From: Roman Mamedov <rm@romanrm.ru>
To: "Keld Jørn Simonsen" <keld@keldix.com>
Cc: Drew <drew.kay@gmail.com>,
hansbkk@gmail.com, David Brown <david@westcontrol.com>,
linux-raid@vger.kernel.org
Subject: Re: What's the typical RAID10 setup?
Date: Sun, 6 Feb 2011 17:03:19 +0500 [thread overview]
Message-ID: <20110206170319.66306ed5@natsu> (raw)
In-Reply-To: <20110206075816.GA32205@www2.open-std.org>
[-- Attachment #1: Type: text/plain, Size: 930 bytes --]
On Sun, 6 Feb 2011 08:58:16 +0100
Keld Jørn Simonsen <keld@keldix.com> wrote:
> On Sat, Feb 05, 2011 at 08:02:02PM -0800, Drew wrote:
> > > If you want to investigate further, here are the main brands, I
> > > imagine most are running on Linux/mdadm-based firmware:
> > >
> > > Thecus, Qnap, Synology, Dlink, Buffalo, NetGear (was Infrant)
> >
> > I can confirm Buffalo & QNAP are both Linux based. Neither support
> > RAID 10, just 0, 1, 5, and in the QNAP's case, 6.
>
> Do they have a ssh mode, where you can log in and do as you please?
Most likely not in the stock configuration, but on some devices you can
replace the original firmware with something more advanced. For example, I
have installed complete Debian Squeeze on my D-Link DNS-323 box, following
these instructions: http://www.cyrius.com/debian/orion/d-link/dns-323/
It has a 500 MHz ARM CPU and 64 MB of RAM.
--
With respect,
Roman
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2011-02-06 12:03 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 9:41 What's the typical RAID10 setup? Mathias Burén
2011-01-31 10:14 ` Robin Hill
2011-01-31 10:22 ` Mathias Burén
2011-01-31 10:36 ` CoolCold
2011-01-31 15:00 ` Roberto Spadim
2011-01-31 15:21 ` Robin Hill
2011-01-31 15:27 ` Roberto Spadim
2011-01-31 15:28 ` Roberto Spadim
2011-01-31 15:32 ` Roberto Spadim
2011-01-31 15:34 ` Roberto Spadim
2011-01-31 15:37 ` Roberto Spadim
2011-01-31 15:45 ` Robin Hill
2011-01-31 16:55 ` Denis
2011-01-31 17:31 ` Roberto Spadim
2011-01-31 18:35 ` Denis
2011-01-31 19:15 ` Roberto Spadim
2011-01-31 19:28 ` Keld Jørn Simonsen
2011-01-31 19:35 ` Roberto Spadim
2011-01-31 19:37 ` Roberto Spadim
2011-01-31 20:22 ` Keld Jørn Simonsen
2011-01-31 20:17 ` Stan Hoeppner
2011-01-31 20:37 ` Keld Jørn Simonsen
2011-01-31 21:20 ` Roberto Spadim
2011-01-31 21:24 ` Mathias Burén
2011-01-31 21:27 ` Jon Nelson
2011-01-31 21:47 ` Roberto Spadim
2011-01-31 21:51 ` Roberto Spadim
2011-01-31 22:50 ` NeilBrown
2011-01-31 22:53 ` Roberto Spadim
2011-01-31 23:10 ` NeilBrown
2011-01-31 23:14 ` Roberto Spadim
2011-01-31 22:52 ` Keld Jørn Simonsen
2011-01-31 23:00 ` Roberto Spadim
2011-02-01 10:01 ` David Brown
2011-02-01 13:50 ` Jon Nelson
2011-02-01 14:25 ` Roberto Spadim
2011-02-01 14:48 ` David Brown
2011-02-01 15:41 ` Roberto Spadim
2011-02-03 3:36 ` Drew
2011-02-03 8:18 ` Stan Hoeppner
[not found] ` <AANLkTikerSZfhMbkEvGBVyLB=wHDSHLWszoEz5As5Hi4@mail.gmail.com>
[not found] ` <AANLkTikLyR206x4aMy+veNkWPV67uF9r5dZKGqXJUEqN@mail.gmail.com>
2011-02-03 14:35 ` Roberto Spadim
2011-02-03 15:43 ` Keld Jørn Simonsen
2011-02-03 15:50 ` Roberto Spadim
