From: Dirk Behme <dirk.behme@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [beagleboard] [PATCH] BeagleBoard: fixed typo in typecast
Date: Sat, 30 Apr 2011 07:46:46 +0200 [thread overview]
Message-ID: <4DBBA246.7030604@googlemail.com> (raw)
In-Reply-To: <1303343572-19972-3-git-send-email-jkridner@beagleboard.org>
On 21.04.2011 01:52, Jason Kridner wrote:
> Without this patch, you should get a warning.
>
> Signed-off-by: Jason Kridner<jkridner@beagleboard.org>
> ---
> board/ti/beagle/beagle.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
> index 52a7f93..c0cab9e 100644
> --- a/board/ti/beagle/beagle.c
> +++ b/board/ti/beagle/beagle.c
> @@ -171,7 +171,7 @@ int misc_init_r(void)
> {
> struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
> struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
> - struct control_prog_io *prog_io_base = (struct gpio *)OMAP34XX_CTRL_BASE;
> + struct control_prog_io *prog_io_base = (struct control_prog_io *)OMAP34XX_CTRL_BASE;
>
> /* Enable i2c2 pullup resisters */
> writel(~(PRG_I2C2_PULLUPRESX),&prog_io_base->io1);
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
This should be applied to fix the mainline compiler warning
beagle.c: In function 'misc_init_r':
beagle.c:174: warning: initialization from incompatible pointer type
introduced by commit d4e53f063dd25e071444b87303573e7440deeb89
("OMAP3: BeagleBoard: Enable pullups on i2c2.").
Thanks
Dirk
prev parent reply other threads:[~2011-04-30 5:46 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-20 23:52 [U-Boot] [PATCH] BeagleBoard updates rebased on u-boot-ti and debugged Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: fixed typo in typecast Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] Corrected LED name match finding Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: fix LED 0/1 in driver Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: added cmd_led to Makefile Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: correct off/on locations in structure Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: remove trailing whitespace Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: loop through all leds Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: fixup help/usage Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: Pin mux initialization glitch fix Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: Switch default console from ttyS2 to ttyO2 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: Remove omapfb.debug=y from Beagle and Overo env settings Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: reduce BOOTDELAY to 3 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: change default resolution to VGA Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: don't suck in blank line Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: make mtest run Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: increase command-line functionality Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: load kernel via MMC ext2 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: add optargs/buddy/camera Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: add ramboot Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v2] BeagleBoard: Added userbutton command Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: use the USERBUTTON command Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] video: DSS makefile update Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: enable DSS Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] TWL4030/BeagleBoard: Added hub power enable Jason Kridner
2011-04-21 6:29 ` [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor Igor Grinberg
2011-04-21 6:26 ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Igor Grinberg
2011-07-04 21:58 ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Anatolij Gustschin
2011-08-04 20:54 ` Wolfgang Denk
2011-08-04 21:14 ` Jason Kridner
2011-08-04 21:02 ` Wolfgang Denk
2011-07-04 21:51 ` [U-Boot] [PATCH] video: update Makefile to include OMAP3 DSS driver Anatolij Gustschin
2011-07-04 22:40 ` Anatolij Gustschin
2011-04-21 5:58 ` [U-Boot] [PATCH] led: correct off/on locations in structure Igor Grinberg
2011-04-30 5:46 ` Dirk Behme [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DBBA246.7030604@googlemail.com \
--to=dirk.behme@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.