* "ACPI: Unable to start the ACPI Interpreter"
@ 2011-06-24 18:55 Liwei
2011-06-25 12:33 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-24 18:55 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1: Type: text/plain, Size: 1350 bytes --]
Hello list,
Just for fun, I tried compiling the 3.0-rc4 kernel from Jeremy's
git repo. Compilation and installation were successful, so does
booting into the kernel without xen.
With xen however, I get the following:
ACPI: SCI (IRQ9) allocation failed
ACPI: Unable to start the ACPI Interpreter
=============================================================================
BUG Acpi-ParseExt: Objects remaining on kmem_cache_close()
-----------------------------------------------------------------------------
INFO: Slab 0xffffea0000a57308 objects=56 used=1 fp=0xffff88002f4577e0
flags=0x1000000000000080
INFO: Object 0xffff88002f457900 @offset=2304
SLUB Acpi-ParseExt: kmem_cache_destroy called for cache that still has objects.
SLUB: Unable to add boot slab alias [some weird characters] to sysfs
Loading, please wait...
There could be some mix ups between "0" and "8" in the hex values
as the above were transcribed from a cameraphone photo. The system
continues to boot, but fails badly trying to start udev, stuck with
the following (with varying device IDs):
...
udevd[80]: timeout: killing '/sbin/modprobe -b
pci:v000011ABd00006440sv0000d00006440bc01sc00i00' [92]
...
Not looking for a solution here, just reporting this to the devs.
Attached is the kernel .config file. Running on xen-unstable compiled today.
Liwei
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 126624 bytes --]
#
# Automatically generated make config: don't edit
# Linux/x86_64 3.0.0-rc4 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_DEBUG is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_ARCH_NOINLINE_SPIN_UNLOCK is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=512
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_HOTPLUG_MEMORY=m
CONFIG_ACPI_SBS=m
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_INTR_REMAP=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_XEN_PCIDEV_BACKEND=y
# CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set
CONFIG_XEN_PCIDEV_BACKEND_PASS=y
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
# CONFIG_IP_VS_PE_SIP is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_MCP251X is not set
# CONFIG_PCH_CAN is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_KVASER_PCI=m
# CONFIG_CAN_PLX_PCI is not set
# CONFIG_CAN_C_CAN is not set
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_SOFTING is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_PCMCIA is not set
# CONFIG_MTD_GPIO_ADDR is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
# CONFIG_INTEL_MID_PTI is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
CONFIG_HP_ILO=m
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_BLK_DEV_OPTI621=m
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=m
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
# CONFIG_SCSI_CXGB4_ISCSI is not set
CONFIG_SCSI_BNX2_ISCSI=m
# CONFIG_SCSI_BNX2X_FCOE is not set
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_VMWARE_PVSCSI=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_AHA152X is not set
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARASAN_CF is not set
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_RAID is not set
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_MII=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
# CONFIG_MICREL_PHY is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ETHOC=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=m
# CONFIG_NET_POCKET is not set
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_JME=m
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
# CONFIG_IXGBEVF is not set
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
# CONFIG_BNA is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_BE2NET=m
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
# CONFIG_ATH9K_PCI is not set
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_N is not set
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLAGN=m
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWLWIFI_DEVICE_SVTOOL is not set
# CONFIG_IWL_P2P is not set
CONFIG_IWLWIFI_LEGACY=m
#
# Debugging Options
#
# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
CONFIG_IWL4965=m
CONFIG_IWL3945=m
CONFIG_IWM=m
# CONFIG_IWM_DEBUG is not set
# CONFIG_IWM_TRACING is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_MESH is not set
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
# CONFIG_ORINOCO_USB is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
# CONFIG_RT2800USB_RT35XX is not set
# CONFIG_RT2800USB_RT53XX is not set
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192CU is not set
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
# CONFIG_WL12XX_MENU is not set
CONFIG_WL12XX_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
# CONFIG_MWIFIEX is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
# CONFIG_WIMAX_IWMC3200_SDIO is not set
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
#
# CAIF transport drivers
#
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
# CONFIG_MISDN_NETJET is not set
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
# CONFIG_SERIAL_MAX3107 is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=m
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_PARPORT is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_BQ20Z75 is not set
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_PCF50633=m
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=m
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_APPLESMC=m
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
# CONFIG_SP5100_TCO is not set
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
# CONFIG_NV_TCO is not set
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
# CONFIG_XEN_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_HTC_PASIC3=m
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_WM8400=m
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_LP3971=m
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_RC_CORE=m
CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_LIRC_CODEC=m
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
#
# Camera sensor devices
#
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Miscelaneous helper chips
#
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
# CONFIG_VIDEO_TIMBERDALE is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
# CONFIG_MEDIA_ALTERA_CI is not set
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
# CONFIG_VIDEO_CX18_ALSA is not set
CONFIG_VIDEO_SAA7164=m
CONFIG_VIDEO_CAFE_CCIC=m
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_VIA_CAMERA is not set
# CONFIG_VIDEO_NOON010PC30 is not set
CONFIG_SOC_CAMERA=m
# CONFIG_SOC_CAMERA_IMX074 is not set
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
# CONFIG_SOC_CAMERA_MT9T112 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_RJ54N1 is not set
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_SOC_CAMERA_PLATFORM=m
# CONFIG_SOC_CAMERA_OV2640 is not set
# CONFIG_SOC_CAMERA_OV6650 is not set
CONFIG_SOC_CAMERA_OV772X=m
# CONFIG_SOC_CAMERA_OV9640 is not set
# CONFIG_SOC_CAMERA_OV9740 is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
# CONFIG_USB_GSPCA_BENQ is not set
CONFIG_USB_GSPCA_CONEX=m
# CONFIG_USB_GSPCA_CPIA1 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
# CONFIG_USB_GSPCA_NW80X is not set
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
# CONFIG_USB_GSPCA_OV534_9 is not set
CONFIG_USB_GSPCA_PAC207=m
# CONFIG_USB_GSPCA_PAC7302 is not set
CONFIG_USB_GSPCA_PAC7311=m
# CONFIG_USB_GSPCA_SN9C2028 is not set
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
# CONFIG_USB_GSPCA_SPCA1528 is not set
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
# CONFIG_USB_GSPCA_SQ930X is not set
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STV0680 is not set
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_TLG2300 is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_USB_ET61X251=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_MAXIRADIO=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_RADIO_TEA5764=m
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_FRIIO=m
# CONFIG_DVB_USB_EC168 is not set
# CONFIG_DVB_USB_AZ6027 is not set
# CONFIG_DVB_USB_LME2510 is not set
# CONFIG_DVB_USB_TECHNISAT_USB2 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_SIANO_MDTV=m
#
# Siano module components
#
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=m
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m
#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=m
#
# Supported Mantis Adapters
#
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_UDL is not set
CONFIG_FB_VIRTUAL=m
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_PCF50633 is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
# CONFIG_SND_ALOOP is not set
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
# CONFIG_SND_ASIHPI is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_ES1968_INPUT is not set
# CONFIG_SND_ES1968_RADIO is not set
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
# CONFIG_SND_LOLA is not set
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_INPUT is not set
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_FIREWIRE=y
# CONFIG_SND_FIREWIRE_SPEAKERS is not set
# CONFIG_SND_ISIGHT is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=m
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_ALIX2=m
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
# CONFIG_INFINIBAND_QIB is not set
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_PCF50633=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_S3=y
CONFIG_ACPI_PROCESSOR_XEN=m
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_XEN_PLATFORM_PCI=y
CONFIG_SWIOTLB_XEN=y
CONFIG_STAGING=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
CONFIG_DIGIEPCA=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_COMPUTONE=m
CONFIG_ET131X=m
# CONFIG_ET131X_DEBUG is not set
# CONFIG_SLICOSS is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_TM6000 is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
CONFIG_PRISM2_USB=m
# CONFIG_ECHO is not set
# CONFIG_BRCMUTIL is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_PCI_DRIVERS=m
# CONFIG_COMEDI_ADDI_APCI_035 is not set
# CONFIG_COMEDI_ADDI_APCI_1032 is not set
# CONFIG_COMEDI_ADDI_APCI_1500 is not set
# CONFIG_COMEDI_ADDI_APCI_1516 is not set
# CONFIG_COMEDI_ADDI_APCI_1564 is not set
# CONFIG_COMEDI_ADDI_APCI_16XX is not set
# CONFIG_COMEDI_ADDI_APCI_2016 is not set
# CONFIG_COMEDI_ADDI_APCI_2032 is not set
# CONFIG_COMEDI_ADDI_APCI_2200 is not set
# CONFIG_COMEDI_ADDI_APCI_3001 is not set
# CONFIG_COMEDI_ADDI_APCI_3120 is not set
# CONFIG_COMEDI_ADDI_APCI_3501 is not set
# CONFIG_COMEDI_ADDI_APCI_3XXX is not set
# CONFIG_COMEDI_ADL_PCI6208 is not set
# CONFIG_COMEDI_ADL_PCI7230 is not set
# CONFIG_COMEDI_ADL_PCI7296 is not set
# CONFIG_COMEDI_ADL_PCI7432 is not set
# CONFIG_COMEDI_ADL_PCI8164 is not set
# CONFIG_COMEDI_ADL_PCI9111 is not set
# CONFIG_COMEDI_ADL_PCI9118 is not set
# CONFIG_COMEDI_ADV_PCI1710 is not set
# CONFIG_COMEDI_ADV_PCI1723 is not set
# CONFIG_COMEDI_ADV_PCI_DIO is not set
# CONFIG_COMEDI_AMPLC_DIO200 is not set
# CONFIG_COMEDI_AMPLC_PC236 is not set
# CONFIG_COMEDI_AMPLC_PC263 is not set
# CONFIG_COMEDI_AMPLC_PCI224 is not set
# CONFIG_COMEDI_AMPLC_PCI230 is not set
# CONFIG_COMEDI_CONTEC_PCI_DIO is not set
# CONFIG_COMEDI_DT3000 is not set
# CONFIG_COMEDI_UNIOXX5 is not set
# CONFIG_COMEDI_GSC_HPDI is not set
# CONFIG_COMEDI_ICP_MULTI is not set
# CONFIG_COMEDI_II_PCI20KC is not set
# CONFIG_COMEDI_DAQBOARD2000 is not set
# CONFIG_COMEDI_JR3_PCI is not set
# CONFIG_COMEDI_KE_COUNTER is not set
# CONFIG_COMEDI_CB_PCIDAS64 is not set
# CONFIG_COMEDI_CB_PCIDAS is not set
# CONFIG_COMEDI_CB_PCIDDA is not set
# CONFIG_COMEDI_CB_PCIDIO is not set
# CONFIG_COMEDI_CB_PCIMDAS is not set
# CONFIG_COMEDI_CB_PCIMDDA is not set
# CONFIG_COMEDI_ME4000 is not set
# CONFIG_COMEDI_ME_DAQ is not set
# CONFIG_COMEDI_RTD520 is not set
# CONFIG_COMEDI_S526 is not set
# CONFIG_COMEDI_S626 is not set
# CONFIG_COMEDI_SSV_DNP is not set
CONFIG_COMEDI_PCMCIA_DRIVERS=m
# CONFIG_COMEDI_CB_DAS16_CS is not set
# CONFIG_COMEDI_DAS08_CS is not set
# CONFIG_COMEDI_QUATECH_DAQP_CS is not set
CONFIG_COMEDI_USB_DRIVERS=m
# CONFIG_COMEDI_DT9812 is not set
# CONFIG_COMEDI_USBDUX is not set
# CONFIG_COMEDI_USBDUXFAST is not set
# CONFIG_COMEDI_VMK80XX is not set
# CONFIG_COMEDI_NI_COMMON is not set
CONFIG_COMEDI_8255=m
# CONFIG_COMEDI_DAS08 is not set
# CONFIG_COMEDI_FC is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
CONFIG_RTL8192U=m
CONFIG_RTL8192E=m
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_TRANZPORT is not set
CONFIG_POHMELFS=m
# CONFIG_POHMELFS_DEBUG is not set
CONFIG_POHMELFS_CRYPTO=y
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_NOUVEAU_DEBUG is not set
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
CONFIG_VT6656=m
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
# CONFIG_XVMALLOC is not set
# CONFIG_ZRAM is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_CXT1E1 is not set
# CONFIG_FB_XGI is not set
# CONFIG_LIRC_STAGING is not set
# CONFIG_EASYCAP is not set
# CONFIG_SOLO6X10 is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_MACH_NO_WESTBRIDGE=y
# CONFIG_SBE_2T3E3 is not set
# CONFIG_ATH6K_LEGACY is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
# CONFIG_SPEAKUP_SYNTH_DECPC is not set
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_DRM_PSB is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
# CONFIG_DELL_WMI_AIO is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
# CONFIG_HP_ACCEL is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_IDEAPAD_LAPTOP is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
CONFIG_ACPI_ASUS=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
# CONFIG_INTEL_OAKTRAIL is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
CONFIG_NFSD=m
CONFIG_NFSD_DEPRECATED=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CIFS_ACL is not set
# CONFIG_CIFS_NFSD_EXPORT is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
# CONFIG_9P_FS_POSIX_ACL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_TOMOYO=y
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-24 18:55 "ACPI: Unable to start the ACPI Interpreter" Liwei
@ 2011-06-25 12:33 ` Liwei
[not found] ` <20110627133936.GB6978@dumpdata.com>
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-25 12:33 UTC (permalink / raw)
To: xen-devel
Just a follow up. I found out that the boot failure's due to a
unsupported (faulty?) PATA controller. Removed it and the system
actually boots. The SCI allocation failure still occurs though.
Apparently this also occurs with the Debian experimental 3.0 kernel
too. Here's the full backtrace from dmesg:
[ 3.934034] bio: create slab <bio-0> at 0
[ 3.936216] ACPI: SCI (IRQ9) allocation failed
[ 3.936259] ACPI Exception: AE_NOT_ACQUIRED, Unable to install
System Control Interrupt handler (20110413/evevent-119)
[ 3.936264] ACPI: Unable to start the ACPI Interpreter
[ 3.974522] =============================================================================
[ 3.974570] BUG Acpi-ParseExt: Objects remaining on kmem_cache_close()
[ 3.974613] -----------------------------------------------------------------------------
[ 3.974614]
[ 3.974694] INFO: Slab 0xffffea0000a57308 objects=56 used=1
fp=0xffff88002f4577e0 flags=0x100000000000080
[ 3.974743] Pid: 1, comm: swapper Not tainted 3.0.0-rc4-amd64+ #1
[ 3.974745] Call Trace:
[ 3.974753] [<ffffffff810e5f13>] ? slab_err+0x93/0xb5
[ 3.974758] [<ffffffff81006b4d>] ? xen_force_evtchn_callback+0x9/0xa
[ 3.974762] [<ffffffff810071b2>] ? check_events+0x12/0x20
[ 3.974766] [<ffffffff810e8ff9>] ? kmem_cache_destroy+0x170/0x2dc
[ 3.974770] [<ffffffff816c1db2>] ? acpi_sleep_proc_init+0x27/0x27
[ 3.974774] [<ffffffff811cf965>] ? acpi_os_delete_cache+0x6/0xa
[ 3.974779] [<ffffffff811eedee>] ? acpi_ut_delete_caches+0x6a/0x7a
[ 3.974783] [<ffffffff811efd3f>] ? acpi_terminate+0x3e/0x49
[ 3.974786] [<ffffffff816c2000>] ? acpi_init+0x24e/0x297
[ 3.974791] [<ffffffff8122f708>] ? __class_create+0x3d/0x61
[ 3.974795] [<ffffffff810f0c30>] ? mount_fs+0x144/0x144
[ 3.974799] [<ffffffff816bf936>] ? video_setup+0x75/0x75
[ 3.974803] [<ffffffff816bf99c>] ? fbmem_init+0x66/0x95
[ 3.974806] [<ffffffff81002086>] ? do_one_initcall+0x76/0x12c
[ 3.974810] [<ffffffff81696bf4>] ? kernel_init+0xbd/0x137
[ 3.974815] [<ffffffff813278a4>] ? kernel_thread_helper+0x4/0x10
[ 3.974819] [<ffffffff813269b3>] ? int_ret_from_sys_call+0x7/0x1b
[ 3.974823] [<ffffffff813216e5>] ? retint_restore_args+0x5/0x6
[ 3.974826] [<ffffffff813278a0>] ? gs_change+0x13/0x13
[ 3.974830] INFO: Object 0xffff88002f457900 @offset=2304
[ 3.974873] SLUB Acpi-ParseExt: kmem_cache_destroy called for cache
that still has objects.
[ 3.974920] Pid: 1, comm: swapper Not tainted 3.0.0-rc4-amd64+ #1
[ 3.974922] Call Trace:
[ 3.974925] [<ffffffff810e9116>] ? kmem_cache_destroy+0x28d/0x2dc
[ 3.974928] [<ffffffff816c1db2>] ? acpi_sleep_proc_init+0x27/0x27
[ 3.974931] [<ffffffff811cf965>] ? acpi_os_delete_cache+0x6/0xa
[ 3.974934] [<ffffffff811eedee>] ? acpi_ut_delete_caches+0x6a/0x7a
[ 3.974938] [<ffffffff811efd3f>] ? acpi_terminate+0x3e/0x49
[ 3.974941] [<ffffffff816c2000>] ? acpi_init+0x24e/0x297
[ 3.974944] [<ffffffff8122f708>] ? __class_create+0x3d/0x61
[ 3.974947] [<ffffffff810f0c30>] ? mount_fs+0x144/0x144
[ 3.974950] [<ffffffff816bf936>] ? video_setup+0x75/0x75
[ 3.974953] [<ffffffff816bf99c>] ? fbmem_init+0x66/0x95
[ 3.974956] [<ffffffff81002086>] ? do_one_initcall+0x76/0x12c
[ 3.974960] [<ffffffff81696bf4>] ? kernel_init+0xbd/0x137
[ 3.974963] [<ffffffff813278a4>] ? kernel_thread_helper+0x4/0x10
[ 3.974966] [<ffffffff813269b3>] ? int_ret_from_sys_call+0x7/0x1b
[ 3.974970] [<ffffffff813216e5>] ? retint_restore_args+0x5/0x6
[ 3.974973] [<ffffffff813278a0>] ? gs_change+0x13/0x13
On 25 June 2011 02:55, Liwei <xieliwei@gmail.com> wrote:
> Hello list,
> Just for fun, I tried compiling the 3.0-rc4 kernel from Jeremy's
> git repo. Compilation and installation were successful, so does
> booting into the kernel without xen.
> With xen however, I get the following:
>
> ACPI: SCI (IRQ9) allocation failed
> ACPI: Unable to start the ACPI Interpreter
> =============================================================================
> BUG Acpi-ParseExt: Objects remaining on kmem_cache_close()
> -----------------------------------------------------------------------------
>
> INFO: Slab 0xffffea0000a57308 objects=56 used=1 fp=0xffff88002f4577e0
> flags=0x1000000000000080
> INFO: Object 0xffff88002f457900 @offset=2304
> SLUB Acpi-ParseExt: kmem_cache_destroy called for cache that still has objects.
> SLUB: Unable to add boot slab alias [some weird characters] to sysfs
> Loading, please wait...
>
> There could be some mix ups between "0" and "8" in the hex values
> as the above were transcribed from a cameraphone photo. The system
> continues to boot, but fails badly trying to start udev, stuck with
> the following (with varying device IDs):
>
> ...
> udevd[80]: timeout: killing '/sbin/modprobe -b
> pci:v000011ABd00006440sv0000d00006440bc01sc00i00' [92]
> ...
>
> Not looking for a solution here, just reporting this to the devs.
> Attached is the kernel .config file. Running on xen-unstable compiled today.
>
> Liwei
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
[not found] ` <20110627133936.GB6978@dumpdata.com>
@ 2011-06-27 15:12 ` Liwei
2011-06-27 16:32 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-27 15:12 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 27 June 2011 21:39, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
On Sat, Jun 25, 2011 at 08:33:04PM +0800, Liwei wrote:
>> Just a follow up. I found out that the boot failure's due to a
>> unsupported (faulty?) PATA controller. Removed it and the system
>> actually boots. The SCI allocation failure still occurs though.
>
> That in general causes the ACPI interpreter to stop working
> completly.
Does failure of the interpreter cause anything bad to happen? Common
sense tells me that things should be going very wrong, but the system
does come up. I can ssh in, run hvm domains, etc. The only problem I
see though is that interrupt mapping for certain PCI passthrough
devices (particularly one of the two Intel EHCI USB controllers and a
firewire controller) fails. VGA passthrough with or without
gfx_passthru = 1 still works fine though:
#xl dmesg
(XEN) physdev.c:164: dom2: 10:-1 already mapped to 16
(XEN) irq.c:1297:d0 Cannot bind IRQ 16 to guest. Others do not share.
(XEN) domctl.c:914:d0 pt_irq_create_bind failed!
(XEN) irq.c:1297:d0 Cannot bind IRQ 20 to guest. Others do not share.
(XEN) domctl.c:914:d0 pt_irq_create_bind failed!
#cat qemu-dm-vm.log
IRQ type = MSI-INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 00:1a.0 ...
pt_iomul_init: Error: pt_iomul_init can't open file
/dev/xen/pci_iomul: No such file or directory: 0x0:0x1a.0x0
pt_register_regions: IO region registered (size=0x00001000 base_addr=0xa0004000)
pci_intx: intx=1
register_real_device: Error: Binding of interrupt failed! rc=-1
register_real_device: Real physical device 00:1a.0 registered successfuly!
IRQ type = INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 0f:03.0 ...
pt_iomul_init: Error: pt_iomul_init can't open file
/dev/xen/pci_iomul: No such file or directory: 0xf:0x3.0x0
pt_register_regions: IO region registered (size=0x00001000 base_addr=0xfbe04000)
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbe00000)
pci_intx: intx=1
register_real_device: Error: Binding of interrupt failed! rc=-1
register_real_device: Real physical device 0f:03.0 registered successfuly!
#lspci -v
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: eVga.com. Corp. Device 1014
Flags: bus master, medium devsel, latency 0, IRQ 10
Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: xen-pciback
0f:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb84
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at fbe04000 (32-bit, non-prefetchable) [size=4K]
Memory at fbe00000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Kernel driver in use: xen-pciback
(Only IRQs 1, 3, 5, 8, 10, 11, 12, 200++ appear in /proc/interrupts)
>
> If you look at the full serial log do you see INT_SRC_OVR for IRQ 9?
> You should see something akin to this:
>
----snip----
Yes I do:
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
----snip----
[ 3.405497] Memory: 776452k/13631488k available (3239k kernel code,
3146184k absent, 9708852k reserved, 3423k data, 532k init)
[ 3.405579] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[ 3.405616] Preemptible hierarchical RCU implementation.
[ 3.405630] NR_IRQS:33024 nr_irqs:2048 16
[ 3.405705] xen: sci override: global_irq=20 trigger=0 polarity=1
[ 3.405708] xen: registering gsi 20 triggering 0 polarity 1
[ 3.405721] xen: --> pirq=20 -> irq=20
[ 3.405728] xen: acpi sci 20
[ 3.405732] xen: --> pirq=1 -> irq=1
[ 3.405736] xen: --> pirq=2 -> irq=2
[ 3.405739] xen: --> pirq=3 -> irq=3
[ 3.405743] xen: --> pirq=4 -> irq=4
[ 3.405746] xen: --> pirq=5 -> irq=5
[ 3.405750] xen: --> pirq=6 -> irq=6
[ 3.405753] xen: --> pirq=7 -> irq=7
[ 3.405757] xen: --> pirq=8 -> irq=8
[ 3.405760] xen: --> pirq=10 -> irq=10
[ 3.405763] xen: --> pirq=11 -> irq=11
[ 3.405767] xen: --> pirq=12 -> irq=12
[ 3.405770] xen: --> pirq=13 -> irq=13
[ 3.405774] xen: --> pirq=14 -> irq=14
[ 3.405777] xen: --> pirq=15 -> irq=15
Also, it seems that the same SCI allocation failure and the problems
described above is also present in the 2.6.39 branch as well. The only
version which I can get to work reliably with is 2.6.32.xx.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 15:12 ` Liwei
@ 2011-06-27 16:32 ` Konrad Rzeszutek Wilk
2011-06-27 16:59 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-27 16:32 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Mon, Jun 27, 2011 at 11:12:43PM +0800, Liwei wrote:
> On 27 June 2011 21:39, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> On Sat, Jun 25, 2011 at 08:33:04PM +0800, Liwei wrote:
> >> Just a follow up. I found out that the boot failure's due to a
> >> unsupported (faulty?) PATA controller. Removed it and the system
> >> actually boots. The SCI allocation failure still occurs though.
> >
> > That in general causes the ACPI interpreter to stop working
> > completly.
>
> Does failure of the interpreter cause anything bad to happen? Common
Well yes. It can't interpret the ACPI _PRT tables so the
interrupt routing information is not present.
Which means that the drivers fall back to polling mode or end up
using the wrong IRQs.
> sense tells me that things should be going very wrong, but the system
> does come up. I can ssh in, run hvm domains, etc. The only problem I
> see though is that interrupt mapping for certain PCI passthrough
> devices (particularly one of the two Intel EHCI USB controllers and a
> firewire controller) fails. VGA passthrough with or without
> gfx_passthru = 1 still works fine though:
>
> #xl dmesg
> (XEN) physdev.c:164: dom2: 10:-1 already mapped to 16
> (XEN) irq.c:1297:d0 Cannot bind IRQ 16 to guest. Others do not share.
> (XEN) domctl.c:914:d0 pt_irq_create_bind failed!
> (XEN) irq.c:1297:d0 Cannot bind IRQ 20 to guest. Others do not share.
> (XEN) domctl.c:914:d0 pt_irq_create_bind failed!
>
> #cat qemu-dm-vm.log
> IRQ type = MSI-INTx
> dm-command: hot insert pass-through pci dev
> register_real_device: Assigning real physical device 00:1a.0 ...
> pt_iomul_init: Error: pt_iomul_init can't open file
> /dev/xen/pci_iomul: No such file or directory: 0x0:0x1a.0x0
> pt_register_regions: IO region registered (size=0x00001000 base_addr=0xa0004000)
> pci_intx: intx=1
> register_real_device: Error: Binding of interrupt failed! rc=-1
> register_real_device: Real physical device 00:1a.0 registered successfuly!
> IRQ type = INTx
> dm-command: hot insert pass-through pci dev
> register_real_device: Assigning real physical device 0f:03.0 ...
> pt_iomul_init: Error: pt_iomul_init can't open file
> /dev/xen/pci_iomul: No such file or directory: 0xf:0x3.0x0
> pt_register_regions: IO region registered (size=0x00001000 base_addr=0xfbe04000)
> pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbe00000)
> pci_intx: intx=1
> register_real_device: Error: Binding of interrupt failed! rc=-1
> register_real_device: Real physical device 0f:03.0 registered successfuly!
>
> #lspci -v
> 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
> USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
> Subsystem: eVga.com. Corp. Device 1014
> Flags: bus master, medium devsel, latency 0, IRQ 10
> Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Capabilities: [98] PCI Advanced Features
> Kernel driver in use: xen-pciback
> 0f:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
> Subsystem: nVidia Corporation Device cb84
> Flags: bus master, medium devsel, latency 64, IRQ 11
> Memory at fbe04000 (32-bit, non-prefetchable) [size=4K]
> Memory at fbe00000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
> Kernel driver in use: xen-pciback
>
> (Only IRQs 1, 3, 5, 8, 10, 11, 12, 200++ appear in /proc/interrupts)
>
> >
> > If you look at the full serial log do you see INT_SRC_OVR for IRQ 9?
> > You should see something akin to this:
> >
> ----snip----
>
> Yes I do:
>
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> ----snip----
> [ 3.405497] Memory: 776452k/13631488k available (3239k kernel code,
> 3146184k absent, 9708852k reserved, 3423k data, 532k init)
> [ 3.405579] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=8, Nodes=1
> [ 3.405616] Preemptible hierarchical RCU implementation.
> [ 3.405630] NR_IRQS:33024 nr_irqs:2048 16
> [ 3.405705] xen: sci override: global_irq=20 trigger=0 polarity=1
> [ 3.405708] xen: registering gsi 20 triggering 0 polarity 1
> [ 3.405721] xen: --> pirq=20 -> irq=20
> [ 3.405728] xen: acpi sci 20
Whoa. 20. That is unusual, but we do set it up. Perhaps ineptly thought.
Is there an option in the BIOS to toggle some ACPI SCI option?
Does /proc/interrupts have this for IRQ 20:
9: 3 0 0 0 0 0 xen-pirq-ioapic-level acpi
?