2011-02-03 15:54 ` Roberto Spadim
2011-02-03 16:02 ` Keld Jørn Simonsen
2011-02-03 16:07 ` Roberto Spadim
2011-02-03 16:16 ` Roberto Spadim
2011-02-01 22:05 ` Stan Hoeppner
2011-02-01 23:12 ` Roberto Spadim
2011-02-02 9:25 ` Robin Hill
2011-02-02 16:00 ` Roberto Spadim
2011-02-02 16:06 ` Roberto Spadim
2011-02-02 16:07 ` Roberto Spadim
2011-02-02 16:10 ` Roberto Spadim
2011-02-02 16:13 ` Roberto Spadim
2011-02-02 19:44 ` Keld Jørn Simonsen
2011-02-02 20:28 ` Roberto Spadim
2011-02-02 21:31 ` Roberto Spadim
2011-02-02 22:13 ` Keld Jørn Simonsen
2011-02-02 22:26 ` Roberto Spadim
2011-02-03 1:57 ` Roberto Spadim
2011-02-03 3:05 ` Stan Hoeppner
2011-02-03 3:13 ` Roberto Spadim
2011-02-03 3:17 ` Roberto Spadim
2011-02-01 23:35 ` Keld Jørn Simonsen
2011-02-01 16:02 ` Keld Jørn Simonsen
2011-02-01 16:24 ` Roberto Spadim
2011-02-01 17:56 ` Keld Jørn Simonsen
2011-02-01 18:09 ` Roberto Spadim
2011-02-01 20:16 ` Keld Jørn Simonsen
2011-02-01 20:32 ` Keld Jørn Simonsen
2011-02-01 20:58 ` Roberto Spadim
2011-02-01 21:04 ` Roberto Spadim
2011-02-01 21:18 ` David Brown
2011-02-01 0:58 ` Stan Hoeppner
2011-02-01 12:50 ` Roman Mamedov
2011-02-03 11:04 ` Keld Jørn Simonsen
2011-02-03 14:17 ` Roberto Spadim
2011-02-03 15:54 ` Keld Jørn Simonsen
2011-02-03 18:39 ` Keld Jørn Simonsen
2011-02-03 18:41 ` Roberto Spadim
2011-02-03 23:43 ` Stan Hoeppner
2011-02-04 3:49 ` hansbkk
2011-02-04 7:06 ` Keld Jørn Simonsen
2011-02-04 8:27 ` Stan Hoeppner
2011-02-04 9:06 ` Keld Jørn Simonsen
2011-02-04 10:04 ` Stan Hoeppner
2011-02-04 11:15 ` hansbkk
2011-02-04 13:33 ` Keld Jørn Simonsen
2011-02-04 20:35 ` Keld Jørn Simonsen
2011-02-04 20:42 ` Keld Jørn Simonsen
2011-02-04 21:15 ` Stan Hoeppner
2011-02-04 22:05 ` Keld Jørn Simonsen
2011-02-04 23:03 ` Stan Hoeppner
2011-02-06 3:59 ` Drew
2011-02-06 4:27 ` Stan Hoeppner
2011-02-04 11:34 ` David Brown
2011-02-04 13:53 ` Keld Jørn Simonsen
2011-02-04 14:17 ` David Brown
2011-02-04 14:21 ` hansbkk
2011-02-06 4:02 ` Drew
2011-02-06 7:58 ` Keld Jørn Simonsen
2011-02-06 12:03 ` Roman Mamedov [this message]
2011-02-06 14:30 ` Roberto Spadim
2011-02-01 8:46 ` hansbkk
2011-01-31 19:37 ` Phillip Susi
2011-01-31 19:41 ` Roberto Spadim
2011-01-31 19:46 ` Phillip Susi
2011-01-31 19:53 ` Roberto Spadim
2011-01-31 22:10 ` Phillip Susi
2011-01-31 22:14 ` Denis
2011-01-31 22:33 ` Roberto Spadim
2011-01-31 22:36 ` Roberto Spadim
2011-01-31 20:23 ` Stan Hoeppner
2011-01-31 21:59 ` Phillip Susi
2011-01-31 22:08 ` Jon Nelson
2011-01-31 22:38 ` Phillip Susi
2011-02-01 10:05 ` David Brown
2011-02-01 9:20 ` Robin Hill
2011-02-04 16:03 ` Phillip Susi
2011-02-04 16:22 ` Robin Hill
2011-02-04 20:35 ` [OT] " Phil Turmel
2011-02-04 20:35 ` Phillip Susi
2011-02-04 21:05 ` Stan Hoeppner
2011-02-04 21:13 ` Roberto Spadim
2011-01-31 15:30 ` Robin Hill
2011-01-31 20:07 ` Stan Hoeppner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110206170319.66306ed5@natsu \
--to=rm@romanrm.ru \
--cc=david@westcontrol.com \
--cc=drew.kay@gmail.com \
--cc=hansbkk@gmail.com \
--cc=keld@keldix.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.