All of lore.kernel.org
 help / color / mirror / Atom feed
From: florian@openwrt.org (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ep93xx-eth: convert to phylib
Date: Sun, 5 Jun 2011 19:57:36 +0200	[thread overview]
Message-ID: <201106051957.36492.florian@openwrt.org> (raw)

ep93xx-eth lacked support for monitoring link status changes, with this
patch, link changes are now watched and reported correctly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 39e1c0d..53d075e 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -51,7 +51,7 @@ config ARM_KS8695_ETHER
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
 	depends on ARM && ARCH_EP93XX
-	select MII
+	select PHYLIB
 	help
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
 	  Say Y if you are building a kernel for EP93xx based devices.
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 5a77001..4669b6c 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/phy.h>
 
 #include <mach/hardware.h>
 
@@ -175,7 +176,11 @@ struct ep93xx_priv
 	struct net_device	*dev;
 	struct napi_struct	napi;
 
-	struct mii_if_info	mii;
+	struct mii_bus		*mii_bus;
+	struct phy_device	*phydev;
+	int			old_link;
+	int			old_duplex;
+	unsigned int		phy_addr;
 	u8			mdc_divisor;
 };
 
@@ -186,8 +191,9 @@ struct ep93xx_priv
 #define wrw(ep, off, val)	__raw_writew((val), (ep)->base_addr + (off))
 #define wrl(ep, off, val)	__raw_writel((val), (ep)->base_addr + (off))
 
-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
+static int ep93xx_mdiobus_read(struct mii_bus *bus, int phy_id, int reg)
 {
+	struct net_device *dev = bus->priv;
 	struct ep93xx_priv *ep = netdev_priv(dev);
 	int data;
 	int i;
@@ -210,8 +216,9 @@ static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
 	return data;
 }
 
-static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
+static int ep93xx_mdiobus_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
 {
+	struct net_device *dev = bus->priv;
 	struct ep93xx_priv *ep = netdev_priv(dev);
 	int i;
 
@@ -224,8 +231,84 @@ static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int d
 		msleep(1);
 	}
 
-	if (i == 10)
+	if (i == 10) {
 		pr_info("mdio write timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int ep93xx_mdiobus_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+static void ep93xx_adjust_link(struct net_device *dev)
+{
+	struct ep93xx_priv * ep = netdev_priv(dev);
+	struct phy_device *phydev = ep->phydev;
+	int status_changed = 0;
+
+	BUG_ON(!phydev);
+
+	if (ep->old_link != phydev->link) {
+		status_changed = 1;
+		ep->old_link = phydev->link;
+	}
+
+	if (phydev->link && (ep->old_duplex != phydev->duplex)) {
+		status_changed = 1;
+		ep->old_duplex = phydev->duplex;
+	}
+
+	if (status_changed) {
+		pr_info("%s: link %s", dev->name, phydev->link ?
+			"UP" : "DOWN");
+		if (phydev->link)
+			pr_cont(" - %d/%s", phydev->speed,
+			DUPLEX_FULL == phydev->duplex ? "full" : "half");
+		pr_cont("\n");
+	}
+}
+
+static int ep93xx_mii_probe(struct net_device *dev)
+{
+	struct ep93xx_priv * ep = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+
+	/* use platform supplied PHY address if valid */
+	if (ep->phy_addr)
+		phydev = ep->mii_bus->phy_map[ep->phy_addr];
+	else
+		phydev = phy_find_first(ep->mii_bus);
+
+	if (!phydev) {
+		pr_err("no PHY found\n");
+		return -ENODEV;
+	}
+
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &ep93xx_adjust_link,
+					0, PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phydev)) {
+		pr_err("could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	/* mask with MAC supported features */
+	phydev->supported &= PHY_BASIC_FEATURES;
+	phydev->advertising = phydev->supported;
+	ep->phydev = phydev;
+	ep->old_link = 0;
+	ep->old_duplex = -1;
+
+	pr_info("attached PHY driver [%s] "
+		"(mii_bus:phy_addr=%s)\n",
+		phydev->drv->name, dev_name(&phydev->dev));
+
+	phy_start(phydev);
+
+	return 0;
 }
 
 static int ep93xx_rx(struct net_device *dev, int processed, int budget)
@@ -570,7 +653,7 @@ static int ep93xx_start_hw(struct net_device *dev)
 	wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9));
 
 	/* Does the PHY support preamble suppress?  */
-	if ((ep93xx_mdio_read(dev, ep->mii.phy_id, MII_BMSR) & 0x0040) != 0)
+	if ((ep93xx_mdiobus_read(ep->mii_bus, ep->phy_addr, MII_BMSR) & 0x0040) != 0)
 		wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9) | (1 << 8));
 
 	/* Receive descriptor ring.  */
@@ -703,9 +786,11 @@ static int ep93xx_close(struct net_device *dev)
 static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(ifr);
 
-	return generic_mii_ioctl(&ep->mii, data, cmd, NULL);
+	if (!ep->phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(ep->phydev, ifr, cmd);
 }
 
 static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
@@ -717,25 +802,19 @@ static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *i
 static int ep93xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_ethtool_gset(&ep->mii, cmd);
+	return phy_ethtool_gset(ep->phydev, cmd);
 }
 
 static int ep93xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_ethtool_sset(&ep->mii, cmd);
+	return phy_ethtool_sset(ep->phydev, cmd);
 }
 
 static int ep93xx_nway_reset(struct net_device *dev)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_nway_restart(&ep->mii);
-}
-
-static u32 ep93xx_get_link(struct net_device *dev)
-{
-	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_link_ok(&ep->mii);
+	return phy_start_aneg(ep->phydev);
 }
 
 static const struct ethtool_ops ep93xx_ethtool_ops = {
@@ -743,7 +822,7 @@ static const struct ethtool_ops ep93xx_ethtool_ops = {
 	.get_settings		= ep93xx_get_settings,
 	.set_settings		= ep93xx_set_settings,
 	.nway_reset		= ep93xx_nway_reset,
-	.get_link		= ep93xx_get_link,
+	.get_link		= ethtool_op_get_link,
 };
 
 static const struct net_device_ops ep93xx_netdev_ops = {
@@ -789,6 +868,11 @@ static int ep93xx_eth_remove(struct platform_device *pdev)
 
 	/* @@@ Force down.  */
 	unregister_netdev(dev);
+
+	mdiobus_unregister(ep->mii_bus);
+	kfree(ep->mii_bus->irq);
+	mdiobus_free(ep->mii_bus);
+
 	ep93xx_free_buffers(ep);
 
 	if (ep->base_addr != NULL)
@@ -811,7 +895,8 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 	struct ep93xx_priv *ep;
 	struct resource *mem;
 	int irq;
-	int err;
+	int err = 0;
+	int i;
 
 	if (pdev == NULL)
 		return -ENODEV;
@@ -849,13 +934,41 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 	}
 	ep->irq = irq;
 
-	ep->mii.phy_id = data->phy_id;
-	ep->mii.phy_id_mask = 0x1f;
-	ep->mii.reg_num_mask = 0x1f;
-	ep->mii.dev = dev;
-	ep->mii.mdio_read = ep93xx_mdio_read;
-	ep->mii.mdio_write = ep93xx_mdio_write;
+	ep->mii_bus = mdiobus_alloc();
+	if (!ep->mii_bus) {
+		dev_err(&pdev->dev, "Failed to allocate mdiobus\n");
+		goto err_out;
+	}
+
+	ep->phy_addr = data->phy_id;
+	ep->mii_bus->priv = dev;
+	ep->mii_bus->read = ep93xx_mdiobus_read;
+	ep->mii_bus->write = ep93xx_mdiobus_write;
+	ep->mii_bus->reset = ep93xx_mdiobus_reset;
+	ep->mii_bus->name = "ep93xx_eth_mii";
 	ep->mdc_divisor = 40;	/* Max HCLK 100 MHz, min MDIO clk 2.5 MHz.  */
+	snprintf(ep->mii_bus->id, MII_BUS_ID_SIZE, "%x",
+				(pdev->id != -1) ? pdev->id : 0);
+	ep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!ep->mii_bus->irq) {
+		dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
+		goto err_out;
+	}
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		ep->mii_bus->irq[i] = PHY_POLL;
+
+	err = mdiobus_register(ep->mii_bus);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to register MII bus\n");
+		goto err_out;
+	}
+
+	err = ep93xx_mii_probe(dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to probe MII bus\n");
+		goto err_out;
+	}
 
 	if (is_zero_ether_addr(dev->dev_addr))
 		random_ether_addr(dev->dev_addr);
-- 
1.7.4.1

WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <florian@openwrt.org>
To: netdev@vger.kernel.org, Lennert Buytenhek <kernel@wantstofly.org>,
	Mika Westerberg <mika.westerberg@iki.fi>,
	hsweeten@visionengravers.com, ryan@bluewatersys.com,
	linux-arm-kernel@list
Subject: [PATCH] ep93xx-eth: convert to phylib
Date: Sun, 5 Jun 2011 19:57:36 +0200	[thread overview]
Message-ID: <201106051957.36492.florian@openwrt.org> (raw)

ep93xx-eth lacked support for monitoring link status changes, with this
patch, link changes are now watched and reported correctly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 39e1c0d..53d075e 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -51,7 +51,7 @@ config ARM_KS8695_ETHER
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
 	depends on ARM && ARCH_EP93XX
-	select MII
+	select PHYLIB
 	help
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
 	  Say Y if you are building a kernel for EP93xx based devices.
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 5a77001..4669b6c 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/phy.h>
 
 #include <mach/hardware.h>
 
@@ -175,7 +176,11 @@ struct ep93xx_priv
 	struct net_device	*dev;
 	struct napi_struct	napi;
 
-	struct mii_if_info	mii;
+	struct mii_bus		*mii_bus;
+	struct phy_device	*phydev;
+	int			old_link;
+	int			old_duplex;
+	unsigned int		phy_addr;
 	u8			mdc_divisor;
 };
 
@@ -186,8 +191,9 @@ struct ep93xx_priv
 #define wrw(ep, off, val)	__raw_writew((val), (ep)->base_addr + (off))
 #define wrl(ep, off, val)	__raw_writel((val), (ep)->base_addr + (off))
 
-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
+static int ep93xx_mdiobus_read(struct mii_bus *bus, int phy_id, int reg)
 {
+	struct net_device *dev = bus->priv;
 	struct ep93xx_priv *ep = netdev_priv(dev);
 	int data;
 	int i;
@@ -210,8 +216,9 @@ static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
 	return data;
 }
 
-static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
+static int ep93xx_mdiobus_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
 {
+	struct net_device *dev = bus->priv;
 	struct ep93xx_priv *ep = netdev_priv(dev);
 	int i;
 
@@ -224,8 +231,84 @@ static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int d
 		msleep(1);
 	}
 
-	if (i == 10)
+	if (i == 10) {
 		pr_info("mdio write timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int ep93xx_mdiobus_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+static void ep93xx_adjust_link(struct net_device *dev)
+{
+	struct ep93xx_priv * ep = netdev_priv(dev);
+	struct phy_device *phydev = ep->phydev;
+	int status_changed = 0;
+
+	BUG_ON(!phydev);
+
+	if (ep->old_link != phydev->link) {
+		status_changed = 1;
+		ep->old_link = phydev->link;
+	}
+
+	if (phydev->link && (ep->old_duplex != phydev->duplex)) {
+		status_changed = 1;
+		ep->old_duplex = phydev->duplex;
+	}
+
+	if (status_changed) {
+		pr_info("%s: link %s", dev->name, phydev->link ?
+			"UP" : "DOWN");
+		if (phydev->link)
+			pr_cont(" - %d/%s", phydev->speed,
+			DUPLEX_FULL == phydev->duplex ? "full" : "half");
+		pr_cont("\n");
+	}
+}
+
+static int ep93xx_mii_probe(struct net_device *dev)
+{
+	struct ep93xx_priv * ep = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+
+	/* use platform supplied PHY address if valid */
+	if (ep->phy_addr)
+		phydev = ep->mii_bus->phy_map[ep->phy_addr];
+	else
+		phydev = phy_find_first(ep->mii_bus);
+
+	if (!phydev) {
+		pr_err("no PHY found\n");
+		return -ENODEV;
+	}
+
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &ep93xx_adjust_link,
+					0, PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phydev)) {
+		pr_err("could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	/* mask with MAC supported features */
+	phydev->supported &= PHY_BASIC_FEATURES;
+	phydev->advertising = phydev->supported;
+	ep->phydev = phydev;
+	ep->old_link = 0;
+	ep->old_duplex = -1;
+
+	pr_info("attached PHY driver [%s] "
+		"(mii_bus:phy_addr=%s)\n",
+		phydev->drv->name, dev_name(&phydev->dev));
+
+	phy_start(phydev);
+
+	return 0;
 }
 
 static int ep93xx_rx(struct net_device *dev, int processed, int budget)
@@ -570,7 +653,7 @@ static int ep93xx_start_hw(struct net_device *dev)
 	wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9));
 
 	/* Does the PHY support preamble suppress?  */
-	if ((ep93xx_mdio_read(dev, ep->mii.phy_id, MII_BMSR) & 0x0040) != 0)
+	if ((ep93xx_mdiobus_read(ep->mii_bus, ep->phy_addr, MII_BMSR) & 0x0040) != 0)
 		wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9) | (1 << 8));
 
 	/* Receive descriptor ring.  */
@@ -703,9 +786,11 @@ static int ep93xx_close(struct net_device *dev)
 static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(ifr);
 
-	return generic_mii_ioctl(&ep->mii, data, cmd, NULL);
+	if (!ep->phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(ep->phydev, ifr, cmd);
 }
 
 static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
@@ -717,25 +802,19 @@ static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *i
 static int ep93xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_ethtool_gset(&ep->mii, cmd);
+	return phy_ethtool_gset(ep->phydev, cmd);
 }
 
 static int ep93xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_ethtool_sset(&ep->mii, cmd);
+	return phy_ethtool_sset(ep->phydev, cmd);
 }
 
 static int ep93xx_nway_reset(struct net_device *dev)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_nway_restart(&ep->mii);
-}
-
-static u32 ep93xx_get_link(struct net_device *dev)
-{
-	struct ep93xx_priv *ep = netdev_priv(dev);
-	return mii_link_ok(&ep->mii);
+	return phy_start_aneg(ep->phydev);
 }
 
 static const struct ethtool_ops ep93xx_ethtool_ops = {
@@ -743,7 +822,7 @@ static const struct ethtool_ops ep93xx_ethtool_ops = {
 	.get_settings		= ep93xx_get_settings,
 	.set_settings		= ep93xx_set_settings,
 	.nway_reset		= ep93xx_nway_reset,
-	.get_link		= ep93xx_get_link,
+	.get_link		= ethtool_op_get_link,
 };
 
 static const struct net_device_ops ep93xx_netdev_ops = {
@@ -789,6 +868,11 @@ static int ep93xx_eth_remove(struct platform_device *pdev)
 
 	/* @@@ Force down.  */
 	unregister_netdev(dev);
+
+	mdiobus_unregister(ep->mii_bus);
+	kfree(ep->mii_bus->irq);
+	mdiobus_free(ep->mii_bus);
+
 	ep93xx_free_buffers(ep);
 
 	if (ep->base_addr != NULL)
@@ -811,7 +895,8 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 	struct ep93xx_priv *ep;
 	struct resource *mem;
 	int irq;
-	int err;
+	int err = 0;
+	int i;
 
 	if (pdev == NULL)
 		return -ENODEV;
@@ -849,13 +934,41 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 	}
 	ep->irq = irq;
 
-	ep->mii.phy_id = data->phy_id;
-	ep->mii.phy_id_mask = 0x1f;
-	ep->mii.reg_num_mask = 0x1f;
-	ep->mii.dev = dev;
-	ep->mii.mdio_read = ep93xx_mdio_read;
-	ep->mii.mdio_write = ep93xx_mdio_write;
+	ep->mii_bus = mdiobus_alloc();
+	if (!ep->mii_bus) {
+		dev_err(&pdev->dev, "Failed to allocate mdiobus\n");
+		goto err_out;
+	}
+
+	ep->phy_addr = data->phy_id;
+	ep->mii_bus->priv = dev;
+	ep->mii_bus->read = ep93xx_mdiobus_read;
+	ep->mii_bus->write = ep93xx_mdiobus_write;
+	ep->mii_bus->reset = ep93xx_mdiobus_reset;
+	ep->mii_bus->name = "ep93xx_eth_mii";
 	ep->mdc_divisor = 40;	/* Max HCLK 100 MHz, min MDIO clk 2.5 MHz.  */
+	snprintf(ep->mii_bus->id, MII_BUS_ID_SIZE, "%x",
+				(pdev->id != -1) ? pdev->id : 0);
+	ep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!ep->mii_bus->irq) {
+		dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
+		goto err_out;
+	}
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		ep->mii_bus->irq[i] = PHY_POLL;
+
+	err = mdiobus_register(ep->mii_bus);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to register MII bus\n");
+		goto err_out;
+	}
+
+	err = ep93xx_mii_probe(dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to probe MII bus\n");
+		goto err_out;
+	}
 
 	if (is_zero_ether_addr(dev->dev_addr))
 		random_ether_addr(dev->dev_addr);
-- 
1.7.4.1


             reply	other threads:[~2011-06-05 17:57 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-05 17:57 Florian Fainelli [this message]
2011-06-05 17:57 ` [PATCH] ep93xx-eth: convert to phylib Florian Fainelli
2011-06-05 18:29 ` Florian Fainelli
2011-06-05 18:29   ` Florian Fainelli
2011-06-05 21:06   ` David Miller
2011-06-05 21:06     ` David Miller
2011-06-06  5:15     ` Florian Fainelli
2011-06-06  5:15       ` Florian Fainelli
2011-06-06 17:34       ` Lennert Buytenhek
2011-06-06 17:34         ` Lennert Buytenhek
2011-06-09 20:30   ` Petr Štetiar
2011-06-09 20:30     ` Petr Štetiar
2011-06-10  9:46     ` Florian Fainelli
2011-06-10  9:46       ` Florian Fainelli
2011-06-15 19:15     ` Mika Westerberg
2011-06-15 19:15       ` Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201106051957.36492.florian@openwrt.org \
    --to=florian@openwrt.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.