> [ 3.405732] xen: --> pirq=1 -> irq=1
> [ 3.405736] xen: --> pirq=2 -> irq=2
> [ 3.405739] xen: --> pirq=3 -> irq=3
> [ 3.405743] xen: --> pirq=4 -> irq=4
> [ 3.405746] xen: --> pirq=5 -> irq=5
> [ 3.405750] xen: --> pirq=6 -> irq=6
> [ 3.405753] xen: --> pirq=7 -> irq=7
> [ 3.405757] xen: --> pirq=8 -> irq=8
> [ 3.405760] xen: --> pirq=10 -> irq=10
> [ 3.405763] xen: --> pirq=11 -> irq=11
> [ 3.405767] xen: --> pirq=12 -> irq=12
> [ 3.405770] xen: --> pirq=13 -> irq=13
> [ 3.405774] xen: --> pirq=14 -> irq=14
> [ 3.405777] xen: --> pirq=15 -> irq=15
>
> Also, it seems that the same SCI allocation failure and the problems
> described above is also present in the 2.6.39 branch as well. The only
> version which I can get to work reliably with is 2.6.32.xx.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 16:32 ` Konrad Rzeszutek Wilk
@ 2011-06-27 16:59 ` Liwei
2011-06-27 17:33 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-27 16:59 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 28 June 2011 00:32, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> On Mon, Jun 27, 2011 at 11:12:43PM +0800, Liwei wrote:
>>
>> Does failure of the interpreter cause anything bad to happen? Common
>
> Well yes. It can't interpret the ACPI _PRT tables so the
> interrupt routing information is not present.
>
> Which means that the drivers fall back to polling mode or end up
> using the wrong IRQs.
>
----snip----
>> Yes I do:
>>
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ2 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> ----snip----
>> [ 3.405497] Memory: 776452k/13631488k available (3239k kernel code,
>> 3146184k absent, 9708852k reserved, 3423k data, 532k init)
>> [ 3.405579] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
>> CPUs=8, Nodes=1
>> [ 3.405616] Preemptible hierarchical RCU implementation.
>> [ 3.405630] NR_IRQS:33024 nr_irqs:2048 16
>> [ 3.405705] xen: sci override: global_irq=20 trigger=0 polarity=1
>> [ 3.405708] xen: registering gsi 20 triggering 0 polarity 1
>> [ 3.405721] xen: --> pirq=20 -> irq=20
>> [ 3.405728] xen: acpi sci 20
>
> Whoa. 20. That is unusual, but we do set it up. Perhaps ineptly thought.
> Is there an option in the BIOS to toggle some ACPI SCI option?
Did a reboot and checked the BIOS menus. Nothing about SCI in there.
Is the SCI requirement something new in the 2.6.39+ kernels? Because
things are working well with 2.6.32.
>
> Does /proc/interrupts have this for IRQ 20:
>
> 9: 3 0 0 0 0 0 xen-pirq-ioapic-level acpi
>
> ?
Nope, IRQ 20 or any acpi related interrupts doesn't show up:
CPU0 CPU1 CPU2 CPU3 CPU4
CPU5 CPU6 CPU7
1: 4 0 0 0 0
0 0 0 xen-pirq-ioapic-edge i8042
3: 0 0 0 0 0
0 0 0 xen-pirq-ioapic-edge mvsas
5: 0 0 0 0 0
0 0 0 xen-pirq-ioapic-edge mvsas
8: 3 0 0 0 0
0 0 0 xen-pirq-ioapic-edge rtc0
10: 0 0 0 0 0
0 0 0 xen-pirq-ioapic-edge mvsas
11: 0 0 0 0 0
0 0 0 xen-pirq-ioapic-edge mvsas
12: 6 0 0 0 0
0 0 0 xen-pirq-ioapic-edge i8042
272: 7433262 0 0 0 0
0 0 0 xen-percpu-virq timer0
273: 260592 0 0 0 0
0 0 0 xen-percpu-ipi resched0
274: 28786 0 0 0 0
0 0 0 xen-percpu-ipi callfunc0
275: 0 0 0 0 0
0 0 0 xen-percpu-virq debug0
276: 112 0 0 0 0
0 0 0 xen-percpu-ipi callfuncsingle0
277: 0 5534620 0 0 0
0 0 0 xen-percpu-virq timer1
278: 0 430137 0 0 0
0 0 0 xen-percpu-ipi resched1
279: 0 1210410 0 0 0
0 0 0 xen-percpu-ipi callfunc1
280: 0 0 0 0 0
0 0 0 xen-percpu-virq debug1
281: 0 975 0 0 0
0 0 0 xen-percpu-ipi callfuncsingle1
282: 0 0 114181 0 0
0 0 0 xen-percpu-virq timer2
283: 0 0 134749 0 0
0 0 0 xen-percpu-ipi resched2
284: 0 0 1211915 0 0
0 0 0 xen-percpu-ipi callfunc2
285: 0 0 0 0 0
0 0 0 xen-percpu-virq debug2
286: 0 0 69666 0 0
0 0 0 xen-percpu-ipi callfuncsingle2
287: 0 0 0 30680 0
0 0 0 xen-percpu-virq timer3
288: 0 0 0 10670 0
0 0 0 xen-percpu-ipi resched3
289: 0 0 0 1223807 0
0 0 0 xen-percpu-ipi callfunc3
290: 0 0 0 0 0
0 0 0 xen-percpu-virq debug3
291: 0 0 0 1141 0
0 0 0 xen-percpu-ipi callfuncsingle3
292: 0 0 0 0 21732
0 0 0 xen-percpu-virq timer4
293: 0 0 0 0 6725
0 0 0 xen-percpu-ipi resched4
294: 0 0 0 0 1223929
0 0 0 xen-percpu-ipi callfunc4
295: 0 0 0 0 0
0 0 0 xen-percpu-virq debug4
296: 0 0 0 0 3068
0 0 0 xen-percpu-ipi callfuncsingle4
297: 0 0 0 0 0
16427 0 0 xen-percpu-virq timer5
298: 0 0 0 0 0
5746 0 0 xen-percpu-ipi resched5
299: 0 0 0 0 0
1224228 0 0 xen-percpu-ipi callfunc5
300: 0 0 0 0 0
0 0 0 xen-percpu-virq debug5
301: 0 0 0 0 0
1002 0 0 xen-percpu-ipi callfuncsingle5
302: 0 0 0 0 0
0 17731 0 xen-percpu-virq timer6
303: 0 0 0 0 0
0 7430 0 xen-percpu-ipi resched6
304: 0 0 0 0 0
0 1222899 0 xen-percpu-ipi callfunc6
305: 0 0 0 0 0
0 0 0 xen-percpu-virq debug6
306: 0 0 0 0 0
0 5066 0 xen-percpu-ipi callfuncsingle6
307: 0 0 0 0 0
0 0 15633 xen-percpu-virq timer7
308: 0 0 0 0 0
0 0 5719 xen-percpu-ipi resched7
309: 0 0 0 0 0
0 0 1224195 xen-percpu-ipi callfunc7
310: 0 0 0 0 0
0 0 0 xen-percpu-virq debug7
311: 0 0 0 0 0
0 0 1522 xen-percpu-ipi callfuncsingle7
312: 2194 0 0 0 0
0 0 0 xen-dyn-event xenbus
313: 0 0 0 0 0
0 0 0 xen-percpu-virq pcpu
314: 0 0 0 0 0
0 0 0 xen-pirq-msi PCIe PME
316: 0 0 0 0 0
0 0 0 xen-pirq-msi PCIe PME
318: 325412 0 0 0 0
0 0 0 xen-pirq-msi sky2@pci:0000:0c:00.0
319: 451 0 0 0 0
0 0 0 xen-pirq-msi sky2@pci:0000:0d:00.0
320: 164703 0 0 0 0
0 0 0 xen-pirq-msi ahci
321: 1351 0 0 0 0
0 0 0 xen-dyn-event evtchn:xenstored
322: 1 0 0 0 0
0 0 0 xen-dyn-event evtchn:xenstored
323: 9 0 0 0 0
0 0 0 xen-dyn-event evtchn:xenstored
324: 1 0 0 0 0
0 0 0 xen-dyn-event evtchn:xenconsoled
325: 2417960 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
326: 1825452 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
327: 4102938 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
328: 1921778 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
329: 1556828 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
330: 1580859 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
331: 1633228 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
332: 1940019 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
333: 9 0 0 0 0
0 0 0 xen-dyn-event evtchn:xenstored
334: 1 0 0 0 0
0 0 0 xen-dyn-event evtchn:xenconsoled
335: 3718012 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
336: 3364579 0 0 0 0
0 0 0 xen-dyn-event evtchn:qemu-dm
NMI: 0 0 0 0 0
0 0 0 Non-maskable interrupts
LOC: 0 0 0 0 0
0 0 0 Local timer interrupts
SPU: 0 0 0 0 0
0 0 0 Spurious interrupts
PMI: 0 0 0 0 0
0 0 0 Performance monitoring interrupts
IWI: 0 0 0 0 0
0 0 0 IRQ work interrupts
RES: 261162 432314 134760 10685 6740
5756 7441 5732 Rescheduling interrupts
CAL: 28902 1211389 1281588 1224956 1227002
1225236 1227982 1225717 Function call interrupts
TLB: 0 0 0 0 0
0 0 0 TLB shootdowns
TRM: 0 0 0 0 0
0 0 0 Thermal event interrupts
THR: 0 0 0 0 0
0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0
0 0 0 Machine check exceptions
MCP: 0 0 0 0 0
0 0 0 Machine check polls
ERR: 0
MIS: 0
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 16:59 ` Liwei
@ 2011-06-27 17:33 ` Konrad Rzeszutek Wilk
2011-06-27 18:23 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-27 17:33 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Tue, Jun 28, 2011 at 12:59:04AM +0800, Liwei wrote:
> On 28 June 2011 00:32, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> > On Mon, Jun 27, 2011 at 11:12:43PM +0800, Liwei wrote:
> >>
> >> Does failure of the interpreter cause anything bad to happen? Common
> >
> > Well yes. It can't interpret the ACPI _PRT tables so the
> > interrupt routing information is not present.
> >
> > Which means that the drivers fall back to polling mode or end up
> > using the wrong IRQs.
> >
> ----snip----
> >> Yes I do:
> >>
> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
> >> [ 0.000000] ACPI: IRQ0 used by override.
> >> [ 0.000000] ACPI: IRQ2 used by override.
> >> [ 0.000000] ACPI: IRQ9 used by override.
> >> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> >> ----snip----
> >> [ 3.405497] Memory: 776452k/13631488k available (3239k kernel code,
> >> 3146184k absent, 9708852k reserved, 3423k data, 532k init)
> >> [ 3.405579] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
> >> CPUs=8, Nodes=1
> >> [ 3.405616] Preemptible hierarchical RCU implementation.
> >> [ 3.405630] NR_IRQS:33024 nr_irqs:2048 16
> >> [ 3.405705] xen: sci override: global_irq=20 trigger=0 polarity=1
> >> [ 3.405708] xen: registering gsi 20 triggering 0 polarity 1
> >> [ 3.405721] xen: --> pirq=20 -> irq=20
> >> [ 3.405728] xen: acpi sci 20
> >
> > Whoa. 20. That is unusual, but we do set it up. Perhaps ineptly thought.
> > Is there an option in the BIOS to toggle some ACPI SCI option?
>
> Did a reboot and checked the BIOS menus. Nothing about SCI in there.
> Is the SCI requirement something new in the 2.6.39+ kernels? Because
No.
> things are working well with 2.6.32.
Hmm. Can you attach the full serial log and on the Linux kernel line have
'loglevel=10 debug initcall_debug' please?
Is the serial log when running under 2.6.32 any different? (up to the ACPI interpretter
blowing up)? What does the /proc/interrupts look under 2.6.32?
>
> >
> > Does /proc/interrupts have this for IRQ 20:
> >
> > 9: 3 0 0 0 0 0 xen-pirq-ioapic-level acpi
> >
> > ?
>
> Nope, IRQ 20 or any acpi related interrupts doesn't show up:
>
> CPU0 CPU1 CPU2 CPU3 CPU4
> CPU5 CPU6 CPU7
> 1: 4 0 0 0 0
> 0 0 0 xen-pirq-ioapic-edge i8042
> 3: 0 0 0 0 0
> 0 0 0 xen-pirq-ioapic-edge mvsas
> 5: 0 0 0 0 0
> 0 0 0 xen-pirq-ioapic-edge mvsas
> 8: 3 0 0 0 0
> 0 0 0 xen-pirq-ioapic-edge rtc0
> 10: 0 0 0 0 0
> 0 0 0 xen-pirq-ioapic-edge mvsas
> 11: 0 0 0 0 0
> 0 0 0 xen-pirq-ioapic-edge mvsas
> 12: 6 0 0 0 0
> 0 0 0 xen-pirq-ioapic-edge i8042
Yeah, that is messed up.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 17:33 ` Konrad Rzeszutek Wilk
@ 2011-06-27 18:23 ` Liwei
2011-06-27 18:59 ` Konrad Rzeszutek Wilk
2011-06-27 19:10 ` Konrad Rzeszutek Wilk
0 siblings, 2 replies; 24+ messages in thread
From: Liwei @ 2011-06-27 18:23 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 687 bytes --]
On 28 June 2011 01:33, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
>
> Hmm. Can you attach the full serial log and on the Linux kernel line have
> 'loglevel=10 debug initcall_debug' please?
See attached.
>
> Is the serial log when running under 2.6.32 any different? (up to the ACPI interpretter
> blowing up)? What does the /proc/interrupts look under 2.6.32?
There's too much noise for me to compare, but I think they're more or
less the same until the the interpreter blows up for 3.0 whereas
2.6.32 does not.
I've attached the /proc/interrupts dump for both kernel versions. The
difference to note is that IRQ 20 does appear in 2.6.32.
Also attached is the xen dmesg.
[-- Attachment #2: log-2.6.32.41-dmesg --]
[-- Type: application/octet-stream, Size: 124265 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.41-custom-xen-amd64 (root@localhost) (gcc version 4.6.1 20110526 (prerelease) (Debian 4.6.0-10) ) #1 SMP PREEMPT Sat Jun 25 06:01:46 SGT 2011
[ 0.000000] Command line: placeholder root=/dev/mapper/VMStore-dom0 ro loglevel=10 debug initcall_debug quiet nomodeset xen-pciback.permissive xen-pciback.hide=(01:00.0)(01:00.1)(00:1a.0)(00:1b.0)(00:1d.0)(0f:03.0) pci=resource_alignment=01:00.0;01:00.1;00:1a.0;00:1b.0;00:1d.0;0f:03.0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] Xen: 000000000009e400 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 0000000040000000 - 000000009f780000 (unusable)
[ 0.000000] Xen: 000000009f780000 - 000000009f78e000 (ACPI data)
[ 0.000000] Xen: 000000009f78e000 - 000000009f7d0000 (ACPI NVS)
[ 0.000000] Xen: 000000009f7d0000 - 000000009f7e0000 (reserved)
[ 0.000000] Xen: 000000009f7ed000 - 00000000a0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 0325d000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 4k
[ 0.000000] kernel direct mapping tables up to 340000000 @ 347d000-4e8b000
[ 0.000000] RAMDISK: 0176f000 - 0325ca00
[ 0.000000] ACPI: RSDP 00000000000f9aa0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000009f780100 0005C (v01 090909 XSDT1600 20090909 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000009f780290 000F4 (v04 090909 FACP1600 20090909 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000009f780460 05910 (v02 1E659 1E659A27 00000A27 INTL 20051117)
[ 0.000000] ACPI: FACS 000000009f78e000 00040
[ 0.000000] ACPI: APIC 000000009f780390 0008C (v02 090909 APIC1600 20090909 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000009f780420 0003C (v01 090909 OEMMCFG 20090909 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000009f78e040 00072 (v01 090909 OEMB1600 20090909 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000009f78a460 00038 (v01 090909 OEMHPET 20090909 MSFT 00000097)
[ 0.000000] ACPI: XMAR 000000009f78e0c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000009f790e30 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to flat.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000340000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000340000000
[ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000007ffff] pages 68
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000345e000 - 000347d000] XEN PAGETABLES ==> [000345e000 - 000347d000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001644594] TEXT DATA BSS ==> [0001000000 - 0001644594]
[ 0.000000] #4 [000176f000 - 000325ca00] RAMDISK ==> [000176f000 - 000325ca00]
[ 0.000000] #5 [000325d000 - 000345e000] XEN START INFO ==> [000325d000 - 000345e000]
[ 0.000000] #6 [0100000000 - 0340000000] XEN EXTRA ==> [0100000000 - 0340000000]
[ 0.000000] #7 [0001645000 - 00016510f3] BRK ==> [0001645000 - 00016510f3]
[ 0.000000] #8 [0000100000 - 00002e0000] PGTABLE ==> [0000100000 - 00002e0000]
[ 0.000000] #9 [000347d000 - 0004686000] PGTABLE ==> [000347d000 - 0004686000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 2621326
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 483 pages reserved
[ 0.000000] DMA zone: 3443 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to flat.
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 20
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 000000009f780000
[ 0.000000] PM: Registered nosave memory: 000000009f780000 - 000000009f78e000
[ 0.000000] PM: Registered nosave memory: 000000009f78e000 - 000000009f7d0000
[ 0.000000] PM: Registered nosave memory: 000000009f7d0000 - 000000009f7e0000
[ 0.000000] PM: Registered nosave memory: 000000009f7e0000 - 000000009f7ed000
[ 0.000000] PM: Registered nosave memory: 000000009f7ed000 - 00000000a0000000
[ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000d1ff000 s90648 r8192 d24040 u122880
[ 0.000000] pcpu-alloc: s90648 r8192 d24040 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 3.475364] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2574251
[ 3.475366] Policy zone: Normal
[ 3.475369] Kernel command line: placeholder root=/dev/mapper/VMStore-dom0 ro loglevel=10 debug initcall_debug quiet nomodeset xen-pciback.permissive xen-pciback.hide=(01:00.0)(01:00.1)(00:1a.0)(00:1b.0)(00:1d.0)(0f:03.0) pci=resource_alignment=01:00.0;01:00.1;00:1a.0;00:1b.0;00:1d.0;0f:03.0
[ 3.475415] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.475672] Initializing CPU#0
[ 3.481810] DMA: Placing 64MB software IO TLB between ffff88000d2f8000 - ffff8800112f8000
[ 3.481816] DMA: software IO TLB at phys 0xd2f8000 - 0x112f8000
[ 3.481818] xen_swiotlb_fixup: buf=ffff88000d2f8000 size=67108864
[ 3.499198] xen_swiotlb_fixup: buf=ffff880011358000 size=32768
[ 3.502524] Memory: 780540k/13631488k available (3123k kernel code, 3146184k absent, 9704764k reserved, 1789k data, 564k init)
[ 3.502551] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 3.502575] Experimental preemptable hierarchical RCU implementation.
[ 3.502585] NR_IRQS:4352 nr_irqs:2304
[ 3.502670] xen: --> irq=0
[ 3.502679] xen: --> irq=1
[ 3.502684] xen: --> irq=2
[ 3.502690] xen: --> irq=3
[ 3.502695] xen: --> irq=4
[ 3.502700] xen: --> irq=5
[ 3.502706] xen: --> irq=6
[ 3.502711] xen: --> irq=7
[ 3.502716] xen: --> irq=8
[ 3.502721] xen: --> irq=9
[ 3.502727] xen: --> irq=10
[ 3.502732] xen: --> irq=11
[ 3.502737] xen: --> irq=12
[ 3.502743] xen: --> irq=13
[ 3.502748] xen: --> irq=14
[ 3.502753] xen: --> irq=15
[ 3.502768] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 3.502771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 3.502773] xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3
[ 3.502775] xen: registering gsi 20 triggering 0 polarity 1
[ 3.502780] alloc irq_desc for 20 on node 0
[ 3.502784] alloc kstat_irqs on node 0
[ 3.502788] xen: --> irq=20
[ 3.502795] xen: acpi sci 20
[ 3.508158] Console: colour VGA+ 80x25
[ 3.508255] console [tty0] enabled
[ 3.508279] Xen: using vcpuop timer interface
[ 3.508282] installing Xen timer for CPU 0
[ 3.508288] alloc irq_desc for 2303 on node -1
[ 3.508290] alloc kstat_irqs on node -1
[ 3.508306] Detected 2929.740 MHz processor.
[ 3.508313] Calibrating delay loop (skipped), value calculated using timer frequency.. 5861.62 BogoMIPS (lpj=9765800)
[ 3.508326] Security Framework initialized
[ 3.508329] SELinux: Disabled at boot.
[ 3.510509] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 3.514232] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 3.515522] Mount-cache hash table entries: 256
[ 3.515642] Initializing cgroup subsys cpuacct
[ 3.515646] Initializing cgroup subsys devices
[ 3.515649] Initializing cgroup subsys freezer
[ 3.515651] Initializing cgroup subsys net_cls
[ 3.515682] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.515684] CPU: L2 cache: 256K
[ 3.515686] CPU: L3 cache: 8192K
[ 3.515689] CPU 0/0x0 -> Node 0
[ 3.515692] CPU: Unsupported number of siblings 16
[ 3.515695] mce: CPU supports 9 MCE banks
[ 3.515716] Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only.
