_D25__UART2_CTS,
> > +	MX51_PAD_EIM_D26__UART2_RTS,
> > +
> > +	/* UART3 */
> > +	MX51_PAD_GPIO_1_22__UART3_RXD,
> > +	MX51_PAD_GPIO_1_23__UART3_TXD,
> > +	MX51_PAD_EIM_D24__UART3_CTS,
> > +	MX51_PAD_EIM_D27__UART3_RTS,
> > +
> > +	/* CPLD PARENT IRQ PIN */
> > +	MX51_PAD_GPIO_1_6__GPIO1_6,
> > +};
> > +
> > +
> > +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
> > +static struct resource smsc911x_resources[] = {
> > +	{
> > +		.start = LAN9217_BASE_ADDR,
> > +		.end = LAN9217_BASE_ADDR + 0x100 - 1,
> > +		.flags = IORESOURCE_MEM,
> > +	} , {
> > +		.start = EXPIO_INT_ENET,
> > +		.end = EXPIO_INT_ENET,
> > +		.flags = IORESOURCE_IRQ,
> > +	},
> > +};
> > +
> > +struct smsc911x_platform_config smsc911x_config = {
> > +	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
> > +	.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
> > +};
> > +
> > +static struct platform_device smsc_lan9217_device = {
> > +	.name = "smsc911x",
> > +	.id = 0,
> > +	.dev = {
> > +		.platform_data = &smsc911x_config,
> > +	},
> > +	.num_resources = ARRAY_SIZE(smsc911x_resources),
> > +	.resource = smsc911x_resources,
> > +};
> 
> You forgot to move this platform_device to devices.c

No, devices.c is the place for the i.MX51 integrated peripherals, not
for externally conntected peripherals.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |