From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3
Date: Mon, 4 Jul 2011 23:58:58 +0200 [thread overview]
Message-ID: <20110704235858.51e11bf8@wker> (raw)
In-Reply-To: <1303343572-19972-25-git-send-email-jkridner@beagleboard.org>
On Wed, 20 Apr 2011 18:52:48 -0500
Jason Kridner <jkridner@beagleboard.org> wrote:
> From: Syed Mohammed Khasim <khasim@ti.com>
>
> Supports dynamic panel configuration
> Supports dynamic tv standard selection
> Adds support for DSS register access through generic APIs
>
> Incorporated DSS register access using structures.
>
> Previous discussions are here
> http://www.mail-archive.com/u-boot at lists.denx.de/msg27150.html
> ---
> v2 updates:
> * Enable panel output for BeagleBoard
> * BeagleBoard: Update DVI-D orange screen frequencies for xM
>
> v3 updates:
> * Remove non-platform (OMAP3) updates
>
> Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
> ---
> arch/arm/include/asm/arch-omap3/dss.h | 173 +++++++++++++++++++++++++++++++++
> drivers/video/omap3_dss.c | 130 +++++++++++++++++++++++++
> 2 files changed, 303 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-omap3/dss.h
> create mode 100644 drivers/video/omap3_dss.c
applied to u-boot-video/master after fixing the commit
description to include SoB lines. Thanks!
Anatolij
next prev parent reply other threads:[~2011-07-04 21:58 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-20 23:52 [U-Boot] [PATCH] BeagleBoard updates rebased on u-boot-ti and debugged Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: fixed typo in typecast Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] Corrected LED name match finding Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: fix LED 0/1 in driver Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: added cmd_led to Makefile Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: correct off/on locations in structure Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: remove trailing whitespace Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: loop through all leds Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: fixup help/usage Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: Pin mux initialization glitch fix Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: Switch default console from ttyS2 to ttyO2 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: Remove omapfb.debug=y from Beagle and Overo env settings Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: reduce BOOTDELAY to 3 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: change default resolution to VGA Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: don't suck in blank line Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: make mtest run Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: increase command-line functionality Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: load kernel via MMC ext2 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: add optargs/buddy/camera Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: add ramboot Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v2] BeagleBoard: Added userbutton command Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: use the USERBUTTON command Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] video: DSS makefile update Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: enable DSS Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] TWL4030/BeagleBoard: Added hub power enable Jason Kridner
2011-04-21 6:29 ` [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor Igor Grinberg
2011-04-21 6:26 ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Igor Grinberg
2011-07-04 21:58 ` Anatolij Gustschin [this message]
2011-08-04 20:54 ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Wolfgang Denk
2011-08-04 21:14 ` Jason Kridner
2011-08-04 21:02 ` Wolfgang Denk
2011-07-04 21:51 ` [U-Boot] [PATCH] video: update Makefile to include OMAP3 DSS driver Anatolij Gustschin
2011-07-04 22:40 ` Anatolij Gustschin
2011-04-21 5:58 ` [U-Boot] [PATCH] led: correct off/on locations in structure Igor Grinberg
2011-04-30 5:46 ` [U-Boot] [beagleboard] [PATCH] BeagleBoard: fixed typo in typecast Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110704235858.51e11bf8@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.