[ 3.515729] SMP alternatives: switching to UP code
[ 3.526562] ACPI: Core revision 20090903
[ 3.556252] alloc irq_desc for 2302 on node -1
[ 3.556255] alloc kstat_irqs on node -1
[ 3.556262] alloc irq_desc for 2301 on node -1
[ 3.556264] alloc kstat_irqs on node -1
[ 3.556268] alloc irq_desc for 2300 on node -1
[ 3.556270] alloc kstat_irqs on node -1
[ 3.556274] alloc irq_desc for 2299 on node -1
[ 3.556276] alloc kstat_irqs on node -1
[ 3.556317] calling migration_init+0x0/0x4b @ 1
[ 3.559625] initcall migration_init+0x0/0x4b returned 0 after 3255 usecs
[ 3.559633] calling spawn_ksoftirqd+0x0/0x4b @ 1
[ 3.563019] initcall spawn_ksoftirqd+0x0/0x4b returned 0 after 3255 usecs
[ 3.563027] calling init_call_single_data+0x0/0x7b @ 1
[ 3.563034] initcall init_call_single_data+0x0/0x7b returned 0 after 0 usecs
[ 3.563041] calling spawn_softlockup_task+0x0/0x67 @ 1
[ 3.566415] initcall spawn_softlockup_task+0x0/0x67 returned 0 after 3255 usecs
[ 3.566423] calling relay_init+0x0/0x11 @ 1
[ 3.566429] initcall relay_init+0x0/0x11 returned 0 after 0 usecs
[ 3.566435] calling tracer_alloc_buffers+0x0/0x168 @ 1
[ 3.566467] initcall tracer_alloc_buffers+0x0/0x168 returned 0 after 0 usecs
[ 3.566473] calling init_trace_printk+0x0/0xc @ 1
[ 3.566480] initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs
[ 3.576618] installing Xen timer for CPU 1
[ 3.576626] alloc irq_desc for 2298 on node -1
[ 3.576630] alloc kstat_irqs on node -1
[ 3.576679] SMP alternatives: switching to SMP code
[ 3.587231] alloc irq_desc for 2297 on node -1
[ 3.587233] alloc kstat_irqs on node -1
[ 3.587245] alloc irq_desc for 2296 on node -1
[ 3.587247] alloc kstat_irqs on node -1
[ 3.587251] alloc irq_desc for 2295 on node -1
[ 3.587253] alloc kstat_irqs on node -1
[ 3.587257] alloc irq_desc for 2294 on node -1
[ 3.587259] alloc kstat_irqs on node -1
[ 3.587272] Initializing CPU#1
[ 3.587312] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.587315] CPU: L2 cache: 256K
[ 3.587317] CPU: L3 cache: 8192K
[ 3.587321] CPU 1/0x0 -> Node 0
[ 3.587323] CPU: Unsupported number of siblings 16
[ 3.597464] installing Xen timer for CPU 2
[ 3.597472] alloc irq_desc for 2293 on node -1
[ 3.597477] alloc kstat_irqs on node -1
[ 3.597524] alloc irq_desc for 2292 on node -1
[ 3.597526] alloc kstat_irqs on node -1
[ 3.597531] alloc irq_desc for 2291 on node -1
[ 3.597533] alloc kstat_irqs on node -1
[ 3.597537] alloc irq_desc for 2290 on node -1
[ 3.597539] alloc kstat_irqs on node -1
[ 3.597543] alloc irq_desc for 2289 on node -1
[ 3.597545] alloc kstat_irqs on node -1
[ 3.597555] Initializing CPU#2
[ 3.597589] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.597591] CPU: L2 cache: 256K
[ 3.597592] CPU: L3 cache: 8192K
[ 3.597595] CPU 2/0x0 -> Node 0
[ 3.597597] CPU: Unsupported number of siblings 16
[ 3.607669] installing Xen timer for CPU 3
[ 3.607677] alloc irq_desc for 2288 on node -1
[ 3.607682] alloc kstat_irqs on node -1
[ 3.607729] alloc irq_desc for 2287 on node -1
[ 3.607731] alloc kstat_irqs on node -1
[ 3.607735] alloc irq_desc for 2286 on node -1
[ 3.607737] alloc kstat_irqs on node -1
[ 3.607741] alloc irq_desc for 2285 on node -1
[ 3.607743] alloc kstat_irqs on node -1
[ 3.607748] alloc irq_desc for 2284 on node -1
[ 3.607749] alloc kstat_irqs on node -1
[ 3.607759] Initializing CPU#3
[ 3.607787] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.607789] CPU: L2 cache: 256K
[ 3.607790] CPU: L3 cache: 8192K
[ 3.607793] CPU 3/0x0 -> Node 0
[ 3.607795] CPU: Unsupported number of siblings 16
[ 3.617874] installing Xen timer for CPU 4
[ 3.617883] alloc irq_desc for 2283 on node -1
[ 3.617887] alloc kstat_irqs on node -1
[ 3.617932] alloc irq_desc for 2282 on node -1
[ 3.617934] alloc kstat_irqs on node -1
[ 3.617938] alloc irq_desc for 2281 on node -1
[ 3.617940] alloc kstat_irqs on node -1
[ 3.617945] alloc irq_desc for 2280 on node -1
[ 3.617946] alloc kstat_irqs on node -1
[ 3.617951] alloc irq_desc for 2279 on node -1
[ 3.617953] alloc kstat_irqs on node -1
[ 3.617963] Initializing CPU#4
[ 3.617994] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.617996] CPU: L2 cache: 256K
[ 3.617997] CPU: L3 cache: 8192K
[ 3.618000] CPU 4/0x0 -> Node 0
[ 3.618002] CPU: Unsupported number of siblings 16
[ 3.628073] installing Xen timer for CPU 5
[ 3.628081] alloc irq_desc for 2278 on node -1
[ 3.628086] alloc kstat_irqs on node -1
[ 3.628135] alloc irq_desc for 2277 on node -1
[ 3.628137] alloc kstat_irqs on node -1
[ 3.628141] alloc irq_desc for 2276 on node -1
[ 3.628143] alloc kstat_irqs on node -1
[ 3.628150] alloc irq_desc for 2275 on node -1
[ 3.628152] alloc kstat_irqs on node -1
[ 3.628156] alloc irq_desc for 2274 on node -1
[ 3.628158] alloc kstat_irqs on node -1
[ 3.628167] Initializing CPU#5
[ 3.628196] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.628198] CPU: L2 cache: 256K
[ 3.628199] CPU: L3 cache: 8192K
[ 3.628202] CPU 5/0x0 -> Node 0
[ 3.628203] CPU: Unsupported number of siblings 16
[ 3.638281] installing Xen timer for CPU 6
[ 3.638289] alloc irq_desc for 2273 on node -1
[ 3.638294] alloc kstat_irqs on node -1
[ 3.638341] alloc irq_desc for 2272 on node -1
[ 3.638343] alloc kstat_irqs on node -1
[ 3.638350] alloc irq_desc for 2271 on node -1
[ 3.638352] alloc kstat_irqs on node -1
[ 3.638356] alloc irq_desc for 2270 on node -1
[ 3.638358] alloc kstat_irqs on node -1
[ 3.638363] alloc irq_desc for 2269 on node -1
[ 3.638364] alloc kstat_irqs on node -1
[ 3.638374] Initializing CPU#6
[ 3.638404] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.638407] CPU: L2 cache: 256K
[ 3.638408] CPU: L3 cache: 8192K
[ 3.638411] CPU 6/0x0 -> Node 0
[ 3.638413] CPU: Unsupported number of siblings 16
[ 3.648488] installing Xen timer for CPU 7
[ 3.648496] alloc irq_desc for 2268 on node -1
[ 3.648501] alloc kstat_irqs on node -1
[ 3.648546] alloc irq_desc for 2267 on node -1
[ 3.648548] alloc kstat_irqs on node -1
[ 3.648553] alloc irq_desc for 2266 on node -1
[ 3.648555] alloc kstat_irqs on node -1
[ 3.648559] alloc irq_desc for 2265 on node -1
[ 3.648561] alloc kstat_irqs on node -1
[ 3.648565] alloc irq_desc for 2264 on node -1
[ 3.648567] alloc kstat_irqs on node -1
[ 3.648575] Initializing CPU#7
[ 3.648603] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.648605] CPU: L2 cache: 256K
[ 3.648606] CPU: L3 cache: 8192K
[ 3.648609] CPU 7/0x0 -> Node 0
[ 3.648611] CPU: Unsupported number of siblings 16
[ 3.648654] Brought up 8 CPUs
[ 3.648681] CPU0 attaching sched-domain:
[ 3.648683] domain 0: span 0-7 level CPU
[ 3.648686] groups: 0 1 2 3 4 5 6 7
[ 3.648697] CPU1 attaching sched-domain:
[ 3.648699] domain 0: span 0-7 level CPU
[ 3.648701] groups: 1 2 3 4 5 6 7 0
[ 3.648711] CPU2 attaching sched-domain:
[ 3.648713] domain 0: span 0-7 level CPU
[ 3.648715] groups: 2 3 4 5 6 7 0 1
[ 3.648725] CPU3 attaching sched-domain:
[ 3.648727] domain 0: span 0-7 level CPU
[ 3.648730] groups: 3 4 5 6 7 0 1 2
[ 3.648739] CPU4 attaching sched-domain:
[ 3.648741] domain 0: span 0-7 level CPU
[ 3.648744] groups: 4 5 6 7 0 1 2 3
[ 3.648754] CPU5 attaching sched-domain:
[ 3.648755] domain 0: span 0-7 level CPU
[ 3.648758] groups: 5 6 7 0 1 2 3 4
[ 3.648768] CPU6 attaching sched-domain:
[ 3.648769] domain 0: span 0-7 level CPU
[ 3.648772] groups: 6 7 0 1 2 3 4 5
[ 3.648782] CPU7 attaching sched-domain:
[ 3.648783] domain 0: span 0-7 level CPU
[ 3.648786] groups: 7 0 1 2 3 4 5 6
[ 3.649235] devtmpfs: initialized
[ 3.652234] calling init_mmap_min_addr+0x0/0x8 @ 1
[ 3.652237] initcall init_mmap_min_addr+0x0/0x8 returned 0 after 0 usecs
[ 3.652241] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[ 3.652245] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[ 3.652248] calling net_ns_init+0x0/0xec @ 1
[ 3.652298] initcall net_ns_init+0x0/0xec returned 0 after 0 usecs
[ 3.652303] calling e820_mark_nvs_memory+0x0/0x36 @ 1
[ 3.652322] initcall e820_mark_nvs_memory+0x0/0x36 returned 0 after 0 usecs
[ 3.652326] calling cpufreq_tsc+0x0/0x26 @ 1
[ 3.652328] initcall cpufreq_tsc+0x0/0x26 returned 0 after 0 usecs
[ 3.652331] calling pci_reboot_init+0x0/0x11 @ 1
[ 3.652334] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 3.652337] calling init_lapic_sysfs+0x0/0x2d @ 1
[ 3.652347] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
[ 3.652351] calling alloc_frozen_cpus+0x0/0x3 @ 1
[ 3.652354] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs
[ 3.652357] calling sysctl_init+0x0/0x2f @ 1
[ 3.652451] initcall sysctl_init+0x0/0x2f returned 0 after 0 usecs
[ 3.652454] calling ksysfs_init+0x0/0x8a @ 1
[ 3.652461] initcall ksysfs_init+0x0/0x8a returned 0 after 0 usecs
[ 3.652463] calling async_init+0x0/0x56 @ 1
[ 3.652503] initcall async_init+0x0/0x56 returned 0 after 0 usecs
[ 3.652507] calling init_jiffies_clocksource+0x0/0xc @ 1
[ 3.652511] initcall init_jiffies_clocksource+0x0/0xc returned 0 after 0 usecs
[ 3.652515] calling pm_init+0x0/0x5d @ 1
[ 3.652559] initcall pm_init+0x0/0x5d returned 0 after 0 usecs
[ 3.652563] calling pm_disk_init+0x0/0x13 @ 1
[ 3.652567] initcall pm_disk_init+0x0/0x13 returned 0 after 0 usecs
[ 3.652572] calling swsusp_header_init+0x0/0x29 @ 1
[ 3.652575] initcall swsusp_header_init+0x0/0x29 returned 0 after 0 usecs
[ 3.652579] calling init_zero_pfn+0x0/0x32 @ 1
[ 3.652581] initcall init_zero_pfn+0x0/0x32 returned 0 after 0 usecs
[ 3.652584] calling filelock_init+0x0/0x2b @ 1
[ 3.652587] initcall filelock_init+0x0/0x2b returned 0 after 0 usecs
[ 3.652590] calling init_script_binfmt+0x0/0xe @ 1
[ 3.652592] initcall init_script_binfmt+0x0/0xe returned 0 after 0 usecs
[ 3.652595] calling init_elf_binfmt+0x0/0xe @ 1
[ 3.652597] initcall init_elf_binfmt+0x0/0xe returned 0 after 0 usecs
[ 3.652599] calling init_compat_elf_binfmt+0x0/0xe @ 1
[ 3.652602] initcall init_compat_elf_binfmt+0x0/0xe returned 0 after 0 usecs
[ 3.652604] calling debugfs_init+0x0/0x50 @ 1
[ 3.652609] initcall debugfs_init+0x0/0x50 returned 0 after 0 usecs
[ 3.652611] calling securityfs_init+0x0/0x47 @ 1
[ 3.652615] initcall securityfs_init+0x0/0x47 returned 0 after 0 usecs
[ 3.652618] calling random32_init+0x0/0xcb @ 1
[ 3.652621] initcall random32_init+0x0/0xcb returned 0 after 0 usecs
[ 3.652625] calling __gnttab_init+0x0/0x1d @ 1
[ 3.652637] Grant table initialized
[ 3.652640] initcall __gnttab_init+0x0/0x1d returned 0 after 0 usecs
[ 3.652643] calling regulator_init+0x0/0x2a @ 1
[ 3.652644] regulator: core version 0.5
[ 3.652651] initcall regulator_init+0x0/0x2a returned 0 after 0 usecs
[ 3.652653] calling cpufreq_core_init+0x0/0x8d @ 1
[ 3.652658] initcall cpufreq_core_init+0x0/0x8d returned 0 after 0 usecs
[ 3.652660] calling cpuidle_init+0x0/0x36 @ 1
[ 3.652665] initcall cpuidle_init+0x0/0x36 returned 0 after 0 usecs
[ 3.652667] calling sock_init+0x0/0x5b @ 1
[ 3.652696] initcall sock_init+0x0/0x5b returned 0 after 0 usecs
[ 3.652699] calling net_inuse_init+0x0/0x23 @ 1
[ 3.652704] initcall net_inuse_init+0x0/0x23 returned 0 after 0 usecs
[ 3.652706] calling netpoll_init+0x0/0x2c @ 1
[ 3.652709] initcall netpoll_init+0x0/0x2c returned 0 after 0 usecs
[ 3.652712] calling netlink_proto_init+0x0/0x13e @ 1
[ 3.652719] NET: Registered protocol family 16
[ 3.652729] initcall netlink_proto_init+0x0/0x13e returned 0 after 0 usecs
[ 3.652732] calling bdi_class_init+0x0/0x3f @ 1
[ 3.652747] initcall bdi_class_init+0x0/0x3f returned 0 after 0 usecs
[ 3.652750] calling kobject_uevent_init+0x0/0x51 @ 1
[ 3.652754] initcall kobject_uevent_init+0x0/0x51 returned 0 after 0 usecs
[ 3.652757] calling pcibus_class_init+0x0/0x13 @ 1
[ 3.652766] initcall pcibus_class_init+0x0/0x13 returned 0 after 0 usecs
[ 3.652768] calling pci_driver_init+0x0/0xc @ 1
[ 3.652781] initcall pci_driver_init+0x0/0xc returned 0 after 0 usecs
[ 3.652784] calling backlight_class_init+0x0/0x5a @ 1
[ 3.652791] initcall backlight_class_init+0x0/0x5a returned 0 after 0 usecs
[ 3.652794] calling xenbus_init+0x0/0x239 @ 1
[ 3.652799] alloc irq_desc for 2263 on node -1
[ 3.652801] alloc kstat_irqs on node -1
[ 3.652888] initcall xenbus_init+0x0/0x239 returned 0 after 0 usecs
[ 3.652892] calling tty_class_init+0x0/0x33 @ 1
[ 3.652902] initcall tty_class_init+0x0/0x33 returned 0 after 0 usecs
[ 3.652905] calling vtconsole_class_init+0x0/0xd7 @ 1
[ 3.652924] initcall vtconsole_class_init+0x0/0xd7 returned 0 after 0 usecs
[ 3.652927] calling register_node_type+0x0/0x3f @ 1
[ 3.652935] initcall register_node_type+0x0/0x3f returned 0 after 0 usecs
[ 3.652938] calling spi_init+0x0/0xaf @ 1
[ 3.652952] initcall spi_init+0x0/0xaf returned 0 after 0 usecs
[ 3.652955] calling amd_postcore_init+0x0/0x74 @ 1
[ 3.652957] initcall amd_postcore_init+0x0/0x74 returned 0 after 0 usecs
[ 3.652961] calling arch_kdebugfs_init+0x0/0x21 @ 1
[ 3.652966] initcall arch_kdebugfs_init+0x0/0x21 returned 0 after 0 usecs
[ 3.652968] calling mtrr_if_init+0x0/0x58 @ 1
[ 3.652972] initcall mtrr_if_init+0x0/0x58 returned 0 after 0 usecs
[ 3.652975] calling ffh_cstate_init+0x0/0x27 @ 1
[ 3.652979] initcall ffh_cstate_init+0x0/0x27 returned 0 after 0 usecs
[ 3.652982] calling acpi_pci_init+0x0/0x5b @ 1
[ 3.652984] ACPI: bus type pci registered
[ 3.652986] initcall acpi_pci_init+0x0/0x5b returned 0 after 0 usecs
[ 3.652989] calling xen_pcpu_init+0x0/0x9b @ 1
[ 3.653002] sync cpu 0 get result 1 max_id 7
[ 3.653010] sync cpu 1 get result 1 max_id 7
[ 3.653018] sync cpu 2 get result 1 max_id 7
[ 3.653025] sync cpu 3 get result 1 max_id 7
[ 3.653032] sync cpu 4 get result 1 max_id 7
[ 3.653042] sync cpu 5 get result 1 max_id 7
[ 3.653050] sync cpu 6 get result 1 max_id 7
[ 3.653061] sync cpu 7 get result 1 max_id 7
[ 3.653064] alloc irq_desc for 2262 on node -1
[ 3.653065] alloc kstat_irqs on node -1
[ 3.653076] initcall xen_pcpu_init+0x0/0x9b returned 2262 after 0 usecs
[ 3.653078] initcall xen_pcpu_init+0x0/0x9b returned with error code 2262
[ 3.653081] calling register_xen_pci_notifier+0x0/0x1f @ 1
[ 3.653083] initcall register_xen_pci_notifier+0x0/0x1f returned 0 after 0 usecs
[ 3.653086] calling setup_vcpu_hotplug_event+0x0/0x1f @ 1
[ 3.653089] initcall setup_vcpu_hotplug_event+0x0/0x1f returned 0 after 0 usecs
[ 3.653091] calling dmi_id_init+0x0/0x323 @ 1
[ 3.653121] initcall dmi_id_init+0x0/0x323 returned 0 after 0 usecs
[ 3.653124] calling dma_bus_init+0x0/0x3b @ 1
[ 3.653131] initcall dma_bus_init+0x0/0x3b returned 0 after 0 usecs
[ 3.653133] calling dma_channel_table_init+0x0/0xcb @ 1
[ 3.653142] initcall dma_channel_table_init+0x0/0xcb returned 0 after 0 usecs
[ 3.653145] calling pci_arch_init+0x0/0x56 @ 1
[ 3.653171] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 3.653173] PCI: Not using MMCONFIG.
[ 3.653175] PCI: Using configuration type 1 for base access
[ 3.653180] initcall pci_arch_init+0x0/0x56 returned 0 after 0 usecs
[ 3.653183] calling topology_init+0x0/0x87 @ 1
[ 3.653401] initcall topology_init+0x0/0x87 returned 0 after 0 usecs
[ 3.653404] calling mtrr_init_finialize+0x0/0x3b @ 1
[ 3.653406] initcall mtrr_init_finialize+0x0/0x3b returned 0 after 0 usecs
[ 3.653409] calling param_sysfs_init+0x0/0x269 @ 1
[ 3.653699] initcall param_sysfs_init+0x0/0x269 returned 0 after 0 usecs
[ 3.653702] calling pm_sysrq_init+0x0/0x16 @ 1
[ 3.653705] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[ 3.653708] calling audit_watch_init+0x0/0x2c @ 1
[ 3.653711] initcall audit_watch_init+0x0/0x2c returned 0 after 0 usecs
[ 3.653714] calling init_slow_work+0x0/0x34 @ 1
[ 3.653717] initcall init_slow_work+0x0/0x34 returned 0 after 0 usecs
[ 3.653719] calling default_bdi_init+0x0/0xa7 @ 1
[ 3.653821] initcall default_bdi_init+0x0/0xa7 returned 0 after 0 usecs
[ 3.653825] calling init_bio+0x0/0xc6 @ 1
[ 3.654094] bio: create slab <bio-0> at 0
[ 3.654103] initcall init_bio+0x0/0xc6 returned 0 after 0 usecs
[ 3.654105] calling fsnotify_init+0x0/0xc @ 1
[ 3.654109] initcall fsnotify_init+0x0/0xc returned 0 after 0 usecs
[ 3.654111] calling fsnotify_notification_init+0x0/0xed @ 1
[ 3.654116] initcall fsnotify_notification_init+0x0/0xed returned 0 after 0 usecs
[ 3.654118] calling cryptomgr_init+0x0/0xc @ 1
[ 3.654121] initcall cryptomgr_init+0x0/0xc returned 0 after 0 usecs
[ 3.654123] calling blk_settings_init+0x0/0x25 @ 1
[ 3.654126] initcall blk_settings_init+0x0/0x25 returned 0 after 0 usecs
[ 3.654128] calling blk_ioc_init+0x0/0x27 @ 1
[ 3.654131] initcall blk_ioc_init+0x0/0x27 returned 0 after 0 usecs
[ 3.654134] calling blk_softirq_init+0x0/0x6a @ 1
[ 3.654137] initcall blk_softirq_init+0x0/0x6a returned 0 after 0 usecs
[ 3.654139] calling blk_iopoll_setup+0x0/0x68 @ 1
[ 3.654142] initcall blk_iopoll_setup+0x0/0x68 returned 0 after 0 usecs
[ 3.654144] calling genhd_device_init+0x0/0x71 @ 1
[ 3.654420] initcall genhd_device_init+0x0/0x71 returned 0 after 0 usecs
[ 3.654423] calling blk_dev_integrity_init+0x0/0x27 @ 1
[ 3.654426] initcall blk_dev_integrity_init+0x0/0x27 returned 0 after 0 usecs
[ 3.654429] calling gpiolib_debugfs_init+0x0/0x21 @ 1
[ 3.654434] initcall gpiolib_debugfs_init+0x0/0x21 returned 0 after 0 usecs
[ 3.654437] calling pci_slot_init+0x0/0x43 @ 1
[ 3.654444] initcall pci_slot_init+0x0/0x43 returned 0 after 0 usecs
[ 3.654447] calling fbmem_init+0x0/0x95 @ 1
[ 3.654459] initcall fbmem_init+0x0/0x95 returned 0 after 0 usecs
[ 3.654462] calling acpi_init+0x0/0x2ba @ 1
[ 3.655648] ERROR: Unable to locate IOAPIC for GSI 20
[ 3.655712] ACPI: EC: Look up EC in DSDT
[ 3.658372] ACPI: Executed 1 blocks of module-level executable AML code
[ 3.666155] ACPI: Interpreter enabled
[ 3.666158] ACPI: (supports S0 S1 S3 S4 S5)
[ 3.666190] ACPI: Using IOAPIC for interrupt routing
[ 3.666241] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 3.668016] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 3.690138] PCI: Using MMCONFIG at e0000000 - efffffff
[ 3.699056] initcall acpi_init+0x0/0x2ba returned 0 after 42317 usecs
[ 3.699060] calling dock_init+0x0/0x8c @ 1
[ 3.699208] ACPI: No dock devices found.
[ 3.699211] initcall dock_init+0x0/0x8c returned 0 after 0 usecs
[ 3.699214] calling acpi_pci_root_init+0x0/0x22 @ 1
[ 3.699573] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 3.699799] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 3.699804] pci 0000:00:03.0: PME# disabled
[ 3.700003] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 3.700008] pci 0000:00:05.0: PME# disabled
[ 3.700585] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbffc000-0xfbffc3ff]
[ 3.700638] pci 0000:00:1a.0: Disabling memory decoding and releasing memory resources.
[ 3.700645] pci 0000:00:1a.0: Rounding up size of resource #0 to 0x1000.
[ 3.700685] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 3.700691] pci 0000:00:1a.0: PME# disabled
[ 3.700760] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff]
[ 3.700801] pci 0000:00:1b.0: Disabling memory decoding and releasing memory resources.
[ 3.700841] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 3.700846] pci 0000:00:1b.0: PME# disabled
[ 3.700957] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.700962] pci 0000:00:1c.0: PME# disabled
[ 3.701081] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 3.701086] pci 0000:00:1c.4: PME# disabled
[ 3.701199] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 3.701205] pci 0000:00:1c.5: PME# disabled
[ 3.701320] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 3.701325] pci 0000:00:1c.7: PME# disabled
[ 3.701410] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbff6000-0xfbff63ff]
[ 3.701462] pci 0000:00:1d.0: Disabling memory decoding and releasing memory resources.
[ 3.701470] pci 0000:00:1d.0: Rounding up size of resource #0 to 0x1000.
[ 3.701510] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 3.701516] pci 0000:00:1d.0: PME# disabled
[ 3.701826] pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
[ 3.701835] pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
[ 3.701844] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
[ 3.701852] pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
[ 3.701861] pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe41f]
[ 3.701870] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbff4000-0xfbff47ff]
[ 3.701928] pci 0000:00:1f.2: PME# supported from D3hot
[ 3.701933] pci 0000:00:1f.2: PME# disabled
[ 3.701981] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbff2000-0xfbff20ff]
[ 3.702004] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 3.702091] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 3.702107] pci 0000:01:00.0: reg 18 64bit mmio: [0xfa6e0000-0xfa6fffff]
[ 3.702116] pci 0000:01:00.0: reg 20 io port: [0x7000-0x70ff]
[ 3.702132] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfa6c0000-0xfa6dffff]
[ 3.702139] pci 0000:01:00.0: Disabling memory decoding and releasing memory resources.
[ 3.702175] pci 0000:01:00.0: supports D1 D2
[ 3.702240] pci 0000:01:00.1: reg 10 64bit mmio: [0xfa6bc000-0xfa6bffff]
[ 3.702281] pci 0000:01:00.1: Disabling memory decoding and releasing memory resources.
[ 3.702318] pci 0000:01:00.1: supports D1 D2
[ 3.706257] pci 0000:00:03.0: bridge io port: [0x5000-0x7fff]
[ 3.706264] pci 0000:00:03.0: bridge 32bit mmio: [0xfa600000-0xfa6fffff]
[ 3.706272] pci 0000:00:03.0: bridge 64bit mmio pref: [0xbff00000-0xdfefffff]
[ 3.706367] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 3.706372] pci 0000:02:00.0: PME# disabled
[ 3.713025] pci 0000:00:05.0: bridge io port: [0x8000-0xbfff]
[ 3.713031] pci 0000:00:05.0: bridge 32bit mmio: [0xfa700000-0xfbbfffff]
[ 3.713131] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 3.713136] pci 0000:03:00.0: PME# disabled
[ 3.713241] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 3.713247] pci 0000:03:02.0: PME# disabled
[ 3.713327] pci 0000:02:00.0: bridge io port: [0x8000-0xbfff]
[ 3.713333] pci 0000:02:00.0: bridge 32bit mmio: [0xfa700000-0xfbbfffff]
[ 3.713407] pci 0000:04:00.0: reg 10 64bit mmio: [0xfb7ff000-0xfb7fffff]
[ 3.713425] pci 0000:04:00.0: reg 18 64bit mmio: [0xfa800000-0xfaffffff]
[ 3.713443] pci 0000:04:00.0: reg 20 64bit mmio: [0xfb7fe000-0xfb7fefff]
[ 3.713453] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfb780000-0xfb7bffff]
[ 3.713507] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 3.713513] pci 0000:04:00.0: PME# disabled
[ 3.719869] pci 0000:03:00.0: bridge 32bit mmio: [0xfa700000-0xfb7fffff]
[ 3.719986] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 3.719993] pci 0000:05:00.0: PME# disabled
[ 3.726628] pci 0000:03:02.0: bridge io port: [0x8000-0xbfff]
[ 3.726636] pci 0000:03:02.0: bridge 32bit mmio: [0xfb800000-0xfbbfffff]
[ 3.726760] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[ 3.726767] pci 0000:06:02.0: PME# disabled
[ 3.726900] pci 0000:06:03.0: PME# supported from D0 D3hot D3cold
[ 3.726906] pci 0000:06:03.0: PME# disabled
[ 3.727048] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[ 3.727054] pci 0000:06:04.0: PME# disabled
[ 3.727207] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold
[ 3.727214] pci 0000:06:05.0: PME# disabled
[ 3.727330] pci 0000:05:00.0: bridge io port: [0x8000-0xbfff]
[ 3.727337] pci 0000:05:00.0: bridge 32bit mmio: [0xfb800000-0xfbbfffff]
[ 3.727434] pci 0000:07:00.0: reg 18 io port: [0x8c00-0x8c7f]
[ 3.727464] pci 0000:07:00.0: reg 20 64bit mmio: [0xfb8ff000-0xfb8fffff]
[ 3.727475] pci 0000:07:00.0: reg 30 32bit mmio pref: [0xfb880000-0xfb8bffff]
[ 3.727531] pci 0000:07:00.0: supports D1
[ 3.727533] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 3.727540] pci 0000:07:00.0: PME# disabled
[ 3.727582] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.727705] pci 0000:06:02.0: bridge io port: [0x8000-0x8fff]
[ 3.727711] pci 0000:06:02.0: bridge 32bit mmio: [0xfb800000-0xfb8fffff]
[ 3.727811] pci 0000:08:00.0: reg 18 io port: [0x9c00-0x9c7f]
[ 3.727840] pci 0000:08:00.0: reg 20 64bit mmio: [0xfb9ff000-0xfb9fffff]
[ 3.727852] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xfb980000-0xfb9bffff]
[ 3.727905] pci 0000:08:00.0: supports D1
[ 3.727907] pci 0000:08:00.0: PME# supported from D0 D1 D3hot
[ 3.727914] pci 0000:08:00.0: PME# disabled
[ 3.727956] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.728082] pci 0000:06:03.0: bridge io port: [0x9000-0x9fff]
[ 3.728088] pci 0000:06:03.0: bridge 32bit mmio: [0xfb900000-0xfb9fffff]
[ 3.728189] pci 0000:09:00.0: reg 18 io port: [0xac00-0xac7f]
[ 3.728219] pci 0000:09:00.0: reg 20 64bit mmio: [0xfbaff000-0xfbafffff]
[ 3.728230] pci 0000:09:00.0: reg 30 32bit mmio pref: [0xfba80000-0xfbabffff]
[ 3.728284] pci 0000:09:00.0: supports D1
[ 3.728286] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 3.728293] pci 0000:09:00.0: PME# disabled
[ 3.728335] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.728457] pci 0000:06:04.0: bridge io port: [0xa000-0xafff]
[ 3.728464] pci 0000:06:04.0: bridge 32bit mmio: [0xfba00000-0xfbafffff]
[ 3.728563] pci 0000:0a:00.0: reg 18 io port: [0xbc00-0xbc7f]
[ 3.728593] pci 0000:0a:00.0: reg 20 64bit mmio: [0xfbbff000-0xfbbfffff]
[ 3.728605] pci 0000:0a:00.0: reg 30 32bit mmio pref: [0xfbb80000-0xfbbbffff]
[ 3.728658] pci 0000:0a:00.0: supports D1
[ 3.728660] pci 0000:0a:00.0: PME# supported from D0 D1 D3hot
[ 3.728667] pci 0000:0a:00.0: PME# disabled
[ 3.728709] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.728831] pci 0000:06:05.0: bridge io port: [0xb000-0xbfff]
[ 3.728838] pci 0000:06:05.0: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
[ 3.729074] pci 0000:0c:00.0: reg 10 64bit mmio: [0xfbcfc000-0xfbcfffff]
[ 3.729085] pci 0000:0c:00.0: reg 18 io port: [0xc800-0xc8ff]
[ 3.729124] pci 0000:0c:00.0: reg 30 32bit mmio pref: [0xfbcc0000-0xfbcdffff]
[ 3.729177] pci 0000:0c:00.0: supports D1 D2
[ 3.729179] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.729185] pci 0000:0c:00.0: PME# disabled
[ 3.733470] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 3.733476] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
[ 3.733562] pci 0000:0d:00.0: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff]
[ 3.733574] pci 0000:0d:00.0: reg 18 io port: [0xd800-0xd8ff]
[ 3.733612] pci 0000:0d:00.0: reg 30 32bit mmio pref: [0xfbdc0000-0xfbddffff]
[ 3.733665] pci 0000:0d:00.0: supports D1 D2
[ 3.733667] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.733674] pci 0000:0d:00.0: PME# disabled
[ 3.740260] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 3.740266] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 3.740409] pci 0000:0f:03.0: reg 10 32bit mmio: [0xfbeff800-0xfbefffff]
[ 3.740420] pci 0000:0f:03.0: reg 14 32bit mmio: [0xfbef8000-0xfbefbfff]
[ 3.740467] pci 0000:0f:03.0: Disabling memory decoding and releasing memory resources.
[ 3.740475] pci 0000:0f:03.0: Rounding up size of resource #0 to 0x1000.
[ 3.740501] pci 0000:0f:03.0: supports D1 D2
[ 3.740503] pci 0000:0f:03.0: PME# supported from D0 D1 D2 D3hot
[ 3.740509] pci 0000:0f:03.0: PME# disabled
[ 3.740583] pci 0000:00:1e.0: transparent bridge
[ 3.740592] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 3.740653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 3.740998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 3.741157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 3.741234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 3.741300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 3.741369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 3.765412] initcall acpi_pci_root_init+0x0/0x22 returned 0 after 65104 usecs
[ 3.765416] calling acpi_pci_link_init+0x0/0x3b @ 1
[ 3.765497] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 3.765609] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 3.765714] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 3.765824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 3.765934] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 3.766045] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 3.766157] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 3.766270] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 3.766322] initcall acpi_pci_link_init+0x0/0x3b returned 0 after 0 usecs
[ 3.766325] calling pnp_init+0x0/0xc @ 1
[ 3.766335] initcall pnp_init+0x0/0xc returned 0 after 0 usecs
[ 3.766339] calling xen_setup_shutdown_event+0x0/0x1f @ 1
[ 3.766342] initcall xen_setup_shutdown_event+0x0/0x1f returned 0 after 0 usecs
[ 3.766345] calling xenbus_probe_backend_init+0x0/0x23 @ 1
[ 3.766355] initcall xenbus_probe_backend_init+0x0/0x23 returned 0 after 0 usecs
[ 3.766358] calling xenbus_probe_frontend_init+0x0/0x23 @ 1
[ 3.766367] initcall xenbus_probe_frontend_init+0x0/0x23 returned 0 after 0 usecs
[ 3.766370] calling balloon_init+0x0/0x271 @ 1
[ 3.766371] xen_balloon: Initialising balloon driver with page order 0.
