Re: [PATCH 2/3 v2] dts: Add sdhci,auto-cmd12 field for p4080 device tree

[Anton Vorontsov <cbouatmailru@gmail.com>]

On Tue, Aug 03, 2010 at 11:11:11AM +0800, Roy Zang wrote:
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> ---
>  Documentation/powerpc/dts-bindings/fsl/esdhc.txt |    2 ++
>  arch/powerpc/boot/dts/p4080ds.dts                |    1 +
>  2 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> index 8a00407..64bcb8b 100644
> --- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> +++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> @@ -14,6 +14,8 @@ Required properties:
>      reports inverted write-protect state;
>    - sdhci,1-bit-only : (optional) specifies that a controller can
>      only handle 1-bit data transfers.
> +  - sdhci,auto-cmd12: (optional) specifies that a controller can
> +    only handle auto CMD12.

Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>

>  Example:
>  
> diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
> index 6b29eab..efa0091 100644
> --- a/arch/powerpc/boot/dts/p4080ds.dts
> +++ b/arch/powerpc/boot/dts/p4080ds.dts
> @@ -280,6 +280,7 @@
>  			reg = <0x114000 0x1000>;
>  			interrupts = <48 2>;
>  			interrupt-parent = <&mpic>;
> +			sdhci,auto-cmd12;
>  		};
>  
>  		i2c@118000 {

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2