From: Anton Vorontsov <cbouatmailru@gmail.com>
To: Roy Zang <tie-fei.zang@freescale.com>
Cc: linux-mmc@vger.kernel.org, linuxppc-dev@ozlabs.org,
akpm@linux-foundation.org
Subject: Re: [PATCH 3/3 v2] dts: Add ESDHC weird voltage bits workaround
Date: Mon, 9 Aug 2010 21:33:20 +0400 [thread overview]
Message-ID: <20100809173320.GA7665@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <1280805072-26112-3-git-send-email-tie-fei.zang@freescale.com>
On Tue, Aug 03, 2010 at 11:11:12AM +0800, Roy Zang wrote:
> P4080 ESDHC controller does not support 1.8V and 3.0V voltage. but the
> host controller capabilities register wrongly set the bits.
> This patch adds the workaround to correct the weird voltage setting bits.
> Only 3.3V voltage is supported for P4080 ESDHC controller.
>
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Btw, where is implementation for the voltage-ranges handling?
> ---
> arch/powerpc/boot/dts/p4080ds.dts | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
> index efa0091..2f0de24 100644
> --- a/arch/powerpc/boot/dts/p4080ds.dts
> +++ b/arch/powerpc/boot/dts/p4080ds.dts
> @@ -280,6 +280,7 @@
> reg = <0x114000 0x1000>;
> interrupts = <48 2>;
> interrupt-parent = <&mpic>;
> + voltage-ranges = <3300 3300>;
> sdhci,auto-cmd12;
> };
>
> --
> 1.5.6.5
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <cbouatmailru@gmail.com>
To: Roy Zang <tie-fei.zang@freescale.com>
Cc: linuxppc-dev@ozlabs.org, akpm@linux-foundation.org,
linux-mmc@vger.kernel.org
Subject: Re: [PATCH 3/3 v2] dts: Add ESDHC weird voltage bits workaround
Date: Mon, 9 Aug 2010 21:33:20 +0400 [thread overview]
Message-ID: <20100809173320.GA7665@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <1280805072-26112-3-git-send-email-tie-fei.zang@freescale.com>
On Tue, Aug 03, 2010 at 11:11:12AM +0800, Roy Zang wrote:
> P4080 ESDHC controller does not support 1.8V and 3.0V voltage. but the
> host controller capabilities register wrongly set the bits.
> This patch adds the workaround to correct the weird voltage setting bits.
> Only 3.3V voltage is supported for P4080 ESDHC controller.
>
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Btw, where is implementation for the voltage-ranges handling?
> ---
> arch/powerpc/boot/dts/p4080ds.dts | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
> index efa0091..2f0de24 100644
> --- a/arch/powerpc/boot/dts/p4080ds.dts
> +++ b/arch/powerpc/boot/dts/p4080ds.dts
> @@ -280,6 +280,7 @@
> reg = <0x114000 0x1000>;
> interrupts = <48 2>;
> interrupt-parent = <&mpic>;
> + voltage-ranges = <3300 3300>;
> sdhci,auto-cmd12;
> };
>
> --
> 1.5.6.5
next prev parent reply other threads:[~2010-08-09 17:33 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-03 3:11 [PATCH 1/3 v2] sdhci: Add auto CMD12 support for eSDHC driver Roy Zang
2010-08-03 3:11 ` [PATCH 2/3 v2] dts: Add sdhci,auto-cmd12 field for p4080 device tree Roy Zang
2010-08-03 3:11 ` [PATCH 3/3 v2] dts: Add ESDHC weird voltage bits workaround Roy Zang
2010-08-09 17:33 ` Anton Vorontsov [this message]
2010-08-09 17:33 ` Anton Vorontsov
2010-08-05 0:08 ` [PATCH 2/3 v2] dts: Add sdhci,auto-cmd12 field for p4080 device tree Grant Likely
2010-08-05 0:08 ` [PATCH 2/3 v2] dts: Add sdhci, auto-cmd12 " Grant Likely
2010-08-09 17:36 ` [PATCH 2/3 v2] dts: Add sdhci,auto-cmd12 " Anton Vorontsov
2010-08-09 17:36 ` Anton Vorontsov
2010-08-03 23:43 ` [PATCH 1/3 v2] sdhci: Add auto CMD12 support for eSDHC driver Andrew Morton
2010-08-03 23:43 ` Andrew Morton
2010-08-04 2:57 ` Zang Roy-R61911
2010-08-04 2:57 ` Zang Roy-R61911
2010-08-05 1:02 ` Grant Likely
2010-08-05 1:02 ` Grant Likely
2010-08-05 2:14 ` Zang Roy-R61911
2010-08-05 2:14 ` Zang Roy-R61911
2010-08-09 5:50 ` Grant Likely
2010-08-09 5:50 ` Grant Likely
2010-08-09 17:43 ` Anton Vorontsov
2010-08-09 17:43 ` Anton Vorontsov
2010-08-10 10:04 ` Zang Roy-R61911
2010-08-10 10:04 ` Zang Roy-R61911
2010-08-10 9:47 ` Zang Roy-R61911
2010-08-10 9:47 ` Zang Roy-R61911
2010-08-09 18:24 ` Michał Mirosław
2010-08-09 18:24 ` Michał Mirosław
2010-08-10 10:07 ` Zang Roy-R61911
2010-08-10 10:07 ` Zang Roy-R61911
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100809173320.GA7665@oksana.dev.rtsoft.ru \
--to=cbouatmailru@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=tie-fei.zang@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.