[ 3.766385] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 3.789288] initcall balloon_init+0x0/0x271 returned 0 after 22786 usecs
[ 3.789295] calling misc_init+0x0/0xad @ 1
[ 3.789322] initcall misc_init+0x0/0xad returned 0 after 0 usecs
[ 3.789324] calling vga_arb_device_init+0x0/0x8b @ 1
[ 3.789381] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io,locks=none
[ 3.789394] vgaarb: loaded
[ 3.789397] initcall vga_arb_device_init+0x0/0x8b returned 0 after 0 usecs
[ 3.789400] calling serio_init+0x0/0x82 @ 1
[ 3.789489] initcall serio_init+0x0/0x82 returned 0 after 0 usecs
[ 3.789493] calling input_init+0x0/0x12d @ 1
[ 3.789514] initcall input_init+0x0/0x12d returned 0 after 0 usecs
[ 3.789517] calling rtc_init+0x0/0x69 @ 1
[ 3.789524] initcall rtc_init+0x0/0x69 returned 0 after 0 usecs
[ 3.789527] calling power_supply_class_init+0x0/0x31 @ 1
[ 3.789534] initcall power_supply_class_init+0x0/0x31 returned 0 after 0 usecs
[ 3.789537] calling hwmon_init+0x0/0x106 @ 1
[ 3.789548] initcall hwmon_init+0x0/0x106 returned 0 after 0 usecs
[ 3.789551] calling leds_init+0x0/0x39 @ 1
[ 3.789558] initcall leds_init+0x0/0x39 returned 0 after 0 usecs
[ 3.789561] calling pci_subsys_init+0x0/0x106 @ 1
[ 3.789563] PCI: Using ACPI for IRQ routing
[ 3.789761] initcall pci_subsys_init+0x0/0x106 returned 0 after 0 usecs
[ 3.789764] calling proto_init+0x0/0xc @ 1
[ 3.789769] initcall proto_init+0x0/0xc returned 0 after 0 usecs
[ 3.789771] calling net_dev_init+0x0/0x189 @ 1
[ 3.789831] initcall net_dev_init+0x0/0x189 returned 0 after 0 usecs
[ 3.789833] calling neigh_init+0x0/0x6f @ 1
[ 3.789836] initcall neigh_init+0x0/0x6f returned 0 after 0 usecs
[ 3.789839] calling fib_rules_init+0x0/0x9c @ 1
[ 3.789842] initcall fib_rules_init+0x0/0x9c returned 0 after 0 usecs
[ 3.789845] calling pktsched_init+0x0/0xcd @ 1
[ 3.789849] initcall pktsched_init+0x0/0xcd returned 0 after 0 usecs
[ 3.789852] calling tc_filter_init+0x0/0x49 @ 1
[ 3.789854] initcall tc_filter_init+0x0/0x49 returned 0 after 0 usecs
[ 3.789857] calling tc_action_init+0x0/0x49 @ 1
[ 3.789860] initcall tc_action_init+0x0/0x49 returned 0 after 0 usecs
[ 3.789862] calling genl_init+0x0/0x99 @ 1
[ 3.789873] initcall genl_init+0x0/0x99 returned 0 after 0 usecs
[ 3.789876] calling wireless_nlevent_init+0x0/0xc @ 1
[ 3.789878] initcall wireless_nlevent_init+0x0/0xc returned 0 after 0 usecs
[ 3.789881] calling sysctl_init+0x0/0x49 @ 1
[ 3.789884] initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
[ 3.789887] calling print_all_ICs+0x0/0x4f0 @ 1
[ 3.789938] initcall print_all_ICs+0x0/0x4f0 returned 0 after 0 usecs
[ 3.789941] calling hpet_late_init+0x0/0xea @ 1
[ 3.789944] initcall hpet_late_init+0x0/0xea returned -19 after 0 usecs
[ 3.789947] calling init_k8_nbs+0x0/0x1e @ 1
[ 3.789969] initcall init_k8_nbs+0x0/0x1e returned 0 after 0 usecs
[ 3.789973] calling clocksource_done_booting+0x0/0x57 @ 1
[ 3.789976] Switching to clocksource xen
[ 3.790453] initcall clocksource_done_booting+0x0/0x57 returned 0 after 162 usecs
[ 3.790457] calling rb_init_debugfs+0x0/0x2c @ 1
[ 3.790475] initcall rb_init_debugfs+0x0/0x2c returned 0 after 14 usecs
[ 3.790478] calling tracer_init_debugfs+0x0/0x2c8 @ 1
[ 3.790549] initcall tracer_init_debugfs+0x0/0x2c8 returned 0 after 66 usecs
[ 3.790552] calling init_trace_printk_function_export+0x0/0x2c @ 1
[ 3.790556] initcall init_trace_printk_function_export+0x0/0x2c returned 0 after 1 usecs
[ 3.790559] calling event_trace_init+0x0/0x1f1 @ 1
[ 3.791575] initcall event_trace_init+0x0/0x1f1 returned 0 after 988 usecs
[ 3.791578] calling init_pipe_fs+0x0/0x42 @ 1
[ 3.791595] initcall init_pipe_fs+0x0/0x42 returned 0 after 13 usecs
[ 3.791598] calling eventpoll_init+0x0/0xd9 @ 1
[ 3.791605] initcall eventpoll_init+0x0/0xd9 returned 0 after 4 usecs
[ 3.791607] calling anon_inode_init+0x0/0x11b @ 1
[ 3.791614] initcall anon_inode_init+0x0/0x11b returned 0 after 4 usecs
[ 3.791618] calling tomoyo_initerface_init+0x0/0x112 @ 1
[ 3.791620] initcall tomoyo_initerface_init+0x0/0x112 returned 0 after 0 usecs
[ 3.791623] calling blk_scsi_ioctl_init+0x0/0x284 @ 1
[ 3.791626] initcall blk_scsi_ioctl_init+0x0/0x284 returned 0 after 0 usecs
[ 3.791630] calling acpi_event_init+0x0/0x4f @ 1
[ 3.791639] initcall acpi_event_init+0x0/0x4f returned 0 after 6 usecs
[ 3.791642] calling pnpacpi_init+0x0/0x89 @ 1
[ 3.791644] pnp: PnP ACPI init
[ 3.791655] ACPI: bus type pnp registered
[ 3.792043] xen: registering gsi 8 triggering 1 polarity 0
[ 3.792045] xen_allocate_pirq: returning irq 8 for gsi 8
[ 3.792047] xen: --> irq=8
[ 3.792121] xen: registering gsi 13 triggering 1 polarity 0
[ 3.792123] xen_allocate_pirq: returning irq 13 for gsi 13
[ 3.792125] xen: --> irq=13
[ 3.793474] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 3.793477] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 3.793480] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 3.793483] pnp 00:0b: mem resource (0x100000-0x9fffffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 3.793828] pnp: PnP ACPI: found 12 devices
[ 3.793830] ACPI: ACPI bus type pnp unregistered
[ 3.793834] initcall pnpacpi_init+0x0/0x89 returned 0 after 2137 usecs
[ 3.793836] calling pnp_system_init+0x0/0xc @ 1
[ 3.793846] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 3.793849] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 3.793851] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 3.793854] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 3.793860] system 00:06: ioport range 0xa00-0xadf has been reserved
[ 3.793863] system 00:06: ioport range 0xae0-0xaef has been reserved
[ 3.793868] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 3.793871] system 00:07: ioport range 0x800-0x87f has been reserved
[ 3.793874] system 00:07: ioport range 0x500-0x57f has been reserved
[ 3.793876] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 3.793879] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 3.793882] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 3.793890] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 3.793893] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 3.793898] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 3.793904] system 00:0b: iomem range 0xfed90000-0xffffffff could not be reserved
[ 3.793913] initcall pnp_system_init+0x0/0xc returned 0 after 72 usecs
[ 3.793916] calling pcistub_init+0x0/0x1d5 @ 1
[ 3.793963] pciback 0000:00:1a.0: seizing device
[ 3.793972] pciback 0000:00:1b.0: seizing device
[ 3.793994] pciback 0000:00:1d.0: seizing device
[ 3.794016] pciback 0000:01:00.0: seizing device
[ 3.794020] pciback 0000:01:00.1: seizing device
[ 3.794087] pciback 0000:0f:03.0: seizing device
[ 3.794103] initcall pcistub_init+0x0/0x1d5 returned 0 after 180 usecs
[ 3.794106] calling chr_dev_init+0x0/0xb5 @ 1
[ 3.794231] initcall chr_dev_init+0x0/0xb5 returned 0 after 118 usecs
[ 3.794234] calling firmware_class_init+0x0/0x6f @ 1
[ 3.794242] initcall firmware_class_init+0x0/0x6f returned 0 after 5 usecs
[ 3.794244] calling cpufreq_gov_performance_init+0x0/0xc @ 1
[ 3.794248] initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 0 usecs
[ 3.794250] calling cpufreq_gov_dbs_init+0x0/0xdc @ 1
[ 3.794539] initcall cpufreq_gov_dbs_init+0x0/0xdc returned 0 after 279 usecs
[ 3.794543] calling init_acpi_pm_clocksource+0x0/0xdc @ 1
[ 3.798352] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 3.798356] initcall init_acpi_pm_clocksource+0x0/0xdc returned -19 after 3720 usecs
[ 3.798359] calling pcibios_assign_resources+0x0/0x6a @ 1
[ 3.798589] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 3.798593] pci 0000:00:03.0: IO window: 0x5000-0x7fff
[ 3.798599] pci 0000:00:03.0: MEM window: 0xfa600000-0xfa6fffff
[ 3.798604] pci 0000:00:03.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 3.798612] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 3.798613] pci 0000:03:00.0: IO window: disabled
[ 3.798620] pci 0000:03:00.0: MEM window: 0xfa700000-0xfb7fffff
[ 3.798624] pci 0000:03:00.0: PREFETCH window: disabled
[ 3.798633] pci 0000:06:02.0: PCI bridge, secondary bus 0000:07
[ 3.798637] pci 0000:06:02.0: IO window: 0x8000-0x8fff
[ 3.798645] pci 0000:06:02.0: MEM window: 0xfb800000-0xfb8fffff
[ 3.798651] pci 0000:06:02.0: PREFETCH window: disabled
[ 3.798661] pci 0000:06:03.0: PCI bridge, secondary bus 0000:08
[ 3.798665] pci 0000:06:03.0: IO window: 0x9000-0x9fff
[ 3.798674] pci 0000:06:03.0: MEM window: 0xfb900000-0xfb9fffff
[ 3.798680] pci 0000:06:03.0: PREFETCH window: disabled
[ 3.798690] pci 0000:06:04.0: PCI bridge, secondary bus 0000:09
[ 3.798694] pci 0000:06:04.0: IO window: 0xa000-0xafff
[ 3.798702] pci 0000:06:04.0: MEM window: 0xfba00000-0xfbafffff
[ 3.798708] pci 0000:06:04.0: PREFETCH window: disabled
[ 3.798719] pci 0000:06:05.0: PCI bridge, secondary bus 0000:0a
[ 3.798723] pci 0000:06:05.0: IO window: 0xb000-0xbfff
[ 3.798731] pci 0000:06:05.0: MEM window: 0xfbb00000-0xfbbfffff
[ 3.798737] pci 0000:06:05.0: PREFETCH window: disabled
[ 3.798748] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
[ 3.798752] pci 0000:05:00.0: IO window: 0x8000-0xbfff
[ 3.798760] pci 0000:05:00.0: MEM window: 0xfb800000-0xfbbfffff
[ 3.798766] pci 0000:05:00.0: PREFETCH window: disabled
[ 3.798777] pci 0000:03:02.0: PCI bridge, secondary bus 0000:05
[ 3.798780] pci 0000:03:02.0: IO window: 0x8000-0xbfff
[ 3.798786] pci 0000:03:02.0: MEM window: 0xfb800000-0xfbbfffff
[ 3.798791] pci 0000:03:02.0: PREFETCH window: disabled
[ 3.798799] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 3.798802] pci 0000:02:00.0: IO window: 0x8000-0xbfff
[ 3.798808] pci 0000:02:00.0: MEM window: 0xfa700000-0xfbbfffff
[ 3.798813] pci 0000:02:00.0: PREFETCH window: disabled
[ 3.798821] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 3.798824] pci 0000:00:05.0: IO window: 0x8000-0xbfff
[ 3.798830] pci 0000:00:05.0: MEM window: 0xfa700000-0xfbbfffff
[ 3.798834] pci 0000:00:05.0: PREFETCH window: disabled
[ 3.798842] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 3.798845] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 3.798852] pci 0000:00:1c.0: MEM window: 0xa0000000-0xa01fffff
[ 3.798857] pci 0000:00:1c.0: PREFETCH window: 0x000000a0200000-0x000000a03fffff
[ 3.798865] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c
[ 3.798869] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 3.798876] pci 0000:00:1c.4: MEM window: 0xfbc00000-0xfbcfffff
[ 3.798881] pci 0000:00:1c.4: PREFETCH window: 0x000000a0400000-0x000000a05fffff
[ 3.798889] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0d
[ 3.798893] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 3.798899] pci 0000:00:1c.5: MEM window: 0xfbd00000-0xfbdfffff
[ 3.798904] pci 0000:00:1c.5: PREFETCH window: 0x000000a0600000-0x000000a07fffff
[ 3.798913] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:0e
[ 3.798916] pci 0000:00:1c.7: IO window: 0x2000-0x2fff
[ 3.798923] pci 0000:00:1c.7: MEM window: 0xa0800000-0xa09fffff
[ 3.798928] pci 0000:00:1c.7: PREFETCH window: 0x000000a0a00000-0x000000a0bfffff
[ 3.798945] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0f
[ 3.798947] pci 0000:00:1e.0: IO window: disabled
[ 3.798953] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff
[ 3.798958] pci 0000:00:1e.0: PREFETCH window: disabled
[ 3.798974] xen: registering gsi 16 triggering 0 polarity 1
[ 3.798984] alloc irq_desc for 16 on node 0
[ 3.798986] alloc kstat_irqs on node 0
[ 3.799001] xen: --> irq=16
[ 3.799008] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.799014] pci 0000:00:03.0: setting latency timer to 64
[ 3.799025] xen: registering gsi 16 triggering 0 polarity 1
[ 3.799027] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.799029] xen: --> irq=16
[ 3.799031] Already setup the GSI :16
[ 3.799033] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.799038] pci 0000:00:05.0: setting latency timer to 64
[ 3.799053] pci 0000:02:00.0: setting latency timer to 64
[ 3.799066] pci 0000:03:00.0: setting latency timer to 64
[ 3.799079] pci 0000:03:02.0: setting latency timer to 64
[ 3.799097] pci 0000:05:00.0: setting latency timer to 64
[ 3.799114] pci 0000:06:02.0: setting latency timer to 64
[ 3.799132] pci 0000:06:03.0: setting latency timer to 64
[ 3.799149] pci 0000:06:04.0: setting latency timer to 64
[ 3.799167] pci 0000:06:05.0: setting latency timer to 64
[ 3.799179] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 3.799183] xen: registering gsi 17 triggering 0 polarity 1
[ 3.799189] alloc irq_desc for 17 on node 0
[ 3.799190] alloc kstat_irqs on node 0
[ 3.799193] xen: --> irq=17
[ 3.799198] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.799203] pci 0000:00:1c.0: setting latency timer to 64
[ 3.799215] xen: registering gsi 17 triggering 0 polarity 1
[ 3.799217] xen_allocate_pirq: returning irq 17 for gsi 17
[ 3.799219] xen: --> irq=17
[ 3.799221] Already setup the GSI :17
[ 3.799223] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.799228] pci 0000:00:1c.4: setting latency timer to 64
[ 3.799240] xen: registering gsi 16 triggering 0 polarity 1
[ 3.799242] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.799243] xen: --> irq=16
[ 3.799245] Already setup the GSI :16
[ 3.799248] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 3.799253] pci 0000:00:1c.5: setting latency timer to 64
[ 3.799264] pci 0000:00:1c.7: enabling device (0104 -> 0107)
[ 3.799268] xen: registering gsi 19 triggering 0 polarity 1
[ 3.799273] alloc irq_desc for 19 on node 0
[ 3.799275] alloc kstat_irqs on node 0
[ 3.799278] xen: --> irq=19
[ 3.799282] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.799287] pci 0000:00:1c.7: setting latency timer to 64
[ 3.799297] pci 0000:00:1e.0: setting latency timer to 64
[ 3.799302] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 3.799304] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 3.799306] pci_bus 0000:01: resource 0 io: [0x5000-0x7fff]
[ 3.799308] pci_bus 0000:01: resource 1 mem: [0xfa600000-0xfa6fffff]
[ 3.799310] pci_bus 0000:01: resource 2 pref mem [0xbff00000-0xdfefffff]
[ 3.799313] pci_bus 0000:02: resource 0 io: [0x8000-0xbfff]
[ 3.799315] pci_bus 0000:02: resource 1 mem: [0xfa700000-0xfbbfffff]
[ 3.799317] pci_bus 0000:03: resource 0 io: [0x8000-0xbfff]
[ 3.799319] pci_bus 0000:03: resource 1 mem: [0xfa700000-0xfbbfffff]
[ 3.799321] pci_bus 0000:04: resource 1 mem: [0xfa700000-0xfb7fffff]
[ 3.799324] pci_bus 0000:05: resource 0 io: [0x8000-0xbfff]
[ 3.799326] pci_bus 0000:05: resource 1 mem: [0xfb800000-0xfbbfffff]
[ 3.799328] pci_bus 0000:06: resource 0 io: [0x8000-0xbfff]
[ 3.799330] pci_bus 0000:06: resource 1 mem: [0xfb800000-0xfbbfffff]
[ 3.799332] pci_bus 0000:07: resource 0 io: [0x8000-0x8fff]
[ 3.799334] pci_bus 0000:07: resource 1 mem: [0xfb800000-0xfb8fffff]
[ 3.799336] pci_bus 0000:08: resource 0 io: [0x9000-0x9fff]
[ 3.799338] pci_bus 0000:08: resource 1 mem: [0xfb900000-0xfb9fffff]
[ 3.799341] pci_bus 0000:09: resource 0 io: [0xa000-0xafff]
[ 3.799343] pci_bus 0000:09: resource 1 mem: [0xfba00000-0xfbafffff]
[ 3.799345] pci_bus 0000:0a: resource 0 io: [0xb000-0xbfff]
[ 3.799347] pci_bus 0000:0a: resource 1 mem: [0xfbb00000-0xfbbfffff]
[ 3.799349] pci_bus 0000:0b: resource 0 io: [0x1000-0x1fff]
[ 3.799351] pci_bus 0000:0b: resource 1 mem: [0xa0000000-0xa01fffff]
[ 3.799354] pci_bus 0000:0b: resource 2 pref mem [0xa0200000-0xa03fffff]
[ 3.799356] pci_bus 0000:0c: resource 0 io: [0xc000-0xcfff]
[ 3.799358] pci_bus 0000:0c: resource 1 mem: [0xfbc00000-0xfbcfffff]
[ 3.799360] pci_bus 0000:0c: resource 2 pref mem [0xa0400000-0xa05fffff]
[ 3.799362] pci_bus 0000:0d: resource 0 io: [0xd000-0xdfff]
[ 3.799364] pci_bus 0000:0d: resource 1 mem: [0xfbd00000-0xfbdfffff]
[ 3.799366] pci_bus 0000:0d: resource 2 pref mem [0xa0600000-0xa07fffff]
[ 3.799369] pci_bus 0000:0e: resource 0 io: [0x2000-0x2fff]
[ 3.799371] pci_bus 0000:0e: resource 1 mem: [0xa0800000-0xa09fffff]
[ 3.799373] pci_bus 0000:0e: resource 2 pref mem [0xa0a00000-0xa0bfffff]
[ 3.799375] pci_bus 0000:0f: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 3.799377] pci_bus 0000:0f: resource 3 io: [0x00-0xffff]
[ 3.799379] pci_bus 0000:0f: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 3.799383] initcall pcibios_assign_resources+0x0/0x6a returned 0 after 996 usecs
[ 3.799386] calling sysctl_core_init+0x0/0x34 @ 1
[ 3.799402] initcall sysctl_core_init+0x0/0x34 returned 0 after 13 usecs
[ 3.799405] calling inet_init+0x0/0x1fd @ 1
[ 3.799414] NET: Registered protocol family 2
[ 3.800034] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 3.801709] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 3.803939] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.804201] TCP: Hash tables configured (established 524288 bind 65536)
[ 3.804203] TCP reno registered
[ 3.804298] initcall inet_init+0x0/0x1fd returned 0 after 4772 usecs
[ 3.804301] calling af_unix_init+0x0/0x4b @ 1
[ 3.804304] NET: Registered protocol family 1
[ 3.804312] initcall af_unix_init+0x0/0x4b returned 0 after 8 usecs
[ 3.804316] calling pci_apply_final_quirks+0x0/0x2b @ 1
[ 3.804357] pciback 0000:01:00.0: Boot video device
[ 3.804409] initcall pci_apply_final_quirks+0x0/0x2b returned 0 after 88 usecs
[ 3.804413] calling populate_rootfs+0x0/0x104 @ 1
[ 3.804453] Unpacking initramfs...
