[PATCH] bond_3ad.c: switch MAC_ADDRESS_COMPARE macro for

[Rafael Aquini <aquini@linux.com>]

Converts all uses of MAC_ADDRESS_COMPARE macro to compare_ether_addr() and delete the macro.

Signed-off-by: Rafael Aquini <aquini@linux.com>
---
 drivers/net/bonding/bond_3ad.c |   26 ++++++++++++++------------
 1 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index c7537abc..c2e0d66 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -90,9 +90,6 @@
 #define     AD_LINK_SPEED_BITMASK_10000MBPS   0x10
 //endalloun
 
-// compare MAC addresses
-#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN)
-
 static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } };
 static u16 ad_ticks_per_sec;
 static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
@@ -469,7 +466,7 @@ static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
 	// check if all parameters are alike
 	if (((ntohs(lacpdu->partner_port) = port->actor_port_number) &&
 	     (ntohs(lacpdu->partner_port_priority) = port->actor_port_priority) &&
-	     !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
+	     !compare_ether_addr((const u8 *)&(lacpdu->partner_system), (const u8 *)&(port->actor_system)) &&
 	     (ntohs(lacpdu->partner_system_priority) = port->actor_system_priority) &&
 	     (ntohs(lacpdu->partner_key) = port->actor_oper_port_key) &&
 	     ((lacpdu->partner_state & AD_STATE_AGGREGATION) = (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
@@ -559,7 +556,8 @@ static void __update_selected(struct lacpdu *lacpdu, struct port *port)
 		// check if any parameter is different
 		if (ntohs(lacpdu->actor_port) != partner->port_number ||
 		    ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
-		    MAC_ADDRESS_COMPARE(&lacpdu->actor_system, &partner->system) ||
+		    compare_ether_addr((const u8 *)&lacpdu->actor_system,
+					(const u8 *)&partner->system) ||
 		    ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
 		    ntohs(lacpdu->actor_key) != partner->key ||
 		    (lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
@@ -590,7 +588,8 @@ static void __update_default_selected(struct port *port)
 		// check if any parameter is different
 		if (admin->port_number != oper->port_number ||
 		    admin->port_priority != oper->port_priority ||
-		    MAC_ADDRESS_COMPARE(&admin->system, &oper->system) ||
+		    compare_ether_addr((const u8 *)&admin->system,
+					(const u8 *)&oper->system) ||
 		    admin->system_priority != oper->system_priority ||
 		    admin->key != oper->key ||
 		    (admin->port_state & AD_STATE_AGGREGATION)
@@ -620,7 +619,8 @@ static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
 		// check if any parameter is different
 		if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
 		    (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
-		    MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) ||
+		    compare_ether_addr((const u8 *)&(lacpdu->partner_system),
+					(const u8 *)&(port->actor_system)) ||
 		    (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
 		    (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
 		    ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) ||
@@ -1123,7 +1123,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
 			break;
 		case AD_RX_CURRENT:
 			// detect loopback situation
-			if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
+			if (!compare_ether_addr((const u8 *)&(lacpdu->actor_system), (const u8 *)&(port->actor_system))) {
 				// INFO_RECEIVED_LOOPBACK_FRAMES
 				pr_err("%s: An illegal loopback occurred on adapter (%s).\n"
 				       "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
@@ -1331,11 +1331,11 @@ static void ad_port_selection_logic(struct port *port)
 		}
 		// check if current aggregator suits us
 		if (((aggregator->actor_oper_aggregator_key = port->actor_oper_port_key) && // if all parameters match AND
-		     !MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(port->partner_oper.system)) &&
+		     !compare_ether_addr((const u8 *)&(aggregator->partner_system), (const u8 *)&(port->partner_oper.system)) &&
 		     (aggregator->partner_system_priority = port->partner_oper.system_priority) &&
 		     (aggregator->partner_oper_aggregator_key = port->partner_oper.key)
 		    ) &&
-		    ((MAC_ADDRESS_COMPARE(&(port->partner_oper.system), &(null_mac_addr)) && // partner answers
+		    ((compare_ether_addr((const u8 *)&(port->partner_oper.system), (const u8 *)&(null_mac_addr)) && // partner answers
 		      !aggregator->is_individual)  // but is not individual OR
 		    )
 		   ) {
@@ -1751,7 +1751,9 @@ static void ad_enable_collecting_distributing(struct port *port)
  */
 static void ad_disable_collecting_distributing(struct port *port)
 {
-	if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) {
+	if (port->aggregator &&
+	    compare_ether_addr((const u8 *)&(port->aggregator->partner_system),
+				(const u8 *)&(null_mac_addr))) {
 		pr_debug("Disabling port %d(LAG %d)\n",
 			 port->actor_port_number,
 			 port->aggregator->aggregator_identifier);
@@ -1875,7 +1877,7 @@ static u16 aggregator_identifier;
 void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast)
 {
 	// check that the bond is not initialized yet
-	if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
+	if (compare_ether_addr((const u8 *)&(BOND_AD_INFO(bond).system.sys_mac_addr),
 				bond->dev->dev_addr)) {
 
 		aggregator_identifier = 0;
-- 
1.7.4.4


-- 
Rafael Aquini <aquini@linux.com>