* [PATCH] sh: sh7366 Enable SDIO IRQs
@ 2011-01-06 11:12 Magnus Damm
0 siblings, 0 replies; only message in thread
From: Magnus Damm @ 2011-01-06 11:12 UTC (permalink / raw)
To: linux-sh
From: Magnus Damm <damm@opensource.se>
This patch enables interrupt generation for SDIO IRQs
of the SDHI block on the sh7366 processor. Use together
with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and
with the MMC_CAP_SDIO_IRQ flag in the board code.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
--- 0011/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7366.c 2011-01-06 20:07:10.000000000 +0900
@@ -324,6 +324,8 @@ void __init sh7366_mem_init(void)
enum {
UNUSED=0,
+ ENABLED,
+ DISABLED,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -337,14 +339,13 @@ enum {
DENC, MSIOF,
FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- SDHI0, SDHI1, SDHI2, SDHI3,
- CMT, TSIF, SIU,
+ SDHI, CMT, TSIF, SIU,
TMU0, TMU1, TMU2,
VEU2, LCDC,
/* interrupt groups */
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, SDHI,
+ DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C,
};
static struct intc_vect vectors[] __initdata = {
@@ -369,8 +370,8 @@ static struct intc_vect vectors[] __init
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
- INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+ INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+ INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
@@ -386,7 +387,6 @@ static struct intc_group groups[] __init
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
- INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
@@ -408,7 +408,7 @@ static struct intc_mask_reg mask_registe
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+ { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB, } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@@ -446,9 +446,13 @@ static struct intc_mask_reg ack_register
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
- mask_registers, prio_registers, sense_registers,
- ack_registers);
+static struct intc_desc intc_desc __initdata = {
+ .name = "sh7366",
+ .force_enable = ENABLED,
+ .force_disable = DISABLED,
+ .hw = INTC_HW_DESC(vectors, groups, mask_registers,
+ prio_registers, sense_registers, ack_registers),
+};
void __init plat_irq_setup(void)
{
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-01-06 11:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-06 11:12 [PATCH] sh: sh7366 Enable SDIO IRQs Magnus Damm
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.