[ 3.824449] Freeing initrd memory: 27574k freed
[ 3.830163] initcall populate_rootfs+0x0/0x104 returned 0 after 25136 usecs
[ 3.830168] calling pci_iommu_init+0x0/0x37 @ 1
[ 3.830170] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.830173] DMA: Placing 64MB software IO TLB between ffff88000d2f8000 - ffff8800112f8000
[ 3.830175] DMA: software IO TLB at phys 0xd2f8000 - 0x112f8000
[ 3.830178] initcall pci_iommu_init+0x0/0x37 returned 0 after 7 usecs
[ 3.830182] calling calgary_fixup_tce_spaces+0x0/0xe3 @ 1
[ 3.830185] initcall calgary_fixup_tce_spaces+0x0/0xe3 returned -19 after 0 usecs
[ 3.830188] calling i8259A_init_sysfs+0x0/0x20 @ 1
[ 3.830213] initcall i8259A_init_sysfs+0x0/0x20 returned 0 after 21 usecs
[ 3.830216] calling vsyscall_init+0x0/0x69 @ 1
[ 3.830259] initcall vsyscall_init+0x0/0x69 returned 0 after 38 usecs
[ 3.830262] calling sbf_init+0x0/0xe2 @ 1
[ 3.830265] initcall sbf_init+0x0/0xe2 returned 0 after 0 usecs
[ 3.830268] calling i8237A_init_sysfs+0x0/0x22 @ 1
[ 3.830280] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 9 usecs
[ 3.830283] calling add_rtc_cmos+0x0/0xa4 @ 1
[ 3.830288] initcall add_rtc_cmos+0x0/0xa4 returned 0 after 1 usecs
[ 3.830292] calling cache_sysfs_init+0x0/0x5c @ 1
[ 3.830646] initcall cache_sysfs_init+0x0/0x5c returned 0 after 342 usecs
[ 3.830649] calling mce_init_device+0x0/0xeb @ 1
[ 3.830775] initcall mce_init_device+0x0/0xeb returned 0 after 120 usecs
[ 3.830778] calling threshold_init_device+0x0/0x49 @ 1
[ 3.830781] initcall threshold_init_device+0x0/0x49 returned 0 after 0 usecs
[ 3.830783] calling thermal_throttle_init_device+0x0/0x8b @ 1
[ 3.830786] initcall thermal_throttle_init_device+0x0/0x8b returned 0 after 0 usecs
[ 3.830789] calling ioapic_init_sysfs+0x0/0x9d @ 1
[ 3.830800] initcall ioapic_init_sysfs+0x0/0x9d returned 0 after 8 usecs
[ 3.830803] calling add_pcspkr+0x0/0x23 @ 1
[ 3.830818] initcall add_pcspkr+0x0/0x23 returned 0 after 11 usecs
[ 3.830820] calling audit_classes_init+0x0/0xac @ 1
[ 3.830827] initcall audit_classes_init+0x0/0xac returned 0 after 4 usecs
[ 3.830830] calling init_vdso_vars+0x0/0x1f8 @ 1
[ 3.830844] initcall init_vdso_vars+0x0/0x1f8 returned 0 after 10 usecs
[ 3.830846] calling ia32_binfmt_init+0x0/0x11 @ 1
[ 3.830852] initcall ia32_binfmt_init+0x0/0x11 returned 0 after 3 usecs
[ 3.830855] calling sysenter_setup+0x0/0x2b9 @ 1
[ 3.830859] initcall sysenter_setup+0x0/0x2b9 returned 0 after 1 usecs
[ 3.830861] calling init_aout_binfmt+0x0/0xe @ 1
[ 3.830864] initcall init_aout_binfmt+0x0/0xe returned 0 after 0 usecs
[ 3.830867] calling init_sched_debug_procfs+0x0/0x2b @ 1
[ 3.830873] initcall init_sched_debug_procfs+0x0/0x2b returned 0 after 4 usecs
[ 3.830876] calling proc_execdomains_init+0x0/0x1f @ 1
[ 3.830880] initcall proc_execdomains_init+0x0/0x1f returned 0 after 1 usecs
[ 3.830882] calling ioresources_init+0x0/0x39 @ 1
[ 3.830887] initcall ioresources_init+0x0/0x39 returned 0 after 2 usecs
[ 3.830889] calling uid_cache_init+0x0/0x89 @ 1
[ 3.830896] initcall uid_cache_init+0x0/0x89 returned 0 after 4 usecs
[ 3.830898] calling init_posix_timers+0x0/0x186 @ 1
[ 3.830905] initcall init_posix_timers+0x0/0x186 returned 0 after 3 usecs
[ 3.830907] calling init_posix_cpu_timers+0x0/0xed @ 1
[ 3.830910] initcall init_posix_cpu_timers+0x0/0xed returned 0 after 0 usecs
[ 3.830913] calling nsproxy_cache_init+0x0/0x2a @ 1
[ 3.830916] initcall nsproxy_cache_init+0x0/0x2a returned 0 after 0 usecs
[ 3.830919] calling create_proc_profile+0x0/0x249 @ 1
[ 3.830922] initcall create_proc_profile+0x0/0x249 returned 0 after 0 usecs
[ 3.830924] calling timekeeping_init_device+0x0/0x22 @ 1
[ 3.830936] initcall timekeeping_init_device+0x0/0x22 returned 0 after 9 usecs
[ 3.830939] calling init_clocksource_sysfs+0x0/0x4e @ 1
[ 3.830951] initcall init_clocksource_sysfs+0x0/0x4e returned 0 after 8 usecs
[ 3.830954] calling init_timer_list_procfs+0x0/0x29 @ 1
[ 3.830958] initcall init_timer_list_procfs+0x0/0x29 returned 0 after 1 usecs
[ 3.830960] calling init_tstats_procfs+0x0/0x2b @ 1
[ 3.830964] initcall init_tstats_procfs+0x0/0x2b returned 0 after 1 usecs
[ 3.830966] calling futex_init+0x0/0x65 @ 1
[ 3.830975] initcall futex_init+0x0/0x65 returned 0 after 6 usecs
[ 3.830978] calling proc_dma_init+0x0/0x1f @ 1
[ 3.830981] initcall proc_dma_init+0x0/0x1f returned 0 after 1 usecs
[ 3.830984] calling proc_modules_init+0x0/0x21 @ 1
[ 3.830988] initcall proc_modules_init+0x0/0x21 returned 0 after 1 usecs
[ 3.830990] calling kallsyms_init+0x0/0x22 @ 1
[ 3.830994] initcall kallsyms_init+0x0/0x22 returned 0 after 1 usecs
[ 3.830996] calling snapshot_device_init+0x0/0xc @ 1
[ 3.831013] initcall snapshot_device_init+0x0/0xc returned 0 after 13 usecs
[ 3.831016] calling crash_save_vmcoreinfo_init+0x0/0x46a @ 1
[ 3.831035] initcall crash_save_vmcoreinfo_init+0x0/0x46a returned 0 after 15 usecs
[ 3.831038] calling crash_notes_memory_init+0x0/0x33 @ 1
[ 3.831044] initcall crash_notes_memory_init+0x0/0x33 returned 0 after 3 usecs
[ 3.831047] calling pid_namespaces_init+0x0/0x2a @ 1
[ 3.831051] initcall pid_namespaces_init+0x0/0x2a returned 0 after 0 usecs
[ 3.831053] calling audit_init+0x0/0x13e @ 1
[ 3.831055] audit: initializing netlink socket (disabled)
[ 3.831065] type=2000 audit(1309225898.788:1): initialized
[ 3.831068] initcall audit_init+0x0/0x13e returned 0 after 12 usecs
[ 3.831071] calling audit_tree_init+0x0/0x57 @ 1
[ 3.831074] initcall audit_tree_init+0x0/0x57 returned 0 after 0 usecs
[ 3.831076] calling init_kprobes+0x0/0x155 @ 1
[ 3.833464] initcall init_kprobes+0x0/0x155 returned 0 after 2328 usecs
[ 3.833467] calling hung_task_init+0x0/0x49 @ 1
[ 3.833551] initcall hung_task_init+0x0/0x49 returned 0 after 78 usecs
[ 3.833554] calling utsname_sysctl_init+0x0/0x11 @ 1
[ 3.833567] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 9 usecs
[ 3.833570] calling init_tracepoints+0x0/0xc @ 1
[ 3.833573] initcall init_tracepoints+0x0/0xc returned 0 after 0 usecs
[ 3.833575] calling init_events+0x0/0x5c @ 1
[ 3.833579] initcall init_events+0x0/0x5c returned 0 after 0 usecs
[ 3.833581] calling init_sched_switch_trace+0x0/0xc @ 1
[ 3.833585] initcall init_sched_switch_trace+0x0/0xc returned 0 after 0 usecs
[ 3.833588] calling init_blk_tracer+0x0/0x54 @ 1
[ 3.833591] initcall init_blk_tracer+0x0/0x54 returned 0 after 0 usecs
[ 3.833593] calling perf_event_sysfs_init+0x0/0x13 @ 1
[ 3.833599] initcall perf_event_sysfs_init+0x0/0x13 returned 0 after 3 usecs
[ 3.833602] calling init_per_zone_wmark_min+0x0/0x68 @ 1
[ 3.833782] initcall init_per_zone_wmark_min+0x0/0x68 returned 0 after 171 usecs
[ 3.833785] calling kswapd_init+0x0/0x6a @ 1
[ 3.833839] initcall kswapd_init+0x0/0x6a returned 0 after 49 usecs
[ 3.833842] calling setup_vmstat+0x0/0xbd @ 1
[ 3.833865] initcall setup_vmstat+0x0/0xbd returned 0 after 19 usecs
[ 3.833870] calling mm_sysfs_init+0x0/0x26 @ 1
[ 3.833876] initcall mm_sysfs_init+0x0/0x26 returned 0 after 3 usecs
[ 3.833879] calling proc_vmalloc_init+0x0/0x22 @ 1
[ 3.833883] initcall proc_vmalloc_init+0x0/0x22 returned 0 after 1 usecs
[ 3.833886] calling procswaps_init+0x0/0x1f @ 1
[ 3.833890] initcall procswaps_init+0x0/0x1f returned 0 after 1 usecs
[ 3.833893] calling hugetlb_init+0x0/0x33c @ 1
[ 3.833896] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.833904] initcall hugetlb_init+0x0/0x33c returned 0 after 8 usecs
[ 3.833907] calling ksm_init+0x0/0x1c3 @ 1
[ 3.833962] initcall ksm_init+0x0/0x1c3 returned 0 after 50 usecs
[ 3.833965] calling slab_proc_init+0x0/0x23 @ 1
[ 3.833970] initcall slab_proc_init+0x0/0x23 returned 0 after 1 usecs
[ 3.833972] calling slab_sysfs_init+0x0/0xe9 @ 1
[ 3.834980] initcall slab_sysfs_init+0x0/0xe9 returned 0 after 980 usecs
[ 3.834983] calling fasync_init+0x0/0x27 @ 1
[ 3.834988] initcall fasync_init+0x0/0x27 returned 0 after 2 usecs
[ 3.834991] calling proc_filesystems_init+0x0/0x1f @ 1
[ 3.834995] initcall proc_filesystems_init+0x0/0x1f returned 0 after 1 usecs
[ 3.834997] calling dnotify_init+0x0/0x7d @ 1
[ 3.835005] initcall dnotify_init+0x0/0x7d returned 0 after 5 usecs
[ 3.835007] calling inotify_setup+0x0/0xd @ 1
[ 3.835009] initcall inotify_setup+0x0/0xd returned 0 after 0 usecs
[ 3.835012] calling inotify_user_setup+0x0/0xbb @ 1
[ 3.835029] initcall inotify_user_setup+0x0/0xbb returned 0 after 13 usecs
[ 3.835031] calling aio_setup+0x0/0x70 @ 1
[ 3.835357] initcall aio_setup+0x0/0x70 returned 0 after 315 usecs
[ 3.835360] calling proc_locks_init+0x0/0x21 @ 1
[ 3.835364] initcall proc_locks_init+0x0/0x21 returned 0 after 2 usecs
[ 3.835367] calling init_sys32_ioctl+0x0/0x9c @ 1
[ 3.835380] initcall init_sys32_ioctl+0x0/0x9c returned 0 after 10 usecs
[ 3.835382] calling dquot_init+0x0/0xf4 @ 1
[ 3.835384] VFS: Disk quotas dquot_6.5.2
[ 3.835429] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.835435] initcall dquot_init+0x0/0xf4 returned 0 after 49 usecs
[ 3.835438] calling proc_cmdline_init+0x0/0x1f @ 1
[ 3.835441] initcall proc_cmdline_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835444] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 3.835449] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 2 usecs
[ 3.835451] calling proc_devices_init+0x0/0x1f @ 1
[ 3.835455] initcall proc_devices_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835457] calling proc_interrupts_init+0x0/0x1f @ 1
[ 3.835461] initcall proc_interrupts_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835463] calling proc_loadavg_init+0x0/0x1f @ 1
[ 3.835467] initcall proc_loadavg_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835469] calling proc_meminfo_init+0x0/0x1f @ 1
[ 3.835473] initcall proc_meminfo_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835475] calling proc_stat_init+0x0/0x1f @ 1
[ 3.835479] initcall proc_stat_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835481] calling proc_uptime_init+0x0/0x1f @ 1
[ 3.835484] initcall proc_uptime_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835487] calling proc_version_init+0x0/0x1f @ 1
[ 3.835490] initcall proc_version_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835493] calling proc_softirqs_init+0x0/0x1f @ 1
[ 3.835497] initcall proc_softirqs_init+0x0/0x1f returned 0 after 1 usecs
[ 3.835499] calling proc_kcore_init+0x0/0xb2 @ 1
[ 3.835508] initcall proc_kcore_init+0x0/0xb2 returned 0 after 6 usecs
[ 3.835510] calling proc_kmsg_init+0x0/0x23 @ 1
[ 3.835514] initcall proc_kmsg_init+0x0/0x23 returned 0 after 1 usecs
[ 3.835516] calling proc_page_init+0x0/0x3f @ 1
[ 3.835521] initcall proc_page_init+0x0/0x3f returned 0 after 2 usecs
[ 3.835523] calling init_devpts_fs+0x0/0x42 @ 1
[ 3.835538] initcall init_devpts_fs+0x0/0x42 returned 0 after 12 usecs
[ 3.835541] calling init_ramfs_fs+0x0/0xc @ 1
[ 3.835544] initcall init_ramfs_fs+0x0/0xc returned 0 after 0 usecs
[ 3.835546] calling init_hugetlbfs_fs+0x0/0x8e @ 1
[ 3.835582] initcall init_hugetlbfs_fs+0x0/0x8e returned 0 after 32 usecs
[ 3.835585] calling ipc_init+0x0/0x2c @ 1
[ 3.835589] msgmni has been set to 1578
[ 3.835594] initcall ipc_init+0x0/0x2c returned 0 after 7 usecs
[ 3.835597] calling ipc_sysctl_init+0x0/0x11 @ 1
[ 3.835616] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 16 usecs
[ 3.835619] calling init_mqueue_fs+0x0/0xaa @ 1
[ 3.835662] initcall init_mqueue_fs+0x0/0xaa returned 0 after 39 usecs
[ 3.835665] calling key_proc_init+0x0/0x58 @ 1
[ 3.835670] initcall key_proc_init+0x0/0x58 returned 0 after 2 usecs
[ 3.835673] calling selinux_nf_ip_init+0x0/0x61 @ 1
[ 3.835676] initcall selinux_nf_ip_init+0x0/0x61 returned 0 after 0 usecs
[ 3.835678] calling init_sel_fs+0x0/0x5e @ 1
[ 3.835681] initcall init_sel_fs+0x0/0x5e returned 0 after 0 usecs
[ 3.835683] calling selnl_init+0x0/0x4a @ 1
[ 3.835688] initcall selnl_init+0x0/0x4a returned 0 after 2 usecs
[ 3.835690] calling sel_netif_init+0x0/0x70 @ 1
[ 3.835693] initcall sel_netif_init+0x0/0x70 returned 0 after 0 usecs
[ 3.835695] calling sel_netnode_init+0x0/0x71 @ 1
[ 3.835697] initcall sel_netnode_init+0x0/0x71 returned 0 after 0 usecs
[ 3.835700] calling sel_netport_init+0x0/0x71 @ 1
[ 3.835702] initcall sel_netport_init+0x0/0x71 returned 0 after 0 usecs
[ 3.835705] calling aurule_init+0x0/0x34 @ 1
[ 3.835707] initcall aurule_init+0x0/0x34 returned 0 after 0 usecs
[ 3.835710] calling crypto_wq_init+0x0/0x2b @ 1
[ 3.836032] initcall crypto_wq_init+0x0/0x2b returned 0 after 311 usecs
[ 3.836035] calling crypto_algapi_init+0x0/0xa @ 1
[ 3.836040] initcall crypto_algapi_init+0x0/0xa returned 0 after 2 usecs
[ 3.836042] calling skcipher_module_init+0x0/0x32 @ 1
[ 3.836045] initcall skcipher_module_init+0x0/0x32 returned 0 after 0 usecs
[ 3.836048] calling chainiv_module_init+0x0/0xc @ 1
[ 3.836051] initcall chainiv_module_init+0x0/0xc returned 0 after 0 usecs
[ 3.836053] calling eseqiv_module_init+0x0/0xc @ 1
[ 3.836056] initcall eseqiv_module_init+0x0/0xc returned 0 after 0 usecs
[ 3.836058] calling md5_mod_init+0x0/0xc @ 1
[ 3.836133] initcall md5_mod_init+0x0/0xc returned 0 after 69 usecs
[ 3.836135] calling krng_mod_init+0x0/0xc @ 1
[ 3.836184] alg: No test for stdrng (krng)
[ 3.836194] initcall krng_mod_init+0x0/0xc returned 0 after 54 usecs
[ 3.836197] calling proc_genhd_init+0x0/0x39 @ 1
[ 3.836203] initcall proc_genhd_init+0x0/0x39 returned 0 after 2 usecs
[ 3.836205] calling bsg_init+0x0/0x12b @ 1
[ 3.836240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.836243] initcall bsg_init+0x0/0x12b returned 0 after 34 usecs
[ 3.836245] calling noop_init+0x0/0x11 @ 1
[ 3.836247] io scheduler noop registered
[ 3.836250] initcall noop_init+0x0/0x11 returned 0 after 1 usecs
[ 3.836252] calling as_init+0x0/0x11 @ 1
[ 3.836254] io scheduler anticipatory registered
[ 3.836256] initcall as_init+0x0/0x11 returned 0 after 1 usecs
[ 3.836259] calling deadline_init+0x0/0x11 @ 1
[ 3.836261] io scheduler deadline registered
[ 3.836263] initcall deadline_init+0x0/0x11 returned 0 after 1 usecs
[ 3.836266] calling cfq_init+0x0/0x91 @ 1
[ 3.836293] io scheduler cfq registered (default)
[ 3.836296] initcall cfq_init+0x0/0x91 returned 0 after 27 usecs
[ 3.836299] calling percpu_counter_startup+0x0/0x16 @ 1
[ 3.836302] initcall percpu_counter_startup+0x0/0x16 returned 0 after 0 usecs
[ 3.836305] calling pci_proc_init+0x0/0x60 @ 1
[ 3.836395] initcall pci_proc_init+0x0/0x60 returned 0 after 85 usecs
[ 3.836397] calling pcie_portdrv_init+0x0/0x42 @ 1
[ 3.836508] alloc irq_desc for 2261 on node -1
[ 3.836510] alloc kstat_irqs on node -1
[ 3.836544] pcieport 0000:00:03.0: setting latency timer to 64
[ 3.836716] alloc irq_desc for 2260 on node -1
[ 3.836718] alloc kstat_irqs on node -1
[ 3.836742] pcieport 0000:00:05.0: setting latency timer to 64
[ 3.836905] alloc irq_desc for 2259 on node -1
[ 3.836907] alloc kstat_irqs on node -1
[ 3.836935] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.837101] alloc irq_desc for 2258 on node -1
[ 3.837103] alloc kstat_irqs on node -1
[ 3.837131] pcieport 0000:00:1c.4: setting latency timer to 64
[ 3.837294] alloc irq_desc for 2257 on node -1
[ 3.837296] alloc kstat_irqs on node -1
[ 3.837324] pcieport 0000:00:1c.5: setting latency timer to 64
[ 3.837487] alloc irq_desc for 2256 on node -1
[ 3.837489] alloc kstat_irqs on node -1
[ 3.837517] pcieport 0000:00:1c.7: setting latency timer to 64
[ 3.837844] pcieport 0000:05:00.0: setting latency timer to 64
[ 3.838027] alloc irq_desc for 2255 on node -1
[ 3.838029] alloc kstat_irqs on node -1
[ 3.838075] pcieport 0000:06:02.0: setting latency timer to 64
[ 3.838269] alloc irq_desc for 2254 on node -1
[ 3.838271] alloc kstat_irqs on node -1
[ 3.838316] pcieport 0000:06:03.0: setting latency timer to 64
[ 3.838510] alloc irq_desc for 2253 on node -1
[ 3.838512] alloc kstat_irqs on node -1
[ 3.838601] pcieport 0000:06:04.0: setting latency timer to 64
[ 3.838800] alloc irq_desc for 2252 on node -1
[ 3.838802] alloc kstat_irqs on node -1
[ 3.838848] pcieport 0000:06:05.0: setting latency timer to 64
[ 3.838946] initcall pcie_portdrv_init+0x0/0x42 returned 0 after 2485 usecs
[ 3.838949] calling aer_service_init+0x0/0x27 @ 1
[ 3.839326] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 3.839446] aer 0000:00:05.0:pcie02: service driver aer loaded
[ 3.839459] initcall aer_service_init+0x0/0x27 returned 0 after 495 usecs
[ 3.839463] calling pcifront_init+0x0/0x4d @ 1
[ 3.839476] initcall pcifront_init+0x0/0x4d returned 0 after 10 usecs
[ 3.839479] calling fb_console_init+0x0/0x114 @ 1
[ 3.839495] initcall fb_console_init+0x0/0x114 returned 0 after 12 usecs
[ 3.839498] calling xenfb_init+0x0/0x5b @ 1
[ 3.839500] initcall xenfb_init+0x0/0x5b returned -19 after 0 usecs
[ 3.839503] calling vesafb_init+0x0/0x239 @ 1
[ 3.839527] initcall vesafb_init+0x0/0x239 returned 0 after 20 usecs
[ 3.839530] calling efifb_init+0x0/0x1e7 @ 1
[ 3.839538] initcall efifb_init+0x0/0x1e7 returned -19 after 5 usecs
[ 3.839541] calling acpi_reserve_resources+0x0/0xea @ 1
[ 3.839547] initcall acpi_reserve_resources+0x0/0xea returned 0 after 2 usecs
[ 3.839550] calling irqrouter_init_sysfs+0x0/0x34 @ 1
[ 3.839562] initcall irqrouter_init_sysfs+0x0/0x34 returned 0 after 8 usecs
[ 3.839565] calling xenbus_probe_initcall+0x0/0x38 @ 1
[ 3.839567] initcall xenbus_probe_initcall+0x0/0x38 returned 0 after 0 usecs
[ 3.839570] calling gntdev_init+0x0/0x33 @ 1
[ 3.839593] initcall gntdev_init+0x0/0x33 returned 0 after 20 usecs
[ 3.839596] calling pciback_init+0x0/0x14d @ 1
[ 3.839634] pciback 0000:0f:03.0: enabling device (0014 -> 0016)
[ 3.839639] xen: registering gsi 19 triggering 0 polarity 1
[ 3.839642] xen_allocate_pirq: returning irq 19 for gsi 19
[ 3.839643] xen: --> irq=19
[ 3.839647] Already setup the GSI :19
[ 3.839649] pciback 0000:0f:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.839656] pciback 0000:0f:03.0: PCI INT A disabled
[ 3.839696] pciback 0000:01:00.1: enabling device (0005 -> 0007)
[ 3.839700] xen: registering gsi 17 triggering 0 polarity 1
[ 3.839702] xen_allocate_pirq: returning irq 17 for gsi 17
[ 3.839704] xen: --> irq=17
[ 3.839706] Already setup the GSI :17
[ 3.839708] pciback 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.839714] pciback 0000:01:00.1: PCI INT B disabled
[ 3.839752] pciback 0000:01:00.0: enabling device (0005 -> 0007)
[ 3.839756] xen: registering gsi 16 triggering 0 polarity 1
[ 3.839758] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.839759] xen: --> irq=16
[ 3.839761] Already setup the GSI :16
[ 3.839764] pciback 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.839769] pciback 0000:01:00.0: PCI INT A disabled
[ 3.839812] pciback 0000:00:1d.0: enabling device (0004 -> 0006)
[ 3.839816] xen: registering gsi 23 triggering 0 polarity 1
[ 3.839826] alloc irq_desc for 23 on node 0
[ 3.839828] alloc kstat_irqs on node 0
[ 3.839831] xen: --> irq=23
[ 3.839837] pciback 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.839843] pciback 0000:00:1d.0: PCI INT A disabled
[ 3.839880] pciback 0000:00:1b.0: enabling device (0004 -> 0006)
[ 3.839884] xen: registering gsi 22 triggering 0 polarity 1
[ 3.839889] alloc irq_desc for 22 on node 0
[ 3.839891] alloc kstat_irqs on node 0
[ 3.839894] xen: --> irq=22
[ 3.839897] pciback 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.839903] pciback 0000:00:1b.0: PCI INT A disabled
[ 3.839944] pciback 0000:00:1a.0: enabling device (0004 -> 0006)
[ 3.839948] xen: registering gsi 16 triggering 0 polarity 1
[ 3.839950] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.839952] xen: --> irq=16
[ 3.839954] Already setup the GSI :16
[ 3.839956] pciback 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.839962] pciback 0000:00:1a.0: PCI INT A disabled
[ 3.840280] initcall pciback_init+0x0/0x14d returned 0 after 665 usecs
[ 3.840283] calling blkif_init+0x0/0x169 @ 1
[ 3.841605] initcall blkif_init+0x0/0x169 returned 0 after 1288 usecs
[ 3.841608] calling blktap_init+0x0/0xf7 @ 1
[ 3.841611] blktap_device_init: blktap device major 254
[ 3.841614] blktap_ring_init: blktap ring major: 252
[ 3.841866] initcall blktap_init+0x0/0xf7 returned 0 after 249 usecs
[ 3.841869] calling netback_init+0x0/0x386 @ 1
[ 3.845731] registering netback
[ 3.845791] initcall netback_init+0x0/0x386 returned 0 after 3825 usecs
[ 3.845794] calling hypervisor_subsys_init+0x0/0x20 @ 1
[ 3.845797] initcall hypervisor_subsys_init+0x0/0x20 returned 0 after 0 usecs
[ 3.845799] calling hyper_sysfs_init+0x0/0x102 @ 1
[ 3.845810] initcall hyper_sysfs_init+0x0/0x102 returned 0 after 7 usecs
[ 3.845812] calling mcelog_init+0x0/0x1e @ 1
[ 3.845823] alloc irq_desc for 2251 on node -1
[ 3.845825] alloc kstat_irqs on node -1
[ 3.845842] initcall mcelog_init+0x0/0x1e returned 0 after 27 usecs
[ 3.845845] calling platform_pci_module_init+0x0/0x24 @ 1
[ 3.845848] initcall platform_pci_module_init+0x0/0x24 returned -19 after 0 usecs
[ 3.845851] calling rand_initialize+0x0/0x2b @ 1
[ 3.845864] initcall rand_initialize+0x0/0x2b returned 0 after 10 usecs
[ 3.845867] calling tty_init+0x0/0xf2 @ 1
[ 3.846794] initcall tty_init+0x0/0xf2 returned 0 after 902 usecs
[ 3.846796] calling pty_init+0x0/0x267 @ 1
[ 3.846832] initcall pty_init+0x0/0x267 returned 0 after 32 usecs
[ 3.846835] calling sysrq_init+0x0/0x22 @ 1
[ 3.846841] initcall sysrq_init+0x0/0x22 returned 0 after 4 usecs
[ 3.846844] calling xen_hvc_init+0x0/0xb1 @ 1
[ 3.846847] alloc irq_desc for 2250 on node -1
[ 3.846848] alloc kstat_irqs on node -1
[ 3.847053] initcall xen_hvc_init+0x0/0xb1 returned 0 after 200 usecs
[ 3.847057] calling hpet_init+0x0/0x60 @ 1
[ 3.847186] hpet_acpi_add: no address or irqs in _CRS
[ 3.847207] initcall hpet_init+0x0/0x60 returned 0 after 143 usecs
[ 3.847210] calling agp_init+0x0/0x25 @ 1
[ 3.847213] Linux agpgart interface v0.103
[ 3.847216] initcall agp_init+0x0/0x25 returned 0 after 1 usecs
[ 3.847218] calling agp_intel_init+0x0/0x24 @ 1
[ 3.847239] initcall agp_intel_init+0x0/0x24 returned 0 after 17 usecs
[ 3.847242] calling agp_sis_init+0x0/0x24 @ 1
[ 3.847254] initcall agp_sis_init+0x0/0x24 returned 0 after 9 usecs
[ 3.847257] calling agp_via_init+0x0/0x24 @ 1
[ 3.847270] initcall agp_via_init+0x0/0x24 returned 0 after 10 usecs
[ 3.847273] calling serial8250_init+0x0/0x14e @ 1
[ 3.847275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.847404] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.847512] initcall serial8250_init+0x0/0x14e returned 0 after 229 usecs
[ 3.847515] calling serial8250_pnp_init+0x0/0xc @ 1
[ 3.847593] initcall serial8250_pnp_init+0x0/0xc returned 0 after 73 usecs
[ 3.847596] calling serial8250_pci_init+0x0/0x15 @ 1
[ 3.847643] initcall serial8250_pci_init+0x0/0x15 returned 0 after 43 usecs
[ 3.847647] calling topology_sysfs_init+0x0/0x5a @ 1
[ 3.847678] initcall topology_sysfs_init+0x0/0x5a returned 0 after 28 usecs
[ 3.847681] calling mac_hid_init+0x0/0x84 @ 1
[ 3.847713] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 3.847727] initcall mac_hid_init+0x0/0x84 returned 0 after 41 usecs
[ 3.847730] calling net_olddevs_init+0x0/0x93 @ 1
[ 3.847735] initcall net_olddevs_init+0x0/0x93 returned 0 after 2 usecs
[ 3.847738] calling i8042_init+0x0/0x3d8 @ 1
[ 3.847774] PNP: No PS/2 controller found. Probing ports directly.
[ 3.848171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.848179] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.848194] initcall i8042_init+0x0/0x3d8 returned 0 after 442 usecs
[ 3.848198] calling mousedev_init+0x0/0x83 @ 1
[ 3.848271] mice: PS/2 mouse device common for all mice
[ 3.848274] initcall mousedev_init+0x0/0x83 returned 0 after 70 usecs
[ 3.848277] calling atkbd_init+0x0/0x25 @ 1
[ 3.848293] initcall atkbd_init+0x0/0x25 returned 0 after 13 usecs
[ 3.848297] calling xenkbd_init+0x0/0x5c @ 1
[ 3.848301] initcall xenkbd_init+0x0/0x5c returned -19 after 0 usecs
[ 3.848305] calling cmos_init+0x0/0x6b @ 1
[ 3.848332] rtc_cmos 00:03: RTC can wake from S4
[ 3.848370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.848403] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 3.848414] initcall cmos_init+0x0/0x6b returned 0 after 103 usecs
[ 3.848417] calling init_ladder+0x0/0xc @ 1
[ 3.848420] cpuidle: using governor ladder
[ 3.848423] initcall init_ladder+0x0/0xc returned 0 after 2 usecs
[ 3.848425] calling init_menu+0x0/0xc @ 1
[ 3.848428] cpuidle: using governor menu
[ 3.848430] initcall init_menu+0x0/0xc returned 0 after 1 usecs
[ 3.848433] calling ledtrig_ide_init+0x0/0x18 @ 1
[ 3.848436] initcall ledtrig_ide_init+0x0/0x18 returned 0 after 0 usecs
[ 3.848439] calling staging_init+0x0/0x3 @ 1
[ 3.848442] initcall staging_init+0x0/0x3 returned 0 after 0 usecs
[ 3.848445] calling flow_cache_init+0x0/0x189 @ 1
[ 3.848473] initcall flow_cache_init+0x0/0x189 returned 0 after 24 usecs
[ 3.848476] calling llc_init+0x0/0x1d @ 1
[ 3.848480] initcall llc_init+0x0/0x1d returned 0 after 0 usecs
[ 3.848483] calling snap_init+0x0/0x36 @ 1
[ 3.848486] initcall snap_init+0x0/0x36 returned 0 after 0 usecs
[ 3.848489] calling rif_init+0x0/0x81 @ 1
[ 3.848501] initcall rif_init+0x0/0x81 returned 0 after 9 usecs
[ 3.848504] calling blackhole_module_init+0x0/0xc @ 1
[ 3.848508] initcall blackhole_module_init+0x0/0xc returned 0 after 0 usecs
[ 3.848511] calling init_cgroup_cls+0x0/0xc @ 1
[ 3.848514] initcall init_cgroup_cls+0x0/0xc returned 0 after 0 usecs
[ 3.848517] calling sysctl_ipv4_init+0x0/0x44 @ 1
[ 3.848694] initcall sysctl_ipv4_init+0x0/0x44 returned 0 after 170 usecs
[ 3.848696] calling init_syncookies+0x0/0x16 @ 1
[ 3.848717] initcall init_syncookies+0x0/0x16 returned 0 after 18 usecs
[ 3.848721] calling ipv4_netfilter_init+0x0/0xc @ 1
[ 3.848724] initcall ipv4_netfilter_init+0x0/0xc returned 0 after 0 usecs
[ 3.848727] calling cubictcp_register+0x0/0x53 @ 1
[ 3.848729] TCP cubic registered
[ 3.848731] initcall cubictcp_register+0x0/0x53 returned 0 after 2 usecs
[ 3.848734] calling inet6_init+0x0/0x2af @ 1
[ 3.848845] NET: Registered protocol family 10
[ 3.849462] initcall inet6_init+0x0/0x2af returned 0 after 707 usecs
[ 3.849465] calling mip6_init+0x0/0xb9 @ 1
[ 3.849467] Mobile IPv6
[ 3.849470] initcall mip6_init+0x0/0xb9 returned 0 after 1 usecs
[ 3.849472] calling packet_init+0x0/0x3d @ 1
[ 3.849474] NET: Registered protocol family 17
[ 3.849479] initcall packet_init+0x0/0x3d returned 0 after 4 usecs
[ 3.849481] calling dcbnl_init+0x0/0x2f @ 1
[ 3.849483] initcall dcbnl_init+0x0/0x2f returned 0 after 0 usecs
[ 3.849486] calling mce_debugfs_init+0x0/0x38 @ 1
[ 3.849495] initcall mce_debugfs_init+0x0/0x38 returned 0 after 5 usecs
[ 3.849497] calling severities_debugfs_init+0x0/0x38 @ 1
[ 3.849501] initcall severities_debugfs_init+0x0/0x38 returned 0 after 1 usecs
[ 3.849504] calling hpet_insert_resource+0x0/0x1e @ 1
[ 3.849507] initcall hpet_insert_resource+0x0/0x1e returned 0 after 0 usecs
[ 3.849511] calling update_mp_table+0x0/0x517 @ 1
[ 3.849514] initcall update_mp_table+0x0/0x517 returned 0 after 0 usecs
[ 3.849516] calling lapic_insert_resource+0x0/0x3c @ 1
[ 3.849519] initcall lapic_insert_resource+0x0/0x3c returned -1 after 0 usecs
[ 3.849522] initcall lapic_insert_resource+0x0/0x3c returned with error code -1
[ 3.849525] calling init_lapic_nmi_sysfs+0x0/0x35 @ 1
[ 3.849528] initcall init_lapic_nmi_sysfs+0x0/0x35 returned 0 after 0 usecs
[ 3.849530] calling io_apic_bug_finalize+0x0/0x16 @ 1
[ 3.849533] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs
[ 3.849536] calling check_early_ioremap_leak+0x0/0x4d @ 1
[ 3.849539] initcall check_early_ioremap_leak+0x0/0x4d returned 0 after 0 usecs
[ 3.849542] calling pat_memtype_list_init+0x0/0x26 @ 1
[ 3.849546] initcall pat_memtype_list_init+0x0/0x26 returned 0 after 1 usecs
[ 3.849549] calling sched_init_debug+0x0/0x23 @ 1
[ 3.849552] initcall sched_init_debug+0x0/0x23 returned 0 after 1 usecs
[ 3.849556] calling init_oops_id+0x0/0x2e @ 1
[ 3.849561] initcall init_oops_id+0x0/0x2e returned 0 after 2 usecs
[ 3.849563] calling disable_boot_consoles+0x0/0x3a @ 1
[ 3.849566] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 usecs
[ 3.849569] calling pm_qos_power_init+0x0/0xc0 @ 1
[ 3.849618] initcall pm_qos_power_init+0x0/0xc0 returned 0 after 45 usecs
[ 3.849622] calling software_resume+0x0/0x1e0 @ 1
[ 3.849624] PM: Resume from disk failed.
