* [PATCH v3] AT91: Add flexibity board support @ 2010-09-14 7:58 ` Maxim Osipov 0 siblings, 0 replies; 10+ messages in thread From: Maxim Osipov @ 2010-09-14 7:58 UTC (permalink / raw) To: linux-arm-kernel Hello, Please find updated flexibity board support patch below. Kind regards, Maxim ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3] AT91: Add flexibity board support @ 2010-09-14 7:58 ` Maxim Osipov 0 siblings, 0 replies; 10+ messages in thread From: Maxim Osipov @ 2010-09-14 7:58 UTC (permalink / raw) To: Russell King, Andrew Victor, Nicolas Ferre, Jean-Christophe PLAGNIOL-VILLARD, Antonio R. Costa, Ernst Schwab, Andrew Morton, Maxim Osipov, linux-arm-kernel, linux-kernel Hello, Please find updated flexibity board support patch below. Kind regards, Maxim >From 1fe2aaae2574a4eabda2547ecad0bd0085e3ca3e Mon Sep 17 00:00:00 2001 From: Maxim Osipov <maxim.osipov@gmail.com> Date: Sun, 12 Sep 2010 16:23:48 +0400 Subject: [PATCH] AT91: Add flexibity board support Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> --- arch/arm/mach-at91/Kconfig | 6 ++ arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/board-flexibity.c | 164 ++++++++++++++++++++++++++++++++++ 3 files changed, 171 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-at91/board-flexibity.c diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 939bccd..ca33862 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -248,6 +248,12 @@ config MACH_CPU9260 Select this if you are using a Eukrea Electromatique's CPU9260 Board <http://www.eukrea.com/> +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ca2ac00..7cbe06d 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o +obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c new file mode 100644 index 0000000..216c8ca --- /dev/null +++ b/arch/arm/mach-at91/board-flexibity.c @@ -0,0 +1,164 @@ +/* + * linux/arch/arm/mach-at91/board-flexibity.c + * + * Copyright (C) 2010 Flexibity + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/input.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> + +#include "generic.h" + +static void __init flexibity_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init flexibity_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +/* USB Host port */ +static struct at91_usbh_data __initdata flexibity_usbh_data = { + .ports = 2, +}; + +/* USB Device port */ +static struct at91_udc_data __initdata flexibity_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +/* SPI devices */ +static struct spi_board_info flexibity_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +}; + +/* MCI (SD/MMC) */ +static struct at91_mmc_data __initdata flexibity_mmc_data = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, +}; + +/* LEDs */ +static struct gpio_led flexibity_leds[] = { + { + .name = "usb1:green", + .gpio = AT91_PIN_PA12, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb1:red", + .gpio = AT91_PIN_PA13, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:green", + .gpio = AT91_PIN_PB26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:red", + .gpio = AT91_PIN_PB27, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:green", + .gpio = AT91_PIN_PC8, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:red", + .gpio = AT91_PIN_PC6, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:green", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:red", + .gpio = AT91_PIN_PB5, + .active_low = 1, + .default_trigger = "default-on", + } +}; + +static void __init flexibity_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&flexibity_usbh_data); + /* USB Device */ + at91_add_device_udc(&flexibity_udc_data); + /* SPI */ + at91_add_device_spi(flexibity_spi_devices, + ARRAY_SIZE(flexibity_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &flexibity_mmc_data); + /* LEDs */ + at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); +} + +MACHINE_START(FLEXIBITY, "Flexibity Connect") + /* Maintainer: Maxim Osipov */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = flexibity_map_io, + .init_irq = flexibity_init_irq, + .init_machine = flexibity_board_init, +MACHINE_END -- 1.7.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3] AT91: Add flexibity board support 2010-09-14 7:58 ` Maxim Osipov @ 2010-09-18 1:09 ` Jean-Christophe PLAGNIOL-VILLARD -1 siblings, 0 replies; 10+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-09-18 1:09 UTC (permalink / raw) To: linux-arm-kernel On 11:58 Tue 14 Sep , Maxim Osipov wrote: > Hello, > > Please find updated flexibity board support patch below. > > Kind regards, > Maxim > > >From 1fe2aaae2574a4eabda2547ecad0bd0085e3ca3e Mon Sep 17 00:00:00 2001 > From: Maxim Osipov <maxim.osipov@gmail.com> > Date: Sun, 12 Sep 2010 16:23:48 +0400 > Subject: [PATCH] AT91: Add flexibity board support > > Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Best Regards, J. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] AT91: Add flexibity board support @ 2010-09-18 1:09 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 0 replies; 10+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-09-18 1:09 UTC (permalink / raw) To: Maxim Osipov Cc: Russell King, Andrew Victor, Nicolas Ferre, Antonio R. Costa, Ernst Schwab, Andrew Morton, linux-arm-kernel, linux-kernel On 11:58 Tue 14 Sep , Maxim Osipov wrote: > Hello, > > Please find updated flexibity board support patch below. > > Kind regards, > Maxim > > >From 1fe2aaae2574a4eabda2547ecad0bd0085e3ca3e Mon Sep 17 00:00:00 2001 > From: Maxim Osipov <maxim.osipov@gmail.com> > Date: Sun, 12 Sep 2010 16:23:48 +0400 > Subject: [PATCH] AT91: Add flexibity board support > > Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Best Regards, J. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3] AT91: Add flexibity board support 2010-09-18 1:09 ` Jean-Christophe PLAGNIOL-VILLARD @ 2010-09-20 16:40 ` Jean-Christophe PLAGNIOL-VILLARD -1 siblings, 0 replies; 10+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-09-20 16:40 UTC (permalink / raw) To: linux-arm-kernel On 03:09 Sat 18 Sep , Jean-Christophe PLAGNIOL-VILLARD wrote: > On 11:58 Tue 14 Sep , Maxim Osipov wrote: > > Hello, > > > > Please find updated flexibity board support patch below. > > > > Kind regards, > > Maxim > > > > >From 1fe2aaae2574a4eabda2547ecad0bd0085e3ca3e Mon Sep 17 00:00:00 2001 > > From: Maxim Osipov <maxim.osipov@gmail.com> > > Date: Sun, 12 Sep 2010 16:23:48 +0400 > > Subject: [PATCH] AT91: Add flexibity board support > > > > Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> when you add it to the patch tracker please add the ACK & co to be able to trac who ack itor test it in the git history Best Regards, J. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] AT91: Add flexibity board support @ 2010-09-20 16:40 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 0 replies; 10+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-09-20 16:40 UTC (permalink / raw) To: Maxim Osipov Cc: Russell King, Antonio R. Costa, Nicolas Ferre, linux-kernel, Ernst Schwab, Andrew Morton, Andrew Victor, linux-arm-kernel On 03:09 Sat 18 Sep , Jean-Christophe PLAGNIOL-VILLARD wrote: > On 11:58 Tue 14 Sep , Maxim Osipov wrote: > > Hello, > > > > Please find updated flexibity board support patch below. > > > > Kind regards, > > Maxim > > > > >From 1fe2aaae2574a4eabda2547ecad0bd0085e3ca3e Mon Sep 17 00:00:00 2001 > > From: Maxim Osipov <maxim.osipov@gmail.com> > > Date: Sun, 12 Sep 2010 16:23:48 +0400 > > Subject: [PATCH] AT91: Add flexibity board support > > > > Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> when you add it to the patch tracker please add the ACK & co to be able to trac who ack itor test it in the git history Best Regards, J. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3] AT91: Add flexibity board support 2010-09-14 7:58 ` Maxim Osipov @ 2010-09-21 6:42 ` avictor.za -1 siblings, 0 replies; 10+ messages in thread From: avictor.za at gmail.com @ 2010-09-21 6:42 UTC (permalink / raw) To: linux-arm-kernel hi Maxim, > Subject: [PATCH] AT91: Add flexibity board support [Please add a description of the patch here] > Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Please submit the patch to Russell King's patch-tracking system. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] AT91: Add flexibity board support @ 2010-09-21 6:42 ` avictor.za 0 siblings, 0 replies; 10+ messages in thread From: avictor.za @ 2010-09-21 6:42 UTC (permalink / raw) To: Maxim Osipov Cc: Russell King, Andrew Victor, Nicolas Ferre, Jean-Christophe PLAGNIOL-VILLARD, Antonio R. Costa, Ernst Schwab, Andrew Morton, linux-arm-kernel, linux-kernel hi Maxim, > Subject: [PATCH] AT91: Add flexibity board support [Please add a description of the patch here] > Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Please submit the patch to Russell King's patch-tracking system. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3] AT91: Add flexibity board support 2010-09-21 6:42 ` avictor.za @ 2010-09-21 6:48 ` Maxim Osipov -1 siblings, 0 replies; 10+ messages in thread From: Maxim Osipov @ 2010-09-21 6:48 UTC (permalink / raw) To: linux-arm-kernel On Tue, Sep 21, 2010 at 10:42 AM, avictor.za at gmail.com <avictor.za@gmail.com> wrote: > hi Maxim, > >> Subject: [PATCH] AT91: Add flexibity board support > Acked-by: Andrew Victor <linux@maxim.org.za> > > Please submit the patch to Russell King's patch-tracking system. > Thank you. It is already in Incoming of patch-tracking system. I will add your ack there. Kind regards, Maxim ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] AT91: Add flexibity board support @ 2010-09-21 6:48 ` Maxim Osipov 0 siblings, 0 replies; 10+ messages in thread From: Maxim Osipov @ 2010-09-21 6:48 UTC (permalink / raw) To: avictor.za@gmail.com Cc: Russell King, Andrew Victor, Nicolas Ferre, Jean-Christophe PLAGNIOL-VILLARD, Antonio R. Costa, Ernst Schwab, Andrew Morton, linux-arm-kernel, linux-kernel On Tue, Sep 21, 2010 at 10:42 AM, avictor.za@gmail.com <avictor.za@gmail.com> wrote: > hi Maxim, > >> Subject: [PATCH] AT91: Add flexibity board support > Acked-by: Andrew Victor <linux@maxim.org.za> > > Please submit the patch to Russell King's patch-tracking system. > Thank you. It is already in Incoming of patch-tracking system. I will add your ack there. Kind regards, Maxim ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-09-21 6:48 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-09-14 7:58 [PATCH v3] AT91: Add flexibity board support Maxim Osipov 2010-09-14 7:58 ` Maxim Osipov 2010-09-18 1:09 ` Jean-Christophe PLAGNIOL-VILLARD 2010-09-18 1:09 ` Jean-Christophe PLAGNIOL-VILLARD 2010-09-20 16:40 ` Jean-Christophe PLAGNIOL-VILLARD 2010-09-20 16:40 ` Jean-Christophe PLAGNIOL-VILLARD 2010-09-21 6:42 ` avictor.za at gmail.com 2010-09-21 6:42 ` avictor.za 2010-09-21 6:48 ` Maxim Osipov 2010-09-21 6:48 ` Maxim Osipov
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.