From: jason77.wang@gmail.com (jason)
To: linux-arm-kernel@lists.infradead.org
Subject: [V2 1/3] mxc: Add support for the imx51 3-stack board
Date: Thu, 03 Jun 2010 22:39:42 +0800 [thread overview]
Message-ID: <4C07BEAE.7020205@gmail.com> (raw)
In-Reply-To: <20100603123908.GB3527@matterhorn.lan>
Amit Kucheria wrote:
> Two comments inline.
>
> On 10 Jun 03, Jason Wang wrote:
>
>> 3-stack is a reference board from Freescale for their i.MX51 SoC.
>>
>> Add board definition, Kconfig and Makefile to enable Freescale 3-stack
>> board.
>>
>> Boot tested on a i.MX51 3-stack Rev2.0 board
>>
>> Signed-off-by: Jason Wang <jason77.wang@gmail.com>
>> ---
>> arch/arm/mach-mx5/Kconfig | 5 +
>> arch/arm/mach-mx5/Makefile | 2 +-
>> arch/arm/mach-mx5/board-mx51_3ds.c | 263 +++++++++++++++++++++++
>> arch/arm/plat-mxc/include/mach/board-mx51_3ds.h | 70 ++++++
>> arch/arm/plat-mxc/include/mach/iomux-mx51.h | 10 +-
>> 5 files changed, 345 insertions(+), 5 deletions(-)
>> create mode 100644 arch/arm/mach-mx5/board-mx51_3ds.c
>> create mode 100644 arch/arm/plat-mxc/include/mach/board-mx51_3ds.h
>>
>>
>>
<snip>
>> diff --git a/arch/arm/plat-mxc/include/mach/board-mx51_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx51_3ds.h
>> new file mode 100644
>> index 0000000..035f7bc
>> --- /dev/null
>> +++ b/arch/arm/plat-mxc/include/mach/board-mx51_3ds.h
>> @@ -0,0 +1,70 @@
>> +/*
>> + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
>> + *
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +#ifndef __ASM_ARCH_MXC_BOARD_MX51_3DS_H__
>> +#define __ASM_ARCH_MXC_BOARD_MX51_3DS_H__
>> +
>> +/*
>> + * @file plat-mxc/include/mach/board-mx51_3ds.h
>> + *
>> + * @brief This file contains all the board level configuration options.
>>
>
> Remove this @file, @brief.
>
>
OK, i will fix it in V3.
Thanks,
Jason.
>> + * It currently hold the options defined for MX51 3Stack Platform.
>> + *
>> + */
>> +
>> +#define DEBUG_BOARD_BASE_ADDRESS MX51_CS5_BASE_ADDR
>>
>
<snip>
next prev parent reply other threads:[~2010-06-03 14:39 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-03 12:05 [V2 0/3]Add i.MX51 3-stack board support Jason Wang
2010-06-03 12:05 ` [V2 1/3] mxc: Add support for the imx51 3-stack board Jason Wang
2010-06-03 12:05 ` [V2 2/3] mxc/iomux: add GPIO bank offset for iomux v3 platforms Jason Wang
2010-06-03 12:05 ` [V2 3/3] mx51/keypad: add keypad support for i.MX51 platforms Jason Wang
2010-06-05 9:35 ` Alberto Panizzo
2010-06-05 14:13 ` jason
2010-06-06 18:11 ` Alberto Panizzo
2010-06-07 23:22 ` jason
2010-06-03 12:39 ` [V2 1/3] mxc: Add support for the imx51 3-stack board Amit Kucheria
2010-06-03 13:57 ` Sascha Hauer
2010-06-03 14:35 ` Amit Kucheria
2010-06-03 14:36 ` jason
2010-06-03 14:39 ` jason [this message]
2010-06-04 8:53 ` Sascha Hauer
2010-06-04 9:48 ` Alberto Panizzo
2010-06-04 15:22 ` Sascha Hauer
2010-06-04 10:53 ` Amit Kucheria
2010-06-04 14:09 ` [PATCH] mxc: Fix pad names for imx51 Amit Kucheria
2010-06-07 20:41 ` Troy Kisky
2010-06-07 21:04 ` Amit Kucheria
2010-06-07 21:15 ` Troy Kisky
2010-06-08 6:30 ` Sascha Hauer
2010-06-09 13:09 ` Amit Kucheria
2010-06-10 11:49 ` Sascha Hauer
2010-06-10 13:04 ` jason
2010-06-10 13:59 ` Sascha Hauer
2010-06-10 19:24 ` Amit Kucheria
2010-06-04 12:50 ` [V2 1/3] mxc: Add support for the imx51 3-stack board jason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C07BEAE.7020205@gmail.com \
--to=jason77.wang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.