[ 3.849627] initcall software_resume+0x0/0x1e0 returned -2 after 1 usecs
[ 3.849629] initcall software_resume+0x0/0x1e0 returned with error code -2
[ 3.849632] calling debugfs_kprobe_init+0x0/0x92 @ 1
[ 3.849638] initcall debugfs_kprobe_init+0x0/0x92 returned 0 after 3 usecs
[ 3.849642] calling taskstats_init+0x0/0x8d @ 1
[ 3.849647] registered taskstats version 1
[ 3.849649] initcall taskstats_init+0x0/0x8d returned 0 after 4 usecs
[ 3.849652] calling clear_boot_tracer+0x0/0x2a @ 1
[ 3.849655] initcall clear_boot_tracer+0x0/0x2a returned 0 after 0 usecs
[ 3.849658] calling max_swapfiles_check+0x0/0x3 @ 1
[ 3.849661] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
[ 3.849664] calling random32_reseed+0x0/0xa2 @ 1
[ 3.849691] initcall random32_reseed+0x0/0xa2 returned 0 after 23 usecs
[ 3.849694] calling pci_resource_alignment_sysfs_init+0x0/0x13 @ 1
[ 3.849700] initcall pci_resource_alignment_sysfs_init+0x0/0x13 returned 0 after 3 usecs
[ 3.849703] calling pci_sysfs_init+0x0/0x4e @ 1
[ 3.850740] initcall pci_sysfs_init+0x0/0x4e returned 0 after 1009 usecs
[ 3.850743] calling boot_wait_for_devices+0x0/0x2d @ 1
[ 3.850746] initcall boot_wait_for_devices+0x0/0x2d returned 0 after 0 usecs
[ 3.850748] calling regulator_init_complete+0x0/0x125 @ 1
[ 3.850751] initcall regulator_init_complete+0x0/0x125 returned 0 after 0 usecs
[ 3.850753] calling seqgen_init+0x0/0xc @ 1
[ 3.850764] initcall seqgen_init+0x0/0xc returned 0 after 7 usecs
[ 3.850766] calling rtc_hctosys+0x0/0x16d @ 1
[ 3.850816] rtc_cmos 00:03: setting system clock to 2011-06-28 01:51:38 UTC (1309225898)
[ 3.850819] initcall rtc_hctosys+0x0/0x16d returned 0 after 49 usecs
[ 3.850822] calling memmap_init+0x0/0x9e @ 1
[ 3.850850] initcall memmap_init+0x0/0x9e returned 0 after 25 usecs
[ 3.850853] calling pci_mmcfg_late_insert_resources+0x0/0x147 @ 1
[ 3.850858] initcall pci_mmcfg_late_insert_resources+0x0/0x147 returned 0 after 1 usecs
[ 3.850861] calling init_net_drop_monitor+0x0/0x150 @ 1
[ 3.850863] Initalizing network drop monitor service
[ 3.850877] initcall init_net_drop_monitor+0x0/0x150 returned 0 after 12 usecs
[ 3.850880] calling tcp_congestion_default+0x0/0xc @ 1
[ 3.850883] initcall tcp_congestion_default+0x0/0xc returned 0 after 0 usecs
[ 3.850886] calling initialize_hashrnd+0x0/0x16 @ 1
[ 3.850891] initcall initialize_hashrnd+0x0/0x16 returned 0 after 2 usecs
[ 3.850900] async_waiting @ 1
[ 3.850902] async_continuing @ 1 after 0 usec
[ 3.850957] Freeing unused kernel memory: 564k freed
[ 3.851041] Write protecting the kernel read-only data: 4312k
[ 3.878496] <30>udevd[128]: starting version 171
[ 3.898967] calling thermal_init+0x0/0x40 [thermal_sys] @ 161
[ 3.898988] initcall thermal_init+0x0/0x40 [thermal_sys] returned 0 after 11 usecs
[ 3.900203] calling acpi_thermal_init+0x0/0x78 [thermal] @ 161
[ 3.900263] initcall acpi_thermal_init+0x0/0x78 [thermal] returned 0 after 51 usecs
[ 3.932953] calling sky2_init_module+0x0/0x2a [sky2] @ 242
[ 3.932957] sky2 driver version 1.25
[ 3.933023] xen: registering gsi 16 triggering 0 polarity 1
[ 3.933027] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.933031] xen: --> irq=16
[ 3.933039] Already setup the GSI :16
[ 3.933043] sky2 0000:0c:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.933062] sky2 0000:0c:00.0: setting latency timer to 64
[ 3.933127] sky2 0000:0c:00.0: Yukon-2 (chip 0xba) chip revision 0
[ 3.933249] alloc irq_desc for 2249 on node -1
[ 3.933252] alloc kstat_irqs on node -1
[ 3.934054] sky2 eth0: addr 00:1f:bc:01:dd:2b
[ 3.934085] xen: registering gsi 17 triggering 0 polarity 1
[ 3.934088] xen_allocate_pirq: returning irq 17 for gsi 17
[ 3.934090] xen: --> irq=17
[ 3.934095] Already setup the GSI :17
[ 3.934099] sky2 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.934114] sky2 0000:0d:00.0: setting latency timer to 64
[ 3.934157] sky2 0000:0d:00.0: Yukon-2 (chip 0xba) chip revision 0
[ 3.934266] alloc irq_desc for 2248 on node -1
[ 3.934271] alloc kstat_irqs on node -1
[ 3.935260] sky2 eth1: addr 00:1f:bc:01:dd:2a
[ 3.935298] initcall sky2_init_module+0x0/0x2a [sky2] returned 0 after 2281 usecs
[ 3.946339] calling init_scsi+0x0/0x87 [scsi_mod] @ 241
[ 3.946735] SCSI subsystem initialized
[ 3.946744] initcall init_scsi+0x0/0x87 [scsi_mod] returned 0 after 385 usecs
[ 3.955292] calling ata_init+0x0/0x33c [libata] @ 241
[ 3.961540] libata version 3.00 loaded.
[ 3.961550] initcall ata_init+0x0/0x33c [libata] returned 0 after 6102 usecs
[ 3.963584] calling ahci_init+0x0/0x1a [ahci] @ 241
[ 3.963607] ahci 0000:00:1f.2: version 3.0
[ 3.963624] xen: registering gsi 19 triggering 0 polarity 1
[ 3.963626] xen_allocate_pirq: returning irq 19 for gsi 19
[ 3.963628] xen: --> irq=19
[ 3.963633] Already setup the GSI :19
[ 3.963635] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.963691] alloc irq_desc for 2247 on node -1
[ 3.963693] alloc kstat_irqs on node -1
[ 3.963741] ahci: SSS flag set, parallel bus scan disabled
[ 3.978115] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 3.978123] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.978138] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.007149] scsi0 : ahci
[ 4.007253] scsi1 : ahci
[ 4.007331] scsi2 : ahci
[ 4.007409] scsi3 : ahci
[ 4.007492] scsi4 : ahci
[ 4.007570] scsi5 : ahci
[ 4.007805] ata1: SATA max UDMA/133 abar m2048@0xfbff4000 port 0xfbff4100 irq 2247
[ 4.007808] ata2: SATA max UDMA/133 abar m2048@0xfbff4000 port 0xfbff4180 irq 2247
[ 4.007811] ata3: SATA max UDMA/133 abar m2048@0xfbff4000 port 0xfbff4200 irq 2247
[ 4.007814] ata4: SATA max UDMA/133 abar m2048@0xfbff4000 port 0xfbff4280 irq 2247
[ 4.007816] ata5: SATA max UDMA/133 abar m2048@0xfbff4000 port 0xfbff4300 irq 2247
[ 4.007819] ata6: SATA max UDMA/133 abar m2048@0xfbff4000 port 0xfbff4380 irq 2247
[ 4.007856] initcall ahci_init+0x0/0x1a [ahci] returned 0 after 43228 usecs
[ 4.048566] calling sas_transport_init+0x0/0xd5 [scsi_transport_sas] @ 254
[ 4.048603] initcall sas_transport_init+0x0/0xd5 [scsi_transport_sas] returned 0 after 31 usecs
[ 4.051564] calling sas_class_init+0x0/0x30 [libsas] @ 255
[ 4.051607] initcall sas_class_init+0x0/0x30 [libsas] returned 0 after 35 usecs
[ 4.053311] calling mvs_init+0x0/0x4e [mvsas] @ 253
[ 4.053325] mvsas 0000:07:00.0: mvsas: driver version 0.8.2
[ 4.053343] xen: registering gsi 16 triggering 0 polarity 1
[ 4.053346] xen_allocate_pirq: returning irq 16 for gsi 16
[ 4.053348] xen: --> irq=16
[ 4.053351] Already setup the GSI :16
[ 4.053354] mvsas 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.053361] mvsas 0000:07:00.0: setting latency timer to 64
[ 4.056499] mvsas 0000:07:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 4.327051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.328305] ata1.00: ATA-8: ST31500541AS, CC35, max UDMA/133
[ 4.328312] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.329729] ata1.00: configured for UDMA/133
[ 4.340477] scsi 0:0:0:0: Direct-Access ATA ST31500541AS CC35 PQ: 0 ANSI: 5
[ 5.060381] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.063401] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 5.067202] ata2.00: configured for UDMA/100
[ 5.087115] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 5.807051] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.807922] ata3.00: ATA-7: ST3300831AS, 3.06, max UDMA/133
[ 5.807929] ata3.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.808892] ata3.00: configured for UDMA/133
[ 5.820479] scsi 2:0:0:0: Direct-Access ATA ST3300831AS 3.06 PQ: 0 ANSI: 5
[ 6.540383] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.543451] ata4.00: ATA-8: WDC WD5000BEVT-00A0RT0, 01.01A01, max UDMA/133
[ 6.543458] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 6.545677] ata4.00: configured for UDMA/133
[ 6.557144] scsi 3:0:0:0: Direct-Access ATA WDC WD5000BEVT-0 01.0 PQ: 0 ANSI: 5
[ 6.567047] scsi6 : mvsas
[ 6.567416] mvsas 0000:08:00.0: mvsas: driver version 0.8.2
[ 6.567438] xen: registering gsi 17 triggering 0 polarity 1
[ 6.567440] xen_allocate_pirq: returning irq 17 for gsi 17
[ 6.567442] xen: --> irq=17
[ 6.567445] Already setup the GSI :17
[ 6.567448] mvsas 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.567455] mvsas 0000:08:00.0: setting latency timer to 64
[ 6.570581] mvsas 0000:08:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 7.277047] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.483066] ata5.00: ATA-8: ST9320320AS, SD03, max UDMA/133
[ 7.483072] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 7.485208] ata5.00: configured for UDMA/133
[ 7.497068] scsi: waiting for bus probes to complete ...
[ 7.574008] scsi 4:0:0:0: Direct-Access ATA ST9320320AS SD03 PQ: 0 ANSI: 5
[ 8.293711] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.341849] ata6.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[ 8.341856] ata6.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.400178] ata6.00: configured for UDMA/133
[ 8.410476] scsi 5:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
[ 8.415532] calling cdrom_init+0x0/0x13 [cdrom] @ 292
[ 8.415569] initcall cdrom_init+0x0/0x13 [cdrom] returned 0 after 30 usecs
[ 8.419129] calling init_sd+0x0/0x125 [sd_mod] @ 291
[ 8.419256] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 8.419319] sd 2:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 8.419414] sd 0:0:0:0: [sda] Write Protect is off
[ 8.419417] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.419430] sd 2:0:0:0: [sdb] Write Protect is off
[ 8.419434] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.419454] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.419491] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.419696] sdb:initcall init_sd+0x0/0x125 [sd_mod] returned 0 after 753 usecs
[ 8.419953] sda:
[ 8.420059] sd 4:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 8.420062] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 8.420086] sd 5:0:0:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 8.420124] sd 3:0:0:0: [sdc] Write Protect is off
[ 8.420127] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 8.420157] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.420160] sd 4:0:0:0: [sdd] Write Protect is off
[ 8.420164] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 8.420178] sd 5:0:0:0: [sde] Write Protect is off
[ 8.420182] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 8.420213] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.420231] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.420331] sdc:
[ 8.420500] sdd:
[ 8.420524] sde:calling init_sr+0x0/0x47 [sr_mod] @ 292
[ 8.423982] sda1 sda2
[ 8.424289] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.433630] sdb1 sdb2
[ 8.434002] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 8.442327] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.442331] Uniform CD-ROM driver Revision: 3.20
[ 8.442411] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.442429] initcall init_sr+0x0/0x47 [sr_mod] returned 0 after 20941 usecs
[ 8.448197] sde1
[ 8.448424] sd 5:0:0:0: [sde] Attached SCSI disk
[ 8.552428] sdd1 sdd2
[ 8.552800] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 8.784850] sdc1 sdc2
[ 8.785116] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 8.789438] calling init_sg+0x0/0x12a [sg] @ 322
[ 8.789492] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.789526] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.789550] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8.789573] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 8.789596] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 8.789619] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 8.789633] initcall init_sg+0x0/0x12a [sg] returned 0 after 185 usecs
[ 9.373767] scsi7 : mvsas
[ 9.374186] mvsas 0000:09:00.0: mvsas: driver version 0.8.2
[ 9.374212] xen: registering gsi 18 triggering 0 polarity 1
[ 9.374224] sas: phy-7:1 added to port-7:0, phy_mask:0x2 ( 100000000000000)
[ 9.374227] alloc irq_desc for 18 on node 0
[ 9.374230] alloc kstat_irqs on node 0
[ 9.374235] xen: --> irq=18
[ 9.374246] mvsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.374254] sas: phy-7:2 added to port-7:1, phy_mask:0x4 ( 200000000000000)
[ 9.374256] mvsas 0000:09:00.0: setting latency timer to 64
[ 9.374277] sas: phy-7:3 added to port-7:2, phy_mask:0x8 ( 300000000000000)
[ 9.374285] sas: DOING DISCOVERY on port 0, pid:337
[ 9.377440] mvsas 0000:09:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 9.377610] sas: sas_ata_phy_reset: Found ATA device.
[ 9.381846] ata7.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 9.381853] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.385873] ata7.00: configured for UDMA/133
[ 9.385948] scsi 7:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 9.385968] sas: DONE DISCOVERY on port 0, pid:337, result:0
[ 9.385975] sas: DOING DISCOVERY on port 1, pid:337
[ 9.389376] sas: sas_ata_phy_reset: Found ATA device.
[ 9.393997] ata8.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 9.394001] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.397471] ata8.00: configured for UDMA/133
[ 9.397519] scsi 7:0:1:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 9.397539] sas: DONE DISCOVERY on port 1, pid:337, result:0
[ 9.397547] sas: DOING DISCOVERY on port 2, pid:337
[ 9.400437] sas: sas_ata_phy_reset: Found ATA device.
[ 9.404050] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 9.404053] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.407012] ata9.00: configured for UDMA/133
[ 9.407061] scsi 7:0:2:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 9.407081] sas: DONE DISCOVERY on port 2, pid:337, result:0
[ 10.377207] sd 7:0:0:0: Attached scsi generic sg6 type 0
[ 10.377261] sd 7:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.377318] sd 7:0:0:0: [sdf] Write Protect is off
[ 10.377320] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 10.377350] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.377498] sd 7:0:1:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.377508] sdf:
[ 10.377522] sd 7:0:1:0: Attached scsi generic sg7 type 0
[ 10.377563] sd 7:0:1:0: [sdg] Write Protect is off
[ 10.377565] sd 7:0:1:0: [sdg] Mode Sense: 00 3a 00 00
[ 10.377595] sd 7:0:1:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.377786] sdg:
[ 10.377798] sd 7:0:2:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.377832] sd 7:0:2:0: Attached scsi generic sg8 type 0
[ 10.377855] sd 7:0:2:0: [sdh] Write Protect is off
[ 10.377857] sd 7:0:2:0: [sdh] Mode Sense: 00 3a 00 00
[ 10.377887] sd 7:0:2:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.378029] sdh: sdf1
[ 10.784590] sdf: p1 size 3907029168 exceeds device capacity, limited to end of disk
[ 10.784843] sd 7:0:0:0: [sdf] Attached SCSI disk
[ 10.788125] sdg1
[ 10.788356] sdg: p1 size 3907029168 exceeds device capacity, limited to end of disk
[ 10.788594] sd 7:0:1:0: [sdg] Attached SCSI disk
[ 10.815415] sdh1
[ 10.815644] sd 7:0:2:0: [sdh] Attached SCSI disk
[ 11.891627] scsi8 : mvsas
[ 11.891976] mvsas 0000:0a:00.0: mvsas: driver version 0.8.2
[ 11.891999] xen: registering gsi 19 triggering 0 polarity 1
[ 11.892002] xen_allocate_pirq: returning irq 19 for gsi 19
[ 11.892003] xen: --> irq=19
[ 11.892007] Already setup the GSI :19
[ 11.892009] mvsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 11.892017] mvsas 0000:0a:00.0: setting latency timer to 64
[ 11.895182] mvsas 0000:0a:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 14.693738] scsi9 : mvsas
[ 14.694712] initcall mvs_init+0x0/0x4e [mvsas] returned 0 after 10391985 usecs
[ 14.694741] sas: phy-9:0 added to port-9:0, phy_mask:0x1 ( 0)
[ 14.694749] sas: DOING DISCOVERY on port 0, pid:348
[ 14.696257] sas: sas_ata_phy_reset: Found ATA device.
[ 14.725017] ata10.00: ATA-8: ST31000333AS, SD35, max UDMA/133
[ 14.725021] ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 14.766978] ata10.00: configured for UDMA/133
[ 14.767037] scsi 9:0:0:0: Direct-Access ATA ST31000333AS SD35 PQ: 0 ANSI: 5
[ 14.767058] sas: DONE DISCOVERY on port 0, pid:348, result:0
[ 14.767091] sas: phy-9:1 added to port-9:1, phy_mask:0x2 ( 100000000000000)
[ 14.767114] sas: phy-9:3 added to port-9:2, phy_mask:0x8 ( 300000000000000)
[ 14.767121] sas: DOING DISCOVERY on port 1, pid:348
[ 14.770508] sas: sas_ata_phy_reset: Found ATA device.
[ 14.774111] ata11.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 14.774118] ata11.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 14.778151] ata11.00: configured for UDMA/133
[ 14.778202] scsi 9:0:1:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 14.778221] sas: DONE DISCOVERY on port 1, pid:348, result:0
[ 14.778228] sas: DOING DISCOVERY on port 2, pid:348
[ 14.781304] sas: sas_ata_phy_reset: Found ATA device.
[ 14.784449] ata12.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 14.784456] ata12.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 14.787645] ata12.00: configured for UDMA/133
[ 14.787693] scsi 9:0:2:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 14.787713] sas: DONE DISCOVERY on port 2, pid:348, result:0
[ 15.010544] calling wait_scan_init+0x0/0xa [scsi_wait_scan] @ 371
[ 15.010549] initcall wait_scan_init+0x0/0xa [scsi_wait_scan] returned 0 after 0 usecs
[ 15.101582] calling dm_init+0x0/0x3f [dm_mod] @ 387
[ 15.101730] device-mapper: uevent: version 1.0.3
[ 15.101882] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 15.101891] initcall dm_init+0x0/0x3f [dm_mod] returned 0 after 292 usecs
[ 15.625626] PM: Starting manual resume from disk
[ 15.625629] PM: Resume from partition 253:1
[ 15.625631] PM: Checking hibernation image.
[ 15.625829] PM: Error -22 checking image file
[ 15.625833] PM: Resume from disk failed.
[ 15.631487] calling journal_init+0x0/0xa8 [jbd2] @ 411
[ 15.631636] initcall journal_init+0x0/0xa8 [jbd2] returned 0 after 138 usecs
[ 15.632345] calling init_mbcache+0x0/0x11 [mbcache] @ 411
[ 15.632350] initcall init_mbcache+0x0/0x11 [mbcache] returned 0 after 0 usecs
[ 15.638798] calling init_ext4_fs+0x0/0xe1 [ext4] @ 411
[ 15.639033] initcall init_ext4_fs+0x0/0xe1 [ext4] returned 0 after 219 usecs
[ 15.660265] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 15.695325] sd 9:0:0:0: Attached scsi generic sg9 type 0
[ 15.695372] sd 9:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 15.695442] sd 9:0:0:0: [sdi] Write Protect is off
[ 15.695444] sd 9:0:1:0: Attached scsi generic sg10 type 0
[ 15.695448] sd 9:0:0:0: [sdi] Mode Sense: 00 3a 00 00
[ 15.695489] sd 9:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.695507] sd 9:0:1:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 15.695562] sd 9:0:2:0: Attached scsi generic sg11 type 0
[ 15.695581] sd 9:0:1:0: [sdj] Write Protect is off
[ 15.695584] sd 9:0:1:0: [sdj] Mode Sense: 00 3a 00 00
[ 15.695620] sd 9:0:1:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.695647] sd 9:0:2:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 15.695681] sdi:
[ 15.695716] sd 9:0:2:0: [sdk] Write Protect is off
[ 15.695719] sd 9:0:2:0: [sdk] Mode Sense: 00 3a 00 00
[ 15.695750] sd 9:0:2:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.695804] sdj:
[ 15.695911] sdk: sdi1
[ 15.718770] sd 9:0:0:0: [sdi] Attached SCSI disk
[ 16.103169] sdj1
[ 16.103400] sdj: p1 size 3907029168 exceeds device capacity, limited to end of disk
[ 16.103647] sd 9:0:1:0: [sdj] Attached SCSI disk
[ 16.155330] sdk1
[ 16.155567] sd 9:0:2:0: [sdk] Attached SCSI disk
[ 16.827820] <30>udevd[479]: starting version 171
[ 17.402635] calling acpi_button_init+0x0/0x53 [button] @ 517
[ 17.402705] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 17.402711] ACPI: Power Button [PWRB]
[ 17.402753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 17.402757] ACPI: Power Button [PWRF]
[ 17.402779] initcall acpi_button_init+0x0/0x53 [button] returned 0 after 135 usecs
[ 17.411296] calling xen_acpi_processor_extcntl_init+0x0/0x4a [acpi_processor] @ 501
[ 17.411300] initcall xen_acpi_processor_extcntl_init+0x0/0x4a [acpi_processor] returned 0 after 0 usecs
[ 17.542676] <30>udevd[516]: renamed network interface eth0 to eth0-lan
[ 17.543349] <30>udevd[520]: renamed network interface eth1 to eth1-wan
[ 17.564062] calling acpi_processor_init+0x0/0x13b [processor] @ 506
[ 17.565537] ACPI: SSDT 000000009f78e150 0265C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 17.566284] ACPI: SSDT 000000009f7907b0 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 17.569634] calling pci_hotplug_init+0x0/0x44 [pci_hotplug] @ 605
[ 17.569637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.569642] initcall pci_hotplug_init+0x0/0x44 [pci_hotplug] returned 0 after 2 usecs
[ 17.569926] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.571441] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.572480] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.573375] calling serio_raw_init+0x0/0x1a [serio_raw] @ 627
[ 17.573394] initcall serio_raw_init+0x0/0x1a [serio_raw] returned 0 after 13 usecs
[ 17.573440] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.574608] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.575638] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.576614] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.577580] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3])
[ 17.577646] initcall acpi_processor_init+0x0/0x13b [processor] returned 0 after 13257 usecs
[ 17.585244] calling pcspkr_init+0x0/0xc [pcspkr] @ 626
[ 17.585296] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 17.585313] initcall pcspkr_init+0x0/0xc [pcspkr] returned 0 after 63 usecs
[ 17.608072] calling evdev_init+0x0/0xc [evdev] @ 632
[ 17.608267] initcall evdev_init+0x0/0xc [evdev] returned 0 after 180 usecs
[ 17.624928] calling psmouse_init+0x0/0x75 [psmouse] @ 628
[ 17.625292] initcall psmouse_init+0x0/0x75 [psmouse] returned 0 after 340 usecs
[ 17.641215] calling shpcd_init+0x0/0x5d [shpchp] @ 605
[ 17.641507] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.641522] initcall shpcd_init+0x0/0x5d [shpchp] returned 0 after 284 usecs
[ 17.694392] calling i2c_init+0x0/0x77 [i2c_core] @ 625
[ 17.694424] initcall i2c_init+0x0/0x77 [i2c_core] returned 0 after 24 usecs
[ 17.695977] calling acpi_wmi_init+0x0/0x50 [wmi] @ 596
[ 17.696043] ACPI: WMI: Mapper loaded
[ 17.696048] initcall acpi_wmi_init+0x0/0x50 [wmi] returned 0 after 64 usecs
[ 17.738475] calling i2c_i801_init+0x0/0xbb [i2c_i801] @ 625
[ 17.738577] xen: registering gsi 18 triggering 0 polarity 1
[ 17.738583] xen_allocate_pirq: returning irq 18 for gsi 18
[ 17.738588] xen: --> irq=18
[ 17.738597] Already setup the GSI :18
[ 17.738603] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 17.738715] initcall i2c_i801_init+0x0/0xbb [i2c_i801] returned 0 after 223 usecs
[ 19.913456] calling cxgb3_init_module+0x0/0x22 [cxgb3] @ 996
[ 19.913598] initcall cxgb3_init_module+0x0/0x22 [cxgb3] returned 0 after 104 usecs
[ 19.984253] calling fw_core_init+0x0/0x8d [firewire_core] @ 1021
[ 19.984732] initcall fw_core_init+0x0/0x8d [firewire_core] returned 0 after 451 usecs
[ 20.093968] calling sbp2_init+0x0/0x3d [firewire_sbp2] @ 1021
[ 20.094562] initcall sbp2_init+0x0/0x3d [firewire_sbp2] returned 0 after 568 usecs
[ 20.130874] calling loop_init+0x0/0x19c [loop] @ 1047
[ 20.244943] loop: module loaded
[ 20.244955] initcall loop_init+0x0/0x19c [loop] returned 0 after 111394 usecs
[ 20.290542] calling evtchn_init+0x0/0x61 [xen_evtchn] @ 1266
[ 20.290599] Event-channel device installed.
[ 20.290606] initcall evtchn_init+0x0/0x61 [xen_evtchn] returned 0 after 55 usecs
[ 20.320880] calling xenfs_init+0x0/0x60 [xenfs] @ 1329
[ 20.320903] initcall xenfs_init+0x0/0x60 [xenfs] returned 0 after 15 usecs
[ 21.148084] Adding 1949688k swap on /dev/mapper/VMStore-swap. Priority:-1 extents:1 across:1949688k
[ 21.507066] calling journal_init+0x0/0x8f [jbd] @ 1474
[ 21.507124] initcall journal_init+0x0/0x8f [jbd] returned 0 after 43 usecs
[ 21.537101] calling init_ext3_fs+0x0/0x79 [ext3] @ 1474
[ 21.537232] initcall init_ext3_fs+0x0/0x79 [ext3] returned 0 after 111 usecs
[ 21.553768] kjournald starting. Commit interval 5 seconds
[ 21.554103] EXT3 FS on sda1, internal journal
[ 21.554113] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.883669] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth4-cp3 instead
[ 24.013412] calling br_init+0x0/0xc5 [bridge] @ 1910
[ 24.013509] Bridge firewalling registered
[ 24.013524] initcall br_init+0x0/0xc5 [bridge] returned 0 after 96 usecs
[ 24.047996] device eth0-lan entered promiscuous mode
[ 24.055025] sky2 eth0-lan: enabling interface
[ 24.057402] ADDRCONF(NETDEV_UP): eth0-lan: link is not ready
[ 24.063298] xenbr0: starting userspace STP failed, starting kernel STP
[ 26.606433] sky2 eth0-lan: Link is up at 1000 Mbps, full duplex, flow control rx
[ 26.608944] ADDRCONF(NETDEV_CHANGE): eth0-lan: link becomes ready
[ 26.608999] xenbr0: topology change detected, propagating
[ 26.609006] xenbr0: port 1(eth0-lan) entering forwarding state
[ 27.363206] device eth1-wan entered promiscuous mode
[ 27.371280] sky2 eth1-wan: enabling interface
[ 27.373679] ADDRCONF(NETDEV_UP): eth1-wan: link is not ready
[ 29.841311] sky2 eth1-wan: Link is up at 1000 Mbps, full duplex, flow control rx
[ 29.843877] ADDRCONF(NETDEV_CHANGE): eth1-wan: link becomes ready
[ 29.844063] xenbr1: port 1(eth1-wan) entering forwarding state
[ 31.285966] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth4-cp3 instead
[ 31.295272] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth4-cp3 instead
[ 32.914192] calling init_sunrpc+0x0/0x53 [sunrpc] @ 2772
[ 32.928968] RPC: Registered udp transport module.
[ 32.928974] RPC: Registered tcp transport module.
[ 32.928979] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 32.929006] initcall init_sunrpc+0x0/0x53 [sunrpc] returned 0 after 14440 usecs
[ 32.961807] calling init_rpcsec_gss+0x0/0x43 [auth_rpcgss] @ 2781
[ 32.961835] initcall init_rpcsec_gss+0x0/0x43 [auth_rpcgss] returned 0 after 16 usecs
[ 32.996264] calling fscache_init+0x0/0xaf [fscache] @ 2781
[ 32.996271] Slow work thread pool: Starting up
[ 32.996718] Slow work thread pool: Ready
[ 32.996821] FS-Cache: Loaded
[ 32.996835] initcall fscache_init+0x0/0xaf [fscache] returned 0 after 542 usecs
[ 33.006979] calling init_nlm+0x0/0x1f [lockd] @ 2781
[ 33.007052] initcall init_nlm+0x0/0x1f [lockd] returned 0 after 58 usecs
[ 33.042790] calling init_nfs_fs+0x0/0x13f [nfs] @ 2781
[ 33.042859] FS-Cache: Netfs 'nfs' registered for caching
[ 33.043393] initcall init_nfs_fs+0x0/0x13f [nfs] returned 0 after 563 usecs
[ 33.071830] calling init_nfsd+0x0/0xd9 [nfsd] @ 2785
[ 33.071836] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 33.072598] initcall init_nfsd+0x0/0xd9 [nfsd] returned 0 after 729 usecs
[ 33.447732] calling fuse_init+0x0/0x136 [fuse] @ 2829
[ 33.447738] fuse init (API version 7.13)
[ 33.448043] initcall fuse_init+0x0/0x136 [fuse] returned 0 after 288 usecs
[ 34.371858] calling init_misc_binfmt+0x0/0x3a [binfmt_misc] @ 2973
[ 34.371876] initcall init_misc_binfmt+0x0/0x3a [binfmt_misc] returned 0 after 6 usecs
[ 34.676354] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 34.694267] NFSD: starting 90-second grace period
[ 34.967356] xenbr0: no IPv6 routers present
[ 35.231013] calling cpufreq_gov_dbs_init+0x0/0x64 [cpufreq_conservative] @ 3137
[ 35.233130] initcall cpufreq_gov_dbs_init+0x0/0x64 [cpufreq_conservative] returned 0 after 2054 usecs
[ 35.487901] calling cpufreq_stats_init+0x0/0x91 [cpufreq_stats] @ 3167
[ 35.487917] initcall cpufreq_stats_init+0x0/0x91 [cpufreq_stats] returned 0 after 6 usecs
[ 35.613860] calling cpufreq_gov_powersave_init+0x0/0xc [cpufreq_powersave] @ 3206
[ 35.613871] initcall cpufreq_gov_powersave_init+0x0/0xc [cpufreq_powersave] returned 0 after 0 usecs
[ 35.943059] calling cpufreq_gov_userspace_init+0x0/0xc [cpufreq_userspace] @ 3223
[ 35.943070] initcall cpufreq_gov_userspace_init+0x0/0xc [cpufreq_userspace] returned 0 after 0 usecs
[ 36.129856] alloc irq_desc for 2246 on node -1
[ 36.129858] alloc kstat_irqs on node -1
[ 36.129964] alloc irq_desc for 2245 on node -1
[ 36.129966] alloc kstat_irqs on node -1
[ 36.130246] XENBUS: Unable to read cpu state
[ 36.132257] XENBUS: Unable to read cpu state
[ 36.132533] XENBUS: Unable to read cpu state
[ 36.132768] XENBUS: Unable to read cpu state
[ 36.133002] XENBUS: Unable to read cpu state
[ 36.133200] XENBUS: Unable to read cpu state
[ 36.133392] XENBUS: Unable to read cpu state
[ 36.133557] XENBUS: Unable to read cpu state
[ 36.181027] calling acpi_cpufreq_init+0x0/0xc8 [acpi_cpufreq] @ 3288
[ 36.181097] initcall acpi_cpufreq_init+0x0/0xc8 [acpi_cpufreq] returned -19 after 55 usecs
[ 36.201167] calling acpi_cpufreq_init+0x0/0xc8 [acpi_cpufreq] @ 3325
[ 36.201273] initcall acpi_cpufreq_init+0x0/0xc8 [acpi_cpufreq] returned -19 after 91 usecs
[ 37.557101] xenbr1: no IPv6 routers present
[ 37.936719] calling rfkill_init+0x0/0x87 [rfkill] @ 3645
[ 37.936813] initcall rfkill_init+0x0/0x87 [rfkill] returned 0 after 79 usecs
[ 37.957555] calling bt_init+0x0/0x5b [bluetooth] @ 3645
[ 37.957561] Bluetooth: Core ver 2.15
[ 37.957874] NET: Registered protocol family 31
[ 37.957881] Bluetooth: HCI device and connection manager initialized
[ 37.957894] Bluetooth: HCI socket layer initialized
[ 37.957912] initcall bt_init+0x0/0x5b [bluetooth] returned 0 after 330 usecs
[ 38.968030] calling parport_default_proc_register+0x0/0x18 [parport] @ 3706
[ 38.968089] initcall parport_default_proc_register+0x0/0x18 [parport] returned 0 after 45 usecs
[ 38.992252] calling lp_init_module+0x0/0x254 [lp] @ 3706
[ 38.996780] lp: driver loaded but no devices found
[ 38.996791] initcall lp_init_module+0x0/0x254 [lp] returned 0 after 4421 usecs
[ 39.070041] calling ppdev_init+0x0/0xc8 [ppdev] @ 3710
[ 39.074703] ppdev: user-space parallel port driver
[ 39.074714] initcall ppdev_init+0x0/0xc8 [ppdev] returned 0 after 4552 usecs
[ 39.084641] calling parport_pc_init+0x0/0x353 [parport_pc] @ 3713
[ 39.085624] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 39.085697] parport0: irq 7 detected
[ 39.167551] lp0: using parport0 (polling).
[ 39.167727] initcall parport_pc_init+0x0/0x353 [parport_pc] returned 0 after 81125 usecs
[ 40.223823] xenbr2: no IPv6 routers present
[ 40.927196] xenbr3: no IPv6 routers present
[ 41.917192] xenbr4: no IPv6 routers present
[ 42.380461] xenbr5: no IPv6 routers present
[-- Attachment #3: log-2.6.32.41-interrupts --]
[-- Type: application/octet-stream, Size: 8849 bytes --]
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
1: 2 0 0 0 0 0 0 0 xen-pirq-ioapic-edge i8042
8: 2 0 0 0 0 0 0 0 xen-pirq-ioapic-edge rtc0
12: 4 0 0 0 0 0 0 0 xen-pirq-ioapic-edge i8042
16: 0 0 0 0 0 0 0 0 xen-pirq-ioapic-level mvsas
17: 545 0 0 0 0 0 0 0 xen-pirq-ioapic-level mvsas
18: 0 0 0 0 0 0 0 0 xen-pirq-ioapic-level mvsas
19: 442 0 0 0 0 0 0 0 xen-pirq-ioapic-level mvsas
20: 0 0 0 0 0 0 0 0 xen-pirq-ioapic-level acpi
2245: 0 0 0 0 0 0 0 0 xen-dyn-event evtchn:xenstored
2246: 56 0 0 0 0 0 0 0 xen-dyn-event evtchn:xenstored
2247: 4700 0 0 0 0 0 0 0 xen-pirq-msi ahci
2248: 46 0 0 0 0 0 0 0 xen-pirq-msi sky2@pci:0000:0d:00.0
2249: 4782 0 0 0 0 0 0 0 xen-pirq-msi sky2@pci:0000:0c:00.0
2251: 0 0 0 0 0 0 0 0 xen-percpu-virq mce
2260: 0 0 0 0 0 0 0 0 xen-pirq-msi aerdrv
2261: 0 0 0 0 0 0 0 0 xen-pirq-msi aerdrv
2262: 0 0 0 0 0 0 0 0 xen-percpu-virq pcpu
2263: 77 0 0 0 0 0 0 0 xen-dyn-event xenbus
2264: 0 0 0 0 0 0 0 800 xen-percpu-ipi callfuncsingle7
2265: 0 0 0 0 0 0 0 0 xen-percpu-virq debug7
2266: 0 0 0 0 0 0 0 266 xen-percpu-ipi callfunc7
2267: 0 0 0 0 0 0 0 2015 xen-percpu-ipi resched7
2268: 0 0 0 0 0 0 0 6500 xen-percpu-virq timer7
2269: 0 0 0 0 0 0 675 0 xen-percpu-ipi callfuncsingle6
2270: 0 0 0 0 0 0 0 0 xen-percpu-virq debug6
2271: 0 0 0 0 0 0 281 0 xen-percpu-ipi callfunc6
2272: 0 0 0 0 0 0 1731 0 xen-percpu-ipi resched6
2273: 0 0 0 0 0 0 6234 0 xen-percpu-virq timer6
2274: 0 0 0 0 0 990 0 0 xen-percpu-ipi callfuncsingle5
2275: 0 0 0 0 0 0 0 0 xen-percpu-virq debug5
2276: 0 0 0 0 0 287 0 0 xen-percpu-ipi callfunc5
2277: 0 0 0 0 0 1940 0 0 xen-percpu-ipi resched5
2278: 0 0 0 0 0 6844 0 0 xen-percpu-virq timer5
2279: 0 0 0 0 1058 0 0 0 xen-percpu-ipi callfuncsingle4
2280: 0 0 0 0 0 0 0 0 xen-percpu-virq debug4
2281: 0 0 0 0 307 0 0 0 xen-percpu-ipi callfunc4
2282: 0 0 0 0 1967 0 0 0 xen-percpu-ipi resched4
2283: 0 0 0 0 7875 0 0 0 xen-percpu-virq timer4
2284: 0 0 0 1184 0 0 0 0 xen-percpu-ipi callfuncsingle3
2285: 0 0 0 0 0 0 0 0 xen-percpu-virq debug3
2286: 0 0 0 301 0 0 0 0 xen-percpu-ipi callfunc3
2287: 0 0 0 1955 0 0 0 0 xen-percpu-ipi resched3
2288: 0 0 0 5934 0 0 0 0 xen-percpu-virq timer3
2289: 0 0 1285 0 0 0 0 0 xen-percpu-ipi callfuncsingle2
2290: 0 0 0 0 0 0 0 0 xen-percpu-virq debug2
2291: 0 0 286 0 0 0 0 0 xen-percpu-ipi callfunc2
2292: 0 0 1933 0 0 0 0 0 xen-percpu-ipi resched2
2293: 0 0 7746 0 0 0 0 0 xen-percpu-virq timer2
2294: 0 881 0 0 0 0 0 0 xen-percpu-ipi callfuncsingle1
2295: 0 0 0 0 0 0 0 0 xen-percpu-virq debug1
2296: 0 278 0 0 0 0 0 0 xen-percpu-ipi callfunc1
2297: 0 2341 0 0 0 0 0 0 xen-percpu-ipi resched1
2298: 0 9678 0 0 0 0 0 0 xen-percpu-virq timer1
2299: 256 0 0 0 0 0 0 0 xen-percpu-ipi callfuncsingle0
2300: 0 0 0 0 0 0 0 0 xen-percpu-virq debug0
2301: 274 0 0 0 0 0 0 0 xen-percpu-ipi callfunc0
2302: 2569 0 0 0 0 0 0 0 xen-percpu-ipi resched0
2303: 12727 0 0 0 0 0 0 0 xen-percpu-virq timer0
NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 0 0 0 0 0 0 0 0 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
PND: 0 0 0 0 0 0 0 0 Performance pending work
RES: 2569 2341 1933 1955 1967 1940 1731 2015 Rescheduling interrupts
CAL: 530 1159 1571 1485 1365 1277 956 1066 Function call interrupts
TLB: 0 0 0 0 0 0 0 0 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 2 2 2 2 Machine check polls
ERR: 0
MIS: 0
[-- Attachment #4: log-3.0-dmesg --]
[-- Type: application/octet-stream, Size: 115667 bytes --]
[-- Attachment #5: log-3.0-interrupts --]
[-- Type: application/octet-stream, Size: 8601 bytes --]
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
1: 4 0 0 0 0 0 0 0 xen-pirq-ioapic-edge i8042
3: 0 0 0 0 0 0 0 0 xen-pirq-ioapic-edge mvsas
5: 0 0 0 0 0 0 0 0 xen-pirq-ioapic-edge mvsas
8: 3 0 0 0 0 0 0 0 xen-pirq-ioapic-edge rtc0
10: 0 0 0 0 0 0 0 0 xen-pirq-ioapic-edge mvsas
11: 0 0 0 0 0 0 0 0 xen-pirq-ioapic-edge mvsas
12: 6 0 0 0 0 0 0 0 xen-pirq-ioapic-edge i8042
272: 15309 0 0 0 0 0 0 0 xen-percpu-virq timer0
273: 2640 0 0 0 0 0 0 0 xen-percpu-ipi resched0
274: 216 0 0 0 0 0 0 0 xen-percpu-ipi callfunc0
275: 0 0 0 0 0 0 0 0 xen-percpu-virq debug0
276: 81 0 0 0 0 0 0 0 xen-percpu-ipi callfuncsingle0
277: 0 7126 0 0 0 0 0 0 xen-percpu-virq timer1
278: 0 2769 0 0 0 0 0 0 xen-percpu-ipi resched1
279: 0 303 0 0 0 0 0 0 xen-percpu-ipi callfunc1
280: 0 0 0 0 0 0 0 0 xen-percpu-virq debug1
281: 0 536 0 0 0 0 0 0 xen-percpu-ipi callfuncsingle1
282: 0 0 7029 0 0 0 0 0 xen-percpu-virq timer2
283: 0 0 1734 0 0 0 0 0 xen-percpu-ipi resched2
284: 0 0 246 0 0 0 0 0 xen-percpu-ipi callfunc2
285: 0 0 0 0 0 0 0 0 xen-percpu-virq debug2
286: 0 0 2605 0 0 0 0 0 xen-percpu-ipi callfuncsingle2
287: 0 0 0 7926 0 0 0 0 xen-percpu-virq timer3
288: 0 0 0 2816 0 0 0 0 xen-percpu-ipi resched3
289: 0 0 0 280 0 0 0 0 xen-percpu-ipi callfunc3
290: 0 0 0 0 0 0 0 0 xen-percpu-virq debug3
291: 0 0 0 536 0 0 0 0 xen-percpu-ipi callfuncsingle3
292: 0 0 0 0 6211 0 0 0 xen-percpu-virq timer4
293: 0 0 0 0 1841 0 0 0 xen-percpu-ipi resched4
294: 0 0 0 0 232 0 0 0 xen-percpu-ipi callfunc4
295: 0 0 0 0 0 0 0 0 xen-percpu-virq debug4
296: 0 0 0 0 1203 0 0 0 xen-percpu-ipi callfuncsingle4
297: 0 0 0 0 0 7263 0 0 xen-percpu-virq timer5
298: 0 0 0 0 0 2769 0 0 xen-percpu-ipi resched5
299: 0 0 0 0 0 283 0 0 xen-percpu-ipi callfunc5
300: 0 0 0 0 0 0 0 0 xen-percpu-virq debug5
301: 0 0 0 0 0 544 0 0 xen-percpu-ipi callfuncsingle5
302: 0 0 0 0 0 0 8521 0 xen-percpu-virq timer6
303: 0 0 0 0 0 0 1602 0 xen-percpu-ipi resched6
304: 0 0 0 0 0 0 229 0 xen-percpu-ipi callfunc6
305: 0 0 0 0 0 0 0 0 xen-percpu-virq debug6
306: 0 0 0 0 0 0 2952 0 xen-percpu-ipi callfuncsingle6
307: 0 0 0 0 0 0 0 8950 xen-percpu-virq timer7
308: 0 0 0 0 0 0 0 2625 xen-percpu-ipi resched7
309: 0 0 0 0 0 0 0 290 xen-percpu-ipi callfunc7
310: 0 0 0 0 0 0 0 0 xen-percpu-virq debug7
311: 0 0 0 0 0 0 0 527 xen-percpu-ipi callfuncsingle7
312: 85 0 0 0 0 0 0 0 xen-dyn-event xenbus
313: 0 0 0 0 0 0 0 0 xen-percpu-virq pcpu
314: 0 0 0 0 0 0 0 0 xen-pirq-msi PCIe PME
316: 0 0 0 0 0 0 0 0 xen-pirq-msi PCIe PME
318: 3743 0 0 0 0 0 0 0 xen-pirq-msi sky2@pci:0000:0c:00.0
319: 51 0 0 0 0 0 0 0 xen-pirq-msi sky2@pci:0000:0d:00.0
320: 7913 0 0 0 0 0 0 0 xen-pirq-msi ahci
321: 57 0 0 0 0 0 0 0 xen-dyn-event evtchn:xenstored
322: 0 0 0 0 0 0 0 0 xen-dyn-event evtchn:xenstored
NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 0 0 0 0 0 0 0 0 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts
RES: 2640 2769 1734 2816 1841 2769 1602 2625 Rescheduling interrupts
CAL: 297 839 2851 816 1435 827 3181 817 Function call interrupts
TLB: 0 0 0 0 0 0 0 0 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 0 0 0 0 0 0 0 0 Machine check polls
ERR: 0
MIS: 0
[-- Attachment #6: log-xen-dmesg --]
[-- Type: application/octet-stream, Size: 12193 bytes --]
__ __ _ _ ____ _ _ _
\ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.2-unstable (root@localhost) (gcc version 4.6.1 20110526 (prerelease) (Debian 4.6.0-10) ) Sat Jun 25 22:19:45 SGT 2011
(XEN) Latest ChangeSet: Mon Jun 06 09:56:08 2011 +0100 23500:c231a26a2932
(XEN) Bootloader: GRUB 1.99-6
(XEN) Command line: placeholder dom0_mem=1024M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 5 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e400 (usable)
(XEN) 000000000009e400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000009f780000 (usable)
(XEN) 000000009f780000 - 000000009f78e000 (ACPI data)
(XEN) 000000009f78e000 - 000000009f7d0000 (ACPI NVS)
(XEN) 000000009f7d0000 - 000000009f7e0000 (reserved)
(XEN) 000000009f7ed000 - 00000000a0000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffa00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000460000000 (usable)
(XEN) ACPI: RSDP 000F9AA0, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT 9F780100, 005C (r1 090909 XSDT1600 20090909 MSFT 97)
(XEN) ACPI: FACP 9F780290, 00F4 (r4 090909 FACP1600 20090909 MSFT 97)
(XEN) ACPI: DSDT 9F780460, 5910 (r2 1E659 1E659A27 A27 INTL 20051117)
(XEN) ACPI: FACS 9F78E000, 0040
(XEN) ACPI: APIC 9F780390, 008C (r2 090909 APIC1600 20090909 MSFT 97)
(XEN) ACPI: MCFG 9F780420, 003C (r1 090909 OEMMCFG 20090909 MSFT 97)
(XEN) ACPI: OEMB 9F78E040, 0072 (r1 090909 OEMB1600 20090909 MSFT 97)
(XEN) ACPI: HPET 9F78A460, 0038 (r1 090909 OEMHPET 20090909 MSFT 97)
(XEN) ACPI: DMAR 9F78E0C0, 0090 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: SSDT 9F790E30, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117)
(XEN) System RAM: 16375MB (16768120kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000460000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[9f78e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:14 APIC version 21
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2929.740 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1179: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 8 CPUs
(XEN) HPET: 8 timers (8 will be used for broadcast)
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x43f000
(XEN) elf_parse_binary: phdr: paddr=0x143f000 memsz=0x8d6b0
(XEN) elf_parse_binary: phdr: paddr=0x14cd000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x14ce000 memsz=0x16218
(XEN) elf_parse_binary: phdr: paddr=0x14e5000 memsz=0x28a000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x176f000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff814e5200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff8176f000
(XEN) virt_entry = 0xffffffff814e5200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x176f000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000450000000->0000000452000000 (247058 pages to be allocated)
(XEN) Init. ramdisk: 000000045e512000->000000045ffffa00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff8176f000
(XEN) Init. ramdisk: ffffffff8176f000->ffffffff8325ca00
(XEN) Phys-Mach map: ffffffff8325d000->ffffffff8345d000
(XEN) Start info: ffffffff8345d000->ffffffff8345d4b4
(XEN) Page tables: ffffffff8345e000->ffffffff8347d000
(XEN) Boot stack: ffffffff8347d000->ffffffff8347e000
(XEN) TOTAL: ffffffff80000000->ffffffff83800000
(XEN) ENTRY ADDRESS: ffffffff814e5200
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8143f000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8143f000 -> 0xffffffff814cc6b0
(XEN) elf_load_binary: phdr 2 at 0xffffffff814cd000 -> 0xffffffff814cd888
(XEN) elf_load_binary: phdr 3 at 0xffffffff814ce000 -> 0xffffffff814e4218
(XEN) elf_load_binary: phdr 4 at 0xffffffff814e5000 -> 0xffffffff81560000
(XEN) Scrubbing Free RAM: .......................................................................................................................................................done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 236kB init memory.
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:05.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:08.1
(XEN) PCI add device 00:08.2
(XEN) PCI add device 00:08.3
(XEN) PCI add device 00:10.0
(XEN) PCI add device 00:10.1
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1c.5
(XEN) PCI add device 00:1c.7
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:00.0
(XEN) PCI add device 01:00.1
(XEN) PCI add device 02:00.0
(XEN) PCI add device 03:00.0
(XEN) PCI add device 03:02.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 06:02.0
(XEN) PCI add device 06:03.0
(XEN) PCI add device 06:04.0
(XEN) PCI add device 06:05.0
(XEN) PCI add device 07:00.0
(XEN) PCI add device 08:00.0
(XEN) PCI add device 09:00.0
(XEN) PCI add device 0a:00.0
(XEN) PCI add device 0c:00.0
(XEN) PCI add device 0d:00.0
(XEN) PCI add device 0f:03.0
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
[-- Attachment #7: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 18:23 ` Liwei
@ 2011-06-27 18:59 ` Konrad Rzeszutek Wilk
2011-06-27 19:10 ` Konrad Rzeszutek Wilk
1 sibling, 0 replies; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-27 18:59 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Tue, Jun 28, 2011 at 02:23:09AM +0800, Liwei wrote:
> On 28 June 2011 01:33, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> >
> > Hmm. Can you attach the full serial log and on the Linux kernel line have
> > 'loglevel=10 debug initcall_debug' please?
>
> See attached.
>
> >
> > Is the serial log when running under 2.6.32 any different? (up to the ACPI interpretter
> > blowing up)? What does the /proc/interrupts look under 2.6.32?
>
> There's too much noise for me to compare, but I think they're more or
> less the same until the the interpreter blows up for 3.0 whereas
> 2.6.32 does not.
What is weird is:
1
[ 3.970863] ACPI: SCI (IRQ9) allocation failed
[ 3.970906] ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20110413/evevent-119)
[ 3.970911] ACPI: Unable to start the ACPI Interpreter
IRQ9.. It looks like it really wants to use 9 instead of 20.
Looking at the code it does:
144 status =
145 acpi_os_install_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
146 acpi_ev_sci_xrupt_handler,
147 acpi_gbl_gpe_xrupt_list_head);
So it uses the acpi_glb_FADT.sci_interrupt. I think the best path
is to stick a bunch of printks in drivers/acpi/osl.c in acpi_os_install_interrupt_handler
and see what gsi, acpi_gbl_FADT.sci_interrupt, and what 'irq' end up being.
>
> I've attached the /proc/interrupts dump for both kernel versions. The
> difference to note is that IRQ 20 does appear in 2.6.32.
>
> Also attached is the xen dmesg.
Ok, let me look at them in some more details.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 18:23 ` Liwei
2011-06-27 18:59 ` Konrad Rzeszutek Wilk
@ 2011-06-27 19:10 ` Konrad Rzeszutek Wilk
2011-06-27 19:18 ` Liwei
1 sibling, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-27 19:10 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Tue, Jun 28, 2011 at 02:23:09AM +0800, Liwei wrote:
> On 28 June 2011 01:33, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> >
> > Hmm. Can you attach the full serial log and on the Linux kernel line have
> > 'loglevel=10 debug initcall_debug' please?
>
> See attached.
>
> >
> > Is the serial log when running under 2.6.32 any different? (up to the ACPI interpretter
> > blowing up)? What does the /proc/interrupts look under 2.6.32?
>
> There's too much noise for me to compare, but I think they're more or
> less the same until the the interpreter blows up for 3.0 whereas
> 2.6.32 does not.
Another glance shows:
(2.6.32):
[ 3.502771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 3.502773] xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3
[ 3.502775] xen: registering gsi 20 triggering 0 polarity 1
[ 3.502780] alloc irq_desc for 20 on node 0
So it has IRQ 9 mapped to IRQ 20 while in 3.0:
[ 3.803695] xen: --> pirq=7 -> irq=7
[ 3.803699] xen: --> pirq=8 -> irq=8
[ 3.803702] xen: --> pirq=10 -> irq=10
we skip over IRQ 9. We should have gotten something like this:
[ 7.059735] xen_map_pirq_gsi: returning irq 20 for gsi 9
[ 7.064933] xen: --> pirq=20 -> irq=9
But we did not. If you can instrument 'acpi_get_override_irq' to see
at which of the numerous 'return -1' it fails that might narrow down
the issue.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 19:10 ` Konrad Rzeszutek Wilk
@ 2011-06-27 19:18 ` Liwei
2011-06-27 19:30 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-27 19:18 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 28 June 2011 03:10, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
>
> Another glance shows:
>
> (2.6.32):
> [ 3.502771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
> [ 3.502773] xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3
> [ 3.502775] xen: registering gsi 20 triggering 0 polarity 1
> [ 3.502780] alloc irq_desc for 20 on node 0
>
> So it has IRQ 9 mapped to IRQ 20 while in 3.0:
>
> [ 3.803695] xen: --> pirq=7 -> irq=7
> [ 3.803699] xen: --> pirq=8 -> irq=8
> [ 3.803702] xen: --> pirq=10 -> irq=10
>
> we skip over IRQ 9. We should have gotten something like this:
>
> [ 7.059735] xen_map_pirq_gsi: returning irq 20 for gsi 9
> [ 7.064933] xen: --> pirq=20 -> irq=9
>
> But we did not. If you can instrument 'acpi_get_override_irq' to see
> at which of the numerous 'return -1' it fails that might narrow down
> the issue.
>
Erm, do you want me to set up some kernel tracing or just add a printk
to acpi_get_override_irq? My kernel hacking foo is very limited.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 19:18 ` Liwei
@ 2011-06-27 19:30 ` Konrad Rzeszutek Wilk
2011-06-27 20:32 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-27 19:30 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Tue, Jun 28, 2011 at 03:18:21AM +0800, Liwei wrote:
> On 28 June 2011 03:10, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> >
> > Another glance shows:
> >
> > (2.6.32):
> > [ 3.502771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
> > [ 3.502773] xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3
> > [ 3.502775] xen: registering gsi 20 triggering 0 polarity 1
> > [ 3.502780] alloc irq_desc for 20 on node 0
> >
> > So it has IRQ 9 mapped to IRQ 20 while in 3.0:
> >
> > [ 3.803695] xen: --> pirq=7 -> irq=7
> > [ 3.803699] xen: --> pirq=8 -> irq=8
> > [ 3.803702] xen: --> pirq=10 -> irq=10
> >
> > we skip over IRQ 9. We should have gotten something like this:
> >
> > [ 7.059735] xen_map_pirq_gsi: returning irq 20 for gsi 9
> > [ 7.064933] xen: --> pirq=20 -> irq=9
> >
> > But we did not. If you can instrument 'acpi_get_override_irq' to see
> > at which of the numerous 'return -1' it fails that might narrow down
> > the issue.
> >
>
> Erm, do you want me to set up some kernel tracing or just add a printk
> to acpi_get_override_irq? My kernel hacking foo is very limited.
Just splash some printk's around there and print out the values of gsi and pins.
Nothing fancy.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 19:30 ` Konrad Rzeszutek Wilk
@ 2011-06-27 20:32 ` Liwei
2011-06-27 21:09 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-27 20:32 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 1542 bytes --]
Sorry this took a while. Somehow make decided to recompile everything.
Seems like the reason for IRQ 9 not being remapped is idx = -1.
On 28 June 2011 03:30, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> On Tue, Jun 28, 2011 at 03:18:21AM +0800, Liwei wrote:
>> On 28 June 2011 03:10, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
>> >
>> > Another glance shows:
>> >
>> > (2.6.32):
>> > [ 3.502771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
>> > [ 3.502773] xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3
>> > [ 3.502775] xen: registering gsi 20 triggering 0 polarity 1
>> > [ 3.502780] alloc irq_desc for 20 on node 0
>> >
>> > So it has IRQ 9 mapped to IRQ 20 while in 3.0:
>> >
>> > [ 3.803695] xen: --> pirq=7 -> irq=7
>> > [ 3.803699] xen: --> pirq=8 -> irq=8
>> > [ 3.803702] xen: --> pirq=10 -> irq=10
>> >
>> > we skip over IRQ 9. We should have gotten something like this:
>> >
>> > [ 7.059735] xen_map_pirq_gsi: returning irq 20 for gsi 9
>> > [ 7.064933] xen: --> pirq=20 -> irq=9
>> >
>> > But we did not. If you can instrument 'acpi_get_override_irq' to see
>> > at which of the numerous 'return -1' it fails that might narrow down
>> > the issue.
>> >
>>
>> Erm, do you want me to set up some kernel tracing or just add a printk
>> to acpi_get_override_irq? My kernel hacking foo is very limited.
>
> Just splash some printk's around there and print out the values of gsi and pins.
> Nothing fancy.
>
[-- Attachment #2: log-3.0-debugirq-dmesg --]
[-- Type: application/octet-stream, Size: 8404 bytes --]
[ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 272
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 000000009f780000
[ 0.000000] PM: Registered nosave memory: 000000009f780000 - 000000009f78e000
[ 0.000000] PM: Registered nosave memory: 000000009f78e000 - 000000009f7d0000
[ 0.000000] PM: Registered nosave memory: 000000009f7d0000 - 000000009f7e0000
[ 0.000000] PM: Registered nosave memory: 000000009f7e0000 - 000000009f7ed000
[ 0.000000] PM: Registered nosave memory: 000000009f7ed000 - 00000000a0000000
[ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88003eaee000 s76480 r8192 d21824 u106496
[ 0.000000] pcpu-alloc: s76480 r8192 d21824 u106496 alloc=26*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 4.169680] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2574729
[ 4.169682] Policy zone: Normal
[ 4.169685] Kernel command line: placeholder root=/dev/mapper/VMStore-DeusEx ro loglevel=10 debug initcall_debug quiet nomodeset xen-pciback.permissive xen-pciback.hide=(01:00.0)(01:00.1)(00:1a.0)(00:1b.0)(00:1d.0)(0f:03.0) pci=resource_alignment=01:00.0;01:00.1;00:1a.0;00:1b.0;00:1d.0;0f:03.0
[ 4.169734] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 4.193163] Placing 64MB software IO TLB between ffff8800303c3000 - ffff8800343c3000
[ 4.193166] software IO TLB at phys 0x303c3000 - 0x343c3000
[ 4.196198] Memory: 776460k/13631488k available (3239k kernel code, 3146184k absent, 9708844k reserved, 3423k data, 532k init)
[ 4.196281] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 4.196318] Preemptible hierarchical RCU implementation.
[ 4.196331] NR_IRQS:33024 nr_irqs:2048 16
[ 4.196406] acpi_get_override_irq:
[ 4.196408] OK
[ 4.196410] xen: sci override: global_irq=20 trigger=0 polarity=1
[ 4.196412] xen: registering gsi 20 triggering 0 polarity 1
[ 4.196425] xen: --> pirq=20 -> irq=20
[ 4.196432] xen: acpi sci 20
[ 4.196433] acpi_get_override_irq:
[ 4.196435] idx = -1 < 0, returning -1
[ 4.196436] acpi_get_override_irq:
[ 4.196438] OK
[ 4.196442] xen: --> pirq=1 -> irq=1
[ 4.196443] acpi_get_override_irq:
[ 4.196445] OK
[ 4.196448] xen: --> pirq=2 -> irq=2
[ 4.196450] acpi_get_override_irq:
[ 4.196451] OK
[ 4.196454] xen: --> pirq=3 -> irq=3
[ 4.196456] acpi_get_override_irq:
[ 4.196457] OK
[ 4.196461] xen: --> pirq=4 -> irq=4
[ 4.196462] acpi_get_override_irq:
[ 4.196463] OK
[ 4.196467] xen: --> pirq=5 -> irq=5
[ 4.196468] acpi_get_override_irq:
[ 4.196470] OK
[ 4.196473] xen: --> pirq=6 -> irq=6
[ 4.196474] acpi_get_override_irq:
[ 4.196476] OK
[ 4.196479] xen: --> pirq=7 -> irq=7
[ 4.196481] acpi_get_override_irq:
[ 4.196482] OK
[ 4.196485] xen: --> pirq=8 -> irq=8
[ 4.196487] acpi_get_override_irq:
[ 4.196488] idx = -1 < 0, returning -1
[ 4.196490] acpi_get_override_irq:
[ 4.196491] OK
[ 4.196495] xen: --> pirq=10 -> irq=10
[ 4.196496] acpi_get_override_irq:
[ 4.196498] OK
[ 4.196501] xen: --> pirq=11 -> irq=11
[ 4.196502] acpi_get_override_irq:
[ 4.196504] OK
[ 4.196507] xen: --> pirq=12 -> irq=12
[ 4.196509] acpi_get_override_irq:
[ 4.196510] OK
[ 4.196513] xen: --> pirq=13 -> irq=13
[ 4.196515] acpi_get_override_irq:
[ 4.196516] OK
[ 4.196520] xen: --> pirq=14 -> irq=14
[ 4.196521] acpi_get_override_irq:
[ 4.196523] OK
[ 4.196526] xen: --> pirq=15 -> irq=15
[ 4.201914] Console: colour VGA+ 80x25
[ 4.201934] console [tty0] enabled
[ 4.201962] Xen: using vcpuop timer interface
[ 4.201967] installing Xen timer for CPU 0
[ 4.201989] Detected 2929.764 MHz processor.
[ 4.201995] Calibrating delay loop (skipped), value calculated using timer frequency.. 5861.67 BogoMIPS (lpj=9765880)
[ 4.201999] pid_max: default: 32768 minimum: 301
[ 4.202026] Security Framework initialized
[ 4.202029] SELinux: Disabled at boot.
[ 4.206966] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 4.212260] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 4.213664] Mount-cache hash table entries: 256
[ 4.213820] Initializing cgroup subsys cpuacct
[ 4.213826] Initializing cgroup subsys devices
[ 4.213829] Initializing cgroup subsys freezer
[ 4.213831] Initializing cgroup subsys net_cls
[ 4.213884] CPU: Physical Processor ID: 0
[ 4.213886] CPU: Processor Core ID: 0
[ 4.214246] ACPI: Core revision 20110413
[ 4.241400] calling trace_init_flags_sys_exit+0x0/0xd @ 1
[ 4.241404] initcall trace_init_flags_sys_exit+0x0/0xd returned 0 after 0 usecs
[ 4.241407] calling trace_init_flags_sys_enter+0x0/0xd @ 1
[ 4.241409] initcall trace_init_flags_sys_enter+0x0/0xd returned 0 after 0 usecs
[ 4.241413] calling init_hw_perf_events+0x0/0xddc @ 1
[ 4.241415] Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only.
[ 4.241420] initcall init_hw_perf_events+0x0/0xddc returned 0 after 0 usecs
[ 4.241423] calling migration_init+0x0/0x61 @ 1
[ 4.241427] initcall migration_init+0x0/0x61 returned 0 after 0 usecs
[ 4.241429] calling spawn_ksoftirqd+0x0/0x46 @ 1
[ 4.248108] initcall spawn_ksoftirqd+0x0/0x46 returned 0 after 6510 usecs
[ 4.248116] calling init_workqueues+0x0/0x26c @ 1
[ 4.254962] initcall init_workqueues+0x0/0x26c returned 0 after 6510 usecs
[ 4.254966] calling cpu_stop_init+0x0/0x98 @ 1
[ 4.261714] initcall cpu_stop_init+0x0/0x98 returned 0 after 6510 usecs
[ 4.261721] calling relay_init+0x0/0x11 @ 1
[ 4.261728] initcall relay_init+0x0/0x11 returned 0 after 0 usecs
[ 4.261734] calling tracer_alloc_buffers+0x0/0x166 @ 1
[ 4.261771] initcall tracer_alloc_buffers+0x0/0x166 returned 0 after 0 usecs
[ 4.261774] calling init_trace_printk+0x0/0xc @ 1
[ 4.261777] initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs
[ 4.275307] installing Xen timer for CPU 1
[ 4.288910] installing Xen timer for CPU 2
[ 4.302507] installing Xen timer for CPU 3
[ 4.316121] installing Xen timer for CPU 4
[ 4.329737] installing Xen timer for CPU 5
[ 4.343347] installing Xen timer for CPU 6
[ 4.356975] installing Xen timer for CPU 7
[ 4.357106] Brought up 8 CPUs
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 20:32 ` Liwei
@ 2011-06-27 21:09 ` Liwei
2011-06-28 18:12 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-27 21:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
Hmm, here's the mapped IRQ list, interestingly IRQ 20 is on the list but not 9?
[ 3.611820] acpi_get_override_irq:
[ 3.611821] find_irq_entry:
[ 3.611823] apic: 0 pin: 9 type: 0 mpc_ioapic_id: 8 MP_APIC_ALL: 255
[ 3.611825] i: 0 irqtype: 0 dstapic: 8 dstirq: 2
[ 3.611827] i: 1 irqtype: 0 dstapic: 8 dstirq: 20
[ 3.611829] i: 2 irqtype: 0 dstapic: 8 dstirq: 1
[ 3.611831] i: 3 irqtype: 0 dstapic: 8 dstirq: 3
[ 3.611833] i: 4 irqtype: 0 dstapic: 8 dstirq: 4
[ 3.611835] i: 5 irqtype: 0 dstapic: 8 dstirq: 5
[ 3.611836] i: 6 irqtype: 0 dstapic: 8 dstirq: 6
[ 3.611838] i: 7 irqtype: 0 dstapic: 8 dstirq: 7
[ 3.611840] i: 8 irqtype: 0 dstapic: 8 dstirq: 8
[ 3.611842] i: 9 irqtype: 0 dstapic: 8 dstirq: 10
[ 3.611844] i: 10 irqtype: 0 dstapic: 8 dstirq: 11
[ 3.611846] i: 11 irqtype: 0 dstapic: 8 dstirq: 12
[ 3.611848] i: 12 irqtype: 0 dstapic: 8 dstirq: 13
[ 3.611850] i: 13 irqtype: 0 dstapic: 8 dstirq: 14
[ 3.611852] i: 14 irqtype: 0 dstapic: 8 dstirq: 15
[ 3.611853] idx = -1 < 0, returning -1
On 28 June 2011 04:32, Liwei <xieliwei@gmail.com> wrote:
> Sorry this took a while. Somehow make decided to recompile everything.
>
> Seems like the reason for IRQ 9 not being remapped is idx = -1.
>
> On 28 June 2011 03:30, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
>> On Tue, Jun 28, 2011 at 03:18:21AM +0800, Liwei wrote:
>>> On 28 June 2011 03:10, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
>>> >
>>> > Another glance shows:
>>> >
>>> > (2.6.32):
>>> > [ 3.502771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
>>> > [ 3.502773] xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3
>>> > [ 3.502775] xen: registering gsi 20 triggering 0 polarity 1
>>> > [ 3.502780] alloc irq_desc for 20 on node 0
>>> >
>>> > So it has IRQ 9 mapped to IRQ 20 while in 3.0:
>>> >
>>> > [ 3.803695] xen: --> pirq=7 -> irq=7
>>> > [ 3.803699] xen: --> pirq=8 -> irq=8
>>> > [ 3.803702] xen: --> pirq=10 -> irq=10
>>> >
>>> > we skip over IRQ 9. We should have gotten something like this:
>>> >
>>> > [ 7.059735] xen_map_pirq_gsi: returning irq 20 for gsi 9
>>> > [ 7.064933] xen: --> pirq=20 -> irq=9
>>> >
>>> > But we did not. If you can instrument 'acpi_get_override_irq' to see
>>> > at which of the numerous 'return -1' it fails that might narrow down
>>> > the issue.
>>> >
>>>
>>> Erm, do you want me to set up some kernel tracing or just add a printk
>>> to acpi_get_override_irq? My kernel hacking foo is very limited.
>>
>> Just splash some printk's around there and print out the values of gsi and pins.
>> Nothing fancy.
>>
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-27 21:09 ` Liwei
@ 2011-06-28 18:12 ` Konrad Rzeszutek Wilk
2011-06-28 18:33 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-28 18:12 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Tue, Jun 28, 2011 at 05:09:55AM +0800, Liwei wrote:
> Hmm, here's the mapped IRQ list, interestingly IRQ 20 is on the list but not 9?
Looks like it. You are also in luck - I found a machine that has the same
exact problem and while it does not bail out when installing the ACPI interpreter
it does get the wrong IRQs for the rest of the devices.
In other words, I can reproduce it here.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-28 18:12 ` Konrad Rzeszutek Wilk
@ 2011-06-28 18:33 ` Liwei
2011-06-28 19:27 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-28 18:33 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 29 June 2011 02:12, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> On Tue, Jun 28, 2011 at 05:09:55AM +0800, Liwei wrote:
>> Hmm, here's the mapped IRQ list, interestingly IRQ 20 is on the list but not 9?
>
> Looks like it. You are also in luck - I found a machine that has the same
> exact problem and while it does not bail out when installing the ACPI interpreter
> it does get the wrong IRQs for the rest of the devices.
>
> In other words, I can reproduce it here.
>
Good to hear.
Would you be able to CC me when you have a patch available so that I
can test it out? I found out that the 3.0 kernel is somehow much more
stable running windows HVMs, so I'd like to explore that.
I'm subscribed to the devel list, but its hard effort keeping up with
the email traffic from it.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-28 18:33 ` Liwei
@ 2011-06-28 19:27 ` Konrad Rzeszutek Wilk
2011-06-28 19:49 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-28 19:27 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Tue, Jun 28, 2011 at 11:33:17AM -0700, Liwei wrote:
> On 29 June 2011 02:12, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> > On Tue, Jun 28, 2011 at 05:09:55AM +0800, Liwei wrote:
> >> Hmm, here's the mapped IRQ list, interestingly IRQ 20 is on the list but not 9?
> >
> > Looks like it. You are also in luck - I found a machine that has the same
> > exact problem and while it does not bail out when installing the ACPI interpreter
> > it does get the wrong IRQs for the rest of the devices.
> >
> > In other words, I can reproduce it here.
> >
>
> Good to hear.
>
> Would you be able to CC me when you have a patch available so that I
Of course.
> can test it out? I found out that the 3.0 kernel is somehow much more
Here it is.
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index aac866e..09077b3 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -344,6 +344,7 @@ static int xen_register_pirq(u32 gsi, int triggering)
struct physdev_map_pirq map_irq;
int shareable = 0;
char *name;
+ bool gsi_override = false;
if (!xen_pv_domain())
return -1;
@@ -360,11 +361,23 @@ static int xen_register_pirq(u32 gsi, int triggering)
if (pirq < 0)
goto out;
- irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
+ /* We are installing the ACPI SCI */
+ if (gsi == acpi_sci_override_gsi) {
+ /* Check whether the GSI != IRQ */
+ acpi_gsi_to_irq(gsi, &irq);
+ printk(KERN_DEBUG "ACPI SCI GSI is %d, and ACPI IRQ thinks it is %d\n", gsi, irq);
+ if (irq != gsi)
+ /* Bugger, we MUST have that IRQ. */
+ gsi_override = true;
+ }
+ if (gsi_override)
+ irq = xen_bind_pirq_gsi_to_irq(irq, pirq, shareable, name);
+ else
+ irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
if (irq < 0)
goto out;
- printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq);
+ printk(KERN_DEBUG "xen: --> pirq=%d -> gsi=%d -> irq=%d\n", pirq, gsi, irq);
map_irq.domid = DOMID_SELF;
map_irq.type = MAP_PIRQ_TYPE_GSI;
@@ -414,6 +427,7 @@ static __init void xen_setup_acpi_sci(void)
int rc;
int trigger, polarity;
int gsi = acpi_sci_override_gsi;
+ int irq = gsi;
if (!gsi)
return;
@@ -426,12 +440,14 @@ static __init void xen_setup_acpi_sci(void)
}
trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
-
+
+ acpi_gsi_to_irq(gsi, &irq);
+
printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
- "polarity=%d\n", gsi, trigger, polarity);
+ "polarity=%d irq %d\n", gsi, trigger, polarity, irq);
gsi = xen_register_gsi(gsi, trigger, polarity);
- printk(KERN_INFO "xen: acpi sci %d\n", gsi);
+ printk(KERN_INFO "xen: acpi sci %d -> irq %d\n", gsi, irq);
return;
}
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-28 19:27 ` Konrad Rzeszutek Wilk
@ 2011-06-28 19:49 ` Liwei
2011-06-28 19:51 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-28 19:49 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 29 June 2011 03:27, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
>
> Here it is.
>
----snip----
Okay, that's quick...
The patch's for 2.6.39 right? Seems to be slightly different in 3.0.
May have to manually patch it.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-28 19:49 ` Liwei
@ 2011-06-28 19:51 ` Konrad Rzeszutek Wilk
2011-06-28 19:55 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-28 19:51 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Wed, Jun 29, 2011 at 03:49:07AM +0800, Liwei wrote:
> On 29 June 2011 03:27, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> >
> > Here it is.
> >
> ----snip----
>
> Okay, that's quick...
>
> The patch's for 2.6.39 right? Seems to be slightly different in 3.0.
Uh, it was against 3.0..
> May have to manually patch it.
<nods> Should be easy enough?
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-28 19:51 ` Konrad Rzeszutek Wilk
@ 2011-06-28 19:55 ` Liwei
2011-06-28 20:44 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-28 19:55 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 29 June 2011 03:51, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> On Wed, Jun 29, 2011 at 03:49:07AM +0800, Liwei wrote:
>> ----snip----
>>
>> Okay, that's quick...
>>
>> The patch's for 2.6.39 right? Seems to be slightly different in 3.0.
>
> Uh, it was against 3.0..
>> May have to manually patch it.
>
> <nods> Should be easy enough?
>
That's weird.. looking at both Jeremy and your repos, the xen.c files
from master and 3.0 are very different from the one the patch is based
on.
http://git.kernel.org/?p=linux/kernel/git/konrad/xen.git;a=blob;f=arch/x86/pci/xen.c;h=e6ad37e6b8c7aaad8216e6ae7e0786420a6f1eb8;hb=9b189285cb4030ea25f17cbe33946ce1f0ab7cd8
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-28 19:55 ` Liwei
@ 2011-06-28 20:44 ` Konrad Rzeszutek Wilk
2011-06-29 13:09 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-06-28 20:44 UTC (permalink / raw)
To: Liwei; +Cc: xen-devel
On Wed, Jun 29, 2011 at 03:55:42AM +0800, Liwei wrote:
> On 29 June 2011 03:51, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> > On Wed, Jun 29, 2011 at 03:49:07AM +0800, Liwei wrote:
> >> ----snip----
> >>
> >> Okay, that's quick...
> >>
> >> The patch's for 2.6.39 right? Seems to be slightly different in 3.0.
> >
> > Uh, it was against 3.0..
> >> May have to manually patch it.
> >
> > <nods> Should be easy enough?
> >
>
> That's weird.. looking at both Jeremy and your repos, the xen.c files
> from master and 3.0 are very different from the one the patch is based
> on.
Oh, you are using my branch! I was thinking you were using the 3.0-rc4 virgin
kernel (ie, from ftpkernel.org)
There are some cleanups in there. Try this patch instead:
commit c79ba10a5de908ae48643a9a0d74bc6da3cb4b66
Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Tue Jun 28 15:48:38 2011 -0400
xen/pci: Use the INT_SRC_OVR IRQ (instead of GSI) to preset the ACPI SCI IRQ.
In the past we would use the GSI value to preset the ACPI SCI
IRQ which worked great as GSI == IRQ:
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
While that is most often seen, there are some oddities:
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
which means that GSI 20 (or pin 20) is to be override for IRQ 9.
Our code that presets the interrupt for ACPI SCI however would
use the GSI 20 instead of IRQ 9 ending up with:
xen: sci override: global_irq=20 trigger=0 polarity=1
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=20
xen: acpi sci 20
.. snip..
calling acpi_init+0x0/0xbc @ 1
ACPI: SCI (IRQ9) allocation failed
ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20110413/evevent-119)
ACPI: Unable to start the ACPI Interpreter
as the ACPI interpreter made a call to 'acpi_gsi_to_irq' which
got the value 9 returned. It used that value to request the IRQ 9
and since it was not preset it would fail.
The fix is to recognize that for interrupts that are overriden (in our
case we only care about the ACPI SCI) we should use the IRQ number
to present the IRQ instead of the using GSI. End result is that we get:
xen: sci override: global_irq=20 trigger=0 polarity=1
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=9 (gsi=9)
xen: acpi sci 9
which fixes the ACPI interpreter failing.
Reported-by: Liwei <xieliwei@gmail.com>
[http://lists.xensource.com/archives/html/xen-devel/2011-06/msg01727.html]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index e6ad37e..62a08d9 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -93,11 +93,29 @@ static int xen_register_pirq(u32 gsi, int triggering, bool alloc_pirq)
name = "ioapic-level";
}
+ /* Before we bind the GSI to a Linux IRQ, check whether
+ * we need to override it with bus_irq (IRQ) value. Usually for
+ * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
+ * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
+ * but there are oddballs where the IRQ != GSI:
+ * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
+ * which ends up being: gsi_to_irq[9] == 20
+ * (which is what acpi_gsi_to_irq ends up calling when starting the
+ * the ACPI interpreter and keels over since IRQ 9 has not been
+ * setup as we had setup IRQ 20 for it).
+ */
+ if (acpi_sci_override_gsi == gsi) {
+ acpi_gsi_to_irq(gsi, &irq);
+ if (gsi != irq)
+ /* Bugger, we MUST have that IRQ! */
+ gsi = irq;
+ }
irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
if (irq < 0)
goto out;
- printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, map_irq.pirq);
+ printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n",
+ map_irq.pirq, irq, gsi);
out:
return irq;
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-28 20:44 ` Konrad Rzeszutek Wilk
@ 2011-06-29 13:09 ` Liwei
2011-06-29 13:37 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Liwei @ 2011-06-29 13:09 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 29 June 2011 04:44, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
>
> Oh, you are using my branch! I was thinking you were using the 3.0-rc4 virgin
> kernel (ie, from ftpkernel.org)
Hmm, I've always wondered, which would be a better choice for a Dom0
kernel? I've always thought Jeremy's and yours would be better since
they have xen specific patches/bug fixes. Is there a reason to favour
the vanilla kernels?
>
> There are some cleanups in there. Try this patch instead:
>
----snip----
Sweet! The patch works perfectly and I've upgraded to 3.0 and the
latest xen. PCI passthrough on windows HVM is very stable too (used to
crash every few hours, and sound goes crazy after a while), up for
almost 12 hours with no issues.
Thanks! =)
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-29 13:09 ` Liwei
@ 2011-06-29 13:37 ` Liwei
0 siblings, 0 replies; 24+ messages in thread
From: Liwei @ 2011-06-29 13:37 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
On 29 June 2011 21:09, Liwei <xieliwei@gmail.com> wrote:
----snip----
> Sweet! The patch works perfectly and I've upgraded to 3.0 and the
> latest xen. PCI passthrough on windows HVM is very stable too (used to
> crash every few hours, and sound goes crazy after a while), up for
> almost 12 hours with no issues.
>
> Thanks! =)
>
Also, a minor note, I noticed that on 2.6.39 and above, the
pci-list-assignable-devices command is not working, but PCI
passthrough works nonetheless:
# xm pci-list-assignable-devices
Error: pciback/pci-stub not loaded?
# xl pci-list-assignable-devices
libxl: error: libxl_pci.c:509:libxl_device_pci_list_assignable: Looks
like pciback driver not loaded
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
@ 2011-06-29 14:23 Konrad Wilk
2011-06-29 15:20 ` Liwei
0 siblings, 1 reply; 24+ messages in thread
From: Konrad Wilk @ 2011-06-29 14:23 UTC (permalink / raw)
To: xieliwei; +Cc: xen-devel
----- xieliwei@gmail.com wrote:
> On 29 June 2011 04:44, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> wrote:
> >
> > Oh, you are using my branch! I was thinking you were using the
> 3.0-rc4 virgin
> > kernel (ie, from ftpkernel.org)
>
> Hmm, I've always wondered, which would be a better choice for a Dom0
> kernel? I've always thought Jeremy's and yours would be better since
> they have xen specific patches/bug fixes. Is there a reason to favour
We have "earlier" patches. Meaning the #master branches has patches
that are going to be in proposed for 3.1. So you get the extra fancy stuff before it is
integrated in the vanilla.
> the vanilla kernels?
Mostly just separation of patches. The "extra fancy stuff" could bring in
bugs so if you use the vanilla kernel you would not trip over them.
And the #master in my case did have some extra fancy stuff in the Xen PCI - so
I was trying to isolate whether the issue you were tripping over was the fault
of the new code or something that has been in there since 2.6.37. It was the latter.
Besides that - in the past we had a backlog of patches to make Xen work nicely -
but almost all (except the #stable/vga.support) are in the upstream kernel.
So it is more of "stable" (vanilla) vs "development" (our #master or #devel/next-3.0
branches).
>
> >
> > There are some cleanups in there. Try this patch instead:
> >
> ----snip----
>
> Sweet! The patch works perfectly and I've upgraded to 3.0 and the
Great. Is it OK if I stick 'Tested-by:' on the patch?
> latest xen. PCI passthrough on windows HVM is very stable too (used
> to
> crash every few hours, and sound goes crazy after a while), up for
> almost 12 hours with no issues.
>
> Thanks! =)
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Re: "ACPI: Unable to start the ACPI Interpreter"
2011-06-29 14:23 Konrad Wilk
@ 2011-06-29 15:20 ` Liwei
0 siblings, 0 replies; 24+ messages in thread
From: Liwei @ 2011-06-29 15:20 UTC (permalink / raw)
To: Konrad Wilk; +Cc: xen-devel
On 29 June 2011 22:23, Konrad Wilk <konrad.wilk@oracle.com> wrote:
>
> ----- xieliwei@gmail.com wrote:
>
>> Hmm, I've always wondered, which would be a better choice for a Dom0
>> kernel? I've always thought Jeremy's and yours would be better since
>> they have xen specific patches/bug fixes. Is there a reason to favour
>
> We have "earlier" patches. Meaning the #master branches has patches
> that are going to be in proposed for 3.1. So you get the extra fancy stuff before it is
> integrated in the vanilla.
>
>> the vanilla kernels?
>
> Mostly just separation of patches. The "extra fancy stuff" could bring in
> bugs so if you use the vanilla kernel you would not trip over them.
> And the #master in my case did have some extra fancy stuff in the Xen PCI - so
> I was trying to isolate whether the issue you were tripping over was the fault
> of the new code or something that has been in there since 2.6.37. It was the latter.
>
> Besides that - in the past we had a backlog of patches to make Xen work nicely -
> but almost all (except the #stable/vga.support) are in the upstream kernel.
>
> So it is more of "stable" (vanilla) vs "development" (our #master or #devel/next-3.0
> branches).
Alright, understood. Thanks for explaining!
>> Sweet! The patch works perfectly and I've upgraded to 3.0 and the
>
> Great. Is it OK if I stick 'Tested-by:' on the patch?
>
I have only two systems to test on and didn't really do any
complicated testing other than load testing and verifying that the
correct IRQ number for SCI is used, but the patch is a simple and
straightforward one, so I guess if you're okay with it, I'm okay too.
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2011-06-29 15:20 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-24 18:55 "ACPI: Unable to start the ACPI Interpreter" Liwei
2011-06-25 12:33 ` Liwei
[not found] ` <20110627133936.GB6978@dumpdata.com>
2011-06-27 15:12 ` Liwei
2011-06-27 16:32 ` Konrad Rzeszutek Wilk
2011-06-27 16:59 ` Liwei
2011-06-27 17:33 ` Konrad Rzeszutek Wilk
2011-06-27 18:23 ` Liwei
2011-06-27 18:59 ` Konrad Rzeszutek Wilk
2011-06-27 19:10 ` Konrad Rzeszutek Wilk
2011-06-27 19:18 ` Liwei
2011-06-27 19:30 ` Konrad Rzeszutek Wilk
2011-06-27 20:32 ` Liwei
2011-06-27 21:09 ` Liwei
2011-06-28 18:12 ` Konrad Rzeszutek Wilk
2011-06-28 18:33 ` Liwei
2011-06-28 19:27 ` Konrad Rzeszutek Wilk
2011-06-28 19:49 ` Liwei
2011-06-28 19:51 ` Konrad Rzeszutek Wilk
2011-06-28 19:55 ` Liwei
2011-06-28 20:44 ` Konrad Rzeszutek Wilk
2011-06-29 13:09 ` Liwei
2011-06-29 13:37 ` Liwei
-- strict thread matches above, loose matches on Subject: below --
2011-06-29 14:23 Konrad Wilk
2011-06-29 15:20 ` Liwei
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.